REPAIR TO BOARD HARD STEEL (MAP), CHARPOY GI PIPE, CHARPOY MS

Amount

REPAIR TO BED PLYWOOD TOP (FD-246) :-

Material and labour for in replacement of top of bed ply wood with 12 mm thick commercial plywood, BWR grade, ISI marked of make Kit ply/century ply/Archid ply fixed on the top of bed plywood with screws complete, all specified and shown in drawing and directed .

Material and labour for in replacement of leg using old serviceable short rail obtained from respective item including cutting and made to shape and size of leg complete, all specified and shown in drawing and as directed .

Material and labour for in replacement of long rail of bed ply wood of required size made of well seasoned 1st class teak wood, complete, all specified and shown in drawing and directed.

Material and labour for in replacement of short rail using old serviceable long rail obtained from here in before including cutting and made to shape and size of short rail complete, all specified and shown in drawing and as directed .

Material and labour for in replacement of unserviceable head board of bed ply wood with new head board complete all as per drawing and specified and directed.

Material and labour for in replacement of unserviceable foot board of bed ply wood with new foot board complete all as per drawing and specified and directed.

Material and labour for preparation of old / new wooden surfaces of any description by scrapping, rubbed down by emery paper including filled up the cracks and pores with a paste and putty and applying two coats of French polish of approved quality with high gloss finish complete all specified and directed.

Charpoy GI Pipe With Ply Top (FD-220) :-

Material and labour for in replacement of 12 mm thick plywood top , commercial type, BWR grade, ISI marked of (Make : Century ply/ Kit ply / Archid ply), in single piece fixed on existing charpoy GI pipe after tightening of frame of charpoy if required including nuts, bolts of not less than 8mm dia and GI washers (minimum 10 Nos.for each charpoy) and taking out existing nylon newar complete all as specified and shown in drawing and directed.

Material and labour for mild steel flat iron 850 mm long of size 40mmx5 mm, welded to long rails horizontally (one end of each long rail) at equal distance including necessary cuttings, weldings , drilling holes where required for fixing plywood and painting to flat iron piece with two coats of black synthetic enameled paint over a coat of red oxide zinc chrome primer after preparation of new steel surface complete all as specified and directed.

Dismentling / opening / loosening of GI charpoy as deemed necessary, taking out defective long rail and Supply & fixing new long rail made of 32mm bore GI pipe, medium grade, ISI marked, including necessary drilling, threading, etc. and reassembling the charpoy tight and fit complete all as specified and shown in drg and directed. Make of Pipe : JINDAL.

Material and labour for short rail of GI Charpoy made from long rail retrieved from Srl item No. 2.03 above including necessary cutting, threading, welding, etc. and re-assembling the charpoy tight and fit including taking out defective short rail complete all as specified and shown in drg. and directed.

Material and labour for leg of GI Charpoy made from short rail retrieved from Srl item No.2.04 above including necessary cutting, threading, welding, etc. including provision of MS plate 32mm dia 3mm thick to bottom of leg black painted with all edges of plate grinded to eliminate sharp edges and re-assembling the charpoy tight and fit including taking out defective leg complete all as specified and shown in drg. and directed.

Supply and fix in replacement of elbow, 32mm dia, heavy duty, ISI marked for GI pipe charpoy complete all as specified and shown in drawing and directed.

Supply and fix in replacement of GI check nut hexagonal, 32mm bore for GI pipe charpoy complete all as specified and shown in drawing and directed.

Supply and fix in replacement of MS plate/wooden plug and S&F 6 mm thick and 32mm dia MS Plate welded to bottom of each leg of GI Charpoy including grinding of extra material complete complete all as specified and shown in drawing and directed.

Bed Hard Steel (FD/E6/MAP/08(R) :-

Material and labour for for in replacement of top of bed ply wood with 12 mm thick commercial plywood, BWR grade, ISI marked of make Kit ply/century ply/Archid ply fixed on the top of bed plywood with screws fixed with existing mild steel GI bolts of 6mm dia of suitable lengths including washers and nuts complete, all as specified and shown in drawing and as directed .

Material and labour for welding of broken joints of Bed Hard Steel including preparation of surface complete, rest all as shown on drg and directed.

