REPAIRS/REPLACEMENT OF FLOORING, JOINERY, SANITARY FITTINGS AND MISC B/R REPAIRS TO CERTAIN MARRIED AND OTM ACCN AT SION,COTTON GREEN OF AF STATION MUMBAI UNDER GE AF THANE

Amount

Taking down aluminum anodized/powder coated windows/doors shutters of any description n exc 2 sqm each ,broken aluminium section, roller, wiremesh, window panes etc and refixing the same duely repaired in position, complete all as specified and as directed by Engineer-in-charge. Note : Damaged members of shutter,glass/wire gauge ,aluminium sections, roller, wiremesh, window panes ,builders and hardware fittings used for rectification shall be paid for supply only under relevent item of BOQ.

Supply only aluminium anodised frame for doors/windows, ventilators and aluminium section for windows ,complete all as specified and as directed by Engr-in-charge.

Supply only rollers for sliding windows ,complete all as specified and as directed by Engr-in-charge.

Supply only stainless steel wire cloth, 0.36mm nominal dia of wire and average width of sperture 1.40mm and fixed with stainless steel wire staples,complete all as specified and as directed by Engr-in-charge.

Supply only sheet glass 4.00mm thick, ordinary quality and glazing n.exc 0.50Sqm in each pane ,complete all as specified and as directed by Engr-in-charge.

Taking down chowkhats or frames with shutters (without taking off shutters from frame) n. exc 1.5 sqm each ,complete all as specified and as directed by Engr-in-charge.

Taking down chowkhats or frames with shutters (without taking off shutters from frame) . exc 1.5 sqm & n.exc 4 sqm each ,complete all as specified and as directed by Engr-in-charge.

Taking down shutters of any description exc. 1 Sqm but n exc 2.00 sqm each ,complete all as specified and as directed by Engr-in-charge.

S&F solid PVC solid door frames of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube suppling and fixing in opening ,complete all as specified and as directed by Engr-in-charge.

S&F solid PVC Panel Door shutter 30mm thick style consisting of Frame made out of M.S Tube for top & Bottom rails, MS Frame shall be covered with heat moulded, Plain colour PVC’C’ channel having a PVC Sheets strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheets for Top rail, lock rail bottom rail on either side and as gap insert for top rail and bottom rail, paneling of plain colour 5mm thick PVC sheet fitted in the MS Frame, welded/ sealed to stiles and rail with suitable PVC sheet beading and jointed together with solvent cement all as per manufacture instruction ,complete all as specified and as directed by Engr-in-charge.

S&F IInd class hard wood plain, solid, straight chowkhat and frame wrought framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints ,complete all as specified and as directed by Engr-in-charge.

M&L for plain fillets in 2nd class hardwood sectional area exc 13 sqcm & n exc 25 sqcm ,square,rectangular or triangular insection, clean sawn, secured with nails or brads,complete all as specified and as directed by Engr-in-charge.

M & L for, Preparing surfaces of wood and wood based materials, steel and iron work, new or old,of any description and girth,not otherwise described, and treated with tar or coal tar black paint, etc ,complete all as specified and as directed by Engr-in-charge.

M & L for, Preparing surfaces of wood and wood based materials, steel and iron work, new or old,of any description and girth,not otherwise described, and treating ends of posts,backs of chowkats, etc., area tarred exc 0.1 sq. m but n exc 0.5 sq. m each with tar or coal tar black paint, etc ,complete all as specified and as directed by Engr-in-charge.

S&F for 35mm thick IInd class HW rail and style plain framed panelled factory made shutter (Two panel) with lock rail and panel of 9mm BWP,commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS :1003 (Part-I) kiln and chemically pressure treated ,complete all as specified and as directed by Engr-in-charge..

S&F for 35mm thick IInd class hard wood glazed and skelton shutters divided into squares with plain chamfered or reounded miltred and related sash bars number to received glass gauze etc edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutters as specified in SSR Part-I section 8 clause 8.20(a) supplied and fitted to chawkhats ,complete all as specified and as directed by Engr-in-charge.

