Renovation and Interior Fit-Out Works of SIDBI Office, Kundli, Haryana

16.00 Grand Total 50,10,250.00

Providing and laying integral cement based treatment for water proofing on the

vertical surface by fixing specified stone slab 22 mm to 25 mm thick with cement

slurry mixed with water proofing compound conforming to IS:2645 in

recommended proportions with a gap of 20 mm (minimum) between

stoneslabs and the receiving surfaces and filling the gaps with neat cement slurry

mixed with water proofing compound and finishing the exterior of stone

slab with cement mortar 1:3 (1 cement : 3 coarse sand) 20 mm thick with neat

cement punning mixed with water proofing compound in recommended

proportion complete at all levels and as directed by Engineer-in-charge :Using

rough Kota stone

Steel work welded in built up sections/ framed work, including cutting,

7 10.250 hoisting, fixing in position and applying a priming coat of approved steel

primer using structural steel etc. as required.

7.1 10.25.2 In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works kg 500.00 172.600 86,300.00

Providing and fixing double scaffolding system (cup lock type) on the exterior

side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to

centre, horizontal & vertical tubes joining with cup & lock system with M.S.

tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the

scaffolding for working platform etc. and maintaining it in a serviceable

condition for the required 14.72 duration as approved and removing it thereafter.

The scaffolding system shall be Sqm stiffened with bracings, runners, connection

with the building etc. wherever required for inspection of work at required

locations with essential safety features for the workmen etc. complete as per

directions and approval of Engineer-in-charge.

The elevational area of the scaffolding shall be measured for payment purpose.

The payment will be made once irrespective of duration of scaffolding

Cleaning of old facade glass, removal of existing deteriorated silicone, supply &

application of new weatherproof silicone sealant, and surface treatment to restore

clarity and aesthetics. Includes all necessary materials, equipment, labor, access

(scaffolding or rope), and safety measures.

Digitally signed by AMIT

Sl. No. DESCRIPTION UNIT QTY (DSR AMOUNT MARKET RATE AMOUNT

Total DSR + NDSR 2,83,628.75

Digitally signed by AMIT

Civil & Interior

Sl. No. DESCRIPTION UNIT QTY AMOUNT MARKET RATE AMOUNT

Ref. No. (DSR 2023)

CIVIL & INTERIOR WORKS

Dismantling tile work in floors, Wall and roofs laid in cement mortar including stacking

material within 50 metres lead.

15.23.2 For thickness of tiles above 25 mm and up to 40 mm SQM 10.00 113.55 1,135.50

Dismantling of plumbing fixtures including WC, washbasin, shower and all related low side

works complete.

Demolishing brick work manually / by mechanical means including stacking of

1.3 15.7 serviceable material and disposal of unserviceable material within 50 metres lead as per

direction of Engineer-in-Charge.

15.7.4 In cement mortar CUM 1.00 2,060.20 2,060.20

Dismantling doors, windows and clerestory windows (steel or wood) shutter including

chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead:

15.12.2 Of area beyond 3 sq. metres EACH 2.00 502.75 1,005.50

1.5 1.1 Carriage of material by mechanical transport including loading unloading and stacking

1.1.1 Lime, murrum, building rubbish

2 MASONRY AND PLASTER

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate)

2.1 11.3 finished with a floating coat of neat cement, including cement slurry, but excluding the

cost of nosing of steps etc. complete.

11.3.1 40 mm thick with 20 mm nominal size stone aggregate SQM 10.00 614.20 6,142.00

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation

7.5 in superstructure above plinth level up to floor V level.

6.13.2 Cement mortar 1:4 (1 cement :4 coarse sand) SQM 20.00 1,123.80 22,476.00

Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of

half brick masonry.

CEMENT PLASTER :- 15 mm cement plaster on the rough side of single or half brick wall of

2.5 13.4 12 mm cement plaster of mix

POP PUNNING (12mm-15mm) : Providing and fixing Average 12mm to 15mm thick POP

2.6 MR Punning over cement plaster in line & plumb finished smooth to receive paint. (Internal SQM 40.00 301.33 12,053.05

surfaces of walls).

Digitally signed by AMIT

Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc.,

by applying cement slurry mixed with water proofing cement compound consisting of

applying : a) First layer of slurry of cement @ 0.488 kg /sqm mixed with water proofing

cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours. b)

Second layer of slurry of cement @ 0.242 kg/ sqm mixed with water proofing cement

compound @ 0.126 kg/ sqm. This layer will be allowed to air cure for 4 hours followed with

water curing for 48 hours. The rate includes preparation of surface, treatment and sealing

of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.

AAC BLOCK FILLING: Providing and Laying of AAC Block Filling in the Slab Sunk or Raised

Areas as a Back fill or platform. Laying should be done in layers with pounding done at

every level to ensure a proper cavity free installation without disturbing any existing

services in the area. Cost to also include haunching for plumbing pipes.

3 PAVING AND WET WORKS

TILE DADO :- Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS:

15622 (thickness to be specified by the manufacturer), of approved make, in all colours,

shades except burgundy, bottle green, black of any size as approved by Engineer-in-

Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1

cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including

pointing in white cement mixed with pigment of matching shade complete.

CERAMIC TILE FLOORING :- Providing and laying rectified Glazed Ceramic floor tiles of size

300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality

conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory,

Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse

sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white

cement and matching pigments etc., complete.

Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of

0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin

per kg), including filling / grouting and finishing complete as per direction of Engineer-in-

VITRIFIED TILES: Providing and laying vitrified floor and wall tiles in different sizes (thickness to

be specified by the manufacturer) with water absorption less than 0.08% and conforming

11.41A to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement

3.40 mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm

including grouting the joints with white cement and matching pigments etc. complete.

4 PARTITIONS AND WALL CLADDING

PANELLING- Providing and fixing wall panelling using 12mm thick plywood fixed on one

side of aluminium frame of size 50mm x 25mm x 1.5mm, as per approved sample and

4.1 MR architectural drawings. Aluminium frame to be fixed to wall, floor, and RCC ceiling using SQM 20.00 2,414.28 48,285.62

suitable fasteners. Work to include all necessary materials, labour, tools, fasteners,

adhesive, screws, supports, and complete in all respects.

LAMINATE CLADDING- P/F 1mm thick laminate including 4 mm thick MDF, on an existing

Plywood surface.

Providing and fixing partition using 12mm thick plywood fixed on both sides on aluminium

frame of size 50mm x 25mm x 1.5mm as per approved sample and architectural drawings.

Aluminium frame to be fixed to wall, floor and RCC ceiling using approved fasteners

including cutting, jointing, finishing, screws, adhesive, etc., complete in all respects.