Material and labour in reapir of head board of size 635 mm X 200 mm made from 18mm thick pre-laminated particle board exterior grade both side decorative finish shade as approved by GE complete including removal of damaged head board all as specified on drawing and directed.

Material and labour in reapir of foot board of size 635 mm X 200 mm made from 18mm thick pre-laminated particle board exterior grade both side decorative finish shade as approved by GE complete including removal of damaged head board all as specified on drawing and directed.

Material and labour for for in replacement of Rubber shoe and new rubber shoe of size 25mm square to be fixed as per sample

Material and labour for preparation of old / new steel surfaces of any description by scrapping, rubbed down by emery paper and applying two coats of black synthetic enamel paint over a coat of red oxide primer of approved quality complete all as specified and directed.

Charpoy IP folding with Hard top (FD-388) :-

Material and labour for in replacement of top of Charpoy IP folding Hard top with 12 mm thick commercial plywood, BWR grade, ISI marked of make Kit ply/century ply/Archid ply fixed on the top of bed plywood with screws fixed with existing mild steel GI bolts of 6mm dia of suitable lengths including washers and nuts complete, all as specified and shown in drawing and directed.

Material and labour for welding of broken joints of Charpoy IP folding with Hard top including preparation of surface complete, rest all as shown on drg and directed.

Material and labour for preparation of old / new steel surfaces of any description by scrapping, rubbed down by emery paper and applying two coats of black synthetic enamel paint over a coat of red oxide primer of approved quality complete all as specified and directed.

Charpoy IP Hard top (FD/MAP-II/01) :-

M&L for in replacement of plywood from Charpoy IP Hard top with new 12mm thick plywood top of size 1980mmx900mm BWP grade type ISI markded (Make:Kit ply/century ply/Archid ply) fixed with existing mild steel GI bolts of 6mm dia of suitable lengths including washers and nuts all as specified in drg and directed.

Material and labour for welding of broken joints of Bed Hard Steel including preparation of surface complete, rest all as shown on drg and directed.

Material and labour for preparation of old / new steel surfaces of any description by scrapping, rubbed down by emery paper and applying two coats of black synthetic enamel paint over a coat of red oxide primer of approved quality complete all as specified and directed.

M& L for in replacement of Rubber shoe with new rubber shoe of size 25mm square to be fixed as per sampled .FD/MAP-II/01.of approved quality complete all as specified and directed.

Supply of Items as approved by Engr- In -Charge :-

Supply of Table 3ft by 2ft Top

Supply of Peg table Top

Supply of Center Table Top

Supply of Teapoy Top

Supply of Table Dining six person Top

Supply of Table Dining eight person Top

Supply of Table Dining 4 person Top

Supply of Computer Table Top of size 3ft by 2ft

Supply of Ahesive of One Litre Make -Marine fevicol

Supply of Touch Wood Make-Asian of 1 litre

Supply of Tarpetine Oil of 1 Litre

Supply of Thinner of 1 Litre of MAKE Duco

Suplly of Fancy Knob

Supply of Fancy Handle of Size 4 inch

Supply of Telescopic Channel of Size 1.5 ft of Make Godrej,Hettich

Supply of Chair Hydraulic Gas Lift

Supply of lock for Almirah large Steel ( Make : Harrison/ Godrej)

Supply of lock for Table Writing

Supply of PadLock Make Harison,Godrej Size 50mm

Supply of PadLock Make Harison,Godrej Size 75mm

Supply of Chandras

Supply of Chapra

Supply of Siller

Supply of Lal Mitti

Supply of Pili Mitti

Supply ofSafed Mitti

Supply of Brown Mitti

Supply of LD 90 Number

Supply of OG Color Paint Make Asian

Supply of White Color Paint Make Asian

Supply of Black Color Paint Make Asian

Supply of Roll Paper 60 Number

Supply of Roll Paper 100 Number (Water Paper

Supply of Sky Blue Paint Make Asian

Sipply of Yellow Paint Make Asian

Supply of Sunmica of thickness 0.9mm as per approved sample of size 8ft x 4 ft as directed by Engineer -In- Charge.

