Special repair to certain buildings in Tech area and renovation of P-101 Building rest room and wash room and allied work at AF Stn Jaisalmer

Amount

Cutting openings through old stone masonry walls built in cement mortar for door, window and other openings or enlarging existing openings, etc., or cutting out defective masonry for underpinning including providing, fixing and removing, shoring, cleaning and stacking stone and removing surplus to store and rubbish off the premises complete all as specified and directed.

Rolled mild steel as in Joist, channel, tube, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated with Fe-290 (Gde-E-165) fixed as in repair complete all as specified and directed.

Cutting holes exceeding 400 sqcm and not exceeding 0.10 sqm into or through stone walls built in cement mortar or lime mortar and walls of cement concrete and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l as required complete all as specified and directed.

Demolition of brickwork or stone/boulder masonry built in cement mortar including all quoins, arches, pillars, etc. complete all as specified and directed.

Squared rubble walling, Jodhpur type regular coursed, well bonded, bedded and solidly hearted, built in cement mortar (1:6) complete as specified and directed.

All as per serial item No. 05 here-in-before but except stone complete all as specified and directed.

Extra over stone walling for hammer dressing with maximum dipression on face from sraight edge held against the dresses surface n exc 20mm and dressing of face beds and joints as specified to square rubble walling, jodhpur type, brought upto courses complete all as specified and directed.

Decorative false ceiling in split levels with and including GI channels 0.5mm thick Main & secondary & corner angle of appropriate sizes / dimensions 12mm thick Gyprode or other equivalent make ceiling boards, required cut outs for decorative LED lighting & painting with tow coats of plastic paints over a coat of of primer including taking down/dismentling of false ceiling boards complete all as specified and directed.

Solid PVC Wall panelling/Lining consisting of 5mm thick wood grain printed PVC sheet instead of plain colour sheet inclusive of solvent cement and fixing without joint at site on PVC frame as per specifications and complete all as specified and directed. Note:- Rate shall be inclusive of refixing of dismentled E/M fittings and fixtures.

5mm thick PVC sheet fillet of width 35mm with U shape groove of 2mm depth at centre for wall panelling inclusive of fixing on to wall with screws to make PVC frame as per specification complete all as specified and directed.

Light shade double charged Vitrified ceramic tiles 10mm thick (square/ rectangular), polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, as in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 15mm thick screed bed in cement and sand mortar 1:6 complete all as specified.

Light shade double charged Vitrified ceramic tiles 10mm thick (square/ rectangular), polished, on vertical surfaces such as dado, skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 10mm thick rendering in cement & sand mortar 1:4 complete all as specified and directed

Precast cement concrete (1:3:6), type C-1 (using 20mm graded stone aggregate) as solid block masonary exceeding 10cm and set in cement and sand mortar (1:6) complete all as specified and directed.

20mm thick black granite slab/ tiles in floors/treads etc, set & jointed with neat cement slurry over and including 15mm thick screed bed in cement mortar (1:6) and pointed with white cement with admixture of pigment to match with shade of Granite stone including cutting, grinding and polishing (mirror polish i.e. full granite polish as per local trade practice) complete all as specified and as directed.

20mm thick black granite (of any type) work as in skirting/risers over and including 10mm thick screed bed (backing coat) in cement and sand mortar 1:4, jointed with grey cement slurry and pointed with white cement with admixture of pigment to match with shade of granite stone including cutting and polishing (mirror polish i.e. full granite polish as per local trade practice) all as specified & directed.

Granite slab/ tiles 20mm thick (any type) as in walls, mechine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match with shade of granite stone including cutting, grinding and polishing (mirror polish i.e. full granite polish as per local trade practice) complete all as specified and as directed.

Green marble 20mm thick both sides polished machine cut as in urinal partitions of sizes as approved including cutting cheses in walls and setting in neat cement paste complete all as specified & as directed.

Providing Precast Cement Concrete 1:2:4 type B1 (using 20mm graded stone aggregate) as in landing cover slab for manholes and similar articles with plain faces including use and waste of formwork as required and set in cement and sand mortar (1:6) complete all as specified & directed.

Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified.

Pre-laminated particle board 12mm thick (ISI marked), interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work cup board shutters, partions, shelves and similar work fixed as in repair complete all as specified and directed.

Second class soft wood plain fillets, square, rectangular or triangular in section, clean sawn, secured with nails or brads, sectional area exceeding 3 sqcm and not exceeding 6 sqcm complete all as specified and directed.

Stainless steel Butt hinges, 50mm long complete all as specified and directed.

Stainless steel Butt hinges, 100mm long complete all as specified and directed.

Cupboard knobs 40mm dia, fixed with nut, screw and washer of brass, polished complete all as specified and directed.

Sink made of stainless steel 1mm thick for Kitchen or laboratory with plugs, washers and wastes including bedding in cement mortar to dwarf wall or incl fixing cantilever brackets and connecting union to pipe over all size 510mm x 430mm, bowl size 430mm x 380mm with all fitting and fixure fixed complete all as specified and directed.

Cutting out cracks to V-section in existing roofs or terracing, cleaning out, wetting, grouting with cement and sand slurry 1:3 complete all as specified and directed.

