Installation of 7.5 Cusec Vertical Turbine Pumping Unit with allied Mechanical and Electrical works for Augmentation of LIS Kreshibal.

Select, Excess (+), Less (-) Less (-)

Tender Inviting Authority: Executive Engineer, Mechanical Irrigation Division Srinagar.

Name of Work: Installation of 7.5 Cusec Vertical Turbine Pumping Unit with allied Mechanical and Electrical works for Augmentation of LIS Kreshibal. ----- Est. Rs.23,49,800

Contract No: eNIT- 27

Name of the Bidder/ Bidding Firm / Company :

Sl. No. Item Description Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT TOTAL AMOUNT TOTAL AMOUNT In Words

1 Design, manufacture, supply, installation, testing and commissioning including pre-dispatch 3rd party inspection of 7.5 cusec capacity Vertical Turbine pump with 12-meter dynamic head coupled with 60 HP(Minimum) vertical Sq. Cage induction motor for Lift Irrigation scheme Kreshibal, complete as per IS 1710 As per Appendix "B" 1 1 Job 0 Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

2 Providing, fitting, installation, testing and commissioning of 150 KVA voltage controller/stabilizer as per specifications below: Type of voltage controller: Manually operated copper wound, 3-phase, AC power supply multi step. Type of Regulator : Double plate type with electrolytic copper contacts. Input voltage : 180-400 volts. Output voltage : 400 + 10% volts. Frequency : 50+ 3 C/S. Windings : Electrolytic grade copper of adequate section, vacuum impregnated and Oven-dried. Insulation : Fiber glass insulations to tested parameters. Efficiency : 98 % Cooling : Naturally, Oil cooled Temp. Rise (Max) : 30°C above ambient Mounting : On Uni-directional wheels. Correction rate : 30 volts per step Wave form distortion : virtually nil Duty cycle : 100% continuous. Enclosure : MS sheet enclosure in pressed CGR Sheet powder coated with radiators. Core laminates : High grade, low eddy loss, grain oriented silicon steel laminations. As per Appendix "B" 3 1 Job 0 Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

3 Providing and fitting of 70 sqmm XLPE insulated, 1100V single core armoured industrial copper cable as under (Preferred make: Finolex/ Gloster/ Havells/ KEI/ Polycab). The cable is required to be laid in Three lines from motor to Starter and starter to Voltage stabilizer and stabilizer to MCCB along with required size copper thimbles. Additionally three lines for ML 3 starters to motor alongwith thimbles 4 100 Mtr 0 Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

4 Providing, Installation Testing and Commissioning at site 100 HP capacity Auto Transformer Starter. The starter shall comprise of the following equipment and accessories. a) Main Contactor Assembly of L&T/Siemens/Schnieder make having capacity of 250 Amp. b) Delta Contactor Assembly of L&T/Siemens/Schnieder make having a capacity of 200 Amp. c) Auto Transformer contactor Assembly of L&T/ Siemens/Schnieder having a range of 100-125 Amp. d) Thermal overload Relay of MN series of required Capacity of L&T makes. e) Double vacuum timer assembly having time range of 0-60/sec. Barat Batlar Hamar or Equivalent make. f) Single phase preventer of L&T/Minilac make for above capacity starter. g) Auxiliary fuse units of suitable Ampere range. h) Electrolytic Copper bus bar strips of suitable size of duly tinned air insulated mounted on suitable size backlit insulators. i) Three No. Current transformer coils of suitable range of L&T/AE make fitted in each bus bar strips connected to 96mmx96mm square flush type Amp Meter of AE/L&T make fitted on the door of the Panel housing. Each phase shall indicate the Amp range by having one number selector actuator Switch fitted. j) One number voltmeter of AE/L&T make 0-500 volts with one selector suitable for cut showing voltage in each phase. As per Appendix "B" 5 1 Job 0 Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

5 Providing, fitting, testing and commissioning of ML3 FASD Starters (For Pumping Unit-1 & pumping Unit -2) having following specifications at LIS Kreshibal Type/ Rating: ML-3. Make: L&T Relay Range: 28-42 A. Motor Rating: AC3-Phase, 415 + 15% V, 50 + 3% HZ. Relay: ML 2/3 Conformance to Standards IS/IEC 60947-4-1, IEC 60947-4-1 Degree of protection: IP 54 The Starter shall have all three modes of operation like Auto, Manual and Bypass and the starter shall have protections like single phase preventer, phase imbalance, reverse protection, overload etc. The starter is to be provided with Under/Over Voltage Protection relay/system with Adjustable Over and Under voltage trip level of L&T/Minilec/GIC Make along with wiring as per site requirement. The job is inclusive of providing and Fitting of the starter as per site requirement along with nuts, bolts & washers, which further includes minor wiring i.e. connecting of main incoming and outgoing connections with copper wire duly crimped with copper thimbles as per site requirement and finally testing of the starter on full load at site. 6 2 Job 0 Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

6 Providing and fitting of 3-pole 415V MCCB with thermal magnetic release having 50kA breaking capacity Ics = 100% Icu (Make: L&T d-sine or equivalent) Having max. of thermal release range as under: 250 Ampere. The job includes modification to the existing LT Control panel to accommodate the MCCB for additional unit in the space provided for auxiliary MCCB. This includes replacement of busbars with proper rating busbars convenient to handle 60 HP Load 7 1 Job 0 Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

Total in Figures 4 Construction of chamber for 100mm sluice plates item5 10 Nos

Quoted Rate in Figures Select

Quoted Rate in Words