S&F 200mm, ordinary rat tail rod pattern springs including roller and roller plate (short type, fighter jet aeroplane shape type) ,complete all as specified and as directed by Engr-in-charge.

S&F 30 mm thick flush shutters, solid core construction, with Block board core and plywoood face panels, commercial type on both sides ,complete all as specified and as directed by Engr-in-charge.

S&F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 , complete all as specified and directed by Engr-in-Charge.

M&L for Cutting holes in brick walls exc half bricks but nexc one brick built in cement mortar or cement lime mortar for inserting holdfasts and making good dismantlled portion in cm (1:3) or cement concrete type B1 (1:2:4) , complete all as specified and directed by Engr-in-Charge.

S&F But hinges of mild steel 100 mm long , complete all as specified and directed by Engr-in-Charge.

S & F Aluminium anodised barrel tower bolts of extruded section 150 mm length , complete all as specified and directed by Engr-in-Charge.

S&F Aluminium anodized barrel tower bolt extruded section 200mm long , complete all as specified and directed by Engr-in-Charge.

S&F extruded aluminium alloy handles 100mm long, fabricated type, anodised , complete all as specified and directed by Engr-in-Charge.

S&F extruded aluminium alloy handles 150 mm long , fabricated type., anodised , complete all as specified and directed by Engr-in-Charge.

S&F aluminium anodised door sliding bolt aldrop 250 mm long ,complete all as specified and directed by Engr-in-Charge.

S & F for Floor door stopper of aluminium alloy body and tongue, anodised,with hard drawn steel spring, fixed in floor, Overall length of cover plate 140 mm,etc complete all as spd and directed ,complete all as specified and directed by Engr-in-Charge. .

M&L for preparation of new wood surfaces of any description over 10cm width of girth applying two coats of synthetic enamel paint over coat of pink primer etc complete all as specified and directed by Engr-in-Charge.

M&L ,in repair, plain fillets in 2nd class hardwood sectional area exc 3 sqcm & n exc 6 sqcm ,square,rectangular or triangular insection, clean sawn, secured with nails or brads,complete all as specified and as directed by Engr-in-charge.

S&F, in repair ,door sliding bolt aldrop 250mm long aluminum anodised ,complete all as specified and as directed by Engr-in-charge.

S&F in repair 140 mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring ,complete all as specified and as directed by Engr-in-charge.

S&F in repair extruded aluninum alloy handles, fabricated type anodized 150mm long ,complete all as specified and as directed by Engr-in-charge.

S & F in repair 200mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified ( short type, fighter jet aeroplane shape type) ,complete all as specified and as directed by Engr-in-charge.

S&F in repair 18 mm thick MDF board, interior grade, prelaminated both side with decorative choice lamination, approved shade fixed with screws to timber frame work ,complete all as specified and as directed by Engr-in-charge.

S&F magnetic catches brass body and striking plate with aproved quality ,complete all as specified and as directed by Engr-in-charge.

S&F in repair continuous (Piano) hinges, mild steel bright finish or electro galvanised width of flaps (when open) in 40mm ,complete all as specified and as directed by Engr-in-charge.

Resecuring or easing & adjusting without taking down shutters of any description n. exc 1 sqm each, complete all as specified and as directed by Engineer-in-charge

Resecuring or easing & adjusting without taking down shutters of any description exc 1 sqm but n. exc 2 sqm each ,complete all as specified and as directed by Engineer-in-charge.

M&L in repair powder coated aluminum anodized grill of 4.5 x 7.5 mm bar size and 100 mm mesh with aluminium channel fixing of aluminium frame with necessary bolt/screw, or RG 103 or equivalent ,complete all as specified and as directed by Engineer-in-charge

M&L in repair for 5 mm thick frosted sheet glass fixing with aluminum frame with necessary screw/bolt ,complete all as specified and as directed by Engineer-in-charge

Dismantling to Stone slabs and tiles of any description or thickness in floors, aprons windows cills and like etc laid, bedded and pointed in any mortar ,complete all as specified and as directed by Engineer-in-charge.