Cutting grooves in brick/stone masonry wall for inserting APP membrane 75mm wide and 65mm deep and making good/shaping horizontal face of groove with cement mortar 1:3 or PCC 1:2:4 complete all as specified & as directed.

APP based polymeric membrane minimum weighing 3 Kg/Sqm and minimum 3mm thick reinforced with polyster non wove fabric (weight not less than 150gms/sqm) land on primed surface by LPG torched application over applying evenly one coat of binding material using blown type bitumen confirming to IS-702 grade 85/25 at the rate 1.20 Kg/Sqm over one coat of cold bitumenous oil based primer (IS : 3384) at the rate 250gm/sqm including cleaning surfaces with 10mm thick plaster in cement and mortar (1:4) on fair face of concrete surfaces, finished even and smooth without using extra cement with water proofing compound including dismentling/taking down existing complete all as specified and directed. Note : Water proofing compound will be measured and paid for seperately.

Supply only integral water proofing compound (ISI marked) complete all as specified and directed.

Plain cement concrete (1:3:6) Type C-1, (using 20mm graded stone aggregate) as in roof padding surface fair finished even and smooth without using extra cement complete all as specified and directed.

Taking down chowkhats or frame with shutters (without taking off shutters from the frames), and refixing other opening area exceeding 1.50sqm but not exceeding 4.00 sqm each complete all as specified and directed.

Taking down chowkhats or frame with shutters (without taking off shutters from the frames), area exceeding 1.50sqm but not exceeding 4.00 sqm each complete all as specified and directed.

Factory made 30mm thick flush shutter, solid core construction, with block boards core and plywood face panels, commercial type on both sides (ISI Marked) fixed to chowkhats complete all as specified and directed.

Powder coating standard anodised aluminium extruded sections as in frames for chowkats, doors, windows shutters with style and rails or for fixed glazed partitions wall frame made to shape required fixed with 150mm long screw and rawl plug with one or more rebates including necessary joining cleats, glazing clips, rubber neoprene packing for fixing, anodised aluminium snap beading screws etc complete all as specified and directed.

Anodized aluminium sections as in window and ventilator shutters, side hung type without sash bars (aluminium sections weighing 0.55 kg/m) including necessary jointing cleats, glazing clips, rubber packing, anodized aluminium snap beading, screws, anodized aluminium fittings such as peg stays 150mm long (01 Nos each shutter), extruded anodised aluminium alloy with galvanised mild steel hinge pin, 100mm long (03 Nos each shutter), extruded anodised handle of suitable type (01 No. each shutter) etc. with powder coating (Minimum thickness of powder coating 50 micron) complete all as specified and directed.

Powder coating standard anodised aluminium sections for door shutters (aluminium sections weighing 0.55 Kg/m) including necessary joining cleats, glazing clips, rubber neoprene packing, handle 02 Nos in each door shutter, 04 Nos hinges each shutter, anodised aluminium snap beading, screws etc complete all as specified and directed.

Wood grain printed 2mm PVC sheet fixed or laid on to flush doors by using rubber based adhesive, supplying & fixing at site as per specification complete all as specified and directed.

150mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.

Long latches 150mm long complete all as specified and directed. Make : Prayag, Cat Part No. LB6-0553-AB or equivalent.

Aluminium handle 125mm long cast type, anodized complete all as specified and directed

Brass handle 125mm long cast type, anodized complete all as specified and directed

250mm long Brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed complete all as specified and directed

Aluminium extruded section body door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851-1000mm in width & weight between 61 to 80 Kg, complete all as specified and directed.

Taking down chowkhats or frame (without taking of shutters from the frames) and refixing other opening area not exceeding 1.5 Sqm each complete all as specified and directed.

Taking down chowkhats or frame (without taking of shutters from the frames) area not exceeding 1.5 Sqm each complete all as specified and directed.

Shelf of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (minimum weight 300gms) etc fixed as in repair complete all as specified and directed.

Glass shelf 300mm (with brass) fixed as in repair complete all as specified and directed. Make : Prayag, Cat Part No. BEA-49 or equivalent.

Liquid soap container of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (Minimum weight 105gms) etc fixed as in repair complete all as specified and directed.

Brass soap dish, finish : glossy fixed as in repair complete all as specified and directed. Make : Prayag, Cat Part No. BA-15 or equivalent.

110mm dia pipes PVC (SWR) single socketed, in any length with rubber ring joints, laid in trenches or in floors fixed including taking down old unserviceable pipe complete all as specified and directed.

75mm dia pipes PVC (SWR) single socketed, in any length with rubber ring joints, laid in trenches or in floors fixed including taking down old unserviceable pipe complete all as specified and directed.

110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including taking down old unserviceable pipe complete all as specified and directed.

75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including taking down old unserviceable pipe complete all as specified and directed.

110mm bore PVC (SWR) bend any radius provided fixed complete all as specified and directed.

75mm bore PVC (SWR) bend any radius provided fixed complete all as specified and directed.

110mm bore PVC (SWR) bend any radius provided with access door fixed complete all as specified and directed.

75mm bore PVC (SWR) bend any radius provided with access door fixed complete all as specified and directed.

110mm bore PVC (SWR) vent cowl fixed complete all as specified and directed.