Digitally signed by AMIT

Providing and fixing 12mm thick frameless toughened glass door shutter of approved

brand and manufacture, including providing and fixing top & bottom pivot & double

4.4 21.18 acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for SQM 15 5,325.90 79,888.50

fixing required door fittings, all complete as per direction of Engineer in charge (Door

handle, lock and stopper etc. to be paid separately)

GYPBOARD CEILING :- Providing and fixing false ceiling at all height including providing

and fixing of frame work made of special sections, power pressed from M.S. sheets and

galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and

consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and

37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5

mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers

of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of

angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing

of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of

80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to

centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with

connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction,

including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and

Including jointing and finishing to a flush finish of tapered and square edges of the board

with recommended jointing compound , jointing tapes , finishing with jointing compound

in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for

board, all as per manufacturer's specification and also including the cost of making

openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels

suitably fixed, all complete as per drawings, specification and direction of the Engineer in

Charge but excluding the cost of painting with :

a) 12.45.1 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- Part I SQM 40.00 1,355.80 54,232.00

Providing and fixing mineral fibre false ceiling tiles at all heights of size 595X595mm of

approved texture, design and pattern. The tiles should have Humidity Resistance (RH)

of 99%, Light Reflectance ≥ 85%,Thermal Conductivity k = 0.052 - 0.057 w/m K, Fire

Performance as per (BS 476 pt - 6 &7)in true horizontal level suspended on interlocking T-

Grid of hot dipped all round galvanized iron section of 0.33 mm thick level suspended on

interlocking T-Grid of hot dipped all round galvanized iron section of 0.33 mm thick5x32mm

of length 1200 mm and secondary intermediate cross T of size 15x32 mm of length 600 mm

to form grid module of size 600x600 mm suspended from ceiling using galvanized mild steel

5.4 26.27 item (galvanised@80gsm) 50 mm long 8mm outer diameter M-6 dash fasteners, 6 mm

diameter fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of

size 85x25x2 mm, spaced at 1200 mmcentre to centre along main ‘T’. The system should

rest on periphery walls /partitions with the help of GI perimeter wall angle of

size24x24X3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with help of

plastic rawl plug at 450 mm centre to centre & 40 mm long dry wall S.S. screws. The

exposed bottom portion of all T-sections used in false ceiling support system shall be pre-

painted with polyester baked paint, for all heights. The work shall be carried out as per

specifications, drawings and as per directions of the engineer-in-charge.

26.27.2 With 15 mm thick beveled tegular mineral fibre false ceiling tile (NRC 0.5) SQM 60 2671.2 160272

6 DOORS/ WINDOWS

Digitally signed by AMIT

DOOR FRAMES- Providing wood work in frames of doors, windows, clerestory windows and

other frames, wrought framed and fixed in position with hold fast lugs or with dash

fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for

9.1.1 Second class teak wood CUM 0.50 142949.7 71474.85

FLUSH DOOR:- Providing and fixing ISI marked flush door shutters conforming to IS : 2202

(Part I) non-decorative type, core of block board construction with frame of 1st class hard

wood and well matched commercial 3 ply veneering with vertical grains or cross bands

and face veneers on both faces of shutters :

9.21.1 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws SQM 8.00 2,392.65 19,141.20

Extra for Providing and fixing flush doors with decorative veneering instead of non

decorative ISI marked flush door shutters conforming to IS: 2202 (Part I)

Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all

edges of flush door shutters (over all area of door shutter to be measured)

Providing and fixing wooden moulded beading to door and window frames with iron

screws, plugs and priming coat on unexposed surface etc. complete:

9.40.1 2nd class teak wood

MORTICE LOCK AND LEVER HANDLES- Providing and installing Tubular Handle TH 123 with

6.6 MR Roses & Escutcheon in SS packaged with Mortice lockset 55mm backset, 20 SS forend, SS EACH 4.00 2,650.00 10,600.00

strike plate and EP Cylinder for all flush doors.

TOWER BOLTS:- Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic

6.7 9.97 coating not less than gradeAC 10 as per IS : 1868 ), transparent or dyed to required colour

or shade, complete:

DOOR STOPPER:- Providing and fixing bright finished brass hanging type floor door stopper

with necessary screws, etc. complete.

Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm

diameter bolts, nuts and wooden plugs and embedding in cement concrete block

30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm

6.10 MR Door Closer:- Providing and Fixing Door Closer For Entry Door EACH 4.00 1850 7400

Providing and Fixing ESDH 22x450 mm D-type Handle Material : Stainless Steel. Finish : Satin

6.11 MR Stainless Steel (SSS). of approved make and model all complete as per the direction of Each 6.00 3450 20700

Engineer-in-charge.

Providing and Fixing EMB 245 SS Mortise Lock Body SB/TB for door thickness 25-50 mm for of

approved make and model all complete as per the direction of Engineer-in-charge.

Providing and Fixing FH-943 Double cylender Floor Spring- with Closing Force EN 3 with

Maximum door weight 105 Kg. Maximum door width 950mm.Closing speed : 130° Final

6.13 MR closing speed : 15-0°. Hold Open (standard): 90° hold open. Weight of floor spring approx : Each 6.00 8000 48000

6kg, 5,00,000 cycles Tested with 5 Years Warranty against manufacturing defect. CE

certified for wooden doors all complete as per the direction of Engineer-in-charge.

Providing and Fixing EFS ACC-001,002 top and Bottom Strap of approved make and

model all complete as per the direction of Engineer-in-charge.

Providing and Fixing EDL 024 Dead lock Back set- 50 mm with Key Hole of approved make

and model all complete as per the direction of Engineer-in-charge.

Digitally signed by AMIT

GLASS FILMS: Providing & Fixing Frosted Translucent, cast PVC, self-adhesive vinyl, special

CRYSTAL-effect film to reproduce Sand-blasting effect on glass with customised designs,

thickness of 2 mil (0.05mm) without adhesive & 3mil (0.8)with adhesive having minimum

tensile strength of 3.5 pound/inch at 73 F(0.6 kg/cm at 23 C). Adhesion after 24hrs of

6.16 MR installation should be 4 pounds/inch (0.7 kg/cm) on Acrylic, Glass Polycarbonate: MCS SQM 10 1650 16500

warranty of 3yrs (if exposed to direct sunlight) to 15yrs (indoors) must be endorsed

by 3M India Limited Architectural Market Department. Contractors payment wouldn't be

released until & unless he/she produces orginal warranty certificate from the

7 FINISHES & MISCELLANEOUS

Wall painting with acrylic emulsion paint, having VOC content less that 50 grams / litre, of

7.1 13.82 approved brand and manufacture, including appliying additional coats wherever

required, to achive even shade and colour.

Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to

prepare the surface

Applying priming coats with primer of approved brand and manufacture, having low VOC

(Volatile Organic Compound ) content.

With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC

content less than 50 grams/ litre

LAMINATED STORAGE CABINET FOR GENERAL STORAGE- Out of 19mm BWP Ply Board

finished using 1mm thick Laminate. The storage to be complete with all hinges, drawer

glides and hardware from approved make. All internal surfaces to be completed using

balancing laminate. Including brass D-type handles for shutters and recessed type handles

for drawers or as approved. Storage to be of all heights as per design. Storage shutters to

be made in solid laminate/ glass as per design and drawings.

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and

prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and

similar locations of required size, approved shade, colour and texture laid over 20 mm

thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement,

mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and

polishing to edges to give high gloss finish etc. complete at all levels.

