A/R and M/O Himachal Sewa Sadan Sector-25(W) Chandigarh and Sarai Bhawan 24-D

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix)complete as per the direction of Engineer in Charge including carriage of materials , within all leads and lifts as per direction of Engineer-in-Charge.

Providing and laying APP-2MM (Alace Polypropylene Polymer) modified prefabricated five layer water proofing membrane, black finished reinforced with non-woven polyester 150-180 GM matt consisting of a coat of bitumen primer for bitumen membrane (@0.3- 0.40 in/sgm. by the same membrane manufacture of density at 25°C, 0.87-0.89 kg/Itr and viscosity 70-160 cps and Over the primer coat the layer of membrane shall be laid uning Butane Torch and sealing all joints etc. After that Applying I coats of Bitumen Aluminium paint @0.20-0.30 litre per Sqmr Complete Inchading Carriage of material and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under: Joint strength in longitudinal and transverse direction at 23°C as 650/450N/5cm. Tear strength in longinudinal and transverse direction as 300/250N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane as per direction of Engineer in Charge including carriage of all labour, equipment and material to various locations through all modes of transportation in all leads and lifts and all incidental charges.

Providing and laying in situ seven course water proofing treatment with APP (Atactic poly-propylene) modified Polymeric memberane over roof consisting of first coat of bitumen primer @ 0.40 litre per sqm, 2nd, 4th & 6th courses of bonding material @ 1.20 Kg/sqm, which shall consist of blown type bitumen of grade 85/25 conforming to IS : 702, 3rd and 5th layers of roofing membrane APP modified Polymeric membrane 1.5 mm thick of 2.25 Kg/sqm weight consisting of five layers prefabricated with centre core as 20 micron HMHDPE film sandwiched on both sides with polymeric mix and the polymeric mix is protected on both side with 20 micron HMHDPE film. 7th, the top most layer shall be finished with brick tiles of class designation 10 grouted with cement mortar 1:3 (1cement : 3 fine sand) mixed with 2% integral water proofing compound by weight of cement over a 12 mm layer of cement mortar 1:3 (1 cement : 3 fine sand) and finished neat (item of laying brick tiles shall be paid for separately). The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane as per direction of Engineer in Charge including carriage of all labour, equipment and material to various locations through all modes of transportation in all leads and lifts and all incidental charges.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand) : 8 graded stone aggregate 40 mm nominal size)complete as per the direction of Engineer in Charge including carriage of materials , within all leads and lifts as per direction of Engineer-in-Charge.

Providing and fixing 110 mm ( One hundred ten millimetre) and 90 mm (Ninty millimetre) PVC floor trap I.S.I marked of self cleaning design with PVC Pipe complete complete as per the direction of Engineer in Charge including carriage of all labour equipments and materials to various location through all modes of transportation , within all leads and lifts as per direction of Engineer-in-Charge.

Providing and fixing C.P. grating mosquito proof round of approved quality and colour 100 mm (One hundred milimetre) nominal dia. complete as per the direction of Engineer in Charge including carriage of all labour equipments and materials to various location through all modes of transportation , within all leads and lifts as per direction of Engineer-in-Charge.

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge.With cement mortar 1:4 (1 cement : 4 fine sand).

Providing and laying matt finished floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete 300x300x10mm.complete as per the direction of Engineer in Charge including carriage of all labour equipments and materials to various location through all modes of transportation , within all leads and lifts as per direction of Engineer-in-Charge.

Dismantling floor and wall tiled including stacking of serviceable material and disposal of unserviceable material within 50 metres lead complete as per the direction of Engineer in Charge including carriage of all labour equipments and materials to various location through all modes of transportation , within all leads and lifts as per direction of Engineer-in-Charge.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 600x300x8mm (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete complete as per the direction of Engineer in Charge including carriage of all labour equipments and materials to various location through all modes of transportation , within all leads and lifts as per direction of Engineer-in-Charge.

Providing and fixing ISI marked CNS-WHT-853S220PPSM WC with UF Soft close seat cover hinge fixing accessories and asscessories complete as as per the direction of Engineer in Charge including carriage of materials , within all leads and lifts as per direction of Engineer-in-Charge.

Providing and fixing White Viterous China Wash Basin (Jaguar) size 500x400 mm with apair of 15 mm CP brass pillar taps with CI brackets,15 mm CP brass pillar tap, 32 mm CP brass watse of standard pattern including painting of fittings and brackets cutting and making good the wall whereever required complete as per the direction of Engineer in Charge including carriage of materials , within all leads and lifts as per direction of Engineer-in-Charge.

Providing and fixing C.P. brass angle cock FLR-CHR5053N for geyser points of approved quality conforming to IS:893115 mm (Fifteen Millimeter) nominal bore including carriage of material with in all leads and lifts and other incidentals as per direction of Engineer-in-Charge.The rates includes octroi,royality ,Malkana toll tax goods and serivice tax ,building and other construction work, welfare cess, royality of any other tax, levy or cess in respect of input for or output by this contract shall be payable by the Contractor and Government shall not entertain any claim whatsoever in this respect of the same.

