SPECIAL REPAIR TO OTM BLDG NO P-268 PERS LINE OF FD HOSP UNDER GE (WEST) DELHI CANTT-10

Amount

Taking down chowkhats or frames with shutters (without taking off shutters from the frame) exceeding 1.5 Sqm but not exceeding 4 Sqm each complete all as specified and as directed.

All as per item No. 1.00 here-in above but not exceeding 1.5 Sqm each

S&F Factory made 35mm thick second class hard wood plain framed panelled door shutters (Minimum two panels) with lock rail and panels of 9mm thick BWP commercial ply or 12mm thick veneered particle board with commercial veneering on both faces. The sizes of rail and stiles as per IS:1003 ( Part I), kiln seasoned and chemically pressure treated and fixed in position complete all as specified and as directed.

S&F factory made 35mm thick 2nd class hard wood glazed / gauged shutters, open, rebated prepared to receive glass , guage etc W/O sash bars for doors as specified in SSR Part I complete all as specified and as directed.

S&F mild steel butt hinges 100mm size complete all as specified and as directed.

S&F aluminum anodized barrel tower bolts of extruded section of size 150 mm complete all as specified and as directed.

S&F aluminum handles cast type anodised of size 150 mm complete all as specified and as directed.

S&F aluminium alloy, anodised, sliding door bolt (length of bolt 300 mm) with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed.

M&L for preparting new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and as directed.

Excavation in trenches not exceeding 5 mtr wide and not exceeding 1.5 mtr depth for fdn etc for soft manhole not exceeding 1.00 sqm on plan and getting out any type of soil complete all as specified and as directed.

Returning filling in soft/loose soil incl spreading, leveling, watering and well ramming in layers not exceeding 25 cm complete all as specified and as directed.

Removing of surplus soil to exc 250 mtr but not exceeding 500 mtr and deposited where directed as a level not exceeding 1.5 mtr above the starting point complte all as specified.

Demolition and breaking of 150 mm dia sewage/drain pipe (salt glazed where AC or reinforced concrete) set in cement mortar complete all as specified and as directed.

M&L for PCC 1:3:6 type C-2 ,bed concrete to 150mm bore dia drain pipes (of 100mm thick) including packing under, and haunching against the sides of pipes after they are laid and tested complete all as specified and as directed.

M&L for 150mm bore Salt-glazed stoneware drain pipes laid in trenches and jointed complete all as specified and as directed.

M&L for 75mm thick SFRC manhole/drain cover any size set and jonted in cement mortar 1:4 complete all as specified and as directed.

M&L for powder coated Anodised aluminium frame for doors, windows, ventilators, grill, partitions, sliding tracks, aluminium section for shutters suitable for two/three/four track window and aluminium section sliding members incl all necessary fittings and fixtures, jointing cleats, rubber packing, sides silicons packings etc complete all as specified and as directed.

S&F powder coated aluminium window and ventilator shutters, side hung type with/ without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, powder coated aluminium snap beading, screws, powder coated aluminium fittings such as peg stays 150mm long (1 No), hinges type B-21, 100mm long (2 Nos) suitable handle (1 No) complete all as specified and as directed.

S & F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with meter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

S&F Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and as directed.

S&F SS butt hinges medium weight 100 mm size fixed with SS screws complete all as specified and as directed.

S&F for Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors/door frames; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed.

M&L for preparation of new steel surfaces of any description over 10cm in width or girth not otherwise described and applying two coats of syntethic enamel paint over one coat of red oxide Zink chrome complete all as specified and as directed.

S&F Stainless steel wire cloth.0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.

M&L for 18-20mm thick, granite (of any type) work (table rubbed and polished) in window-cills, cooking platforms, WHB platerform and like in 15mm thick cement mortar (1:6) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.

M&L for PCC 1:2:4 type B1 using 20mm graded stone aggregate as in coping, bed plates, kerbs including weathering slightly rounded or chamfered and throating complete complete all as specified and as directed.

Demolition of brickwork or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed.

M&L for brick work in cement morta 1:6 using sub class B bricks, straight or curved on plan exc 6mtr mean radius complete all as specified and as directed.

M&L for Brick work with old size sub class B brick straight or curved on plan to any radius in half brick thick wall built in cement mortar 1:4 etc complete all as specified and as directed.