PVC (SWR) floor trap 75mm dia outlet plain with grating including jointing with solvent cement and jointing to waste pipe fixed in cement concrete type B-1:2:4 complete all as specified and directed.

110mm bore PVC (SWR) Junction Single (Single T) equal or unequal provided with access door fixed as in repair complete all as specified and directed.

Galvanized steel water tubing medium grade of 15mm bore with & including all fittings fixed to walls and ceiling or laid in floors, including taking up or down old unserviceable steel water tubing and connections of 15mm bore, complete all as specified and directed.

Galvanized steel water tubing medium grade of 20mm bore with & including all fittings fixed to walls and ceiling or laid in floors, including taking up or down old unserviceable steel water tubing and connections of 20mm bore, complete all as specified and directed.

Stop cock fancy type with 15mm bore and cup (concealed type) of cast copper alloy chromium plated screwed down, high pressure with capstan heads, screwed both ends for iron pipe or for union fixed as in repair complete all as specified and directed.

15mm bore fancy type chromium plated long body Bib taps, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

15mm bore fancy type chromium plated pillar taps with capstan heads, screwed down high pressure with long screwed sharks and fly nuts screwed down for iron pipes etc and fixed complete all as specified and directed.

Double door cabinet without mirror 595x343x250mm fixed as in repair complete all as specified and directed. Make : Prayag, Cat Part No. 662 or equivalent.

Bathroom mirror (600 x600mm) fixed as in repair complete all as specified and directed. Make : Prayag, Cat Part No. 553 or equivalent.

Bathroom mirror (900 x 600mm x 6mm) with frame fixed as in repair complete all as specified and directed. Make : Prayag, Cat Part No. BLM-03F or equivalent.

Center hole wash basin mixer 15mm bore fixed as in repair complete all as specified and directed. Make : Prayag, Cat Part No. 6350 or equivalent.

Wall mixture premium quality alongwith over head shower and hand shower mixer 15mm bore fixed as in repair complete all as specified and directed. Make : Prayag, Cat Part No. 6380 or equivalent.

Single flow hand, ABS shower with 1.5 mtr SS flexible tube & hook fixed as in repair complete all as specified and directed. Make : Prayag, Cat Part No. BH-73 or equivalent.

Overhead 88mm ABS shower premium quality square with 225mm SS arm & flange fixed as in repair complete all as specified and directed. Make : Prayag, Cat Part No. BS-68 or equivalent.

Peg set 6 (Zinc) fixed as in repair complete all as specified and directed. Make : Prayag, Cat Part No. BEA-30 or equivalent.

Flushing cistern PVC capacity 10 Litres valve less syphonic action type, low level, white coloured, with inlet, ball valve, float and handle including brackets complete with flush pipe fixed as in repair complete all as specified and directed.

Ball valves, high pressure of PTMT (Polytetra methylene terephthalate) with epoxy coated aluminum rod & high density plastic ball and fly nut, screwed for iron pipe 20mm dia (minimum weight 210 gms) fixed as in repair complete all as specified and as directed.

PVC connection suitable for 15mm bore with PTMT nuts of 450mm length and including taking down old unserviceable complete all as specified and directed.

Tubular towel rail, brass chromium plated, 20mm dia, ‘D’ type, 60cm long between flanges fixed as in repair complete all as specified and directed.

Vitreous china wash hand basin white flat back of size 550x400mm including cutting for and pinning in ends of or erecting stand including waste fitting, brass chromium plated 32mm size with long with including dismantling and taking down old unserviceable complete all as specified and directed.

Vitreous china wash hand basin ivory colour of size 520mmx310mmx170mm fixed in grante plateform including dismantling and taking down old unserviceable complete all as specified and directed. Make : Prayag, Cat Part No. 4719 or equivalent.

Brass chromium plated bottle traps 300mm for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed as in repair complete all as specified and directed.

Twin flush concealed cistern without top push knob (suitable) for all wall hung WCs, fixed as in repair complete all as specified and directed. Make : Prayag, Cat Part No. 4043 or equivalent.

Actuator knob square type gloss finished fixed as in repair complete all as specified and directed. Make : Prayag, Cat Part No. 4044 or equivalent.

Colour wall hung closet, soft close seat cover of size 570x385x360mm fixed as in repair complete all as specified and directed. Make : Prayag, Cat Part No. 4520 or equivalent.

Stainless steel Jet Spary with braided tube 1.50mtr fixed as in repair complete all as specified and directed.

Hand Jet health faucet 15mm bore 1.5mtr stainless steel tube with all connected fittings, fixed as in repair complete all as specified and directed.

Vitreous china squatting pan 'Orissa Pattern' of size 580x440mm white with integral foot rest (excluding flushing cistern and flush pipe) with P' or 'S' trap complete including jointing and making good to floor provision of PCC 1:5:10 bed as in repairs and including dismantling and taking down old unserviceable complete all as specified and directed.

Vitreous china urinal, half stall type, white coloured, including providing & fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs and including 60mm long brass screws, pointing around urinal back in cement, with and including grating and union for discharge pipe, including 40mm size brass chromium plated waste coupling with long screwed shanks and flynuts, flange end bedded in red lead cement and other end fixed as repair complete all as specified.