8.2.2 Granite stone slab colour black, Cherry/Ruby red

8.2.2.2 Area of slab over 0.50 sqm sq.m 5 5,136.30 25,681.50

Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen

platform, vanity counter and similar location in marble/ Granite/ stone work, including

necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges

Digitally signed by AMIT

BLINDS Providing & supplying of Window Blinds as per the approved sample in

required shade and style consisting, of ZEBRA BLINDS comprising of optima screen Fabric

comprising of 22% polyester, 78% PVC, Fabric weight 460-480G weight per sq m, Thickness

0.67 mm, Yarn count 18- 19/cm, having fire resistance standard – NFPA 701-89 small

testing ISO- 5659-2 .Thetear resistance should be complying to ISO4674 & breaking

resistance – ISO 5081. The DRIVE UNIT shall be of clutch for quick, easy and safe installation,

moulded plastic with steel spring support and inserted into the tube end. It shall be driven

by a ball chain pulley with ball chain and can be positioned at right side or left hand side

of the Shade. The Shade when lowering or raising, shall be automatically locked in position

upon release of the ball chain by means of a built in friction lock.Universal clutch for left

and right hand operation.Chain Gear Ratio of 1.75:1. The END PLUG shall be molded of

plastic witha steel location pin.The plug shall be inserted into the tube end.(Opposite to

the Drive Unit) for ease of installation. The SUPPORT BRACKETS shall be of coated steel &

provided with covers and used in right hand or left hand positions differentiated by the

acceptance of the of the rectangular drive unit support or the round idler plug pin.Can

beinstalled (a) On Face (b) Ceiling Mount (c) On Frame

(d) in Recess. The Bracket should be protruding outside maximum of

80mm.The ROLLER TUBE shall be of extruded aluminum with 37mm internal diameter & skin

thickness of 1mm and shall incorporate a key way integral with the tube to accommodate

the spline. The BOTTOM RAIL shall be a Flat Bottom made up of powder coated steel. The

BALL CHAIN shall be 2mm diameter cord with 4.5mm diameter acetal balls moulded co-

axially to it on 6mm pitch to form an endless ball chain. It is used for raising or

Providing & Fixing of Flocked textile floor covering of Nylon 6.6 face fiber or equivalent of

approved make with 100% Nylon and completely water proof resilient backing. The

flooring should be Anti static with thickness of

4.3 mm and approximate weight of 1.8 k.g./sqm of roll form. The carpet should be

completely stain resistant and of a density approx. 80 million fibers/sq.mtr (70 million

3.3 NS fiber/sq.yd) in the width of 2 mtr .The floor covering should have Fire Test EN-13501, sqm 12.00 1,650.00 19800

Appearance Retention Hexapod ISO 140- 8, Friction Slip Resistance Test EN 14041 Class DS,

SANITISED anti-microbial treatment, with resilient waterproof backing, anti allergic which is

certified by British allergy foundation, with ten year replacement guarantee. The carpet

should have permanent static control & should be fixed with powder coated

aluminum angles as per detail. Aluminum angles to be paid separately.

Providing & fixing of 3mm thcik vinyl flooring as per sample approved cost including

wastage and fixing charges completel

Complete job of Grinding, Polishing, Cleaning, Filling of marble on stairs, including risers

and treads – all materials, labour, tools & equipment included

Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels,

plates etc., including welding, grinding, buffing, polishing and making curvature (wherever

required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c

fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel

bolts etc., of required size, on the top of the floor or the side of waist slab with suitable

arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of

stainless steel members shall be considered excluding fixing accessories such as nuts, bolts,

fasteners etc.).

SUB TOTAL OF FINISHES 7,21,293.40 6,28,433.79

Digitally signed by AMIT

SUB HEAD A: SANITARY FIXTURES & FITTINGS

DSR Rate DSR Amount

SL. NO. DSR - DESCRIPTION OF ITEMS UNIT Qty NS Rate (Rs.) NS Amount (Rs)

Supply, installation, testing and commissioning of glazed vitreous china single trap syphonic pattern having back inlet,

supporting chair, wall hung water closet complete with all internal fittings/ accessories and CP brass flush bend

1 MR (European type) water closet with seat and lid, with C.P. brass hinges and rubber buffers, adapter, rubber joints fixed

to W.C., C.P. brass screwed washers including cutting and making good the walls and floors wherever required and

HDPE WC pan connector including jointing with white cement complete in all respects.

Wall hung W.C. pan (White colour)with white plastic seat & lid "Thermoset moulded ( bakelite ) IS 2548 Part I Each 2 19,250.00 38,500.00

Supply, installation, testing and commissioning of concealed cistern including flush plate and all internal fittings/

accessories including cutting and making good the walls and floors wherever required complete in all respects.

Supply, installation, testing and commissioning of glazed vitreous china wash basin with R.S. or C.I. brackets painted

3 MR white, 32mm C.P. brass waste of standard pattern , C.P brass wall flange 32 mm dia. C.P. brass bottle trap and union

32 mm dia C.P. pipes to wall flange. complete including cutting and making good the walls wherever required.

3.1 Table Top wash basin Each 2 8,250.00 16,500.00

Supply, installation, testing and commissioning of 15mm C.P. brass single hole wash basin mixer without popup waste

system with 450mm long copper pipes and brass nut

5 MR Providing & fixing toilet paper holding including cutting and making good the walls. Each 2 1,579.64 3,159.27

Providing & fixing Horizontal liquid soap dispenser with stainless steel lid and brackets fixed to wooden cleats with C.P.

brass screws. (Model No.ES43)

7 MR Providing & fixing C.P. brass coat hooks fixed on toilet door with C.P. brass screws Each 2 688.84 1,377.69

Providing & fixing beveled edge mirror 5.5mm thick of superior quality plate glass complete with 6mm thick marine

8 MR ply sheet ground fixed to wooden cleats with CP brass screws and washerswith 40 mm wide teak wood frame as Sqm 1.5 2,836.09 4,254.14

per design including polishing

9 MR Providing & fixing Hand Shower (Health Faucet) with 8mm dia, 1M long PVC tube and wall hook CP brass wall flange Each 2 1,797.80 3,595.61

Providing & fixing, testing and commissioning of storage type electric water heater with automatic thermostatic

10 MR control electric element, pressure release valve, brackets fixed to expansion fasteners with M.S. nuts and bolts all

complete including cutting and making good the walls wherever required.

05 litres capacity (Horizontal /Vertical type1.5 kw electrical load). Each 1 8,500.00 8,500.00

11 MR Providing & fixing 15 mm dia C.P. brass bib cock with C.P. wall flange of approved quality. Each 2 1,605.43 3,210.87

Providing and fixing of stainless steel finish Paper Towel Dispenser having capacity of 300-350 paper towels fixed to

wooden cleats with C.P. brass screws

14 MR Providing and fixing of Urinal With Automatc Flushing Cistern Each 1 24,000 24,000.00

15 MR Providing and fixing of Bottale Trap Each 2 2,250 4,500.00

16 MR Providing and fixing of Towel Rod Each 2 1,850 3,700.00

Providing and fixing C.P. bass angle valve for basin mixer and geyser points of approved quality conforming to

I.S:8931 a) 15 mm nominal bore.

Providing and fixing unplasticised P.V.C connection pipe with PTMT Nuts coller and bush of approved quality and

18.74.2 15mm nominal bore with 45cm length Each 4.00 121.90 487.60

1 MR Supply, Installation, Testing and Commisioning of SINGLE LEVER sink mixer EACH 1 5500 5500

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless

steel plug 40 mm, including painting

5 17.28 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.

Digitally signed by AMIT

DSR Rate DSR Amount

SL. NO. DSR - DESCRIPTION OF ITEMS UNIT Qty NS Rate (Rs.) NS Amount (Rs)

6 17.28.2 Flexible pipe

Providing and fixing rectangular high density polyethylene water storage loft tank with cover, conforming to ISI :

18.48A 12701, colour of opaque white or as approved by Engineer-in-charge. The rate includes making necessary holes for per litre 2000 11.00 22000

inlet, outlet & over flow pipes. The base support i/c fittings & fixtures for tank shall be paid separately.

TOTAL CARRIED OVER TO SUMMARY 27,082.00 1,58,554.35

Digitally signed by AMIT

SUB HEAD B: WATER SUPPLY

DSR Rate NS Rate

SL. NO. DSR /NS DESCRIPTION OF ITEMS UNIT Qty DSR Amount (Rs) Amount

Providing and fixing Chlorinate Polyvinyl Chloride (CPVC) pipes having

thermal stability for hot & cold water supply including all (CPVC) plain & brass

1 18.7 threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This

including jointing of pipes & fittings with one step CPVC solvent cement and

testing of joints complete as per direction of engineer in charge. .

