PROVISION OF TOILET BLOCK FOR GUARD AT FLAG STAFF HOUSE AND CERTAIN REVENUE AND MINOR WORKS UNDER GE CHENNAI

Amount

BOQ UPLOADED ON 03 AUG 2022

Surface dressing not exceeding 15cm deep and getting out in soft/ loose soil complete all as specified and directed.

Surface excavation n. exc. 30cm deep and averaging 15cm deep and getting out in soft/ loose soil all as specified and directed.

Excavation in trenches in soft/ loose soil n. exc. 1.50m wide and n. exc. 1.50m deep for foundation, or for shafts, wells, cesspits, manholes, laying cable etc. n. exc. 10 sqm on plan and getting out complete all as specified and directed.

Excavation in post holes (or similar holes) in soft/ loose soil each hole n. exc. 0.5 cum, getting out, returning filling in and ramming earth or broken rubble mixed with earth around in layers n. exc. 25cm, watering and removing surplus soil to a distance n. exc. 50m and making good surfaces complete all as specified and directed.

Returning filling in including spreading, leveling, watering & well ramming in layers not exceeding 25cm thick in soft/ loose soil complete all as specified and directed.

Removing excavated soil not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.

Removing excavated soil exceeding 50m and not exceeding 100m depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.

M&L for sand filling under floors or in foundation all as specified and as directed.

M&L for broken stone or boulders hard core of gauge n. exc. 63mm, deposited, spread and levelled in layers n. exc. 15 cm thick, watered and rammed to a true surface complete all as specified and as directed.

M&L for providing PCC (1:2:4) type B-2 using 40mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed.

M&L for providing PCC (1:4:8) type D-2 using 40mm graded stone aggregate as in foundation filling, sub base of floors and mass concrete complete all as specified and directed.

M&L for providing RCC M-30 (Design Mix) using graded stone aggregate as in foundations including rafts, footings, foundation beams, plinth beams, bases for columns etc., basement slabs, under reamed piles and mass concrete complete all as specified and directed.

M&L for providing RCC M-30 (Design Mix) using graded stone aggregate as in columns, pillars, piers, posts and struts etc., complete all as specified and as directed.

M&L for reinforced cement concrete, M-30 (Design mix), using 20mm and below graded stone agg as in roof beams, cantilevers, bressummers, lintels over 1.5m span all as spd and directed.

M&L for reinforced cement concrete, M-30 (Design mix), using 20mm and below graded stone aggregate as in roof slabs supported on walls, beams and columns in floors, roofs, deck slabs and the like all as specified and directed.

M&L for providing RCC (1:1½:3) type A-1 using 20mm graded stone aggregate as in foundations including rafts, footings, foundation beams, plinth beams, bases for columns etc., basement slabs, under reamed piles and mass concrete complete all as specified and directed.

M&L for providing RCC (1:1½:3) type A-1 using 20mm graded stone aggregate as in columns, pillars, piers, posts and struts etc., complete all as specified and as directed.

M&L for reinforced cement concrete (1:1½:3) using 20mm graded stone aggregate as in roof beams, cantilevers, bressummers, lintels over 1.5m span all as specified and directed.

M&L for reinforced cement concrete (1:1½:3) using 20mm graded stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, deck slabs and the like all as specified and directed.

M&L for precast RCC (1:1½:3) type A-1 using 20mm graded aggregate as in lintels, lintel beams, piers, posts and struts complete all as specified and directed.

M&L for providing precast cement concrete louvers and jallies, 25mm thick (measured solid), including all mouldings but excluding frame in cement concrete (1:2:4) type B-O (using 12.5 graded stone aggregate) set in cement mortar (1:4) complete all as specified and directed.

M&L for precast RCC (1:1½:3) type A-1 using 20mm graded aggregate as in manhole covers, landings, chullah hoods, chajjas with plain faces set in cement mortar (1:4) complete all as specified and directed.

Supply only liquid water proofing compound all as specified and directed.

M&L for brickwork with old size fly ash bricks straight or curved on plan exc. 6m mean radius built in cement mortar (1:6) complete all as specified and directed.

