Repair/replacement of HPSV/MH light fittings into LED flood light fittings of high mast pole of Roll Call ground at 39 GTC Varanasi Cantt

Amount

M&L for taking down old unserviceable HPSV flood light fittings from hi mast pole 16 mtr high any type /cap

Supply and fix LED flood light luminary 200 watt with secondary optics made in pressure die-cast housing and heat sink in Aluminium extrusion with IP -66 of make Bajaj (Turbo LED) cat part No BARFEG 200W LED.

M&L for taking down old unserviceable copper cable and Supply and fix PVC insulated 6 Sqmm 4 core copper conductor cable and making connection all as directed.

M&L for taking out old unserviceable aviation light and S&F integral LED aviation light comprising of aluminium housing with polycarbonate enclosure of Make : Bajaj cart part No BGAV 302 LED.

M&L for taking down and servicing / greasing of all moving part double drum winch with gear box and replacement of motor bearing all as specified.

M&L for replacement of suspension wise rope stainless steel 6mm dia grade 316/304 of 7/19 construction with stainless thimble and terminal without any joint all as specified and directed.

S&F three phase 415V 6KW programmable astronomical timer switch suitable for Indian region longitude and latitude with 4 pole contractor ML 1.5 and MCB TPN 63 Amp with factory made sheet metal enclosure with locking arrangement cable entry gland for incoming and outgoing cable and fixing arrangement including making all electric connection complete all as specified and directed of Make : Legrand/ABB/Siemens.

M&L for renewal of earthing complete with galvanised steel earth plate electrode 600 x 600 x 6 mm thick buried directly in ground (earth pit not less than 2.25m deep below GL with top edge of plate not less than 1.50 m below normal ground level) connected to galvanised earth lead strip 25mm x 4 mm (7.5m) as means of bolts, nuts, check nuts and washer besides brazing at all joints as shown on drawings and including excavation, earth work, GI pipe (ISI mark) light grade 40mm bore for protection of GI strip from earth electrode to and including the earth test point, supplying and laying charcoal dust, common salt, PCC 1:3:6, type C-1 (using 20mm graded crushed stone aggregate) chamber and mild steel angle iron frame 40 x 40 x 3 mm and 40 mm thick pre-cast RCC cover 1:2:4, type B-1 (using 20mm graded crushed stone aggregate) reinforced with 8mm dia TMT bars @75mm C/C both ways with mild steel handle 12mm dia, PGI funnel and wire mesh, 20mm dia GI pipe light grade (ISI marked) for watering all as shown in electrical plate No 3 of SSR Part – I and connected to earth test point including testing and taking down of old/ineffective earthing complete all as specified and directed. (Note : The rates quoted shall also deemed to include the cost of Earth test point and earth wire and protection pipe upto 7.5 meter beyond the earth plates electrode).

SCHEDULE OF CREDIT (i) Rate quoted by the Tenderer for this schedule should not be less than rate assessed by the department shown on estimated rate column for the respective items. (ii) The quoted rate sum will be arrived after deducting amount of Schedule of credit from the total amount of the BoQ.

Old unserviceable flood light fitting any type / cap

Old unserviceable service cable any type / size

Old unserviceable aviation light fitting any type

Old unserviceable stainless steel wire rop andy type/size

TECH-NIG COMPUTERS

SHUBHAM CONTRACTOR