Internal Work - Exposed on Wall

18.7.4 32 mm nominal outer dia pipes. Metre 15.00 518.75 7,781.25

Providing and fixing Chlorinate Polyvinyl Chloride (CPVC) pipes having

thermal stability for hot & cold water supply including all CPVC plain & brass

threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This

including jointing of pipes & fittings with one step CPVC solvent cement and

the cost of cutting chases and making good the the same including testing of

joints complete as per direction of engineer in charge.

Concealed work including cutting chases and making good the walls etc.

18.8.2 20 mm nominal outer dia pipes. Metre 30.00 537.60 16,128.00

18.8.3 25 mm nominal dia Pipes Metre 15.00 627.25 9,408.75

18.8.4 32 mm nominal dia Pipes Metre 7.00 736.30 5,154.10

3 18.16 Providing and fixing brass stop cock of approved quality complete.

18.16.1 15 mm nominal bore Each 0.00 353.25 0.00

18.16.2 20 mm nominal bore Each 1.00 379.20 379.20

Providing and fixing gun metal gate valve with C.I. wheel of approved quality

18.17.2 32 mm nominal bore Each 1.00 689.95 689.95

Sub-Total of Water Supply Installation, Separate for Scheduled & Non-Scheduled Items 39,541.25 0.00

Digitally signed by AMIT

SUB HEAD C: INTERNAL DRAINAGE (SOIL, WASTE & VENT PIPES)

DSR Rate NS Rate DSR Amount NS Amount

DSR /NS SR NO DESCRIPTION OF ITEMS UNIT Qty

Providing, fixing, jointing and testing in position of ISI marked UV stabilized UPVC pipes for soil, waste,

and vent, Type-B as per IS : 13592 suitable for rubber ring joints, including all neccessary specials and

fittings (confirming to IS:14735) i.e. bends, tees, junctions (with or without doors), reducers, WC

connectors, couplers, expansion joints / bellows, cowels, clamps, rubber rings, clean outs etc. fixing at

wall/ ceiling/ floor level supported by clamp & hangers etc. in concealed / inside duct / under floor &

basement ceiling / external work etc. including chase cutting as required, excavation and back filling

in all kind of soils, suspended from floor under false ceiling or embedding the pipes laid under floors /

20 building in 75 mm. alround 1:2:4 cement concrete (1 cement : 2 coarse sand : 4 graded stone

aggregate 20 mm nominal size) including cost of shuttering for proper completion of the work,

MR breaking and making good the walls and floors etc. after pipes have been duly laid and tested. The

rubber ring shall confirm to IS:5382.

The Pipes will be supported with threaded G I rods & U clamps with nuts, washers etc on 50x50x5 mm

slotted angle. The cost will include all support arrangements. The work includes commissioning of all

pipes lines as per drawings and specifications and as directed by engg-in-charge at site.

a 110 mm dia (Wall Thickness - 3.2 to 3.8 mm) METRE 10.00 536.00 5,360.00

b 75 mm dia (Wall Thickness - 3.2 to 3.8 mm) METRE 10.00 416.00 4,160.00

Providing, fixing, jointing and testing in position ISI marked (IS:4985) UPVC pipes of min 6 Kg/ Sqcm

rating with fitting for waste pipe from fixtures to floor trap including reduces, enlarger, socket,

couplers, bends, tees etc including fixing at wall/ ceiling level supported by clamp & hangers etc.

MR 21 cutting holes in wall/ floors/ slabs and making good the same with cement concrete 1:2:4 complete

Providing & fixing UPVC Floor trap of self cleansing design with stainless steel grating complete in all

MR 22 respects.

Plain Floor Trap (4" Ht) with 50 / 75 outlet and with height raiser EACH 4 536.00 2,144.00

MR 23 Extra for providing & fixing 125 mm dia C.P. grating in place of C.I. grating over floor traps. EACH 4 726.00 2,904.00

Providing & fixing of SS Floor Cleanout, round or square with rubber seal and flat round cover with

screws and other required fitting complete as required.

Sub-Total of Drainage Installation, Separate for Scheduled & Non-Scheduled Items 0.00 19,217.00

Digitally signed by AMIT

SCHEDULE OF QUANTITIES - ELECTRICAL WORKS

DSR NO DESCRIPTION TOTAL AMOUNT

DSR NO DESCRIPTION TOTAL AMOUNT

S NO UNIT QUANTITY RATE AMOUNT

2022 DSR (INR) NON-DSR (INR)

A POINT WIRING

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC

insulated copper conductor single core cable in surface / recessed medium class PVC

A.1 conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5

sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.

Wiring for group controlled (looped) light point/ fan point/call bell point (without independent

switch etc.) with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface

A.2 / recessed PVC conduit, and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper

conductor single core cable etc as required.

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core

A.3 1.12 cable in surface/ recessed medium class PVC conduit alongwith 1 No 4 sq. mm FRLS PVC Metre 50 334.00 16,700.00

insulated copper conductor single core cable for loop earthing as required.

Supplying and fixing following modular switch/ socket on the existing modular plate & switch

box including connections but excluding modular plate etc. as required.

1.24.4 3 pin 5/6 amp socket outlet Each 20 122.00 2,440.00

1.24.5 6 pin 15/16 amp socket outlet Each 20 197.00 3,940.00

Supplying and fixing modular blanking plate on the existing modular plate & switch box

excluding modular plate as required.

Supplying and fixing following size/module, GI box along with Modular base & cover plate on

existing modular metal boxes etc. as required.

B SUBMAIN AND CONTROL WIRING

Digitally signed by AMIT

DSR NO DESCRIPTION TOTAL AMOUNT

DSR NO DESCRIPTION TOTAL AMOUNT

S NO UNIT QUANTITY RATE AMOUNT

2022 DSR (INR) NON-DSR (INR)

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FR PVC

1.14 insulated copper conductor, single core cable in surface/ recessed medium class PVC

conduit as required

1.14.3 2 X 4 sq. mm + 1 X 4 sq. mm earth wire Metre 150 334.00 50,100.00

1.14.4 2 X 6 sq. mm + 1 X 6 sq. mm earth wire Metre 20 439.00 8,780.00

1.14.10 4 X 10 sq. mm + 2 X 6 sq. mm earth wire Metre 20 1005.00 20,100.00

1.14.11 4 X 16 sq. mm + 2 X 6 sq. mm earth wire Metre 0 1365.00 0.00

Supplying and making end termination with brass compression gland and aluminium lugs for

9.1 following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1

KV grade as required.

Supply of following XPLE armourned 1.1 KV grade conforming to I.S.7098/1554 Aluminium

Conductor Cables :

C.2 Supply of following sizes of PVC sheathed PVC/XLPE insulated Aluminium conductor armoured

cable of 1.1 KV grade conforming to IS:7098 part-1 / IS:1554 part-1 respectively & ISI marked.

(e) 3.5 C x 35 Sqmm XLPE cable RM 50 850.00 42,500.00

Supply of following sizes of copper cables -PVC sheathed PVC/XLPE insulated Copper

C.3 MR conductor armoured cable of 1.1 KV grade conforming to IS:7098 part-1 / IS:1554 part-1

respectively & ISI marked.

(a) 4 C x 16 Sqmm XLPE copper cable RM 20 1850.00 37,000.00

(b) 4 C x 25 Sqmm XLPE copper cable RM 0 2140.00 0.00

Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit

2.10 breaker suitable for inductive load of following poles in the existing MCB DB complete with

D.2 connections, testing and commissioning etc. as required.

Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB

DB complete with connections, testing and commissioning etc. as required.

Digitally signed by AMIT

DSR NO DESCRIPTION TOTAL AMOUNT

DSR NO DESCRIPTION TOTAL AMOUNT

S NO UNIT QUANTITY RATE AMOUNT

2022 DSR (INR) NON-DSR (INR)

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB

distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar,

neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing

D.4 etc. as required. (But without MCB/ RCCB/ Isolator)

MR 12 way (4 + 36), Double door Each 2 9081.00 18,162.00

Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts,

residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes

in the existing MCB DB complete with connections, testing and commissioning etc. as

E PROVISIONS FOR VOICE, DATA, SECURITY & TV SYSTEMS

Supplying and fixing following modular switch / socket on the existing modular plate & switch

E.7 box including connections but excluding modular plate etc. as required.

1.24.7 TV socket outlet Set 2 148.00 296.00

Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE

E.11 1.19 insulated, shielded with fine tinned copper braid and protected with PVC sheath in the Meter 50 47.00 2,350.00

exisitng surface/recessed steel/ PVC conduit as required

Supplying and fixing of following sizes medium class PVC conduit aong with accessories in

1.21 surface/ recess including cutting the wall and making good the same incase of recessed

conduit as required

Supplying and Installation of following size perforated of painting with powder coating M.S.

cable trays of perforation of not more than 17.5% in convinient sections, joined with

E.13 connectors suspended from the cieleing with MS suspenders including bolts and nuts painting

suspenders etc as required

4.1.6 450 mm width x 50 mm depth x 2 mm thickness Metre 10 1137.00 11,370.00

Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and

F.1 5.6 providing masonry enclosure with cover plate having locking arrangement and watering SET 1 13838.00 13,838.00

pipe of 2.7 metre long etc. with charcoal/coke and salt as required.

Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as

Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as

F.4 5.16 Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required. MTR 15 70.00 1,050.00

Total of Electrical items 400537 97662

Digitally signed by AMIT

1.0 VRF/VRV OUTDOOR UNIT Unit Rate Total Qty DSR Amount NDSR Amount

Supply , Installation, Testing and Commissioning of Air Cooled Hi

Wall split type Air conditioners complete with Indoor unit(IDU),

Out door unit (ODU), surface / concealed copper Refrigerant

piping with insulation (closed cell elastomeric nitrile rubber

tubular pipe section) upto 3 Mtr (IDU to ODU), copper power

cable upto 3.5 Mtr (IDU to ODU) i/c drain pipe R-32/R-410/ R-407

Green Refrigerant, wireless Remote control, suitable for working

between 180-260V with low & high voltage cutoff and 50 hz ,1

phase AC supply capable of performing cooling,

dehumidification, air circulation of following capacity with

Scroll / rotary compressor. The system shall be able to deliver

100% of the rated capacity upto 42 Degree Celsius. Min 5 year

Original Equipment Manufacturer (OEM) warranty both

compressor and Printed Circuit Board (PCB). Must comply :

Electrical cable IS 694 or IS 9968 temperature sensing control IS

/International Electro technical Commission (IEC) 60730,

hermetic compressor IS 10617, heat exchanger IS 11329,

capacitor IS 2993 and motor IS 12615. Complete as per CPWD

specification and IS : 1391 Part II 2023. The system shall be able

to operate up to 50 0C (out door ambient temperature).

Inverter Type - Cooling only

8.2.2 1.0 TR with 5 Star BEE Rating Each 39196 1 39196

Digitally signed by AMIT

1.0 VRF/VRV OUTDOOR UNIT Unit Rate Total Qty DSR Amount NDSR Amount

Supply, Installation, Testing and Commissioning of Air Cooled

Cassette type Air conditioners complete with Indoor unit(IDU),

Out door unit (ODU), R-32/R410A/R-407 Green Refrigerant,

wireless Remote, inbuilt drain pump, suitable for 400/230V, 50 Hz

,1 /3 phase AC supply, including surface /concealed copper

Refrigerant piping with insulation (closed cell elastomeric nitrile

rubber tubular pipe section) upto 5.5 Mtr (IDU to ODU), copper

power and control cable upto 5.5 Mtr (IDU to ODU) including

drain pipe, the system shall be capable of performing cooling,

dehumidification, Air circulation, filtration & ventilation of

following capacity with Scroll/rotary compressor with min 5 year

Original Equipment Manufacturer (OEM) warranty both

compressor and Printed Circuit Board (PCB) as specified. The

system shall be able to deliver 100% of the rated capacity as

per relevant IS Code. The lab testing reports as per IS: 1391 shall

be submitted from National Accreditation Board for Testing and

Calibration Laboratories (NABL) accredited as per International

Electro technical Commission (IEC) 17025 standards / Central

Power Research Institute (CPRI)/Electrical Research and

Development Association (ERDA)with Original Equipment

Manufacturer (OEM) etc. complete as per CPWD specification

and as per IS: 1391 as required.

Inverter Type- Cooling only

8.4.1 1.5 TR with 5 Star BEE Rating Each 67095 6 402570

8.4.2 2.0 TR with 5 Star BEE Rating Each 74300 2 148600

8.4.5 3.5 TR with 5 Star BEE Rating Each 120995 1 120995

2.0 REFRIGERANT PIPING

Digitally signed by AMIT

1.0 VRF/VRV OUTDOOR UNIT Unit Rate Total Qty DSR Amount NDSR Amount

Supply, Installation, testing and commissioning including

vaccumiazation and Nitrogen testing of following nominal sizes

of soft/hard drawn copper refrigerant piping for VRV/VRF

system, complete with fittings, with suitable adjustable ring type

2.0 7.14 hanger supports, jointing/brazing including accessories,

insulated with XPLE Class-O tubular insulation/with Class-O

closed cell elastometric nitrile rubber tubular sleeves sections of

19 mm thick insulation as given below for Suction and Liquid

lines, all accessories as per specifications etc. as required :

9.5 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with

19 mm thick insulation

12.7 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with

19 mm thick insulation

15.86 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with

19 mm thick insulation

19.0 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with

19 mm thick insulation

22.2 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with

19 mm thick insulation

3 CONDENSATE DRAIN UPVC PIPE

Supply, installation, testing and commissioning of uPVC Pipe

,complete with fittings, supports,U trap arrangement, Clean

Plug with 6mm nitrile insulation and accessories as per

specifications, drawings.

Providing and fixing control cum transmission wiring of 2 core x

4.3 MR 1.0 sq. mm copper in suitable conduits between indoor and Mtr 161.6 120.00 19,392.00

Supply and fixing IP-55 based outdoor MCB box with 1 NOS 65

Supply and fixing MS base frame for VRV outdoor stand as per

Total Amount 849401 64013

Total Amount 849401 64013

Digitally signed by AMIT

S No Description UNIT QUANTITY RATE

A. DSR/MR UTP Components for Data DSR (INR)

Supply, Fixing & Laying of CAT 6 UTP cable 23 AWG solid copper conductors for

1 1.53 Connectivity of Hub room to End Point.High Speed Gigabit Ethernet U/UTP, 250 MHz, Mtr 300 57.00 17100

Class E, 23 AWG, Unshielded LSZH Cable, C6

Supply, Installation, Testing and Comissioning of I/O port for CAT6 cable termination at

Work Station end. Keystone Unshielded Outlet, 180DG C6

Supply , Installtion , Testing and Comissioning of CAT6 patch cord 2 Mtr (7 feet)

3 MR for information outlet (I/O) to end user device connectivity.High Speed Gigabit Nos. 18 275.00 4950

24AWG U/UTP Patch Cord, LSZH, C6

Supply , Installtion , Testing and Comissioning of CAT6 patch cord 1 Mtr (3 feet) for

