Repair to fencing/compound wall and rolling shutters and other misc works at Tech area, AF Stn Tughlakabad

Amount

M&L for aluminium sections used as strip and other members in aluminium rolling shutter and other similar works for existing aluminium door powder coated of any colour (thickness or powder coating not less than 50 micron) as frames for doors, windows, curved rolling shutter strip including interlocking mechanism (1.4 mm thk double layer, width 50-80 mm), ventilators with one or more rebates including jointing cleats for fixing etc. complete all as specified and directed.

Demolition of brick work built in cement mortar complete all as specified and directed.

M&L for brick work work in cement mortar 1:6 exc. 6m mean radius using old size sub class'B' bricks complete all as specified and directed.

Taking down cement plaster including raking out joint hacking for key scrubbing down with water etc complete all as specified and directed.

M&L for 15mm thick rendering in cement mortar 1:4 to brick/concrete wall surfaces finished even & smooth without using extra cement complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces finished even & smooth without using extra cement complete all as specified and directed.

S&F Collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners , brass handles etc., as specified, erected in position and securing runners with hold fasts and brackets, complete all as specified and directed.

M&L for applying two coats of distemper oil emulsion over a coat of wall putty over one coat of white wash to newly plastered wall surfaces including preparation of surfaces complete all as specified and directed.

M&L for two coats of cement based paint over a coat of white wash on new surfaces of walls including preparation of surfaces complete all as specified and directed.

M&L for preparation of New or previously untreated steel & Iron surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer of any discription over 10 cm in width or girth, not otherwise described complete all as specified and directed.

M&L for plain cement concrete 1:5:10 type E2 by using 40mm graded crushed stone aggregate as in foundation filling and mass concrete complete all as specified and directed.

M&L for Reinforced cement concrete Type A-1 of 1:1 ½ :3 by using 20mm graded crushed stone aggregate in foundations, including rafts, footings, foundation bears, plinth beam, bases for column etc basement slab, under reamed piles and mass concrete all as specified.

M&L for Reinforced cement concrete Type A-1 of 1:1 1/2:3 by using 20mm graded crushed stone aggregate in columns, pillars, piars, post, and strut complete all as specified and directed.

M&L for Use and waste form work to sides of concrete foundations, footings, beams of columns, rafts, and raft beams, sides of soffits, (if any) of foundation and plinth beams and similar work vertical or to batter all as specified for rough finished surfaces of concrete flat complete all as specified and directed.

M&L for Use and waste form work to sides of pillars, posts, struts, piers columns and stanchions for rough finished surfaces of concrete flat complete all as specified and directed.

M&L for deformed or twisted TMT bars of 10 mm dia and over cut to length, bent to shape required including cranking bending spirally for hoping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M&L for deformed or twisted TMT bars of 6 mm to 8 mm dia and over cut to length, bent to shape required including cranking bending spirally for hoping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

S&F anodised aluminium powder coated of any colour (thickness or powder coating not less than 50 micron) doors shutters aluminium section weighing 0.55 kg/m including necessary jointing cleats, glazing clips, rubber neoprene packing, handles two nos in each door, hinges, anodised aluminium snap beading, screws including taking down and removing to store yard of AGE B/R Tughlakabad complete all as specified and directed.

S&F anodised aluminium powder coated (any colour and thickness of powder coating not less than 50 micron) as window and ventilator shutters side hung type without sash bars, aluminium sections weighting 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays150mm long (1 no), hinges type B-21 100mm long (2 no), suitable handle (1 no) for each leaf including taking down and removing to store yard of AGE B/R Tughlakabad complete all as specified & directed by Engr-in- charge. NOTE For schedule item No's 18 & 19: Old material shall be received through necessary reciept vouchers and the same shall be entered in MB.

S&F aluminium (die cast) body door closer hydraulically regulated designation No.3 universal type suitable for aluminium door shutters of width 851 to 1000mm and of weight between 61 to 80kg complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S&F Galvanised. 2 strand, steel barbed wire of 2.24mm dia babed with 2mm dia barbs at 75mm spacing and straning and fixing to any type of standard rails strain-ing bolts, including securing or tying at crosing with and provision of galvanised mild steel wire, staples or steel pins, etc. (each line wire to be measured) complete all as specified and directed.

M&L for concertina coil reinforced punched (chrome rajor or blade wire) with barbed tap of 0.5 mm thick galvanised steel sheet and core wire of dia 2.5mm high tensile steel wire complete all as specified and directed.

S&F Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 290 Gde E-165 complete all as specified and directed.

S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also welding fastening and fixing complete Fe-290 (Gde E-165) complete all as specified and directed.

Fixing only framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also welding fastening and fixing complete Fe-290 (Gde E-165) duly welding and other necessary fixing materials complete all as specified and directed.

S&F Mild steel, Plain black sheet of 1.00 mm thick as in curtain to steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and directed.

-ditto- All as per srl item No 28.00 above but in repairs.

S&F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required; hooks (stay), heavy, for large gates; hook and pintle hinges; large hasps and staples; chains; handmade sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe Fe-290 Gde-E-165 complete all as specified and directed.

S&F Steel rolling shutters of 1.25mm thickness of laths, without ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated of gear operated type with bevel gear box and crank handle complete all as specified and directed.

Taking down carefully the hood of steel rolling shutter of size not exceeding 5 sqm each for replacement of unserviceable/ defective parts and refixing in the same opening after cleaning of guide rails, laths, top cover by kerosene and proper greasing, oiling, replacement of rusted nut, bolts etc. removing of bend, alignment etc to make good the system and to made good the disturbed surfaces of walls including periodicals to match with the existing complete all as specified and directed.

-ditto- All as per item No 32 above but size exceeding 5 sqm & not exceeding 15 sqm each

-ditto- All as per item No 32 above but size exceeding 15 sqm & not exceeding 25 sqm each. NOTES FOR SCH ITEM NO'S 32 TO 34 Necessary spare parts required for replacement shall be measured and paid separately in relevant items.

S&F 1.25mm thickness of Steel laths or top cover for rolling shutters without ball bearing including one shop coat of primer and erected in position complete all as specified and directed.

M&L for replacement of gear box of steel rolling shutter including handle rack & pinion system and bearing etc for rolling shutter of size exceeding 5 sqm but not exceeding 25sqm each complete all specified & directed by Engineer - in - Charge.

M&L for repair to gear box, rack & pinion system, bearing including necessary welding etc for rolling shutter of size exceeding 5 sqm but not exceeding 25sqm each to make serviceable including minor repair complete all as specified and directed. NOTE: Necessary ball bearing, rolling srings shall be measure and paid separately under relevant items.

S&F Safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and directed.

S&F Ball bearing for rolling shutters complete all as specified and directed.

M&L for replacement of rolling spring for rolling shutter of size not exceeding 5.0 sqm each complete all as specified and directed.

-Ditto- All as per item No. 40 above but for rolling shutter of size exceeding 5 sqm but not exceeding 15 sqm each complete all as specified and directed.

-Ditto- All as per item No. 40 above but for rolling shutter of size exceeding 15 sqm but not exceeding 25 sqm each complete all as specified and directed.

Note: The amount of Rs 49,225 against schedule of credit given on Tender Serial Page No 30 shall be deducted from the total amount quoted by the contractor against BOQ while deriving the contract sum for acceptance.

Neeraj Enterprises

M/s Sagar Construction Company