M&L Marble work 18 to 20 mm thick (table rubbed and polished) black marble type (Chitter black) as in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match over10mm thick screed bed in CM 1:4 as backing coat to receive dado finish with marble shade ,complete all as specified and as directed by Engineer-in-charge

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises all as specified and removing the debris outside MOD Land ,complete all as specified and as directed by Engineer-in-charge

M&L Non - skid Ceramic colour tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed or bedding layer in CM 1:4 for receiving floor finished,complete all as specified and directed by Engr-in-charge.

S&F coloured Glazed ceramic tiles in vertical surface 450X300X7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick in CM 1:4 as backing coat to receive skirting / dado or tile, complete all as specified and directed by Engr-in-charge.

Taking down 15mm bore steel tubing & connection including cleaning for re-fixing or removal to store , complete all as specified and directed by Engr-in-charge.

Taking down 20mm bore steel tubing and connection including cleaning for re-fixing or removal to store , complete all as specified and directed by Engr-in-charge.

S&F GI tubing for 15mm bore ,medium grade, concealed with all fittings fixed to walls and ceiling or laid in floors ,complete all as specified and directed by Engr-in-charge.

M&L cutting chases, pinning in making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps cills sun shades shelves, concealed water tubing or concealed conduit wiring etc and making good cutting exc 10 cm but n. exc 20 cm girth , complete all as specified and directed by Engr-in-charge.

S&F GI tubing for 20mm bore ,medium grade, concealed with all fittings fixed to walls and ceiling or laid in floors ,complete all as specified and directed by Engr-in-charge.

S&F,in repair, brass chromium plated shower rose 125mm size ,complete all as specified and directed by Engr-in-charge.

S&F in repair half turn bib tap 15mm bore chroumium plated cast copper alloy crutch or butter fly handle screwed down screwed for iron pipe ,complete all as specified and directed by Engr-in-charge.

S&F in repair half turn stop cock valve 15mm bore cast copper alloy screwed down high pressure with cruch or butter fly handle screwed both ends for iron pipe and fixed ,complete all as specified and directed by Engr-in-charge.

S&F,in repair, 32mm high density polyethylene pipes (HDPE) of pressure rating 6kgf/Sqcm fixed complete to walls ceiling or in floors etc fixed ,complete all as specified and directed by Engr-in-charge.

S&F ,in repair, PVC connection pipe of 15 mm bore 600mm long with brass connector in ,complete all as specified and directed by Engr-in-charge.

S&F ,in repairs, orrisa pattern viterious china ware white glazed WC 580x440mm with integral foot rest ,complete all as specified and directed by Engr-in-charge.

S&F,in repairs,Vitreous China wash down water closet pan(padstal pattern) white (squatting pan & trap including 'P' or 'S' trap connection to drain (or out going pipe and to flushing pipe anti shyfonic pipe etc completely ,complete all as specified and directed by Engr-in-charge.

S&F,in repairs, plastic water closet seat , black, closed pattern with flat bottom & cover and mild steel chromium plated or aluminised hinging device,complete all as specified and directed by Engr-in-charge.

S&F, in repair, low level flushing system plastic valveless syphonic action type white with inlet ball valve float chain and ball (of capacity 10 ltrs ISI marked including 32mm PVC flush pipe ,complete all as specified and directed by Engr-in-charge.

S&F, in repair,CP Towel rail 20 mm dia, D type 60 cm long ,complete all as specified and directed by Engr-in-charge.

S&F,in repair, wash basins, vitreous china (flat back or angle type) size 550x400mm incl cutting for and pinning in ends of brackets or erecting stand including brackets and 32 mm dia waste pipe ,complete all as specified and directed by Engr-in-charge.