Supply of Nails 1.0 inch

Supply of Nails 1.5 inch

Supply of Nails 2.0 inch

Supply of Nails 2.5 inch

Supply of Nails 3.00 inch

Supply of Star pench 25mm

Supply of Star pench 35mm

Supply of Star pench 45mm

Supply of Star pench 75mm

Supply of Plain glass of size mirror 8mm of make Modiguard

Supply of Plain glass of size mirror 12mm of make Modiguard

Suplly of Sulation Hetax of 250 gm

Supply of Chip Beat 0.75 inch

Supply of Chip Beat 1.00 inch

Supply of Chip Beat 1.50 inch

Supply of Half Round Beat 0.75 inch

Supply of Half Round Beat 1.00 inch

Supply of Half Round Beat 1.50 inch

Supply of Scantling Ist Class Teak Wood of various of Size as directed by Engineer -In- Charge.

Recanning of various types of chairs :-

Material and labour for recanning of wooden chair with plastic cane half round 2mm wide 0.35 mm thick (4mm wide semi round for border) best quality as per Godrej pattern including removing of old cane , repairing of broken part with new one with first clas Teak wood including all wooden part and fillet of chair complete all as specified and directed. Make of cane : Premier.

Material and labour for re-caning of chair verandah with plastic cane half round 4mm wide 0.4mm thick, best quality, as per Godrej pattern including removing of old cane complete all as specified and directed. Make of cane : Premier.

Material and labour for preparing of old surface of chair verandah steel , welding and applying one coat of synthetic enamel white paint including provision of 4 Nos rubber shoes for each chair complete all as specified and directed.

Material and labour for preparation of old/new wooden surfaces of any description by scrapping, rubbed down by emery paper including filled up the cracks and pores with a paste and putty and applying two coats of French polish of approved quality with high gloss finish complete all as specified and as directed:-

Chair Easy

Chair Writing

Chair Dining

Table Dining 6 person

Table Dining 8 Person

Table Dining 4 Person

Peg Table

Sofa Set 5 Seater

Sofa Set 4 Seater

Side Board

REPAIRS TO ALMIRAH LARGE STEEL (ALL TYPES), FD-67M, 1031 &1033 :-

Material and labour in replacement for lock of almirah large steel of Make : Harison, Godrej of suitable size with duplicate keys as per sample, fixed with screws complete all as specified and shown in drawing and directed by the Engineer-in-Charge.

Material and labour in replacement for locking device with cover of almirah steel large including lock bar complete all as specified and shown in drawing and directed by the Engineer-in-Charge.

Material and labour for repair to door shutter with denting and necessary adjustment as required complete all as specified and directed by the Engineer-in-Charge..

Material and labour in replacement for door shutter of almirah large steel made of 1 mm thick mild steel black sheet complete all as specified and shown in drawing and directed by the Engineer-in-Charge.

Material and labour in replacement for handle of almirah large steel chromium plated fixed with screws, complete all as specified and shown in drawing and directed by the Engineer-in-Charge.

Material and labour in replacement for leg of almirah large steel made of 1 mm thick mild steel black sheet including necessary cuttings, made to shape, welding etc. complete all as specified and shown in drawing and directed by the Engineer-in-Charge.

Material and labour in replacement for hinge of almirah large steel,mild steel, 100mm size of approved quality fixed with screws complete all as specified and shown in drawing and directed by the Engineer-in-Charge.

Material and labour in replacement for shelf of almirah large steel made of 1 mm thick mild steel black sheet including necessary cuttings, made to shape, welding etc. complete all as specified and shown in drawing and directed by the Engineer-in-Charge.

Material and labour for preparation of old / new painted steel surfaces (external and internal) and applying two coat of synthetic enamel paint by spray painting including preparation of surfaces and filling cavities with putty wherever required complete all as specified and directed by the Engineer-in-Charge.

REPAIRS TO ALMIRAH MEDIUM STEEL WITH SHELVE, FD-67M & FD-1032 :-

Material and labour in replacement for lock of almirah medium steel of Make : Harison, Godrej of suitable size with duplicate keys as per sample, fixed with screws complete all as specified and shown in drawing and directed by the Engineer-in-Charge.