M&L for brickwork with old size fly ash bricks straight or curved on plan to any radius in half brick thick walls in cement mortar (1:4) complete all as specified and directed.

M&L for 40mm thick damp proof course in cement concrete (1:2:4), type B0 using 12.5mm graded stone aggregate mixed with and including water proofing compound as per manufacturers' instructions to horizontal or vertical surfaces including necessary formwork all as specified and as directed.

Cutting holes in into or through brick wall of superficial area exc. 150sqcm but n. exc. 400sqcm built in cement mortar or cement lime mortar and making good dismantled portion in cement mortar (1:3) or cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate complete all as specified and directed.

M&L for 18 - 20mm thick machine cut granite tiles (of any type), laid over and incl 15mm thick backing coat in cement mortar (1:6), bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigments to match with the shades of granite stone as in skirting/ dado including cutting and polishing etc., complete all as specified and directed.

Use and waste of formwork to foundations, fillings, bases of columns, rafts & raft beams, sides & siffits of foundation & plinth beams and similar works; vertical or batter for rough finished surface of concrete complete all as specified and as directed.

Use and waste of fw to sides of pillars, posts, struts, piers, cols and stanchions, rough finished surface of concrete square, rectangular or polygonal complete all as spd and as directed.

Use and waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, including supports, overhangs, etc. also splays between floors and beams complete of flat for rough finished surfaces of concrete all as specified and directed.

Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick of flat for rough finished surfaces of concrete all as specified and directed.

Use and waste of formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n. exc. 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc. 10cm but n. exc. 20cm wide flat for rough finished surfaces of concrete all as specified and directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm thick plain colour PVC sheet reinforced with MS square tube all as per relevant details given in SSR against item No. 08095 of SSR Part-II and fitted to chowkats complete all as specified and as directed.

S&F factory made wood free EPS solid PVC moulded door shutter 28 to 30 mm thick (stiles) with 2, 4 or 6 raised panel design with 2mm thick moulded PVC sheet Polyurethane painted on the front face and 2mm moulded prelam PVC sheet on back face fixed to frame complete all as specified, directed and shown in sketch relevant to item No. 8103 in SSR (Part-II).

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; galvanized of plain colour PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification and shown in sketch for item No. 8080 in SSR Part-II complete.

S&F mild steel butt hinges, medium weight cold rolled 100mm size all as specified and directed.

S&F extruded aluminium alloy handles cast type galvanized 150mm size all as specified and directed.

S&F aluminium galvanized barrel tower bolts of extruded section 200mm long all as specified and directed.

S&F aluminium alloy galvanized sliding door bolts 250mm long with hasp, staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded sections complete all as specified and directed.

S&F aluminium alloy wire mesh 0.45mm nominal dia of wire and average width of aperture 1.4mm fixed to wooden/ steel frames with aluminium wire staples complete all as specified and directed.

M&L for 10mm dia and over mild steel TMT bars as in reinforcement cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to Fe-500D complete all as specified and directed.

M&L for 8mm dia mild steel TMT bars as in reinforcement cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to Fe-500D complete all as specified and directed.

M&L for mild steel TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders cut to length, bent to shape required and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to Fe-500D complete all as specified and directed.

M&L for mild steel work in bands, straps, supports of stays, sunshade brackets, hook and pintle hinges, clamps, hold fasts, guard bars, grills bolts etc. and similar conforming to FE-290, Gde E 165 complete all as specified and directed.

BLANK

BLANK

BLANK

M&L for mild steel work in stairs (framed) including stringers, treads, landings, balusters, hand rails etc. including cleats, brackets etc. conforming to FE-410-W (Gde-E-250) quality-B complete all as specified and directed.

M&L plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment of Gde Fe 410-W (Gde-E-250) quality-A complete all as specified and directed.

S&F rolled mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., drilled for fixing of steel sheeting or other covering, doors etc. to be prepared for hanging or sliding with & including either hooks & hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails & guides) & hanging; also fastening & fixing Fe-410-W (Gde E-250) quality- A complete all as specified and directed.

S&F joists, channels, angles or tee sections, pipes etc. fixed independently without connecting plates etc. of grade Fe 410-W (Gde -E -250) quality 'A' as in posts, rafters, purlins etc. all as specified and directed.