Providing and fixing ISI marked C.P. bib cock FLR-5047N including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge

Providing and fixing CP brass towel rail 600 mm x 20 mm size complete as per the direction of Engineer in Charge including carriage of materials , within all leads and lifts as per direction of Engineer-in-Charge

Providing and fixing Chromium plated brass soap dish with CP brass brackets fixed to wooden cleats with CP brass screws complete as per the direction of Engineer in Charge including carriage of materials , within all leads and lifts as per direction of Engineer-in-Charge

Brick work using common burnt clay building bricks in foundation and plinth in Cement mortar 1:6 (One Cement Six Sand) Second class bricks including carriage of materials through all modes of transportation with ain all leads and lift and as per HP,PWD specification of 1990 volume -1 and as per direcation of Engineer in charge

Providing and laying in position cement concrete of specified grade including the cost of centering and shuttering - All work up to plinth level :1:2:4 (1 cement : 2 coarse sand) : 4 graded stone aggregate 20 mm nominal size)as per the diraction of Engineer in Charge including carriage of materials , within all leads and lifts as per direction of Engineer-in-Charge .

15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix :1:3 (1 cement: 3 fine sand) as per the direction of Engineer in Charge including carriage of materials , within all leads and lifts as per direction of Engineer-in-Charge

Providinng and laying granite stone in flooring 20mm(average) thickness base on cement mortar 1:3(1 cement : 3 sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of granite stone i/c rubbing polishing complete as as per the direction of Engineer in Charge including carriage of materials , within all leads and lifts as per direction of Engineer-in-Charge.

Brick tile work for wall lining etc. upto 10 metre height, backing filled with a grout of average 12 mm thick cement mortar 1:3 (1 cement : 3 coarse sand) including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade : (To be secured to the backing and the sides by means of cramps and pins which shall be paid for separately) :Red sand stone 30 mm- exposed face fine dressed with rough backing.as per the direction of Engineer in Charge including carriage of materials , within all leads and lifts as per direction of Engineer-in-Charge.

Providing and fixing PVC connection for sink or wash basin including PVC waste fittings complete as per the direction of Engineer in Charge including carriage of all labour equipment and material to various location through all modes of transportation in all lead and lifts and all incidental charges .

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil as per direction of Engineer in Charge including carriage of all labour, equipment and material to various locations through all modes of transportation in all leads and lifts and all incidental charges.

Providing and laying 150mm dia (to level or slopes) and jointing with approved adhesive high pressure PVC spigot and socket waste and ventilating pipe 150 mm dia in trenches including carriage of material in all lead and lifts as per direction of the Engineer in Charge.

Providing and fixing 1620 (20 mm OD)(twenty millimetre) pipe internal fitting Polyethelene-AluminiumPolyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C,(eighty degree centigrade) including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 m(One point zero metre) spacing. This includes testing of joints complete as per direction of the Engineer-incharge. including carriage of material with in all leads and lifts and other incidentals as per direction of Engineer-in-Charge.The rates includes octroi,royality ,Malkana toll tax, goods and serivice tax ,building and other construction work, welfare cess, royality of any other tax, levy or cess in respect of input for or output by this contract shall be payable by the Contractor and Government shall not entertain any claim whatsoever in this respect of the same.

1620 (20 mm (Twenty millimeter) OD) pipe internal fitting

2025 (20mm (Twenty five millimetre) OD)

Providing and fixing compositte end seal compression as per is -15450-204 for cold water supply e.g . tees,elbows, reducers, couplers & connectors etc., with clamps .This includes testing of joints complete as per direction of the Engineer-incharge. including carriage of material with in all leads and lifts and other incidentals as per direction of Engineer-in-Charge

2025x1620 reducer

2025x1620x2025 tee

1620x1620 coupler

1620 equal tee

1620x15mm female tee

1620x15 mm female elblow

2025x2025 coupler

1620x15 mm male socket

1620x1620 equal elbow

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete (kitec) including carriage of material with in all leads and lifts and other incidentals as per direction of Engineer-in-Charge

Providing and fixing Polyethelene-Aluminium- Polyethelene PE-AL-PE Composite insulatead Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 metre spacing. This includes the costs of cutting chases and including testing of joints complete as per direction of the engineer in charge.

Providing and fixing C.P. concealed body including upper part 15 mm dia floreltine series (jaquar) of standard design and of approved make conforming to IS:8931. including carriage of material with in all leads and lifts and other incidentals as per direction of Engineer-in-Charge

Providing and fixing ISI marked high pressure PVC spigot and socket, waste and ventlating pipes including filling the joints with approved adhesive complete as per HP.PWD. specification 1990 volume-I, including carriage of material with in all leads and lifts and other incidentals as per direction of Engineer-in-Charge.The rates includes octroi,royality ,Malkana toll tax goods and serivice tax ,building and other construction work, welfare cess, royality of any other tax, levy or cess in respect of input for or output by this contract shall be payable by the Contractor and Government shall not entertain any claim whatsoever in this respect of the same.