Material and labour in replacement for locking device with cover of almirah steel medium including lock bar complete all as specified and shown in drawing and directed by the Engineer-in-Charge.

Material and labour for repair to door shutter with denting and necessary adjustment as required complete all as specified and directed by the Engineer-in-Charge.

Material and labour in replacement for door shutter of almirah medium steel made of 1 mm thick mild steel black sheet complete all as specified and shown in drawing and directed by the Engineer-in-Charge.

Material and labour in replacement for handle of almirah medium steel chromium plated fixed with screws, complete all as specified and shown in drawing and directed by the Engineer-in-Charge.

Material and labour in replacement for leg of almirah medium steel made of 1 mm thick mild steel black sheet including necessary cuttings, made to shape, welding etc. complete all as specified and shown in drawing and directed by the Engineer-in-Charge.

Material and labour in replacement for hinge of almirah medium steel,mild steel, 75mm size of approved quality fixed with screws complete all as specified and shown in drawing and directed by the Engineer-in-Charge.

Material and labour in replacement for shelf of almirah medium steel made of 1 mm thick mild steel black sheet including necessary cuttings, made to shape, welding etc. complete all as specified and shown in drawing and directed by the Engineer-in-Charge.

Material and labour for preparation of old / new painted steel surfaces (external and internal) and applying two coat of synthetic enamel paint by spray painting including preparation of surfaces and filling cavities with putty wherever required complete all as specified and directed by the Engineer-in-Charge.

Sofa Set 4/5 seater (FD-281, FD-258, FD-373, FD/MAP/06, FD/MAP-11/02) :-

Material and labour for in replacement of Arm rest made of 1st class teak hard wood of size 70mmx35mm of required shape & length complete all as specified and shown in drawing and as directed

Material and labour for in replacement of front long rail of size 35mmx70mm of required shape & length made of 1st class teak hard wood for 3 seater sofa complete all as specified and shown in drawing and directed.

Material and labour for in replacement of back long rail of size 35mmx70mm of required shape & length made of 1st class teak hard wood for 3 seater sofa complete all as specified and shown in drawing and directed.

Material and labour for in replacement of front rail of size 35mmx70mm of required shape & length made of 1st class teak hard wood for single seater sofa complete all as specified and shown in drawing and directed.

Material and labour for in replacement of back rail of size 35mmx70mm of required shape & length made of 1st class teak hard wood for single seater sofa complete all as specified and shown in drawing and directed.

Material and labour for in replacement of batten of back rest made of 1st class teak hard wood of size 51mmx20mm of required shape & length complete all as specified and shown in drawing and directed

Material and labour for in replacement of batten of seat made of 1st class teak hard wood of size 51mmx20mm of required shape & length complete all as specified and shown in drawing and directed

Material and labour for in replacement of cushion of size 560 mm X 530 mm X 100 mm thick, 40 density (Model name :Primo of make Sleep well /Model name Goldline Plus of make :Kurlon), including tapesty cloth of best quality (cost not less than Rs.400/- per metre ) and stitching in required shade and colour including one side shall be left open by giving proper margin of cloth towards inside upto 2 inch for the purpose of washing to cover complete as per sample all as specified and shown in drawing and directed.

Material and labour for in replacement of leg made of 1 st class teak hard wood of size 70mmx35mm of required shape & length complete all as specified and shown in drawing and directed.

Material and labour for preparation of old/new wooden surfaces by scrapping, rubbed down by emery paper including filled up the cracks and pores with a paste and putty and applying two coats of French polish of approved quality with high gloss finish complete all as specified and directed.

Repair of sofa sets 05 seater (special / TP) :-

Material and labour for in replacement of unserviceable cloth Rexin upholstering from seat and back of sofa set of five seater (Special) with new material such Cloth Rexin of approved quality including 32 density cushion 100mm/110mm high (Model name :Primo of make Sleep well /Model name Goldline Plus of make :Kurlon) as required size and shape and replacement of all spring dumb bell shape 10 gauge with 100mm dia and 100mm/150mm high with new steel spring copper coated, complete duly French polished on wooden surface from all sides complete directed. Note : Cost of cloth / Rexin shall not be less than Rs.500/-RM) and shade shall be as approved by GE Trade pattern/ Godrej/ Methodex/ Durrian complete all as specified and shown in drawing and directed.