S&F MS bolts and nuts, purpose made with hexagonal or square head one end and screwed the other, or screwed both ends each screwed end to be fitted with washers and one hexagonal or square nuts exc. 22.5cm & n. exc. 30cm long and n. exc. 12mm dia of bolts complete all as specified and directed.

S&F aluminium ventilators using aluminium section weighing not less than 0.62 kg per Rm for frame, louvers aluminium anodised snap beads, screws and fixed alongwith 5mm thick frosted/pin headed glass fixed with glazing clips, and one for wiremesh shutter fixed on frame etc., ( The rate is inclusive of all fittings of builders hardware such as wiremesh, hinges, bow handles, locking arrangements etc, complete all as specified and as directed by Engr-in-charge.

M&L Mild steel, plain, black sheet 1mm thick in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required.

S&F Plain, galvanised, mild steel sheeting 063mm in stepped flashings (measured as the minimum rectangle from which the pieces can be cut) complete all as specified and directed.

S&F powder coated aluminium (minimum thickness of powder coating 50 micron) frames for doors, windows and ventilator with one or more rebates including joining cleats for fixing complete all as specified and directed.

S&F aluminium anodized powder coated (minimum thickness of powder coating grade AC 15) deco grills of approved design/pattern with approved standard section and fixed to the existing window frame with CP brass/stainless steel screws @ 200mm c/c including cutting the grill to proper opening size for fixing and operation of handle and fixing accrued anodized aluminium standard section around the opening all as specified and as per requirement and direction of Engr-in-charge.

S&F powder coated anodised aluminium (minimum thickness of powder coating 50 micron) window and ventilator shutters, side hung without slash bar, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber packing, anodized aluminium snap beading, screws, anodized fittings such as peg stay 150mm long – (1No), hinge type B 21 100mm long (2 Nos) suitable handle – (1 No) complete all as specified and as directed.

S&F powder coated door shutter aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handle – 2 Nos, hinges anodized aluminium snap beading, screws etc, complete all as specified and directed.

S&F rolled mild steel roof trusses (framed), trussed purlins, crane gantries, rails & fastenings & heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats etc. Gde Fe 410-W (Gde-E-250) quality-A complete all as specified and directed.

M&L for steel tubular trusses including special shaped washers etc, complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240 including one shop coat of zinc chromate primer paint (including preparation of surfaces) at contractor's workshop before fabrication complete all as specified and directed.

S&F Pre-painted galvalume aluminium zink coating GI based corrugated steel sheet 0.5mm thick of any colour having tensile strength 550Mpa as in roof covering fixed with self tapping screws as per manufacturer’s instruction complete all as specified and directed.

S&F Pre-painted galvalume aluminium zink coating GI based plain steel sheet 0.5mm thick of any colour having tensile strength 550Mpa as in roof covering fixed with self tapping screws as per manufacturer’s instruction complete all as specified and directed.

M&L for 18/ 19mm thick pre-laminated particle board, exterior grade, pre-laminated one side with decorative choice lamination and other side balancing white lamination fixed to timber frame work with screws as in cupboard shutters/shelves etc. complete all as spd and directed.

M&L Non skid white ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tiles exc. 0.11 Sqm but n. exc. 0.18 Sqm as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed in cement mortar (1:4) complete all as specified and as directed.

M&L glazed coloured ceramic tiles of size 350mm x 250mm x 7mm/ 450mm x 350mm x 7mm thick laid on vertical surfaces set and jointed in neat cement slurry and pointed in coloured cement to match the tile laid over and including 10mm thick backing coat in cement mortar (1:3) complete all as specified and as directed.

M&L 75mm thick PCC (1:3:6) type C-1 using 20mm stone graded agg as in plinth protection/ path incl filling of joints by bitumen and sand in ratio (1:2) complete all as spd and directed.

M&L 100mm thick PCC (1:4:8) type D-2 using 40mm stone graded aggregate as in sub base of floors complete all as specified and directed.

M&L for chequered coloured (Designer) cement concrete tiles 40cm x 40cm x 25mm thick set, jointed and pointed in neat cement slurry as in floors with grey cement and no pigment laid over and including 20mm thick screed bed in cement mortar (1:4) including dismantling of existing tiles complete all as specified and directed.