S&F,in repair, half turn CP Pillar taps of 15 mm bore with capstan heads, screwed down high pressure with or without lettered Hot or Cold with long screwed shan ks and fly nuts screwed for iron pipe and fixed ,complete all as specified and directed by Engr-in-charge.

S&F in repair 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints , laid in trenches / floors or fixed to walls,complete all as specified and directed by Engr-in-charge.

Ditto as per item No 64.00 above but for 75 mm bore.

S&F ,in repair, 110 mm bore PVC (SWR) bends ,complete all as specified and directed by Engr-in-charge.

S&F,in repair, 75 mm bore PVC (SWR) bends ,complete all as specified and directed by Engr-in-charge. .

S&F,in repair , MS 25 mm dia Drapery curtain rods powder coated decorative type,complete all as specified and directed by Engr-in-charge.

S&F in repair MS fancy powder coated brackets for 25 mm dia drapery curtain rods ,complete all as specified and directed by Engr-in-charge.

S&F, in repair, Aluminium Door closer hydraulically regulated designation No 3 universal type, Aluminium (extruded section) suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg ,complete all as specified and directed by Engr-in-charge.

S&F, in repairs, brass mortice lock 4 levers, vertical type size 100 mm ,complete all as specified and directed by Engr-in-charge.

S & F Glazed and skeleton shutters in 2nd class hardwood , thickness of shutter is 25 mm,open rebated and prepared to receive glass,gauze, etc. (with sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass,etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chawkats,etc ,complete all as specified and directed by Engr-in-charge.

S&F,in repair, stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of apreture 1.4 mm & fixed with stainless steel wire staples ,complete all as specified and directed by Engr-in-charge.

M&L for Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads exc 1.5 sqm ,complete all as specified and directed by Engr-in-charge.

S&F sheet glass ordinary quality 3.00mm thick and glazing with oil putty in squares n.exc 0.5 sqm in each pane ,complete all as specified and directed by Engr-in-charge.

S&F 3mm thick figured glass, pin-headed type and glazing with oil putty in squares n.exc 0.5 sqm in each pane ,complete all as specified and directed by Engr-in-charge.

Dismantling AC/GI sheets as in roof covering is any position complete all as ,complete all as specified and directed by Engr-in-charge.(Note : Old serviceable AC sheet retrived from this item shall be used against relevent item of Sch A)

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, including necessary scaffolding for fixing and fixed with self tapping screws ,complete all as specified and directed by Engr-in-charge.

S&F pre-painted Galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof ridge covering,including necessary scaffolding and fixed with self tapping screws ,complete all as specified and directed by Engr-in-charge.

S&F 6 mm thick asbestos cement, corrugated or semi- corrugated sheets in roofs.fixed with L- type or J- type or cranked hook bolts and using necessary scaffolding ,complete all as specified and directed by Engr-in-charge.

Refixing Old serviceable asbestos cement, corrugated or semi- corrugated sheets in roofs.fixed with L- type or J- type or cranked hook bolts and using necessary scaffolding ,complete all as specified and directed by Engr-in-charge.

Dismantling timber scantling 40 sq cm and over in section in any position unframed work ,complete all as specified and directed by Engr-in-charge.

S&F Second class HW as in scantiling timber framed and fixed in any position ,complete all as specified and directed by Engr-in-charge.

Dismantling unframed work in fillets , rails posts,rafters, purlins etc. under 40 sq. cm in section ,complete all as specified and directed by Engr-in-charge.

M&L hand rails, half round or other steel section or core for wooden hand rail straight portion drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc, wind ties for roof including securing bolts, posts and struts in fencing including futting tops to shape as directed drilling holes notching for wire etc flat iron fillets including all necessary drilling bolting or riveting etc and similar work conforming to Fe 290 Gde E 165 ,complete all as specified and directed by Engr-in-charge.