32mm bore of pipe Low Density Polythylene Pipes (LDPE) with fittings as required of pressure rating 6 kgf/cm2 and fixed complete to walls, ceilings or in floors etc. complete all as specified and directed.

40mm bore of pipe Low Density Polythylene Pipes (LDPE) with fittings as required of pressure rating 6 kgf/cm2 and fixed complete to walls, ceilings or in floors etc. complete all as specified and directed.

Urinal spreader of PTMT for fixing with 15mm dia pipe (minimum weight 60gms) fixed as in repair complete all as specified and directed.

Coloured glazed ceramic tiles 450mm x 350mm x 7mm thick on vertical surfaces such as dado, skirting etc., set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over & including 10mm thick screed bed in cement and sand mortar (1:4) complete all as specified and directed.

Coloured Non Skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm in floors etc over 15mm thick in cement and mortar (1:6) bedding set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed

1000 Litre capacity Rotational moulded polyethylene water storage tanks triple layered (cylindrical vertical with closed top) ISI marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc fixed including taking down existing water storage tank complete all as specified and directed.

10mm thick plaster in cement and sand mortar (1:6) on fair faces of stone masonry or concrete surfaces of wall, finished even and smooth without using extra cement and including taking down cement plaster complete all as specified and directed.

10mm thick external plaster in cement and sand mortar (1:4) on concrete surfaces or masonry surfaces of ceiling, finished even and smooth without using extra cement including taking down old cement plaster, complete all as specified and directed.

12mm thick plaster in cement and sand mortar (1:4) on stone masonry or other than fair faces of concrete surfaces of wall, finished even and smooth without using extra cement including taking down old cement plaster, complete all as specified and directed.

Preparation of newly plastered surfaces of walls with smooth finished wall care putty and applying two coat of oil emulsion distemper of any tint etc complete all as specified and directed.

Preparation newly plastered surfaces of ceiling and applying two coats of oil emulsion distemper and with smooth finished wall care putty complete all as specified and directed.

Complete removal of existing treatment of plastered surfaces of walls and preparation with smooth finished wall care putty and applying two coats of oil emulsion distemper of any tint as approved complete all as specified and directed.

Complete removal of existing treatment of plastered surfaces of ceiling and preparation with smooth finished wall care putty and applying two coats of oil emulsion distemper of any tint as approved complete all as specified and directed.

Preparation of old treated/ decorated external wall/roof surfaces and applying one coat of exterior emulsion paint (weather coat) 1st quality in different tints/shades in sigma/ camouflaging pattern as approved complete all as specified and directed.

Preparation of newly plastered surfaces on wall/roof with smooth finished wall care putty and applying two coats of exterior emulsion paint (weather coat) in sigma pattern/ camouflage pattern at any height of the building/structure complete all as specified and directed.

Complete removal of existing treatment with smooth finished wall care putty and applying two coats of exterior emulsion paint (weather coat) in sigma pattern/ camouflage pattern at any height of the building/structure complete all as specified and directed.

Preparation old plastered surfaces of walls and applying one coat of oil emulsion distemper different tints in sigma pattern/ camouflage pattern complete all as specified and directed.

Preparation old plastered surfaces of ceiling and applying one coat of oil emulsion distemper different tints in sigma pattern/ camouflage pattern complete all as specified and directed.

4mm thick figured glass pin head type and glazing with oil putty or aluminium beads and rubber in squares not exceeding 0.50m sqm in each pane fixed new panes including hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones, complete all as specified and directed.

Easing and adjusting of steel window/ventilators including removing rusted and forging materials and replacing broken hinges including welding and all labour complete all as specified and directed.

Easing and adjusting of aluminium window including necessary joining cleats, glazing clips, rubber packing and anodised aluminium snap beading, screws, anodised aluminium fittings fixing aluminium bedding, rubber beding removing rusted and forging materials and replacing broken hinges including fixing necessary aluminium flat and aluminium angle complete all as specified and directed.

Excavation in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation etc. or for laying of cables, pipes, erection of poles, structs/stays etc. or for shafts, wells, cesspits, manholes, pier holes, etc not exceeding 10 sqm on plan and getting out soft/loose soil complete all as specified and directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick in soft/loose soil complete all as specified.

Removal of excavated soil/ material to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.50 metre above the starting point complete all as specified.

PCC (1:4:8) Type D-2 (using 40mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed.

Plain cement concrete (1:3:6) type C-1 (using 20mm graded stone aggregate) as in coping and like including weathering slightly rounded or chamfered angles and throating and necessary formwork as required and finishing the top surface of concrete even and smooth without using extra cement complete all as specified and directed.

20-30mm thick Pre polished Jaisalmer stone cladding (machine cut stone of size not exceeding 0.25 sqm) fixed with 10mm dia, 100mm long HSV R2 anchor fasteners (Brand : HILTI or equivalent) over 15mm thick backing coat in cement and sand mortar 1:4 complete all as specified and directed.