M&L for 40mm thick PCC (1:2:4) type B-1 using 20 graded stone aggregate as in flooring finished even and smooth complete all as specified and directed.

S&F glass dividing strips 38mm wide, 3mm thick inserted in position conforming to design complete all as specified and directed.

Taking down cement plaster on brick work or stone walls etc including racking out of joint, hacking for key, scrubbing down with water etc. and removing the debris outside MD land complete all as specified and directed.

M&L for 15mm thick rendering in cement mortar (1:6) on fair faces of brick work or concrete surfaces finished the surfaces even and smooth without using extra cement complete all as specified and directed.

All as per Item No 74 above but in CM 1:4

M&L for 15mm thick rendering in cement mortar (1:4) on other than fair faces of brick work or concrete surfaces finished the surfaces even and smooth without using exta cement complete all as specified and directed.

M&L rendering 15mm thick in two coats i.e. 1st coat 10mm thick in cement mortar (1:6) and 5mm thick finishing coat in cement mortar (1:4) mixed with liquid water proofing compound and finishing the surface even and smooth without using extra cement complete all as specified and directed. Note: Supply only of liquid water proofing compound shall be measured and paid for separately.

M&L rendering 5mm thick in cement mortar (1:3) on ceiling finishing the surface even and smooth without using extra cement complete all as specified and directed.

BLANK

M&L 20mm thick rendering in cement mortar (1:4) mixed with water proofing compound applied on roof surface complete all as specified and directed.

M&L for applying three coats of white wash on walls including preparation of newly plastered surfaces complete all as specified and directed.

M&L for applying three coats of white wash on ceilings including preparation of newly plastered surfaces complete all as specified and directed.

M&L for applying two coats of dry distemper over a coat of primer on new surfaces complete all as specified and directed.

M&L for preparation of newly plastered surface of walls and applying two coats of weather proof paint (Apex Ultima of Asian Paints or equivalent from other specified makes) over and including a coat of alkali resistant primer complete all as specified and directed.

M&L preparation of newly plastered or previously untreated surface of walls and applying two coats of cement base paint, white or tinted complete all as specified and directed.

M&L for preparation of newly plastered surface of walls and applying two coats of oil bound distemper over a coat of alkali resistant primer complete all as specified and directed.

S&F sheet glass 4mm thick plain ordinary quality and glazing with oil putty as directed in squares n. exc. 0.50 Sqm in each pane complete all as specified and directed.

S&F Polished letters in stainless steel of size 20cm and n.exc 30cm including drilling, sealing the holes with metal paste and provision of new bolts over polished granite complete all as specified and as directed.

M&L preparation of new steel surfaces of any description not otherwise described over 10cm girth or width and applying two coat of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

S&F vitreous china wash basin white flat back size 630 x 450mm including cutting for and pinning in the ends of bracket or erecting stand excluding tap, waste chain, plug and porcelain stopper but including brackets and 32mm dia PVC waste coupling with waste pipe fixed in repairs complete all as specified and directed.

S&F vitreous china wash basin white flat back size 550 x 400mm including cutting for and pinning in the ends of bracket or erecting stand excluding tap, waste chain, plug and porcelain stopper but including brackets and 32mm dia PVC waste coupling with waste pipe fixed in repairs complete all as specified and directed.

S&F PTMT bottle trap having with internal partition 32mm size with 300mm end 190mm long wall connection pipes and wall flange complete all as specified and directed.

S&F vitreous china wash basin white flat back of size 580 x 450mm including waste coupling, waste pipe and brackets etc., complete all as specified and directed.

S&F vitreous china wash down water closet squatting pan Orissa pattern of size 580mm x 440mm with integral foot rest (white or light coloured) including making necessary connection to soil pipes and flushing cistern fixed in repairs complete all as specified and directed.

M&L vitreous china wash down water closet pedestal pattern white with including white coloured PVC seat cover including connections to drain (or outgoing pipe) and flush pipe etc. complete all as specified and directed.

S&F PVC low level flushing cistern 10 litre with complete accessories such as PVC flush pipe, over flow pipe etc. complete all as specified and directed.