M & L for preparation of old steel surface of Eaves gutter and pipes any description,not otherwise described, over 10cm width or girth and applying two coat of synthetic enamal paint over red oxide primer , complete all as specified and as directed by Engr-in-charge.

S&F rolled sections with ERW or Induction butt weld M.S. tube black conforming to IS 1161-1979 grade Yst 240 as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates , complete all as specified and as directed by Engr-in-charge.

M&L preparation of new or previously untreated steel surfaces and applying two coat of synthetic enamel paint over red oxide primer on steel members , complete all as specified and as directed by Engr-in-charge.

Dismantling of wall and ceiling boards ( fibre ,pulp, insulation,etc,) or insulation boards/slabs/blankets any thickness,including cover fillets ,, complete all as specified and as directed by Engr-in-charge.

Dismantling wrought iron or mild steel work of any description not otherwise provided for, etc complete all as spd and directed.

S & F for Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre / intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including provision of Hanger 6 mm dia GI (upto 1200 mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3 mm size 60 mm long ,complete all as specified and as directed by Engr-in-charge.

M & L for Providing and fixing Gypsum Board 10mm thick in ceiling fixed with screw as per manufacturers instructions etc , complete all as specified and as directed by Engr-in-charge.

M & L for preparation of new Gypsum board surfaces on ceiling and filled the joint gaps with wall care putty and applying two coats of oil bound distemper over a coat of primer, complete all as specified and as directed by Engr-in-charge.

S&F Non asbestos fibre cement building boards 6 mm thick fixed or laid/inserted to timber/GI/Aluminium/Steel frame work with screws or like in ceiling , complete all as specified and as directed by Engr-in-charge.

M&L for preparation of new surfaces of non asbestos fibre building board and applying two coats of oil bond distemper over a coat of alkali-resistant priming paint on plastered surface,complete all as specified and as directed by Engr-in-charge.

M&L for preparation of old surfaces on ceiling and apply one coat of oil bound distemper,complete all as specified and as directed by Engr-in-charge.

Dismantling of cement concrete of any description and in any position not otherwise specifically provided for including old tarfelt etc , complete all as specified and as directed by Engr-in-charge.

M&L for PCC 1:3:6 type C1 (using 20 mm graded stone aggregate) in roof padding , complete all as specified and as directed by Engr-in-charge.

M&L wire brushing and cleaning top surface of tiles lime terracing or cement concrete, including flashings and junction of parapets etc and surface painting with a layer of blown bitumen of any penetration applied hot @ 1.70 kg per sqm , complete all as specified and as directed by Engr-in-charge.

M&L for APP based polymeric membrane minimum weighing 3 kg/sqm and minimum 3 mm thick reinforced with polyster non wove fabric (wt not less than 150 gms/sqm) laid on primed surface by torch application includes two coat of aluminium paint , complete all as specified and as directed by Engr-in-charge.

M&L for 10 mm thick cement plaster in cement mortor 1:4 mixed with WPC on top of roof including raking out old surface , complete all as specified and as directed by Engr-in-charge. (Note: WPC shall be measured separately under relevent item of Sch A)

Supply only integral waterproofing compound etc ,complete all as specified and as directed by Engr-in-charge.

M&L for preparing surfaces of roof old painted surface or previosuly untreated surface and applying one coat of aluminium paint ,complete all as specified.

Taking down cement plaster of any description on brick walls etc including raking out joints, hacking for key, scrubbing down with water,complete all as specified and as directed by Engr-in-charge.

M&L for rendering 15mm thick plaster in CM 1:6 on stone or brick work including finished even and smooth without using extra cement , complete all as specified and as directed by Engr-in-charge.

M&L for preparation of new surface on wall and apply two coat of oil bound distemper over a coat of primer ,complete all as specified and as directed by Engr-in-charge.