Dismantling floor, hearth or wall tiling or kota stone including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M&L for 25mm thick PCC 1:2:4 type B0 using 12.50mm graded stone aggregate as in levelling couse of sub base all as specified and directed.

M&L for Glazed Ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:6 complete all as specified and as directed.

M&L for Non - skid Ceramic coloured tiles 7-8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.16 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:6 complete all as specified and as directed.

M&L for Glazed ceramic coloured tiles in vertical surface 300x450x7 thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick backing in CM 1:4 complete all as specified and as directed.

M&L for 75mm thick PCC 1:3:6 type C-2 (40mm graded agg) for plinth protection laid in bays and finished even and fair incl filling the joint with bitumen mastic including dismenteling of plinth protection complete all as specified and directed .

Dismantling Brick tiles or terracing tiles, single layer on roofs including thatching any type, mud phuska etc including cleaning the surface by water/air pressure and removal of debrish beyond MOD land complete all as specified and directed

M&L for brushing neat cement slurry with 3.Kg of cement per sqm complete all as specified and directed

M&L for cement concrete 1:2:4 type B1 using 20mm graded stone aggregate as in roof padding/kerb, mud slopes, rounded or chamfered edge complete all as specified and directed

M&L for rendering 10mm thick cement mortar 1:4 on fair face of brick work or concrete surface complete all as specified and as directed.

M&L for water proofing treatment to roof surface with APP water proofing membrane 3mm thick & weighing not less than 3.0 kg/sqm of approved make black finish & reinforced with non woven polyester matt of min 150 gm/sqm laid over a coat of bitumen primer conforming to IS-3384 @ 0.4 Ltr/sqm over prepared roof surfaces, forcing overlap with a propane or a butane gas torch with a overlap of 75mm at sides & 100mm at ends & sealing as per manufacturer's instructions complete all as specified and as directed. Note:- 1. Water proofing treatment shall be got carried out by the manufacturer or their authorised applicator only. 2. Bitumen primer, bitumen and membrane shall be of same make/manufacturer.

M&L for cutting groove in brick wall 75mm wide and 65mm deep and shaping horiaontal face of groove with cement Mortar 1:3 for fixing of APP membrane and filling the groove with PCC 1:2:4 type B0 using 12.5mm graded stoen aggregate after inserting membrane complete all as specified and as directed.

Supply and fixing Heat Resistant Terrace Tiles (300 mm x 300 mm x 20 mm) with SRI (solar refractive index) > 78, solar reflection > 0.70 and initial emittance > 0.75 on waterproof and sloped surface of terrace, laid on 20 mm thick cement sand mortar in the ratio of 1:4 (1 cement : 4 coarse sand) and grouting the joints with mix of white cement & marble powder in ratio of 1:1, including rubbing and polishing of the surface upto 3 cuts complete, including providing skirting upto 150 mm height along the parapet walls in the same manner complete all as specified and directed

S&F 1000 Ltr rotational moulded polyethylene water storage tanks cylindrical vertical with closed top) hoisted and fixed in position including necessary fittings after dismantling of old tank all as specified and directed.

Taking up or down 15mm bore dia steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed.

Taking up or down 20mm bore dia steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed.

S&F in repair 20mm ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed.complete all as specified and as directed.

M&L 20mm CPVC pipes SDR 11 with all plain CPVC SDR 11 and brass threated fittings (like elbow, Tee, MTA/BTA Adeptor,tank adeptor etc. ) CPVC fittings and fixed complete to walls, ceiling or laid in floor complete all as specified and as directed.

M&L 25mm CPVC pipes SDR 11 with all plain CPVC SDR 11 and brass threated fittings (like elbow, Tee, MTA/BTA Adeptor,tank adeptor etc. ) CPVC fittings and fixed complete to walls, ceiling or laid in floor complete all as specified and as directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and as directed.`

M&L for Ready Mix plaster 15mm thick on brick or concrete surface of walls finished even and fair surface without using extra cement complete all as specified and as directed.

M & L Rendering 5mm thick in ready mix on ceiling to be finished even and fair (without using extra lime or cement) as in patch works or whole work including taking down cement plaster complete all as specified and as directed..