4 MR information outlet (I/O) to Rack End Redantant device connectivity.High Speed Gigabit Nos. 18 280.00 5040

24AWG U/UTP Patch Cord, LSZH, C6

Supply , Installtion , Testing and Comissioning of 24 port Loaded Jack Panel for CAT6A

cable termination at rack end. Data Active

Supply, Fixing & Laying of CAT 6 UTP cable 23 AWG solid copper conductors for

6 1.53 Connectivity of Hub room to End Point.High Speed Gigabit Ethernet U/UTP, 250 MHz, Mtr 300 57.00 17100

Class E, 23 AWG, Unshielded LSZH Cable, C6

Supply , Installtion , Testing and Comissioning of I/O port for CAT6 cable termination at

Work Station end. Keystone Unshielded Outlet, 180DG C6

Supply , Installtion , Testing and Comissioning of 24 port Loaded Staggred Jack Panel for

CAT6 cable termination at rack end. Voice Active

Supply , Installtion , Testing and Comissioning of CAT6 patch cord 1 Mtr (3 feet)

9 MR for information outlet (I/O) to end user device connectivity. (Rack end), High Speed Nos. 10 235.00 2350

Gigabit 26AWG Patch Cord, LSZH, C6

Supply , Installtion , Testing and Comissioning of CAT6 patch cord 2 Mtr (7 feet)

10 MR for information outlet (I/O) to end user device connectivity.High Speed Gigabit Nos. 10 275.00 2750

24AWG U/UTP Patch Cord, LSZH, C6

Supply , Installtion , Testing and Comissioning of 2 Port British Style Shuttered Face Plate

white for I/O fixing at user side

Supply , Installtion , Testing and Comissioning of 24 port Loaded Staggred Jack Panel for

CAT6 cable termination at rack end. Riser Active

C Network Rack and Other Accessories

SITC of 24U 600x600 Server Rack with perforation, Glass Door, Cable managemenet,

6/16A power strips- 2 nos, Castors, 4 fan for cooling, Rack should have shelves - 4 nos

16 MR Supply & Installation Testing & Commissioning of 24 PORT managed Network Switch Nos. 1 44,500.00 44500

Digitally signed by AMIT

IP BASED CCTV SYSTEM DSR (INR) NON-DSR (INR)

S No Description UNIT QUANTITY RATE TOTAL AMOUNT

S No Description UNIT QUANTITY RATE TOTAL AMOUNT

Supply, installation, testing and commissioning of 2MP 2.8mm/3.6mm

wide angle fixed lens IR Dome Camera 1/3" Progressive Scan CMOS;

H.265+/H.265/H.264+/H.264/MJPEG; Colour: 0.01 lux @(F1.2, AGC ON),

streams; 3D DNR; ICR; EXIR 2.0, up to 30m; DC12V&PoE

2 Supply, installation testing and commissioning of Network Video Nos.

recorder Linux based to manage and control all the cameras from

control room. Software shall support maximum 16 channel

M.R with joystick controller. 256Mbps Bit Rate Input Max(up to 32-ch IP 1 44500.00 44,500.00

video), 2 SATA Interfaces, alarm I/O: 16/4, 1.5U case,19" with 2x4TB i.e.

Supply Installation Testing & Commissioning of 43 inch Full HD LED

3 M.R monitor including wall mount brackets/ clamps/ desk mounting Nos. 1 43250.00 43,250.00

Supply & Fixing of PCB based Information Outlet (I/O) RJ45, TIA-568C

Category-6, Termination of Catergory-6 UTP Cable, UL listed, Shall

conform to Category-6 as per the EIA/TIA-568C.2, Shall support

network line speeds up to 1 Gbps, Shall have RJ-45 type connector

with bend limiting and strain relief boot for securing IDC contacts

from external forces and for maintaining the bend radius of the

cable, Shall have minimum durability of 750 mating cycles and

200 termination cycles. Shall be certified by independent labs

like ETL/GHMT for compliance to EIA/TIA-568C.2. The outlet shall be

fixed in existing box & cover plate in wall/furniture/floor complete as

Supply & Fixing of Single Faceplate, Single Port (RJ45-DATA) square

plate having spring shuttered front access for preventing ingress

5 M.R of dust, dimension as per commercially available modular office Nos. 10 80.00 800.00

Digitally signed by AMIT

S No Description UNIT QUANTITY RATE TOTAL AMOUNT

S No Description UNIT QUANTITY RATE TOTAL AMOUNT

Supply & Fixing of UTP Jack Panel UL listed, loaded with 24 no's UTP

ports for PCB based IO Jacks (RJ45, TIA- 568C Category-6),

having integrated bonding bar or other mechanism for

grounding, loaded with individually replaceable 24 nos.

Category-6 I/O Jacks complying with TIA-568.C.2. Shall be 6

6 M.R port module construction for better cable dressing at the rear. The Nos 1 16500.00 16,500.00

jacks shall have RJ-45 type connector with bend limiting and strain

relief boot for securing IDC contacts from external forces and for

maintaining the bend radius of the cable.

Supplying & Fixing of Category 6, UTP patch cords constructed

of 24 AWG unshielded twisted pair stranded copper cable with an

enhanced performance modular plug at each end. Patch cord

cable shall be offered in multiple coloured UTP cable for design

7 M.R flexibility with a clear strain relief boot on each modular plug. All Nos. 10 235.00 2,350.00

patch cords shall be compatible with both T568A and T568B wiring

schemes. UTP Cable, 2 Meter.

Supplying & Fixing of Category 6, UTP patch cords constructed

of 24 AWG unshielded twisted pair stranded copper cable with an

enhanced performance modular plug at each end. Patch cord

cable shall be offered in multiple coloured UTP cable for design

8 M.R flexibility with a clear strain relief boot on each modular plug. All Nos. 10 275.00 2,750.00

patch cords shall be compatible with both T568A and T568B wiring

schemes. UTP Cable, 1 Meter.

Digitally signed by AMIT

SCHEDULE OF QUANTITIES - LIGHTING WORKS

S NO 2025 Description Unit QTY Rate DSR AMOUNT

LED Down lighter (SMD Type) (System lumen efficacy ≥ 105 < 120

lm/Watt ) Supplying, installation, Testing & Commissioning of LED

Recessed/ surface Down lighter (Round/ square/ Rectangular) SMD type

of following body material with PMMA and prismatic diffuser and

construction as per IS : 10322 with driver as per the requirement with

Driver efficiency >85%, Operating voltage AC 140-270 Volt, frequency

50/60 hz, Operating temp range -15 deg to 40 deg centigrade, internal

surge protection of 2.5 KV with Short & Open circuit protection ,THD <

10% , P. F.≥0.95, IP20, CRI >80 , UGR (Unified Glare Rating) < 19, Flicker free

(flicker should be below 5%), life time (LED,Driver & electrical circuitary),

of minimum 50000 Burning Hours with 70% of initial Lumen maintained till

life ends , CCT 3000°K / 4000°K / 5700°K / 6000°K / 6500°K (As per ANSI Bin),

1 1.1 SDCM (Standard Deviation Color Matching) <3, Maximum power

consumption should not more than the specified rating and Fixture shall

be confirming to relevant BIS standards and trade mark certificate (T.C.).

Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing

on housing Complete in all respect i/c connections with 1.5 sq mm FRLS,

PVC insulated copper conductor single core cable and earthing etc. as

required with Minimum 5 year OEM warranty. System lumen efficacy ≥105

and <120 lm/Watt output . LM79 & LM80 Test report from NABL lab for all

testing required for LED fixtures as per BIS shall be submitted. Shape size

and CCT shall be as approved by Engineer-in-Charge as per

requirement. (Thermal management: heat sink of aluminum housing such

that LED junction temperature shall not rise above 90°C) Powder coated

die cast /Extruded aluminum Body including trim1

Digitally signed by AMIT

LED Panel light 2x2 ft. (System lumen efficacy ≥105 <120 lm/Watt)

Supplying, installation, Testing & Commissioning of Panel light 2x2 ft., of

following body material and construction as per IS : 10322 with driver as

per the requirement with Driver efficiency >85%, Operating voltage AC

140- 270 Volt, freq 50/60 hz, Operating temp range -15 deg to 40 deg

centigrade, internal surge protection of 2.5 KV with Short & Open circuit

protection, THD < 10% , P. F.≥0.95, IP20, CRI >80, UGR (Unified Glare

Rating) < 19, Flicker free, (flicker should be below 5 %), life time

(LED,Driver & electrical circuitry), of minimum 50000 Burning Hours with,

70% of initial Lumen maintained till life ends as per LM80 extrapolation IES

TM-21-11 report, CCT 3000°K / 4000°K / 5700°K /6000°K / 6500°K (As per

ANSI Bin), SDCM(Standard Deviation Color Matching) <3, Maximum

power consumption should not more than the specified rating and

Fixture shall be of relevant BIS standard and trade mark certificate ( T.C.).

Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing

on housing. complete in all respect i/c connections with 1.5 sq mm FRLS,

PVC insulated copper conductor single core cable and earthing etc. as

required with Minimum 5 year OEM warranty. System lumen efficacy ≥105

<120 lm/Watt output . LM79 & LM80 Test report from NABL lab for all

testing required for LED fixtures as per BIS shall be submitted. Shape size

and CCT shall be as approved by Engineer-in-Charge as per

requirement. (Thermal management: heat sink of aluminum housing such

that LED junction temperature shall not rise above 90°C). Powder coated

die cast / Extruded aluminium Body (Thickness ≥ 1.20 mm)

Digitally signed by AMIT

Fire Alarm Works

S.NO. DESCRIPTION Qty UNIT RATE

NO. Amount AMOUNT

INTELLIGENT FIRE ALARM SYSTEM

Supplying, installation, testing & commissioning of

(ii) M.R FIRE PANEL upto 2 zone complete as required. 1.00 No. 14500.00 14500

Supplying, installation, testing & commissioning of smoke

c) 17.1.2 detector with built in LED and Mounting base complete withb 12.00 No. 1153.00 13836.00

all Connections etc. as required.

Supplying, installation, testing & commissioning of manual call

boxes of MS construction in Surface/ Recess with Stainless Steel

17.1.3 chain & hammer Assembly complete with glass and push 2.00 No. 474.00 948.00

button etc. as Required.

Supplying, installation, testing & commissioning of response

indicator on surface/recessed MS Box having two LED, metallic

d) 17.1.5 cover complete with all connections etc as required. 7.00 No. 196.00 1372.00

Supplying, installation, testing & commissioning of Fire alarm

Sounder with Facility to make annoucement, mountedc in M.S

e) 17.1.6 Box (16 SWG) with Hinged cover plate & Suitable for operation 2.00 No. 557.00 1114.00

with Amplifier i/c line matching transformer etc complete as

CABLING & WIRING

Supplying & laying of 2x1.5 sqmm fire survival alarm armoured

cable, 600/1000V rated with annealed copper conductor

a) 17.5.2 having XLPE insulation, steel wire armouring & ERLS outer 200.00 Metre 173.00 34600.00

sheath complete as required.

Digitally signed by AMIT

SCHEDULE OF QUANTITIES: SIGNAGE

S No Description Unit Qty Unit price DSR Amount

Providing and Fixing Logo & Signage in 3D ,as per the approved Design/ pattern with Mat

M.R /Gloss Finish Brass Letters with Mettalic/ Acrylic Base, complete as required at site with sq inch 4500 22 99000

the direction of the Enginner In Charge

Digitally signed by AMIT

Sno. Item Specifications Rate Qty Amount

Supplying and placing in position of main table Size 1650 mm (L) 750mm (W) X 750mm (H)

with Side unit of overall size: 1000mm(L) x 400mm(D) x 675mm(H) & Back Storage

2400X400X675 mm as per photograph/drawing .The table shall be made out of 36mm thick

pre -laminated particle board of approved shade. The working and non working edges shall

BO Incharge be finished with machine pressed with 2mm PVC egdge banding. The table top shall be

Table supported with MS powder coated "C" shape leg of size 50mm x 50mm with connectors of

size 40mm x 40mm. The front modesty are made out of 18mm thick prelaminated particle

board with 2mm thk pvc edge banding. The table shall be provisioned with Side unit of

overall size: 1000mm(L) x 450mm(D) x 675mm(H) . Side storage having a provision for three

equal drawer unit and two openable shutter & one open

Supplying and placing in position of 360 degrees revolving high back chair . The chair of

Size :-(W)590mm X (D)505mm X (H)1180mm - 1280mm. The chair shall be ergonomically

design contour lumbar back design made of 12mm thick BWR plywood (IS Grade - 303 for

seat and back) upholstered with leatheritte and cut foam. The chrome plated loop armrest

with padded upholstery is provided for extra comfort. The chair shall be provided with

pneumatic height adjustment which shall have stroke of 10.0 +/- 0.3 cm . Five star chrome

base with nylon castors . Chair seat has foam of density 30- 35 (+/ 2kg /m3) Dimensions The

backrest has a foam of 28kg/m3.

Supplying and placing in position of medium back cantilever chair of size: (W)610mm X

(D)505mm X (H)990mm.A contemporary design with an all black finish, . Material &

BO Incharge subtype:Premium Leatherette, Colour & Colour Family:Black, Dimension(W)610mm X

3 Visitor Back (D)505mm X (H)990mm, Back Type:Cantilever, Base:Cantilever Frame, Base Type:Cantilever, 13,175 3.00 39525

Chair Maximum Seating Height:19".The Seat & back are made up of 12mm thk hot pressed

plywood upholstered with PVC with polyurethane foam, chair seat has foam of density 32-

35 kg/m3. The backrest has a foam of 28kg/m3.

Digitally signed by AMIT

Sno. Item Specifications Rate Qty Amount

Supplying, and placing in position of sofa with premium Leatherette upholstery adds class

to the soft cushioned backrest and seating. Material & subtype:Premium Leatherette,

Colour & Colour Family:as per requirement, Seating Height:16.14"

,Legs:Stainless Steel, Finish:Matte, Size:Compact, Style:Modern, Texture:Two Tone. steam

4 3 seater sofa beech solid wood have used for framing construction of sofa .The seat cushion is made of 35,700 2.00 71400

multi layered foam of density 32-35 kg/m3. The seating cushion have 2.75 & 1.75 inches of

elastic webbing. The thread used is nylon bonded to provide lasting stitch strength . The

backrest has a foam of 28kg/m3 with polyster polyfill outer layer of 200 gsm. 2 seater

Dimension(L)1390mm X (D)750mm X (H)710mm

Supplying, and placing in position of sofa with premium Leatherette upholstery adds class

to the soft cushioned backrest and seating. Material & subtype:Premium Leatherette,

Colour & Colour Family:as per requirement, Seating Height:16.14"

,Legs:Stainless Steel, Finish:Matte, Size:Compact, Style:Modern, Texture:Two Tone. steam

5 2 seater sofa beech solid wood have used for framing construction of sofa .The seat cushion is made of 29,325 2.00 58650

multi layered foam of density 32-35 kg/m3. The seating cushion have 2.75 & 1.75 inches of

elastic webbing. The thread used is nylon bonded to provide lasting stitch strength . The

backrest has a foam of 28kg/m3 with polyster polyfill outer layer of 200 gsm. 2 seater

Dimension(L)1390mm X (D)750mm X (H)710mm

Supplying and placing in position of main table as per photograph/drawing .The table shall

be made out of 36mm thick pre -laminated particle board of approved shade. The working

and non working edges shall be finished with machine pressed with 2mm PVC egdge

banding. The table top shall be supported with MS powder coated "C" shape leg of size

50mm x 50mm with connectors of size 40mm x 40mm. The front modesty are made out of

18mm thick prelaminated particle board with 2mm thk pvc edge banding. The table shall

6 AGM Table be Back Storage size: 900mm(L) x 400mm(D) x 675mm(H) . Side storage having a provision 48,025 2.00 96050

for three equal drawer unit and two openable shutter & one open storage with shelf in it.