M&L for two layers plaster on external surfaces of wall, first layer 10 mm thick in CM (1:6) on other than fair faces of brick or concrete surfaces. Second layer (setting coat/finishing coat) 5 mm thick in CM (1:4) with approved water proofing compound with sand texture finish ,complete all as specified and as directed by Engr-in-charge.

M&L for preparation of new plastered surfaces of wall, chajjas in any position and applying two coats of external weather coat emulsion paint of approved make and shade including a coat of weather coat primer all as per manufacturer's instr uction and directions including scaffolding ,complete all as specified and as directed by Engr-in-charge.

S&F plain aluminium sheeting alloy Grade 31000 H4 to bottom of wooden shutter ,complete all as specified and as directed by Engr-in-charge.

M&L for Cleaning the existing holes on AC sheets and fixed M seal, washer etc to stop the leakage to the entire satisfaction ,complete all as specified and as directed by Engr-in-charge.

M&L for Removing & Cleaning of existing Cover concrete carefully by low impact high frequency hammer without damaging the existing concrete including cleaning the surfaces by air jet etc ,complete all as specified and as directed by Engr-in-charge.

M&L for Providing and applying Alkaline rust remover to the existing reinforcement and cleaning the reinforcement clearly with the wire brush ,complete all as specified and as directed by Engr-in-charge.

M&L for Providing and applying the zinc chromatic primer on existing reinforcement with the brush in two coat ,complete all as specified and as directed by Engr-in-charge.

M&L for Providing and applying structural grade Polymer bond coat prior to application of any type of mortar to ensure bond between old concrete & new concrete by brush application etc. ,complete all as specified and as directed by Engr-in-charge.

M&L for repairing spalled concrete by self compacting, early compresive strength (3 days 30 Mpa & 7 Days 50 Mpa minimuim) concrete upto 50mm thick by pouring in suitable form work using funnel or hose pipe with water/powder mix as per manufacturing instructions ,complete all as specified and as directed by Engr-in-charge.

M&L for repairing the damaged concrete portion by average 20mm thick polymer plaster @ a dose of 5% in ratio 1:3(CM) over the exposed non structural member surfaces including making the surface evenly smooth etc as per manufactureres instruction (meaurement on the basis of finished area) ,complete all as specified and as directed by Engr-in-charge.

M & L for preparing newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of alkali-resistant priming paint on wall care putty ,complete all as specified and as directed by Engr-in-charge. Note:- Wall care putty shall be measured and paid seperately.

M&L for 3mm thick wall care putty on wall ,,complete all as specified and as directed by Engr-in-charge.

Disconnecting existing water tanks, exc 1000 lit & n exc 2000 lit capacity, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately),etc ,complete all as specified and as directed by Engr-in-charge.

Disconnecting existing water tanks,exc 250 lit & n exc 500 lit capacity , setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately),etc,complete all as specified and as directed by Engr-in-charge.

S&F,in repair, GI tubing 25 mm bore, medium grade with all fitting fixed to wall and ceiling or in floor ,complete all as specified and as directed by Engr-in-charge.

S & F in repair Gun-metal, globe or gate valves, for 20 mm bore dia of pipe , with iron wheel head, screwed both ends for iron pipe and fixed etc.,complete all as specified and as directed by Engr-in-charge.

Ditto as per Srl Item No 122.00 above but for 25 mm bore dia of pipe

S&F Rotational moulded polyethylene water storage tanks, triple layered (cylindrical vertical with closed top ) of 500 lit capacity, hoisted and fixed in position ,complete all as specified and as directed by Engr-in-charge.

S&F Rotational moulded polyethylene water storage tanks, triple layered (cylindrical vertical with closed top ) of 2000 lit capacity hoisted and fixed in position,complete all as specified and as directed by Engr-in-charge.

S&F,in repair,Ball valves for 20 mm bore dia of pipe ,high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 20 mm - 210 gms) etc,complete all as specified and as directed by Engr-in-charge.

S&F,in repair ,Ball valves for 25 mm bore dia of pipe high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 25mm-455gms) etc ,complete all as specified and as directed by Engr-in-charge.