M&L for washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 marble stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings including providing necessary groove for required size of panel, including taking down cement plaster/grit plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. including providing necessary scafolding for work upto 4 storey bldg complete all as specified and as directed.

M&L for machine cut polished Machine cut Kota stone 20-25mm thick as in floor, tread, riser, pillar fixed with neat cement slurry over and including backing coat of 20mm thick in CM (1:4) including rubbing and polishing to mirror finish complete all as specified.

S&F in repair 100mm bore cast iron soil waste and vent pipe (Cast type) in any length with or without ears with lead joints fixed to walls or laid in floor etc including dismentiling old CI pipe complete all as specified and as directed.

S&F in repair 100mm Bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and directed

S&F in repair for 100mm bore dia cast iron Branch pieces,double (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and as directed.

S&F in repair 75mm bore cast iron soil waste and vent pipe (Cast type) in any length with or without ears with lead joints fixed to walls or laid in floor etc including dismentiling old CI pipe complete all as specified and as directed.

S&F in repair 75mm Bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and directed

S&F in repair for 75mm bore dia cast iron Branch pieces,double (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and as directed.

M&L for 110mm bore PVC (SWR) pipe conforming to relevant IS single socketed in any length with rubber ring joint and fixed to wallor floor complete incl taking down old rain water pipes

S&F 110mm bore PVC (SWR) bends any radius all as specified and direction

S&F in repair Chromium plated brass long body bib tap fancy type 15 mm bore dia complete all as specified and as directed.

S&F in repair 15mm bore angle valves, fancy type, cast copper alloy, chromium plated, screwed down high pressure with crutch or butterfly handle, complete all as specified and as directed.

S&F in repair cast copper alloy, chromium plated Health faucet body with 1mtr ABS body pipe complete all as specified and as directed.

S&F Grating doom 100mm dia of SS (Minimum weight 25gms) complete all as specified and as directed.

S&F Grating doom 125 mm dia with waste hole of SS. (Minimum weight 40gms) complete all as specified and as directed.

S&F in repair PVC connection 15mm size with PTMT nuts complete length 600mm complete all as specified and as directed.

S&F in repair flexible PVC waste pipe with coupler complete 900mm length complete all as specified and as directed.

S&F in repair CP over head shower rose 125 mm dia with arm moving arrangement complete all as specified and as directed.

S&F in repair 10 ltrs capacity PVC low level flushing cistern complete with syphone handle lever PVC bend including connecting to WC and fixing on walls with bracket complete all as specified and as directed.

S&F in repair in repair fanct type brass chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and as directed.

S/F in repair viterous china squatting pan 'ORISSA Pattern' size 580x440mm white with integral foot rests incl P or S Trap) (excluding flushing cistern & flush pipe) including connecting to trap and to flushing pipe, anti syphonage pipe etc complete including making good to surface complete all as specified and as directed.

S&F in repair vitreous china white wash hand basin oval shape under counter complete all as specified and as directed.

S&F in repair vitreous China wash down water closet pan (pedestal pattern) incl P or S Trap of cast iron , white and connection with cistern complete all as specified and as directed.

S&F in repair Vitreous China urinals, Half stall type (back or corner wall type), white, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing brackets, flush pipe, grating and Union for discharge pipe and waste pipe complete all as specified and as directed. by Engr-in-Charge.

M&L for Marble work table rubbed and polished bothe face for urinal partition /wall lining (veneering to wall) 25mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade complete all as specified and as directed.

S&F plastic water closet seat cover, white closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device of approved colour and as per existing model complete all as specified and as directed.

S & F in repairs for 15 mm bore brass CP wash hand basin mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified.

S&F CP wall mixer telephonic type for mixing hot and cold water for shower screwed down for 15 mm brass iron pipe of ferrule of complete all as specified.

S&F in repair chromium plated stanless steel curtain rod 25mm bore fixed with fixing brackets, stops, rollers etc complete all as specified and as directed.

S&F for drapery rod's side bulb stainless steel chromium plated suitable for 25mm bore curtain rod complete all as specified and as directed.

S&F in repair coated MS drapery rod's brackets as required complete all as specified and directed complete all as specified and as directed.