Stone railing having one side carving of approved design and pattern (Jali pattern) suitable for flat surfaces containing 30-40cm wide, 10cm thich base stone fixed to levelled surface fixed in cement and sand mortar 1:4 after dismantling of existing railing of any description, size and demolition of existing surface for resting base stone and make good surface with neat cement, making suitable size holes in base stone to receive railing posts (post girth upto 40cm) at 0.90-1.20 centre to centre, post shall have cutting to inner sides to take stone railing of 7.50cm thick and required length and height (upto 0.80m) making all holes fixed with coloured cement, chemical to match the colour of railing, washing of complete prepared railing with mixture of water and acid followed by coloured cement polishing to match the natural texture of stone all as specified and directed. Note: (i) Measurement will be taken from top of base stone to bottom of newel cap and gross measurement with post will be taken for all carving areas for payment purpose. (ii) Rates are included base stone, newel post, stone railing with all suitable fixing arrangements in position as directed. (iii) Photo of required design enclosed as per Appx 'G' Sketch No 02 for ready references.

75mm thick Plain Cement Concrete 1:3:6 type C-2 (using 40mm graded stone aggregate) as floor and plinth protection, finishing surface even and smooth without using extra cement complete all as specified and directed.

75mm thick PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in sub base of flooring finishing cement concrete surface fair and even complete all as specified and directed.

Galvanized, corrugated mild steel sheet 0.60mm thick with two corrugation side lap, fixed with L-type or J-Type or cranked hook bolt and washers as in wall claddings etc. with grade of Zinc coating 275, complete all as specified & as directed.

Excavating in post holes (or similar holes) each not exceeding 0.50 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance not exceeding 50m and making good surface in soft/loose soil complete all as specified and directed.

PCC (1:2:4) Type B-1 (using 20mm graded stone aggregate) as in surfaces channels, drain and benching for manholes, finished even and smooth and foundations (Post holes) complete all as specified and directed.

Rolled mild steel work as in Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment including necessary welding etc. conforming to Gde E-250 (Fe 410) quality 'B' complete all as specified and as directed.

Steel work in tubular pipes stanchions, purlins including special shaped , including special shaped washer etc. complete using or including butt welded tuber cum forming to IS 1161-1979 grade st - 240 complete all as specified and as directed.

Prepariation of newly steel surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Wind ties for including securing bolts, including all necessary drilling, bolting or riveting, and similar work conforming to Gde E-310 (Fe-410) complete all as specified and directed.

Hardcore of guage not exceeding 63mm deposited spread and leveled in layers not exceeding 15cm thick water and rammed to a true surface complete all as specified and directed.

Coloured Johnson endura tiles size 300mmx300mmx12mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigments over 15mm thick screed bed in cement and sand mortar 1:6 complete all as specified and directed.

Steel ventilator with top hung shutter including hinges, steel peg stay, handle complete all as specified and directed.

Demolition of plain cement concrete (unreinforced) in ground floors and pavings not exceeding 15cm thickness (below or above ground level) complete all as specified and directed.

Dismantling of floor, hearth or wall tiling, stone partitions including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Reinforced concrete pipe, 150mm bore class NP2, laid and jointed complete with collars including demolition and breaking up drain pipes 150 mm dia (salt glazed ware AC or reinforcement concrete set in cement mortar complete all as specified and directed.

PCC 1:4:8 type D-2 using 40mm graded stone aggregate for 150mm bore drain pipes for bed concrete including forming cradles against the sides of pipe after they are laid and tested complete all as specified and as directed.

Cutting into existing manholes/Septic tank for connecting new drains making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B1 (using 20mm stone aggregates) smooth finished and reforming benching as required for 150mm bore pipe complete all as specified and directed.

Vitreous china wash down water closet pan (Pedestal pattern), white coloured, including connection to drain (or outgoing pipe) and to flushing pipe, anti-sypohonage pipe etc., with plastic water closet seat cover (white coloured) closed pattern with flat bottom and cover and mild steel chromium plated or aluminized hinging device fixed as in repair complete all as specified and directed.

Factory made solid panel PVC door shutter 30mm thick (style), consisting of frame made out of MS tubes for stiles and for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC profile ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement complete all as specified and directed.

Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube fixed in opening as per specification complete all as specified and directed.

Solid PVC wall panelling/ Lining consisting of 5mm thick prelaminated PVC sheet inclusive of solvent cement and fixing at site on PVC frame etc., complete all as per specifications and including taking down of wall panelling with frame and E/M fitting/Fixtures and refixing the same position complete all as specified and directed. Note:- Rates shall be inclusive of refixing of dismantling of E/M fittings and fixtures.

5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on to wall to make to make PVC frame as per specification complete all as specified and directed.

Anodized aluminium snap grid frame work for false ceiling as per manufacturer's instructions with hangers from RCC soffit/steel trusses with 6mm dia GI rod (upto 1200mm length) adjusting level fixed to roof slab by means of ceiling cleats made out of GI flat 40x3 mm size 60mm long and Gypsum board 12mm thick in ceiling fixed with screws as per manufacturers instructions etc complete including taking down/dismentling of false ceiling boards complete all as specified and directed.

250mm long aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed in repair complete all as specified and directed.

15mm thick plaster in cement and sand mortar (1:6) on stone masonry surfaces or surfaces other than fair faces of brick work or concrete surfaces surfaces of wall, complete all as specified and directed.

Machine pressed factory made rubber moulded precast concrete interlocking paver block any shape and size conforming to IS-15658-2006 of 60mm thickness, M-35 grade with grey cement with pigment including 25mm thick machanicaly compacted thickness of sand bedding below paver tiles laid to required level & slope complete all as specified and directed.

