REPAIR/MAINT OF ROOF SHEETS/ FALSE CEILING AND MISC ITEMS IN POCKET 9 IN SAHARANPUR UNDER GE ROORKEE

Amount

S&F Prepainted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified including Dismantling asbestos cement (corrugated, semi corrugated etc) sheets in roof covering complete as specified and directed by Engr-in-Charge

S&F Prepainted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified including Dismantling asbestos cement (corrugated, semi corrugated etc) sheets in roof covering complete as specified and directed by Engr-in-Charge

Dismantling timber fillets, posts, Rafter, purlins etc. under 40 sq cm in section complete as specified and directed by Engr-in-Charge

S&F roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.

Taking down asbestos (corrugated, semi corrugated etc) sheets in roof covering

M&L 6mm thick asbestos cement, corrugated or semi corrugated sheets in roofs, walls etc fixed with L-type or J-type or cranked hookbolts complete all as specified and as directed.

M&L 6 mm thick two piece AC serrated Ridges for corrugated sheet with 'L' or 'J' hook carnked bolts complete all as specified and as directed.

M&L 0.63 mm thick Plain, galvanised, mild steel sheeting, in ridge, hips, valley gutters, drip and straight flashings (length and grill as foxed) with grade of zinc coating 275 complet all as specified and as directed.

M&L for brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radious built in CM 1:6 etc incl Demolition of brick work or stone/boulder masonry, built in cement mortar or cement lime mortar incl all quoins, arches, pillars etc but excluding ashlar facings dressed stone work and precast concrete articles etc complete all as specified and directed

M&L for Providing and fixing tiled false ceiling of designer tiles(high pressure steam Cured) of 10mm thickness (as per IS:14862) of size 595x595mm and any one of the design ( Cascade or Electra or equivalent) in true horizontal level, suspended on inner locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grms, both side inclusive and black painted groove on all T webs) consisting of main “T” runner with suitably spaced joints to get required length and 15x32mm made from 0.3mm thick sheet, 1200mm long spaced between main “T” at 600mm C/C to form a grid of 1200x600mm and secondly cross “T” of length 600mm and size 15x32mm made of 0.30mm thick sheet to be interlocked at middle of 1200x600mm panel to form grids of 600x600mm and wall angle 15x20x0.36mm and laying false ceiling tiles in the grid including, required cutting / making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main “T” runners to be suspended from ceiling using GI soffit cleats fixed to existing RCC lintel with dash fasteners, GI adjustable rods of 3mm dia with galvanized butterfly level clips, spaced at 1200mm c/c along main “T”, bottom exposed width of 15mm of all “T” sections shall be pre-painted with polyester paint and black painted groove at center of size 4mm depth and 4.5 mm width, and Dismantling wall and ceiling board (fibre, pulp , insulation etc) or insulation boards/ slabs any thickness all complete at all heights as per directions of EIC.

M&L for rendering 15 mm thick in CM (1:6) on brick or concrete surfaces finished even and fair without using extra cement complete all as specified and directed.

M&L for rendering 15 mm thick in CM (1:6) on brick or concrete surfaces other than fair face of brick work without using extra cement complete all as specified and directed.

M&L for preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide paint

M & L for new plastered surface on walls and applying two coats cement based paint over one coat of alkali resistant priming paint complete.( Make : Snowsem/Durocem/Crimocem)

M & L for preparation of newly plastered surface of wall and applying two coats of oil bound distemper over 1 mm thick wall care putty complete all as specified & directed.

M&L cement concrete TypeB0 1:2:4 (12.5mm graded) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, including demolition of Concrete in ground floors and pavings n exc 15 cm in thickness (Below or above the ground Level) as directed

M & L for preparation of new wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer all as specified

M&L second class hard wood clean sawn in scantling complete all as specified & directed.

AMAR NATH SHARMA

VINAYAK CONSTRUCTION COMPANY

JBN CONSTRUCTION

G.H. INFRASTRUCTURE PRIVATE LIMITED

MOHAN LAL GUPTA

Anmol Associates

SUSHIL KUMAR

Shikha Enterprises

ANKIT KUMAR

MUNESH KUMAR TYAGI