S&F in repairs vitreous china white bowl urinal flat back of size 430mm x 370mm x 340mm (min.) with grating & union for discharge pipe (excluding flushing cistern, flush pipe & waste pipe) complete all as specified and directed.

S&F health faucet (hand shower) with 1.0metre long PVC tube with wall hook, chromium plated as per Cat No. BEA-40 of Prayag or equivalent from other makes specified in particular specifications complete all as specified and directed.

S&F toilet paper holder with flap recessed type matt chromium plated as per Cat No. 1153S of Jaquar or equivalent from other makes specified in particular specifications complete all as specified and directed.

S&F soap dish, matt finished, chromium plated (MCH/ colour CP) all as specified and directed by Engr-in-charge..

S&F soap dish, matt finished chromium plated (MCH/ Colour CP) as per Cat No. 1131N of Jaquar or equivalent from other makes specified in particular specifications complete all as specified and directed.

S&F 15mm PVC connection 600mm long with PTMT nuts of superior quality all as specified and directed.

S&F 15mm PVC connection 450mm long with PTMT nuts of superior quality all as specified and directed.

S&F 15mm PVC connection 450mm long with brass nuts of superior quality all as specified and directed.

S&F PTMT bib tap standard any colour suitable for 15mm bore pipe high pressure screwed for iron pipe and fixed (minimum weight 90gms) complete all as specified and directed.

S&F two way bib cock with wall flange as per cat No. FLR-5041N of Jaquar or equivalent from other makes specified in particular specifications complete all as specified and directed.

S&F 15mm dia pillar tap, cast copper alloy with capstan heads, chromium plated, screwed down high pressure with long screwed shanks and fly nuts screwed for iron pipes as per Cat No. CON-021 of Jaquar complete all as specified and directed.

S&F 15mm dia bib tap brass chromium plated with fancy type screwed down, screwed for iron pipes or for brass ferrule as per Cat No. CON-037KN of Jaquar complete all as specified and directed.

S&F 15mm dia brass chromium plated angle cock with flange, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union as per Cat No. CON-053KN of Jaquar complete all as specified and directed.

S&F fancy type pillar tap cast copper alloy with capstan heads chromium plated screwed down, high pressure with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts screwed for 15mm bore iron pipe complete all as specified and directed.

S&F stop valve, cast copper alloy, chromium plated, fancy type with long shank & cup (concealed type), screwed down, high pressure with crutch or butterfly handle, screwed both ends for 15mm bore iron pipe or for union complete all as specified and directed.

S&F 15mm dia PTMT stop valves any colour high pressure screwed for iron pipe or for union (Minimum weight 90g) complete all as specified and directed.

S&F 15mm dia PTMT angle valves any colour high pressure screwed for iron pipe or for union (Minimum weight 90g) complete all as specified and directed.

S&F 600mm x 450mm galvanized beveled edged looking mirror 6mm thick with aluminium frame work fitted with 6mm thick commercial ply or AC sheet backing to mirror and fixed to wall with raw plugs and chromium plated brass screws and cup washers etc., complete all as specified and directed.

S&F sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with aluminium alloy brackets and guard rail 60cm long.

S&F 20mm dia tubular towel rail 'D' type 60cm long brass chromium plated complete all as specified and directed.

S&F 60cm long PTMT towel rail fixed with and including chromium plated brass screws and plastic cleats (minimum weight 190g) complete all as specified and directed.

S&F PTMT overhead round shower 100mm dia with shower arm 225mm long with flange suitable for fixing with 15mm dia pipe complete all as specified and directed. Make: Prayag Cat No. 1814 (Shower) with Cat No. 184 (Shower Arm) or equivalent from other makes specified in particular specifications.

S&F ABS shower rose of size 125mm including brass shower arm 225mm long with bend of 45° with flange fixing with 15mm dia pipe complete all as specified and directed. Make: Prayag Cat No. BS-76 or equivalent from other makes specified in particular specifications.

S&F galvanised steel water tubing 15mm bore medium grade including provision of all pipe fittings such as bends, tees, elbows, reducers, unions, plugs, sockets etc. fixed to walls, concealed in walls/ ceilings or laid in floors etc. complete all as specified and directed.