Factory made chequered cement concrete tiles, 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigment over and including 15mm thick screed bed in cement and sand mortar 1:6 complete all as specified and directed.

Point wiring for one light point controlled by one, one way switch with 1.50 Sqmm single core PVC insulated and unsheathed multistranded copper conductor Flame Retardant Low Smoke (FRLS) cable 1100 Volt grade including 1.50 Sqmm single core PVC insulated and unsheathed multistranded copper conductor Flame Retardant Low Smoke (FRLS) cable 1100 Volt grade as continuous earth wire in green colour to common earth and connected to earth dolly laid/drawn into and including non metalic rigid PVC conduit 20mm dia with accessories fixed to cutting chases in walls by cutter and making good the surface in cement and sand mortar 1:3 and to the original specification and PVC conduit on ceiling for steel structure/surfaces conduit with clamps, gutties etc for RCC ceiling with including cast iron/pressed steel/wooden terminal boxes (as per site requirement) including including providing new 3 mm thick plastic laminated sheet cover (Hylem) including taking down old unserviceable point wiring complete all as specified & directed.

All as per serial item No. 145.00 here-in-before but for one fan point controlled by one switch and regulator complete all as specified and directed.

All as per serial item No. 145.00 here-in-before but for one 3 Pin, 5/6 Amps, socket outlet controlled by one 5/6 Amps switch on same board complete all as specified and directed.

All as per serial item No. 145.00 here-in-before but for one 3 Pin, 5/6 Amps, socket outlet controlled by one 5/6 Amps switch on independent board complete all as specified and directed.

Point wiring for one 6 pin, 15/16 Amps socket outlet controlled by one 15/16 Amps switch on independent board with 1.50 Sqmm single core PVC insulated and unsheathed multistranded copper conductor Flame Retardant Low Smoke (FRLS) cable 1100 Volt grade including 1.50 Sqmm single core PVC insulated and unsheathed multistranded copper conductor Flame Retardant Low Smoke (FRLS) cable 1100 Volt grade as continuous earth wire in green colour to common earth and connected to earth dolly laid/drawn into and including non metalic rigid PVC conduit 20mm dia with accessories fixed to cutting chases in walls by cutter and making good the surface in cement and sand mortar 1:3 and to the original specification and PVC conduit on ceiling for steel structure/surfaces conduit with clamps, gutties etc for RCC ceiling with including cast iron/pressed steel/wooden terminal boxes (as per site requirement) including including providing new 3 mm thick plastic laminated sheet cover (Hylem) including taking down old unserviceable point wiring complete all as specified & directed.

Switch piano, flush type, Single Pole, one way, 6 Amp, 240 Volts (ISI Marked) fixed as in repair complete all as specified and directed.

Socket outlet, 2 in 1, 3 pin, 6 Amp, flush type, 240 Volts (ISI Marked) fixed as in repair complete all as specified and directed.

Switch piano, flush type, Single Pole, one way, 16 Amp, 240 Volts (ISI Marked) fixed as in repair complete all as specified and directed.

Socket outlet 2 in 1, 5 pin, 16 Amps, flush type, 240 Volts (ISI Marked) fixed as in repair complete all as specified and directed.

Modular switch 6 Amps, 250 Volt, AC, one way, one module (ISI Marked) fixed as in repair complete all as specified and directed.

Modular switch 16/20 Amps, 250 Volt, Single Pole, AC, one way with indicator one module (ISI Marked) fixed as in repair complete all as specified and directed.

Modular Socket shuttered, 6 Amps, 250 volts, 2/3 Pin combined, Single Pole, universal India two module (ISI Marked) fixed as in repair complete all as specified and directed.

Modular Socket shuttered, 6/16 Amps, 250 volts, 3 Pin combined, Single Pole, two module (ISI Marked) fixed as in repair complete all as specified and directed.

Modular Metal flush mounting box of 3 Module fixed as in repair complete all as specified and directed.

Modular Metal flush mounting box of 4 Module fixed as in repair complete all as specified and directed.

Modular Metal flush mounting box of 6 Module fixed as in repair complete all as specified and directed.

Modular Metal flush mounting box of 8 Module fixed as in repair complete all as specified and directed.

Modular Metal flush mounting box of 12/16 Module fixed as in repair complete all as specified and directed.

White colour plates with frame for modular switch of 3 module fixed as in repair complete all as specified and as directed.

White colour plates with frame for modular switch of 4 module fixed as in repair complete all as specified and as directed.

White colour plates with frame for modular switch of 6 module fixed as in repair complete all as specified and as directed.

White colour plates with frame for modular switch of 8 module fixed as in repair complete all as specified and as directed.

White colour plates with frame for modular switch of 2 x 6 module fixed as in repair complete all as specified and as directed.

Ceiling rose surface bakelite with two or three terminal PVC/Polycarbonate, isolated body (ISI Marked), 240 volts in repair complete all as specified and directed.

Stepped type electronic fan regulator, flush type and connecting up, 100 watt, 240 volt (ISI marked) complete all as specified and directed.

