Refurbishment of Electrical Installations in Creche building and associated works in Anupuram Township.

Amount

Supply and fixing of following Modular front cover plate on existing modular metal/plastic boxes etc. as required. (Refer Sec VI, Clause No.15.7).

One/Two module

3 Module

4 Module

6 Module

1 Modular dummy plate

Supply and Installation of following Wiring Accessories as per the detailed specification (Refer Sec VI (MNC), Clause No.5).

1 No. 10 A Switch on modular plate and termination of wires to the switches

1 No. 16 A Switch on modular plate and termination of wires to the switches

1 No. 6 A 3 Pin shuttered type Socket on modular plate and termination of wires to the switches

1 No. 6 / 16 A 3 Pin combined shuttered type Socket on modular plate and termination of wires to the switches

1 No. RJ11 Jack on modular plate and termination of wires

2 Module Step type Fan regulator suitable for BLDC Fan on modular plate and termination of wires to the switches ( BLDC Regulator ) as per the detailed specification and as directed by Engineer-in-charge.

10 A , 1 No. Gang Bell Push Switch Water tight (IP 66) with indicator as per the detailed specification and as directed by Engineer-in-charge.

Supply, transportation, installation, testing and Commissioning of the following type of Surface mounted luminaires.(Refer Sec VI, Clause No.16.1).

12 Watts (max), 1200 Lumen, 6500 K, square shaped, surface mounting decorative LED flat panel Luminaires as per the detailed specification.

15 Watts (max), 1600 Lumen, 6500 K, square shaped, surface mounting decorative LED flat panel Luminaires as per the detailed specification.

15 Watts (max), 1600 Lumen, 4000 K, square shaped, surface mounting decorative LED flat panel Luminaires as per the detailed specification.

15 Watts (max), 1600 Lumen, 4000 K, round shaped, surface mounting decorative LED flat panel Luminaires as per the detailed specification.

10 Watts (max), 1100 Lumen, 6500 K, LED Bulkhead Luminaires with integrated driver unit made up of aluminium along with suitable PVC insulated connecting wires as per the detailed specification and as directed by Engineer-in-charge.

Supply, transportation, installation, testing and Commissioning of the following types of Battens. (Refer Sec VI, Clause No.16.1).

Supply, transportation, installation, testing and commissioning of 10 Watts,(max) 1000 Lumen, 5700 K, 2 feet long surface mounted LED luminaires as per the detailed specification.

Supply, transportation, installation, testing and Commissioning of the Rope type LED lights in Gypsum Board located in Room Ceiling as per the detailed specification and as directed by Engineer-in-charge.

Rope type LED Lights

Control Driver for Rope type LED Lights

Supply, installation of 9W LED Lamp suitable for E27 type holder as per the detailed specification and as directed by Engineer-in-charge.

Supply, transportation, installation, testing and Commissioning of Space Projection Light - Pro Ultra HD as per the detailed specification and as directed by Engineer-in-charge.

Supply, Installation, testing and commissioning of following sizes of BLDC Ceiling Fans and safety steel rope with suitable PVC insulated connecting wires including earth connection and as per the detailed specification and as directed by Engineer-in-charge.

1200mm Sweep BLDC Ceiling Fan

Supply, installation, testing and commissioning of following sizes of Wall Mounting Fans as per the detailed specification

400 mm sweep MAXX AIR TPW wall mounting fan

Supply, installation, testing and commissioning of following sizes of Exhaust Fans with suitable PVC insulated connecting wires of required length as per the detailed specification.

150 mm dia Medium duty, Double ball bearing exhaust fan

Wiring for lights / fans /sensors/ Power point with 1100V grade FRLS insulated copper conductor wires in existing concealed/ Exposed PVC / ERW / Flo-coated Metal conduits as per the detailed scope of work, including supply of Wires, termination of copper wires at either end by crimping including supply of PVC Sleeves/Ferrules, Copper Crimping Lugs and connecting the wires to various switches, sockets, etc. including testing and commissioning as per the detailed specification. (Refer Sec VI, Clause No.18)

Wiring with 1 Run of 1.5 Sq.mm Copper wire

Wiring with 1 Run of 2.5 Sq.mm Copper wire

Supply and installation of following sizes of Heavy Duty, PVC circular rigid Conduits for Electrical & Communication System with required Solid Long Bends, Couplings, GI Wire etc, in Floor, Walls, Brick, Block Masonry, etc. including chasing & replastering as per the detailed specification.(Refer Sec VI, Clause No.27).

25mm Dia, 2mm wall thickness PVC heavy duty round rigid conduits with 50mm deep Junction boxes

Supply and replacing following earth pit chamber parts after removing and disposing off old/damaged part as per drawing No. IGC/ESD/5060/1008/1.

RCC ring with cover

Supply, fabrication and installation of the following size of Hot dip Galvanised GI Flats including excavation and refilling as per the detailed specification. No cutting or drilling permitted after galvanisation.Refer Sec VI, Clause No.12.9).

25 x 6 mm GI flat

Supply, fabrication and installation of the following size of Hot dip Galvanised GI Flats in Built in trenches on walls, poles, RCC Concrete and through embedded pipes as per the detailed specification. No cutting or drilling permitted after galvanisation. (Refer Sec VI, Clause No.12.9).

25 X 6 mm GI flat

Supply, installation and testing of GI Pipe Earth Electrode as per IS: 3043 including RCC Chamber and RCC cover slab as per Drawing Nos. IGC/ESD/5060/1007/1 & IGC/ESD/5060/1008/1 are enclosed. (50 Kg. Each Bentonite & Charcoal shall be provided for each earth pit). (Refer Sec VI, Clause No.12.4).

Installation of light fixtures (Refer Sec VI (MNC), Clause No.21) Note. Required light fixtures will be issued at free of cost by Department

Installation of light fixtures in labs and low bay areas

Supply and Installation of 25 X 12 mm size of PVC Mini trunking (casing & capping) on walls/Ceiling for routing of Power, Lighting and Telephone wires including all the required accessories like JBs, Coupling, External & Internal Bends, Elbows and end cap as per the detailed specification.(Refer Sec VI, Clause No.29)

Excavation of soil including refilling with excavated earth and disposing surplus earth at places as directed with in a lead of 10 Mtrs. and initial lift upto 1.5 Mtrs. including neat banking as per detailed specification. (Refer Sec VI, Clause No.2)

NANDHAGOPAL ELECTRICAL CONTRACTOR (BID ID -3228666)

Bidder Name

NANDHAGOPAL ELECTRICAL CONTRACTOR

SRIRAM ELECTRICALS