The Side unit top shall be made out of 18mm thick pre laminated particle board and rest all

storage to be made out of 18mm thick pre laminated particle board. Provision of Junction

box, wire raceway and 6 module fliptop box for wire passing or as per site requirement.

Main Table Dimension (L)1500mm X (D) 900mm X (H)750mm overall Side Runer Dimension

Digitally signed by AMIT

Sno. Item Specifications Rate Qty Amount

Supplying and placing in position of main table as per photograph/drawing .The table shall

be made out of 25mm thick pre -laminated particle board of approved shade. The working

and non working edges shall be finished with machine pressed with 2mm PVC egdge

banding. The table top shall be supported with MS powder coated "C" shape leg of size

50mm x 50mm with connectors of size 40mm x 40mm. The front modesty are made out of

OFFICER 18mm thick prelaminated particle board with 2mm thk pvc edge banding. TSide storage

Table having a provision for three equal drawer unit and two openable shutter & one open

storage with shelf in it. The Side unit top shall be made out of 18mm thick pre laminated

particle board and rest all storage to be made out of 18mm thick pre laminated particle

board. Provision of Junction box, wire raceway and 6 module fliptop box for wire passing or

as per site requirement. Main Table Dimension (L)1500mm X (D) 600mm X (H)750mm overall

Side Runer Dimension (L)1000mm X (D) 450mm X (H) 675mm

Supplying and placing in position of 360 degrees revolving high back chair of size: 660mm

(L) x 490mm(D) x 1315mm(H). The seat cushion to be upholstered on 10-12mm thick water

proof plywood and moulded foam. The seat to be made with 12 mm thick hot pressed BWR

plywood (IS grade - 303) upholsetered with Polyurethane foam and mesh fabric over it. The

chair shall be provided with self tension single locking mechanism and pneumatic height

8 OFFICER Back 14,875 4.00 59500

adjustment which shall have stroke of 10.0 +/- 0.3 cm .The black .The pneumatic height

adjustment shall have adjustment stroke of 100 mm and shall be operated at 30kgs

extension force.The Seat & back are made up of 12mm thk hot pressed plywood

upholstered with PVC with polyurethane foam, chair seat has foam of density 32-35 kg/m3.

The backrest has a foam of 28kg/m3. adjustable arm rest and head rest

Supplying and placing in position of 360 degrees revolving medium back chair . The Craze

chair of Size :-(W)590mm X (D)505mm X (H)1005mm - 1115mm. The chair shall be

ergonomically design contour lumbar back design made of 12mm thick BWR plywood (IS

9 Grade - 303 for seat and back) upholstered with leatheritte and cut foam. The chair shall be 12,325 21.00 258825

provided with pneumatic height adjustment which shall have stroke of 10.0 +/- 0.3 cm . Five

star chrome base with nylon castors . Chair seat has foam of density 30-35 (+/- 2kg /m3) The

backrest has a foam of 28kg/m3.

Digitally signed by AMIT

Sno. Item Specifications Rate Qty Amount

Dimension: 1200mm(L) X 600mm(D) x 1050mm(H) Supplying, and placing in position of linear

workstation as per Image.The worktop made out of 25mm thk. Prelam Particle board with 2

mm thk PVC edge banding.The Table top supported on Mild Steel of size 50mm x50mm

Slanted Leg and 50mm x 25mm Horizontal connectors with Powder coting of 50

Micron.Middle Leg :- 0.8 mm thk Metal panel fixed on both side of the "T" leg for Vertical wire

carrying purpose.(Sharing Workstation). 0.8 mm thk Single/Double metal powder coated

raceway with Powder coting of 50 Micron below top for wiring.Vertical wire carrying pole

10 with powder coating 50 micron below top for wiring( Non- sharing workstation ). Also having 19,253 6.00 115515

a provision of ms perfoated sheet hanging modesty. provision of glass divider rest on the "D"

brackets on the table top between opposite seatings. All working or non working edges

shall be provided with machine pressed 2mm thick PVC edging using special hot melt glue

at hot temperature. Provision of pullout PVC keyboard tray and CPU trolley for each

seating. Also a provision of Pedestal Unit (size:- L-400mm x D-450mm x H-600mm) with a

combination of 2 drawer & one filing drawer. The pedestal storage unit shall be made of 18

mm thick prelaminated Particle board with provision of handles & Locking arrangement

Supply and Placing of Reception Table, made from pre-laminated particle board with

Reception laminate finish. Includes drawers, keyboard tray, modesty panel, and cable management.

Table All hardware fittings (handles, channels, locks) included. Finish and design as approved by

Engineer-in-Charge. Complete in all respects as per approved design.

Pantry Lunch Providing & Installation of Pantry table of size 1.8m x 0.75m x 1.05m (ht) made out of 19mm

Table thk. Commercial Board finished in Laminte.

13 Pantry chairs Providing & Installation of Pantry chairs of required dimension and as per instruction of EIC 2,083 2.00 4,165.00

14 TABLE CENTRE TABLE WITH GLASS TOP 8,925.00 2.00 17,850.00

15 SIDE Table Side Table 6,800.00 3.00 20,400.00

Digitally signed by AMIT

Sno. Item Specifications Rate Qty Amount

Meeting Table for 5 Persons, comprising:

– Table Top: Made of 25mm thick prelaminated particle board of approved shade,

Meating conforming to E1 norms. All edges to have machine-pressed 2mm thick imported PVC

Table lipping fixed with hotmelt EVA glue, free from VOC.

– Gable End and Modesty Panel: Made of 18mm thick prelaminated particle board of

matching approved shade, with similar 2mm PVC edge banding.

Pantry Under Counter Storage, made with HDHMR board finished with laminate on all

exposed surfaces. Unit depth: 600mm. All edges shall be finished with matching edge

banding. Includes shutters, shelves, hardware (hinges, handles), and necessary fittings

complete in all respects.

Pantry Overhead Storage Unit, made from prelaminated particle board of approved shade

and grade conforming to E1 norms, with unit depth of 450mm. All exposed edges finished

with 2mm PVC edge banding using hotmelt EVA glue. Includes shutters, shelves, and

necessary hardware and fittings, complete in all respects.

The storage top 25 mm thick, shutter and side panels are made of 18mm thick and back

Openable panel is made of 09mm thick MDF of approved shade. All the edges of storage surface shall

19 Shutter be provided with machine pressed imported PVC lipping glued with hot melt EVA glue free

storage from any VOC with free groove handle and suitable lock. All exposed area PVC edge

Total Amount 1090248.25

Total Amount 1090248.25

Digitally signed by AMIT