Single Pole and earth enclosure with a two pin and earth plug and MCB Protected Socket (Modular AC Box, Metal clad box) Two Module, with one Single Pole, 20 Amps, repturing capacity 10 kA including taking down old unserviceable complete all as specified and directed.

Decorative ultra slim round profile LED tube light fittings of capacity 9 watt LED 6000 K, basic all purpose surface and wall mounted LED batten with extruded polycarbonate housing & integrated electronic driver including taking down old unserviceble LED fittings complete all as specified and directed.

Decorative ultra slim square profile LED tube light fittings of capacity 20 watt LED 6500 K, basic all purpose surface and wall mounted LED batten with extruded polycarbonate housing & integrated electronic driver including taking down old unserviceble LED fittings complete all as specified and directed.

LED Panel 36 watt with 2ft x 2 ft slim panel 595X595mm with super bright recess mounting LED Slim ceiling light with white powder coated extruded aluminium housing and highly efficient light smoothing optics to deliver superior illumination including LED driver and fixing in recess ceiling suitable size of aluminium strip size as required for fixing of LED fitting complete with all accessories prewired fixed on ceiling and connecting up complete with 3 core flexible cable of size 23/0.0076 including taking down old unserviceable fittings complete all as specified and directed.

Sub main wiring with 4.00 sqmm, Single Core, PVC insulated unsheathed multistranded copper conductor Flame Retardant Low Smoke (FRLS) cable 1100 volts grade conforming to IS 694 including 4.00 Sqmm Single Core PVC insulated unsheathed multistranded copper conductor Flame Retardant Low Smoke (FRLS) cable 1100 Volt grade as continuous earth wire in green colour drawn through in existing surface/recessed steel/PVC/steel rigid conduit including taking down old unserviceable submain wiring complete all as specified. Note : Two run of 4.00 sqmm cable and one run of 4.00 sqmm cable as earth wire continuity conductor shall be measured & paid as one unit.

Sub main wiring with 6.00 sqmm, Single Core, PVC insulated unsheathed multistranded copper conductor Flame Retardant Low Smoke (FRLS) cable 1100 volts grade conforming to IS 694 including 6.00 Sqmm Single Core PVC insulated unsheathed multistranded copper conductor Flame Retardant Low Smoke (FRLS) cable 1100 Volt grade as continuous earth wire in green colour drawn through in existing surface/recessed steel/PVC/steel rigid conduit including taking down old unserviceable submain wiring complete all as specified. Note : Two run of 6.00 sqmm cable and one run of 6.00 sqmm cable as earth wire continuity conductor shall be measured & paid as one unit.

MCB, Single Pole, 6 to 32 Amps rating, with over load and short circuit protection 'C' curve and rupturing capacity 10 kA, 240 Volt grade, AC supply, 50 Hz and making connections using suitable size copper lugs/thimbles fixed as in repair complete, all as specified.

MCB, SPN, 40 to 63 Amps rating, with over load and short circuit protection 'C' curve and rupturing capacity 10 kA, 240 Volt grade, AC supply, 50 Hz and making connections using suitable size copper lugs/thimbles, fixed as in repair complete, all as specified & directed.

MCB, TPN, 40 to 100 Amps rating, with over load and short circuit protection 'B' curve and rupturing capacity 10 kA, 415 Volt grade, AC supply, 50 Hz and making connections using suitable size copper lugs/thimbles, fixed as in repair complete all as specified & directed.

Sheet metal enclosure powder coated single phase DB SPN 4 ways and neutral 240 Volts, AC supply, 50 Hz, with 200 Amps rated bus bar Double Door (IP-43 IK 09 with metal door) suitable for fixing of MCBs including fixing of lugs in main incomming and outgoing line and fixing of cable glands of suitable size including grouting flush in the wall by means of nuts, bolts, angle iron and making good disturbed surfaces including taking down old unserviceable DB complete all as specified and directed.

Sheet metal enclosure powder coated single phase DB SPN 8 ways and neutral 240 Volts, AC supply, 50 Hz, with 200 Amps rated bus bar Double Door (IP-43 IK 09 with metal door) suitable for fixing of MCBs including fixing of lugs in main incomming and outgoing line and fixing of cable glands of suitable size including grouting flush in the wall by means of nuts, bolts, angle iron and making good disturbed surfaces including taking down old unserviceable DB complete all as specified and directed.

Supply, installation, hi wall Split type, Air conditioning unit indoor/outdoor, electric driven single phase of capacity 1.5 TR (5 Star EER) complete with cordless remote control unit and with in built air ioniser and plasma filter for better indoor air quality and connecting up all as per manufacturer’s instructions complete all as specified & directed. Note:- Cost of cutting chases/cutting holes etc in walls/floors including making good in cement mortar 1:4 and other necessary arrangement for fixing indoor & outdoor unit & other minor extras shall be deemed included in quoted rate of this item.

Supply, installation, voltage stabilizer for automatic operation single phase naturally air cooled indoor type copper wound and designed for input variation between 140 volts to 280 volts with output voltage stabilized at 200-240 volts with accuracy of ± 2.5% of capacity 5 KVA with mounting bracket with time delay relay complete all as specified and directed.

