11HMTC/2019-20

Amount

Removing the old paint from steel and other metal surfaes and making the surface even and Applying one coat of Red oxide primer of approved quality including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and scoured with wire brushes, fine steel wool, scrapers and sand paper, cost of red oxide primer, brushes, etc., complete complying with AISS and as directed by the departmental officers.

Painting the steel surfaces with Two coats of Bituminous Anticorrosive paint of approved quality (excluding priming coat) on previously painted steel and other metal surfaces with ready mixed Anticorrosive paint, brushing, black to give an even shade including cleaning the surface of all dirt, dust and other foreign matter including all materials, labour, brushes, etc., complete complying with AISS and as directed by the departmental officers.

Painting the steel surfaces with Two coats of Synthetic enamal paint of approved quality (excluding priming coat) on new steel and other metal surfaces with enamel paint, brushing, interior to give an even shade including cleaning the surface of all dirt, dust and other foreign matter including all materials, labour, brushes, etc., complete complying with AISS and as directed by the departmental officers.

Supplying the structural steel, MS Angles, Channels, Flats etc., for vertical members / bracing /stiffeners / Base plates or for any other usage as a structural member, fabricating, welding and erecting the frame work in position at the locations shownin the drawing including all labour, materials, conveyance, tools & plants, etc., complete and as directed by the departmental officers (Note : 1. While fabricating, necessary holes and bolt & nut shall be provided at no extra cost in the structural members. 2. In case, the specified MS section is not available in the market, the nearest alternative section may be used after approval of the Engineer.

Applying TWO coat of Exterior (APEX) of approved quality over the existing wall surface in all floors to give an even shade after thoroughly brushing the surface clean of all grease, dirt, loose pieces of scales and also including preparing the surface even and sand paperes smooth including all materials, labour, brushes, scaffolding, etc., complete complying with AISS and as directed by the departmental officers.

Supplying and fixing of G.I. Barbed wire 10 gauge (6Rm. / Kg.) two ply three points confirming to I.S. Code No. 278 -1962 Type - I, straining and fixing to any type of standard rails, straining bolts including securing with and provision of galvanised mild steel wire, stapples or steel pins etc., for horizontal and tying with the fencing / M.S angle post using G.I steel wire including all materials, labour, tools etc., complete complying with AISS and as directed by the departmental officers.

thangaraj