S&F galvanised steel water tubing 20mm bore medium grade including provision of all pipe fittings such as bends, tees, elbows, reducers, unions, plugs, sockets etc. fixed to walls, concealed in walls/ ceilings or laid in floors etc. complete all as specified and directed.

S&F galvanised steel water tubing 25mm bore medium grade including provision of all pipe fittings such as bends, tees, elbows, reducers, unions, plugs, sockets etc. fixed to walls, concealed in walls/ ceilings or laid in floors etc. complete all as specified and directed.

S&F 20mm bore gun metal, globe or gate valve confirming to IS 778-1984 with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed.

S&F 25mm bore gun metal, globe or gate valve confirming to IS 778-1984 with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed.

S&F 500 litre capacity three layered rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed.

S&F 1000 litre capacity three layered rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed.

S&F ball brass valve for 20mm bore pipe, high pressure with polyethylene high density float and fly nut complete, screwed for iron pipe complete all as specified and directed.

S&F ball valve PTMT with epoxy coated aluminium rod for 25mm bore pipe, weight not less than 210gms, high pressure with polyethylene high density float and complete screwed for iron pipe fixed in repairs complete all as specified and directed.

S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed.

S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints laid in floor/ trenches complete all as specified and directed.

S&F PVC (SWR) vent cowl 110mm bore all as specified and directed.

S&F PVC (SWR) bend 110mm dia any radius with access door all as specified and directed.

S&F 110mm bore PVC (SWR) junction double, double ‘T’ equal or unequal with access door complete all as specified and directed.

M&L for PVC (SWR) floor trap 110mm dia plain with grating including jointing with solvent cement complete all as specified and directed.

All as per Item No. 134 above but 75mm dia.

M&L for PCC (1:4:8) type C-2 using 40mm graded stone aggregate as in concrete bed to 200mm bore SGSW drain pipe including packing under and completely surrounding pipe with concrete after they are laid and tested complete all as specified and directed.

M&L for 200mm bore SGSW pipe laid in trenches and jointed complete complete all as specified and directed.

M&L intercepting trap 150mm dia internal dia of salt glazed stoneware, with square ends to inspection arms for building flush into manholes and setting in cement mortar (1:1) complete including concrete foundation of width and thickness as for pipes of same dia and haunching after setting. Cleaning arm to include a glazed ware stopper, galvanized iron bayonet joint (or other approved pattern) and galvanised iron lever (or trigger), galvanised iron chain, hook and ring complete all as specified and directed.

M&L cutting into existing manholes for connecting new drains upto 150mm dia pipe and making good to pipe & rendering, cutting out existing benching for & forming branch channel (1/2 round or 3/4 section) in cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate smooth finished, & reforming benching as required complete all as specified and as directed.

Demolition of brick masonry built in cement mortar including all quoins, arches, pillars, ashlars facings, dressed stone work and pre cast concrete articles etc., complete all as specified and as directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc. including removal of debris to outside MD land complete all as specified and directed.

Dismantling structural steel work of any description as in doors, gates etc. all as specified and directed.

M&L for point wiring complete with 1.5sqmm (nominal area) PVC insulated unsheathed multi-stranded, (two run for Phase and Neutral) copper conductor FR & LS grade cable of 1100V grade conforming to IS -694 drawn through and including new non-metallic rigid PVC conduit medium grade, ISI marked, 20mm bore with conduit accessories concealed In wall/ floor and fixed on ceiling/roof etc. including new pressed steel terminal boxes 1.6mm thick, concealed in walls with plastic laminated sheet cover 3mm thick as top cover fixed with cadmium plated screws for housing the switch sockets, outlets, fan regulator etc. including provn of 1.5sqmm PVC insulated unsheathed copper conductor cable of green colour for earth continuity and connecting to common earth dolly etc., complete all as specified and directed for:-

One light point controlled by one switch.

One Fan/ Exhaust fan point controlled by one switch.

One 3 pin 5 amps socket outlet on the same board with other switches controlled by one switch.

One 3 pin switch socket outlet, 5 Amps on independent board controlled by one switch.