M&L for complete removal of existing treatment of painting by scraping, brusing, wahing down to open the brick or concrete original surface in walls or to bricks on edge in floors, surface channels, roofs, etc complete all as specified and as directed.

M&L for providing not exceeding 1mm thick wall care putty on wall surface interior grade complete all as specified and as directed.

M&L preparation old plastered surfaces of ceiling and applying one coats of white wash all as specified and directed.

M & L for two coats of distempering on walls with distemper oil emulsion, white or tinted over a coat of primer complete all as specified and as directed.

M&L for Preparation of new surfaces (Plastered or un-plastered) of walls and applying three coats of white lime wash, complete all as specified and as directed.

M&L preparation of newly plastered surfaces and applying two coat of white wash on ceiling surface complete all as specified and as directed.

M&L for providing PMM (Polymer modified cementitious mortar ) :-(i) Dry sub strate surface and free of debris & dust (ii) Applying Epoxy bond coat on the sound substrate using approved spray machine & ensuring that no pin holes are visible.(In case pin holes are still visible after a coat, a second coat shall be applied to ensure absence of pin holes) (iii) Immediately after application of epoxy bond coat as above apply PMM (Polymer modified cementitious mortar) of 25 mm thickness. Note: Application of PMM shall be preferably be in coats of appx 10mm thickness. PMM work shall be executed in fairely rapid successions so as entire work is completed with in 30 mins). PMM shall be pre packed ready to use.(iv) PMM surface to be moist cured for three days followed by air curing in temperature as recommended by manufactuer complete all as specified and directed

Surface excavation not exceeding 30cm deep and averaging 15cm deep including getting out in hard/dense soil complete all as specificed and as directed.

M&L for 100mm thick PCC 1:4:8 type D2 using 40mm graded stone aggregate as in sub base flooring complete all as specified and as directed.

M&L Machine pressed precast concrete interlocking glossy paver block any sahpe and size confirming to IS15658-2006 of 60mm thickness, M-35 grade set and jointed with white cement and pigment including 30mm thick sand cushion complete all as specified and as directed.

S&F pre cast concrete block for kerb stone with solid block ex 10cm in width type C1, 1:3:6 (using 20mm graded stone aggregate) set in CM 1:6 of any shape and size. Kerb stone shall be fixed in true line and level or incurves for edging of road side path including embedding in ground to any depth as reqd.

M&L for solid WPC (Wood Polimer Composite) sheet 18mm thick (water proof and termite proof) prelaminated one side with decorative choice colour and other side balancing white as in cup board shutter. The sheet shall be finished all edges with 0.5mm beading/ lipping of same lamination pvc sheet pasting or bonding tape etc complete all as per manufacture's instruction, specification and as directed.

S&F false ceiling with powder coated GI grid of size 600x600 mm using main Tee of size 24x28x0.40mm prepunched to accept cross tee of size 24x28x0.40mm and wall angles of size 25x25x0.40mm fixed with wall around of size with and including 4mm thick fiber cement board white colour designer tiles as approved by GE of size 595x595 mm placed in the grid and held in position duly suspended by 4mm dia GI wire hanger from the roof with holding down clips, butter fly clips and necessary provision for light fixture etc complete as per manufacturers instructions including dismentiling old false ceiling board any type complete all as specified and as directed.

Taking down carefully copper/aluminium any type of point wiring (light/fan/socket /power) complete (fittings such as switches, ceiling roses, holders, sockets, regulators light fittings) and making good the disturbed surfaces of wall/floors/ceiling etc) complete all as specified and as directed.

M&L for concealed point wiring with PVC insulated multi stranded sheathed colour code copper conductor in PVC conduit with FRLS cable 1.5 sqmm size, 1100 volts grade in new GI boxes of suitable thickness including one coat of synthetic enamel black paint and providing new plastic laminated sheet cover of required colour fixed with brass screws and cup washers including single core stranded FRLS copper conductor 1.5 sqmm PVC insulated unsheathed cable as earth wire to common earth and connected to earth dolly and earth terminal box drawn in same concealed conduit complete all as specified and as directed for cost of chiseling cutting of existing surface and making food to match with existing surface shall be deemed to be included in quoted rates.

One light/fan/bell point controlled by one way switch 5 amps.

One 3 pin 5 Amps socket outlet point controlled by one way switch on independent board.