Repair of sofa sets 04 seater (special / TP) :-

Material and labour for in replacement of unserviceable cloth Rexin from seat and back of sofa set of four seater (Special) with new material such Cloth Rexin of approved quality including 32 density cushion 100mm/110mm high (Model name :Primo of make Sleep well /Model name Goldline Plus of make :Kurlon) as required size and shape and replacement of all spring dumb bell shape 10 gauge with 100mm dia and 100mm/150mm high with new steel spring copper coated, complete duly French polished on wooden surface from all sides complete directed. Note : Cost of cloth / Rexin shall not be less than Rs.500/-RM) and shade shall be as approved by GE Trade pattern/ Godrej/ Methodex/ Durrian complete all as specified and shown in drawing and directed.

Repair of sofa sets 03 seater (special / TP) :-

Material and labour for in replacement of unserviceable cloth Rexin from seat and back of sofa set of Three seater (Special) with new material such Cloth Rexin of approved quality including 32 density cushion 100mm/110mm high (Model name :Primo of make Sleep well /Model name Goldline Plus of make :Kurlon) as required size and shape and replacement of all spring dumb bell shape 10 gauge with 100mm dia and 100mm/150mm high with new steel spring copper coated, complete duly French polished on wooden surface from all sides complete directed. Note : Cost of cloth / Rexin shall not be less than Rs.500/-RM) and shade shall be as approved by GE Trade pattern/ Godrej/ Methodex/ Durrian complete all as specified and shown in drawing and directed.

Repair of sofa sets 02 seater (special / TP) :-

Material and labour for in replacement of unserviceable cloth Rexin from seat and back of sofa set of Two seater (Special) with new material such Cloth Rexin of approved quality including 32 density cushion 100mm/110mm high (Model name :Primo of make Sleep well /Model name Goldline of make :Kurlon) as required size and shape and replacement of all spring dumb bell shape 10 gauge with 100mm dia and 100mm/150mm high with new steel spring copper coated, complete duly French polished on wooden surface from all sides complete directed. Note : Cost of cloth / Rexin shall not be less than Rs.500/-RM) and shade shall be as approved by GE Trade pattern/ Godrej/ Methodex/ Durrian complete all as specified and shown in drawing and directed.

Repair of sofa sets Single seater (special / TP)

Material and labour for in replacement of unserviceable cloth Rexin from seat and back of sofa set of Single seater (Special) with new material such Cloth Rexin of approved quality including 32 density cushion 100mm/110mm high (Model name :Primo of make Sleep well /Model name Goldline Plus of make :Kurlon) as required size and shape and replacement of all spring dumb bell shape 10 gauge with 100mm dia and 100mm/150mm high with new steel spring copper coated, complete duly French polished on wooden surface from all sides complete directed. Note : Cost of cloth / Rexin shall not be less than Rs.500/-RM) and shade shall be as approved by GE Trade pattern/ Godrej/ Methodex/ Durrian complete all as specified and shown in drawing and directed.

Table Bed Side {FD/E6/MAP/15 (R) } :-

Taking out old unservicable pre-laminated board from the back of table bed side and S&F new back with 18/19 mm thick pre-laminated particle board (exterior grade), ISI marked, commercial type ( Shade and texture natural teak) and 6 mm thick PVC edging all around the table top, complete, all as specified and shown in drawing and as directed .

Taking out old unservicable pre-laminated board from the side of table bed side and S&F new back with 18/19 mm thick pre-laminated particle board (exterior grade), ISI marked, commercial type ( Shade and texture natural teak) and 6 mm thick PVC edging all around the table top, complete, all as specified and shown in drawing and as directed .

Taking out old unserviceable top of table bed side and S&F new top with 18/19 mm thick pre-laminated particle board (exterior grade), ISI marked, commercial type ( Shade and texture natural teak) and 6 mm thick PVC edging all around the table top, complete, all as specified and shown in drawing and as directed .

Taking out old unserviceable powder coated telescopic channels of 1.6mm thick and S & F new powder coated telescopic channels of 1.6mm thick fitted in drawers complete all as specified and shown in drawing and directed.