M&L for point wiring complete with 2.5sqmm (nominal area) PVC insulated unsheathed multi-stranded, (two run for Phase and Neutral) copper conductor FR & LS grade cable of 1100 V grade conforming to IS -694 drawn through and including new non-metallic rigid PVC conduit medium grade, ISI marked, 20mm bore with conduit accessories concealed In wall/ floor and fixed on ceiling/ roof etc. including pressed steel terminal boxes 1.6mm thick, concealed in walls with plastic laminated sheet cover 3mm thick as top cover fixed with cadmium plated screws for housing the switch sockets, outlets, fan regulator etc. including provision of 2.5sqmm PVC insulated unsheathed copper conductor cable of green colour for earth continuity and connecting to common earth dolly for one socket outlet (plug point) three pin 15 Amps controlled by one switch 15 Amps on independent board complete all as specified and directed.

S&F switch piano, flush type, single pole, one way, 5 Amps, 230 volts all as specified and directed.

S&F socket outlet 2 in 1, 3 pin 5 Amps, 230 volts all as specified and directed.

S&F switch piano, flush type, single pole, one way, 15 Amps, 230 volts complete all as specified and directed.

S&F socket outlet 3 pin, 15 Amp, flush type, 230 volts all as specified and directed.

S&F ceiling rose PVC/ polycarbonate body 65 x 50mm 2 to 3 terminals 230 Volts, AC Single phase all as specified and directed.

Supply and fix lamp holder insulated body with back plate for batten fittings/ angle holder as required complete all as specified and directed.

S&F electronic ceiling fan regulator dimmer type, 450W, 250 volts all as specified and directed.

S&F electronic ceiling fan regulator, flush type, 300 watts all as specified and directed.

S&F high speed BEE 5 star rated standard plain ceiling fan of 1200mm sweep (colour as approved by GE) 230V, 50HZ single phase fixed with suitable clamp and down rod (GI Pipe) including drilling, bolts and nuts complete all as specified and directed.

S&F turbo force 4 blade (300mm sweep) exhaust fans AC single phase 230/ 240 volts, heavy duty corrosion resistant body rigid frame with rubber mountings for minimal noise operation & maintenance free design with pressure die cast aluminium rotor mounted on two ball bearings with maximum air with minimum power consumption conforming to IS: 2312-1967 complete all as specified and directed.

Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc.

Supply and fix 09 watts LED lamp complete all as specified and directed.

S&F basic all-purpose surface and wall mounted LED batten 20 watt light fitting with aluminium housing and integrated electronic driver including 20 watt LED tube fixed on wall or ceiling complete all as specified and directed. Make: CG Cat Part No. LDL-20-CDL or equivalent of other makes specified in particular specifications.

S&F environmental friendly, ultra modern, energy saving, surface mounted decorative oval bulkhead edge-lit LED luminaire comprising of high brightness complete all as specified and directed. Make: Philips Cat No. WT202W LED6S NW PSU S2 PC or equivalent from other specified makes.

S&F basic all-purpose surface and wall mounted LED batten 10 watt light fitting with aluminium housing and integrated electronic driver including 10 watt LED tube fixed on wall or ceiling complete all as specified and directed. Make: CG Cat Part No. LDL-10-CDL or equivalent of other makes specified in particular specifications.

S&F LED light fitting 20 watts basic all-purpose surface and wall mounted LED batten with aluminium housing and integrated electronic driver fixed on wall or ceiling surface complete all as specified and as directed. Make: Havells cat No. LUMILINEPLUSBS20WLED830SPCSS or equivalent from Crompton Greaves/ C&S/ HPL.

S&F LED bulb 9Watt high suitable for lamp holder complete all as specified and directed.

Supply, fix, connecting and testing factory made, MCB distribution board (MCB DB), IP 38, SPN, 8 way, 240 Volts, double door, flush type made out of 1.2mm thick CRCA sheet metal, Phosphatised, duly powder coated and conforming to IS 13032 with 200 Amps rated bus bar, neutral link, earth bar and din rail etc. complete fixed in switch board/ wall complete all as specified and directed. Note: MCBs shall be measured and paid separately.

Supply and fix MCB SPN 40 Amps AC 240 volts complete all as specified and directed.