Providing and fixing ISI marked high pressure PVC spigot and socket, waste and ventlating pipes including filling the joints with approved adhesive complete as per HP.PWD. specification 1990 volume-I, including carriage of material with in all leads and lifts and other incidentals as per direction of Engineer-in-Charge.The rates includes octroi,royality ,Malkana toll tax goods and serivice tax ,building and other construction work, welfare cess, royality of any other tax, levy or cess in respect of input for or output by this contract shall be payable by the Contractor and Government shall not entertain any claim whatsoever in this respect of the same.

Plain bends:- 75 mm (Seventy five millimetre) diameter

Plain bends:-110 mm (one hundred Ten millimetre) diameter

PVC plain Tee 75 mm (Seventy five millimetre) diameter

PVC plain Tee 110 mm (one hundred Ten millimetre) diameter

PVC offset 75 mm (Seventy five millimetre) diameter

PVC offset 110 mm (one hundred Ten millimetre) diameter

PVC plain “Y" junction 75 mm (Seventy five millimetre) diameter

PVC plain “Y" junction110 mm (one hundred Ten millimetre) diameter

Providing and fixing 110 mm ( One hundred ten millimetre) and 90 mm (Ninty millimetre) PVC floor trap I.S.I marked of self cleaning design with PVC Pipe complete complete as per the direction of Engineer in Charge including carriage of all labour equipment.

Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete :(125 mm)as per direction of Engineer in Charge including carriage of all labour, equipment and material to various locations through all modes of transportation in all leads and lifts and all incidental charges.

Providing and fixing bright finished brass hanging type floor door stopper with necessary screws etc complete including carriage of material in all lead and lifts as per direction of the Engineer in Charge.

Providing and fixing aluminium work of Hindalco/Jindal for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-incharge. (Glazing, paneling and dash fasteners to be paid for separately) :Powder coated aluminium (minimum thickness of powder coating 50 micron)

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5 mm thickness (weight not less than 12.50 kg/ sqm)including carriage of material with in all leads and lifts and other incidentals as per direction of Engineer-in-Charge.

Providing and fixing aluminium work for doors, windows, board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer- in-charge. Pre-laminated particle board with decorative lamination on both sides including carriage of material with in all leads and lifts and other incidentals as per direction of Engineer-in-Charge

Providing and fixing oxidised M.S. hasp and staple (safety type) conforming to IS : 363 with necessary screws etc. complete :complete as per the direction of Engineer in Charge including carriage of all labour equipment and material to various location through all modes of transportation in all lead and lifts and all incidental charges .

Providing and fixing 50 mm bright finished brass cup board or wardrobe knob of approved quality with necessary screws complete as per the direction of Engineer in Charge including carriage of all labour equipment and material to various location through all modes of transportation in all lead and lifts and all incidental charges .

Providning and fixing 600x450mm bevelled edge mirror superior glass (of approved quality)complete with 6mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete as per architectural drawings and directions of engineer- in-charge.

Supplying and fioxing FRC cover with frame for manhole including carriage of material within all lead and lifts as per direction on Engineer of charge.The rate include octori, royality, malkhana ,toll tax, Goods Service Tax, buildinga and other construction worker, welfare cess royality or any other tax leavy or cess in respect of input or output by this contract shall be payable by the contractor and Goverment shall not entertain any calim whatsover in this respect of the same.

455x610 mm rectangular FRC cover (heavy duty)

600x600 mm with frame (heavy duty

300x300 mm rectangular FRC cover (heavy duty)

Rubbing and polishing of Precast terrazo tiles/Flooring on all floors including carriage of materials , within all leads and lifts as per direction of Engineer-in-Charge.

Removing dry oil bound distemper, water proofing cement paint and like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. including carriage of materials , within all leads and lifts as per direction of Engineer-in-Charge.

Applying Birla white putty wall care putty over plaster surfaces after thoroughly brushing the surface fre mortar drops,dust,loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete. including carriage of materials , within all leads and lifts as per direction of Engineer-in-Charge.

Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade: One or more coats on old work complete as per the direction of Engineer in Charge including carriage of materials , within all leads and lifts as per direction of Engineer-in-Charge.

Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete : 150x10 mmincluding carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges and as per direction of Engineer in charge.

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges and as per direction of Engineer in charge.

Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. 250x10mm

Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete

Providing and Fixng Stainless steel wire guage mesh aperture 1.4 mm and 0.50 mm dia wire including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges and as per direction of Engineer in charge.

Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete.complete as per the direction of Engineer-in-Charge including carriaghe of all labour equipments and materials to various location through all modes of transporation in all leads lifts and all incidental charges.