Earthing complete with galvanished earth plate electrode 60cm x 60cm x 6mm thick burried directly in ground (earth pit not less than 2.25m deep below ground level) with top edge of plate not less than 1.5 deep below normal ground level and connected to galvanished iron earth lead strip 32mmx6mm upto 7.50 metre, by means of GI nuts, bolt, check nuts, washers, thimbles, etc as shown in electrical plate No. 5 SSR Part-I and connection to main switch board or panel and testing on completion including excavation and earth work in any type to soil, returning fitting in and removal of surface spoil to a distance not exceeding 50 metre, PCC chamber (1:3:6) type C-2, charcoal and salt mixed layer 15cm thick all around the earth plate electrode, MS funnel with wire mesh, GI pipe light grade 20mm bore for watering and 50mm bore GI pipe light grade for earth wire protection fixed with poles with two clamps, made from earth lead strip 32mm x 6mm, bolts, nuts and washers, 80mm thick pre cast RCC cover 1:2:4, type B-1, reinforced with hard drawn steel wire fabric wieghing not less than 4 Kg/Sqm in lieu of CI cover etc including taking down old earth complete all as specified and directed. Note : (i) The unit rate shall be deemed to included for Test point, 32mmx6mm GI strip from top of the earth plate upto 7.50m above ground level. In case, GI protection pipe required is less than 7.50m, no price adjustment shall be made. (ii) PCC pit shall be provided at least 500mm away from the earth pit and not just on the earth pit and extra cost of additional length of water pipes and fittings, junctions, elbow etc shall be deemed to be included in the unit rate quoted by the tenderer.

Exhaust Fan, steel body, 300mm sweep, heavy duty, ISI Marked with mounted in suitable opening arrangement with louvers shutters suitable for operation on 230 volts, single phase, 50 cycle per second, AC supply and connecting up including three core PVC insulated PVC sheathed copper conductor flexible cable 24/0.2 mm drawn in flexible PVC conduit from ceiling rose or connector to fan including marking of MES number and making holes into wall and fixed to wall by using 4 Nos, bolts, nuts and washers and grouted in wall in CM 1:3 complete all as specified and directed.

Supply, installation and testing electric water heater, storage type, steel body with copper inner tank and heating element upto 2 KW, capacity 25 litre BEE 5 star rated complete with all assessories such as 02 Nos hot water gun metal glove/safety valve 15mm bore, 02 Nos hot water PVC connection 450mm length and 01 Nos hot water tape of brass/gun metal 15mm bore etc omplete all as specified and directed.

De-assemble of high mast light of hight 11-16 metre including all accessories, control gear double drum winch with luminaire mounting arm, including properly loosen nuts/bolts washer and shifting of high mast light of hight 11-16 metre and fixing the same with minimum yield strength 350 N/Sqmm as per IS-2062/BS EN 10025, flange door stifener : as per IS-2062 foundation bolt : TS 600 N/Sqmm, finishing : hot dip Galvanized to BS EN ISO 1461, the tolerance in A/F dimension are -/+3mm, Foundation :- Construction of suitable shallow foundation with M-20 grade concrete for high mast considering the safe soil bearing capacity at site as 10 T/Sqm at 2m depth, 08 Nos hole including foundation bolts suit 24mm dia and 850mm long anchor bolts, washer, anchor plate and common template for 16 metre high mast system (Note : Foundation to be casted as per recommended foundation drawing of OEM) complete all as specified and directed.

Aesthetically designed, decorative LED Downlighters round 12 watt recess mounted by hollow space in spot light for ceiling including taking down old unserviceble complete all as specified and directed.

Decorative wall light, gold finish fixture with white glass diffuser suitable for 7.5 Watt LED filament lamp E27 base including taking down old unserviceble complete all as specified and directed.

Up-Down Indoor/Outdoor LED Black Body Water proof IP65 3000K Exterior Wall Step Light Fixture Water proof Lamp 10/12 Watt (Warm White) including taking down old unserviceble complete all as specified and directed.

Supply, laying, jointing and testing XLPE insulated armoured heavy duty LT under ground electric cable (ISI marked) with aluminium stranded conductor 1100 Volt grade cross sectional area 35 sqmm 3.5 core laid in trenches/ducts, through pipe, under floors or roads/along poles including taking down old unserviceable cable complete all as specified and directed.

Galvanized steel water tubing medium grade of 25mm bore with & including all fittings complete, laid in trenches, including taking up or down old unserviceable steel water tubing and connections of 25mm bore, complete all as specified and directed.

Galvanized steel water tubing medium grade of 20mm bore with & including all fittings complete, laid in trenches, including taking up or down old unserviceable steel water tubing and connections of 20mm bore, complete all as specified and directed.

Galvanized steel water tubing medium grade of 15mm bore with & including (ISI marked) all fittings and fixed to walls, ceiling or laid in floors, including taking up or down old unserviceable steel water tubing and connections of 15mm bore, complete all as specified and directed.

Gun metal globe or gate valve screwed both ends for GI pipe with iron wheel head, screwed down high pressure ISI marked for 25mm bore GI pipe line fixed as in repair complete all as specified and directed.

Gun metal globe or gate valve screwed both ends for GI pipe with iron wheel head, screwed down high pressure ISI marked for 20mm bore GI pipe line fixed as in repair complete all as specified and directed.

S K TRADER