Supply and fix MCB SP 40 Amps AC 240 volts, ‘B’ curve complete all as specified and directed.

Supply, fix, connecting and testing MCB single pole (MCB SP), 6 to 32 Amps, 240 volts of rupturing capacity 10kA, C curve type complete all as specified and directed.

S&F for junction box with single pole MCB c series and connection with cable including lugs with cramping tools complete and double clamped with fabricated and directed and fixed out side wall with bolts and nuts including painting complete all as specified and directed.

Supply, fix, connecting and testing isolator MCB SPN, 63 Amps, 415 volts complete all as specified and directed.

S&F in trenches/fixed on walls by suitable clamps and jointing the GI pipe light grade 40mm dia size complete all as specified and directed.

S&F test, commissioning LED Post top latern luminaries outdoor type 20 Watts new generation energy saving & environmental friendly long life versatile pressure die-cast aluminium IP 66 roadway luminaire with high power LEDs as light source and electric driver suitable for operation on AC single phase 220-240 volts, 50Hz supply, including proviusion of two single core 1.5 Sqmm copper conductor PVC insulated, 1100 volts, cable not less than 8 mtr long etc, connecting from junction boxes of poles and including taking down old fitting all as directed by Engr-in-charge. Make : Cat No. CG LPTH-20-CDK-M or equivalent to Havells, bajaj, Philips.

M&L for submain wiring complete with two runs of 4.0 Sqmm single core, multistranded, FR PVC insulated unsheathed cable 1100 volts grade with copper conductor, drawn through and including rigid non metallic PVC conduit medium grade ISI marked 25mm external dia fixed on wall/ floor/ ceiling along with conduit fittings and accessories, fixed on ceiling with one run of 4.0 Sqmm PVC insulated unsheathed copper conductor cable as earth continuity conductor and connecting to common earth dolly complete all as specified. Note: Two runs of 4.0sqmm multistranded cable and one run of 4.0sqmm cable as earth continuity conductor alongwith PVC conduit shall be considered as one unit length.

Supply, laying, connecting up and testing XLPE insulated armoured LT UG electric cable with aluminium conductor 1100 V grade of size 10 sqmm 2 core laid in trenches, fixed along wall or passing through pipes/ in floors complete all as specified and directed.

Supply, laying, connecting up and testing XLPE insulated armoured LT UG electric cable with aluminium conductor 1100 V grade of size 16 sqmm 2 core laid in trenches, fixed along wall or passing through pipes/ in floors complete all as specified and directed.

Supply, laying, connecting up and testing XLPE insulated armoured LT UG electric cable with aluminium conductor 1100 V grade of size 16 sqmm 4 core laid in trenches, fixed along wall or passing through pipes/ in floors complete all as specified and directed.

Supply, laying/ spreading in trenches clean dry sand to required width and depth at bottom and top of cable including spreading, levelling, punning for laying/ cushioning of cable all as specified and directed. Note: Punned thickness only will be considered or payment.

Supply and laying burnt bricks, old size, sub class 'B', laid flat abutting each other, perpendicular to cable with width equal to width of brick laid in trenches for protection of cable all as specified and directed.

Earthing complete with galvanized steel earth plate electrode of size 600mm x 600mm x 6.0mm thick burried directly in ground (earth pit not less than 2.25m deep below normal ground level) with top edge of plate not less than 1.5m below normal ground level, earth plate connected to galvanized iron earth strip of size 25mm x 4mm as earthing conductor by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No. 3 of MES SSR part I (2009) connected to earth test point/ main switch/ DB/ Panel board all as specified or indicated including testing on completion with and including 32mm bore light grade GI protection pipe for earth strip including PCC (1:3:6) type C1 pit with 40mm thick precast RCC (1:2:4) type B-1 cover reinforced with 8mm dia MS bars @ 100mm c/c both ways with lifting hooks made out of 12mm dia MS bars, wire mesh funnel with watering pipe 20mm dia light grade, common salt, charcoal filling in layers as specified, necessary excavation and earth work in any type of soil etc., testing on completion including dismantling existing earthing complete all as specified and as directed.

G.JANAKIRAMAN CO