Dismantling of brick work or stone masonary, built in cement mortor ,complete all as specified and as directed by Engr-in-charge.

M&L brick work with sub class 'B' bricks using old size straight or curved on plan exc 6 mtr mean radius built in CM 1:6 ,complete all as specified and as directed by Engr-in-charge.

Dismantling of Cement Concrete (reinforced) in any position not otherwise specifically provided ,complete all as specified and as directed by Engr-in-charge.

M & L for TMT bars for 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders , cut to length bend to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips ,quality confirming to TMT bars ,complete all as specified and directed by Engr-in-Charge.

M&L for RCC in cement concrete (1:2:4) nominal mix (Using 20 mm graded stone aggregate) as in chajjas ,complete all as specified and directed by Engr-in-Charge.

M& L for Form work to Chajja and similar items including edges and using scaffolding ,complete all as specified and directed by Engr-in-Charge.

M&L for rendering 5mm thick in cement plaster 1:3 on fair faces of brick or concrete surface,etc ,complete all as specified and directed by Engr-in-Charge.

M&L for Cleaning and removing all scale and dirt etc, from tanks capacity exc 500 ltr & n. exc 1000 ltr and from mounths of circulating pipes etc , complete all as specified and directed by Engr-in-charge.

M&L for Cleaning and removing all scale and dirt etc, from tanks capacity exc 1000 ltr & n. exc 2000 ltr and from mounths of circulating pipes etc , complete all as specified and directed by Engr-in-charge.

Dismantling of cast iron/AC/PVC pipes100/110mm dia, jointed in cement mortar and taking out of trenches if required ,complete all as specified and directed by Engr-in-charge.

S&F PVC (SWR) bends 110mm bore of any radius, complete all as specified and directed by Engr-in-charge.

M&L for Removing of vegetation / plantation on the wall of multiple storey building including necessary scaffolding and roots superfacial area n.exc 2 sqm each and making good of surface by applying chemical treatment with GLYPHOSATE 41% including removing /refixing of CI/GI pipe lines , complete all as specified and directed by Engr-in-charge. (Note : Brick work, plaster and CI/GI pipe lines shall be measured and paid separately)

S&F,in repair ,Mild Steel water tank cover of any make and as per BMC standard ,fixed with washer and bolt locking device etc (wt of cover not less than 2.4 kg per cover),complete all as specified and directed by Engr-in-charge.

M&L for writing letters or figures (Block,Roman, Italic or Indian) n exc. 30 cm high,(Note: Letters shall be painted with synthetic enamel paint, so that they stand out boldly and solidly without showing signs of brush marks, if necessary, they shall be repainted until the desired result is obtained) , complete all as specified and as directed by Engr-in-charge.

M&L for stops, commas, short line, dashes, hyphens ,brackets, etc (Note: Letters shall be painted with synthetic enamel paint, so that they stand out boldly and solidly without showing signs of brush marks, if necessary, they shall be repainted until the desired result is obtained) , complete all as specified and as directed by Engr-in-charge.

M&L for rendering 5mm thick in CM 1:3 on fair faces of concrete as in soffit ceiling of slab, chajjas finished even & smooth without using extra cement , complete all as specified and as directed by Engr-in-charge.

M&L for preparation of newly plastered surfaces of ceiling and applying two coat of Oil bound distemper over a coat of chalk whiting on ceiling ,complete all as specified and as directed by Engr-in-charge.