One 3 pin 5 Amps socket outlet point controlled by one way switch on same board.

M&L for concealed point wiring with PVC insulated multi stranded unsheathed FRLS copper conductor in PVC conduit with cable 2.5 sqmm size, 1100 volts grade in new GI boxes of suitable thickness including one coat of synthetic enamel black paint and providing new plastic laminated sheet cover of required colour fixed with brass screws and cup washers including single core stranded FRLS copper conductor 2.5 sqmm PVC insulated unsheathed cable as earth wire to common earth and connected to earth dolly and earth terminal box drawn in same concealed conduit for one 3 pin socket 15 A independent board complete all as specified. Note :- Cost of chiseling cutting of existing surface and making food to match with existing surface shall be deemed to be included in quoted rates.

S&F in repair switch piano flush type 6 amps single pole one way complete all as specified and as directed.

S&F in repair switch piano flush type 16 amps single pole one way complete all as specified and as directed.

S&F in repair socket outlet 2 in 1, 3 pin 6 amps complete all as specified and as directed.

S&F of socket outlet multipurpose 2 in 1, 6 and 16 Amps complete all as specified and as directed.

Supply, laying and drawing submain wiring in and including 20 mm dia concealed PVC rigid conduits including cutting of chases for laying conduit making good the surfaces as per existing surfaces or as directed on walls 02 runs of IC x 10.00 sqmm (Main Cable and neutral) and one run of IC x 10.0 sqmm (as earth wire) of multistranded copper conductor PVC insulated unsheathed cables of 1100 volts grade complete including connection complete all as specified and as directed.

Supply, laying and drawing submain wiring in and including 20 mm dia concealed PVC rigid conduits including cutting of chases for laying conduit making good the surfaces as per existing surfaces or as directed on walls 02 runs of IC x 6.00 sqmm (Main Cable and neutral) and one run of IC x 6.0 sqmm (as earth wire) of multistranded copper conductor PVC insulated unsheathed cables of 1100 volts grade complete including connection complete all as specified and as directed.

Taking down ceiling fan, sealing cable end, dismantling blades and removing fan and blades and deposit to MES storeyard, complete all as specified and as directed.

Supply, Installation, testing and commissioning of 1200mm sweep BEE 5 star rated, Ceiling fan with Brush Less Direct Current (BLDC) Motor, Class of insulation : B, power factor not less than 0.9, service value (CMM/W) minimum 6.85, not less than 350 RPM (tolerance as per IS:374-2019), THD less than 10%, including electronic regulator unit for speed control and all remaining accessories including safety pin, nuts bolts, washers, temperature rise =75 degree C (maximum), insulation resistance more than 2 mega Ohm, suitable for 230V, 50 Hz, single phase AC supply complete all as specified and as directed.

S&F of factory made epoxy polyester powder coated distribution board SP & N 12 way fabricated from minimum 1.6 mm thick CRCA sheet with metal double door (IP-43 protection ) fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, Neutral bar, standard DIN rail, eath bar and cable ties for cable management, top and bottom removable gland plates with knockouts, complete all as specified and as directed. NOTE (a) MCBs shall be measured and paid separately. (b) All cables terminating into MCBs shall be connected by using suitable copper lugs/thimbles/sleeves and its cost shall be deemed to be included under respective item of Sch.

S&F of factory made epoxy polyester powder coated distribution board SP & N 8 way fabricated from minimum 1.6 mm thick CRCA sheet with metal double door (IP-54 protection ) fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, Neutral bar, standard DIN rail, eath bar and cable ties for cable management, top and bottom removable gland plates with knockouts and suitable for one DP MCB as incomer and 6 SP MCBs as outgoings complete all as specified and conforming to IS: 8623, all as specified and as directed. NOTE (a) MCBs shall be measured and paid separately. (b) All cables terminating into MCBs shall be connected by using suitable copper lugs/thimbles/sleeves and its cost shall be deemed to be included under respective item of Sch.