Taking out old unserviceable drawers of table bed side and S&F new drawers shall be with 18/19 mm thick pre-laminated particle board (exterior grade), ISI marked, commercial type ( Shade and texture natural teak) and 4 mm thick half round first class teak wood edging all around the table top, complete, all as specified and shown in drawing and as directed .

Taking out old broken/ unserviceable handle from table bed side and S&F new handle as approved by GE in table bed side complete all as specified and shown in drawing and as directed

Taking out old PVC edging to table bed side and S&F new PVC edging of 1.5mm thick fix in table bed side complete all as specified and shown in drawing and as directed

M & L for welding of broken joints of Table bed side (MAP) including preparation of surface and applying two coats of black synthetic enamel paint over a coat of red oxide primer complete all as specified and shown in drawing and directed.

Repair to Locker Bed side wooden ( FD-54M ) :-

Material and labour for in replacement of top of Bed side wooden with 18/19mm thick one side teak faced pre laminated particle board, ISI Marked including 6mm thick teak wood edging all-round , complete, all as specified and shown in drawing and as directed .

Material and labour for in replacement of shutter with 18/19mm thick one side teak faced pre laminated particle board ISI Marked alongwith hinges as per drawing and as specified and directed.

Supply and fixing 100 mm long aluminium handle, ‘D’ type, ISI Marked fixed to shutters of locker bed side , complete, all as specified and shown in drawing and as directed .

Material and labour for in replacement of back side of locker bed side with 9 mm thick commercial plywood BWR grade ISI marked , complete, all as specified and shown in drawing and as directed .

Supply and fixing in repair 75mm long , aluminium Hasp and staple, ISI Marked fixed to shutters of locker bed side , complete, all as specified and shown in drawing and as directed .

Supply and fixing in repair CP hanging rod 20mm dia fixed to locker bed side as per drawing and as specified and directed by the Engineer-in-charge.

Material and labour for preparation of old / new wooden surfaces of any description by scrapping, rubbed down by emery paper including filled up the cracks and pores with a paste and putty and applying two coats of French polish of approved quality with high gloss finish complete all as specified and directed.

REPAIR TO TABLE OFFICE OFFICER WOODEN (DB-4120) :-

Material and labour for in replacement of top of table office officer wooden with 18/19 mm thick pre-laminated particle board (exterior grade), ISI marked, commercial type ( Shade and texture natural teak) and 4 mm thick half round first class teak wood edging all around the table top, complete, all as specified and shown in drawing and as directed .

Material and labour for in replacement of leg of table of required size made of well seasoned 1st class teak wood,, complete, all as specified and shown in drawing and as directed .

Material and labour for in replacement of front rail of required size made of well seasoned 1st class teak wood,, complete, all as specified and shown in drawing and as directed .

Material and labour for in replacement of side rail of required size made of well seasoned 1st class teak wood, complete, all as specified and shown in drawing and as directed .

Material and labour for in replacement of drawer with knob of required size made of well seasoned 1st class teak wood, complete all as specified and shown in drawing and as directed .

Material and labour for in replacement of stiffener of required size made of well seasoned 1st class teak wood, complete all as specified and shown in drawing and as directed .

Material and labour for preparation of old / new wooden surfaces of any description by scrapping, rubbed down by emery paper including filled up the cracks and pores with a paste and putty and applying two coats of French polish of approved quality with high gloss finish complete all as specified and directed.

Material and labour for dry cleaning for cloathing, textiles and upholestry using a chemical solvent other than water after preparation of surface including repair and stiching to the following furniture items all over complete and as directed by Engr-in-charge.

Sofa 5 seater with cushion TP

Sofa 4 seater with cushion TP

Sofa 3 seater with cushion TP

Sofa 2 seater with cushion TP

Sofa single seater with cushion TP

Chair dining with cushioned

Note :- Credit shown in credit schedule of tender document shall be considered by the tenderer while quoting the rates of various items. The same shall be recovered from various payment to contractor before handing over old material.

M/S Amar Enterprises

R K GUPTA AND SONS

Mohit Enterprises

M/S SWASTIK BUILDERS

Supreme Builders

Ambrish Builders