M&L for Post construction Anti termite treatment by chemical emulsion (Immidacloprid 30.5 SC) as approved by IS 6313( part 3) : 2013 , to Ground floor buildings adhering to following specifications: a) For internal area drill holes of 12-mm dia at 300 cms C/C along the inner junction of wall and floor in the entire premise. Water based chemical emulsion will be injected under pressure into these holes with dosage until refusal or maximum up to 1 Lit per hole. Minimum 400 ml chemical emulsion needs to be fill per hole. b) For external area drill holes of 12-mm dia at 300 cms C/C along the external junction of wall and floor in the entire premise. Water based chemical emulsion will be injected under pressure into these holes with dosage of 2.25 ltrs per rm. c) All drilled holes to be sealed with white cement and matched with surrounding wall finishes. d) Treatment to wooden fixtures: At point of contact of wood work by chemical emulsion ( in oil or kerosene based solution) @0.50 lit/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm center to centre and sealing the same to match existing finish. e) Treatment to termite tubes: Visible shelter mud tubes will be removed and the infested area treated with water based chemical emulsion. All the drilled holes will be sealed and made good using cement. f) Treatment to be done by specialist agency licensed by IPCA and approved by Eng in charge. Specialist agency need to give written warranty for 5 years with yearly inspection and contact details to be displayed on board for attendance of complaint. Note : plinth area of the building will be measured Specialist agency : PCI, Elite corporation, paragon pesticides or IPCA licensed approved by GE

M&L for Post construction Anti termite treatment by chemical emulsion ( Immidacloprid 30.5 SC))as approved by IS 6313( part 3) : 2013, to first floor ( if infested with termite) of buildings adhering to following specifications: a) For internal area drill holes of 12-mm dia at 300 cms C/C along the inner junction of wall and floor in the entire premise. Water based chemical emulsion will be injected under pressure into these holes with dosage until refusal or maximum up to 1 Lit per hole. Minimum 400 ml chemical emulsion needs to be fill per hole. b) All drilled holes to be sealed with white cement and matched with surrounding wall finishes. c) Treatment to wooden fixtures: At point of contact of wood work by chemical emulsion ( in oil or kerosene based solution) @0.50 lit/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm center to centre and sealing the same to match existing finish. d) Treatment to termite tubes: Visible shelter mud tubes will be removed and the infested area treated with water based chemical emulsion. All the drilled holes will be sealed and made good using cement. e) Treatment to be done by specialist agency licensed by IPCA and approved by Eng in charge. Specialist agency need to give written warranty for 5 years with yearly inspection and contact details to be displayed on board for attendance of complaint. Note : plinth area of the building will be measured Specialist agency : PCI, Elite corporation, paragon pesticides or IPCA licensed approved by GE

M& L for Post construction Anti termite treatment by chemical emulsion as approved by IS 6313( part 3) : 2013 ( Imidacloprid 30.5 SC) to Second floor and above of buildings ( if not found infested with termite) adhering to following specifications: a) For internal area drill holes of 12-mm dia at corner of rooms in the entire premise. Water based chemical emulsion will be injected under pressure into these holes with dosage until refusal or maximum up to 1 Lit per hole. Minimum 400 ml chemical emulsion needs to be fill per hole. b) All drilled holes to be sealed with white cement and matched with surrounding wall finishes. c) Treatment to wooden fixtures: At point of contact of wood work by chemical emulsion ( in oil or kerosene based solution) @0.50 lit/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm center to centre and sealing the same to match existing finish. d) Treatment to termite tubes: Visible shelter mud tubes will be removed and the infested area treated with water based chemical emulsion. All the drilled holes will be sealed and made good using cement. e) Treatment to be done by specialist agency licensed by IPCA and approved by Eng in charge. Specialist agency need to give written warranty for 5 years with yearly inspection and contact details to be displayed on board for attendance of complaint. Note : plinth area of the building will be measured Specialist agency : PCI, Elite corporation, paragon pesticides or IPCA licensed approved by GE

M&L of voids in masonry using chemical emulsion as approved by IS 6313(Part 3) 2013 ( chlorpyrifos 20 EC )one Ltr per hole at 300mm intervals including drilling holes at 45 degree and replugging them with cement mortar 1:2 (1 cement : 2 Coarse Sand) to match the existing Surface ,complete all as specified and as directed by Engr-in-charge.