S&F of factory made epoxy polyester powder coated distribution board TP & N 4 way (VTPN MCCB DB) with metal double door (IP-54 protection) fabricated from minimum 1.6 mm thick CRCA sheet and fixed on wall and suitable for universal mounting and including 200 Amps copper bus bar, Neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with provn for DPX 160, 4 pole MCCB and ELM as incommer and 12 SP MCBs outgoings complete all as specified including taking down old DBs all as specified and as directed. NOTE (a) MCBs shall be measured and paid separately. (b) All cables terminating into MCBs shall be connected by using suitable copper lugs/thimbles/sleeves and its cost shall be deemed to be included under respective item of Sch.

S&F in of MCCB 125 Amp 4 pole 16 KA at 415 V with fixed thermal megnatic release complete all as specified and as directed.

S&F of single pole MCB 6 to 32 Amps, 240 v, 50 Hz AC Made from moulded self-extinguishing thermostat plastic and suitable for ‘B’ curve, 10 KA breaking capacity including taking down old MCB's complete all as specified and as directed.

S&F of single pole MCB 40 Amps, 240 v, 50 Hz AC Made from moulded self-extinguishing thermostat plastic and suitable for ‘B’ curve, 10 KA breaking capacity including taking down old MCB's complete all as specified and as directed.

S&F of SPN MCB 32 amp, 240 v, 50 Hz AC Made from moulded self-extinguishing thermostat plastic and suitable for ‘C’ curve, 10 KA breaking capacity, complete all as specified and as directed.

Supply and fix in repair LED batten luminaire surface mounted system wattage of 20 watts and system lumen efficacy=>100 lm/watt output, power factor=>0.9, color temperature 3000K- 6500 K ,voltage range - 150 to 270 volts AC and including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire fixed complete all as specified and as directed.

Supply and fixing LED lights fitting 1x 10 W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.

S&F Exhaust fan 300 mm sweep, copper winding, metal body, four metal blades BEE approved/ISI marked, mounted in suitable opening arrangement in brick wall/window with louvers shutters, suitable for operation on 220-240 volt, single phase, AC supply and connecting up using flexible wire complete all as specified and as directed.

S&F surface mounting LED building security light fitting fitted in high pressure die cast aluminium housing not less than 35 W including fabrication of GI bracket 25mm dia suitable for fixing of LED light fitting duly fixed with clamps, nut bolts & washer etc. Fixture should have minimum efficacy at system level >=100 lumens/watt, CCT 4000-6500K, IP 66 protection with an operating voltage Range of 140-270V including all connection upto ceiling rose complete all as specified and as directed.

S&F ceiling rose 3 phase, PVC/polycarbonate isolated body complete all as specified and as directed.

S&F of Hot water storage (Geyser) 25 Ltrs capacity, BEE 5 star rated,vertical type with suitable size of fastner and incl provision and connecting up of ss braided pipe with adopter for inlet and outlet water connection, copper element corrosion resistance antiscaling magnesium anode, having adjustable knob for temperature control and inner tank material of superior glass lined tank and outer body material ABS with high pressure with standing capacity upto 8 bar presuure, having heating element 2 KW and minimum two year warranty on product, minimum 3 years warranty on heating element complete all as specified and as directed.

M & L for Earthing complete with galvanised steel earth plate electrode 60cm×60cm× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel, connected to earthing test point, earth lead protected by medium grade 15 mm dia GI pipe connected to main control board and GI pipe medium grade 20mm bore for watering and including funnel, wire mesh, RCC pit cover and PCC chamber pit with PCC 1:2:4 B-1 ( including excavation and earth work, disposal of surplus soil to a distance not exceeding . 50 Mtrs) all as specified. Note:-(a). PCC pit shall be provided at list 500 mm away from the earth pit and not just on the earth pit and extra cost of additional length of water pipe and fittings, junction, elbow etc shall be deemed to be included in the unit rate. (b). RCC pit cover shall be of pre-cast RCC 1:2:4, type B-1, 80 mm thick reinforced with XPM weighing not less than 4 Kg/ Sq m in lieu of cast iron cover all as specified or indicated including testing on completion all as specified and directed.

M/s M M BAHL (BID ID -3361766)

L G BUILDERS (BID ID -3361936)

M/S Chhavi Constructions Co (BID ID -3362418)

Shivom Projects Private limited (BID ID -3362503)

MINHAS CONSTRUCTIONS (BID ID -3362075)

Adhunik Builders (BID ID -3362584)

M/S Rohit Enterprises (BID ID -3361992)