Supplying and erection of electrical poles at chabbi plot and stringing of streetlight phase and Replacement of scrap lights at mavanur main road in ward no.80 of Hdmc,hubli

Supplying and erection of electrical poles at chabbi plot and stringing of streetlight phase and Replacement of scrap lights at mavanur main road in ward no.80 of Hdmc,hubli

11.9.1LED Floodlight 70W Supply of LED floodlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with...

11.8.2 LED Streetlight 40W

Supply of LED Streetlight lumina ire with pressure die cast aluminum housing body for optimal thermal dissipation.Lamp compartment comprising of anti glare clear diffuser wi...

5.7.2) 32Amps Fuses Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers.

5.13.1) 25 A Contactor Switch Supply and fixing of 4pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 Ratin...

5.47) Electronic Timer

Supplying and fixing Microprocessor based Electronic timer

(without contactor, Din Mounting using necessary bolts, nuts

and washers etc. 3-120sec setting.

5.18.1 6-32 A SP MCB Switch Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 wi...

5.18.7 6-32 A TPN MCB Switch Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 w...

3.9 Hylum plastic sheet Supplying and fixing hylum plastic sheet 3mm thick with necessary nitches for fixing switches, regulators etc., and fixing on existing wood or metal box using N.F. screws.

5.42.3 MS Box Fabricating supplying and mounting MS box made out …SWG suitable for floor / wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front c...

5.41.1 Angle Iron Supplying and fixing angle iron frame work fabricated out of M.S. angle iron. and M.S. flat … with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of ...

13.1 Using 25mm diameter G.I.Pipe Bend Supplying and Fixing of.mm dia class A GI pipe bracket upto 2 ms long bent at suitable angle and fixing to this bracket 1x40/2x40 W fluorescent tube street light...

21.05 Labour Charges Labour charges for laying of 1.1 KV class UG cable in existing trench GI pipe / stoneware pipe / on wall / on pole as required.21.05 ) 2.5 to 25 Sq mm

1.4.1 In all kinds of soils Depth upto 1.5 m Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such si...

Digging of Pit for providing GI Pipe type Earthing 1.6.1 Ordinary Soil

32.05 UG Cable Supplying of 1.1 KV LT UG cable XLPE or Heat resistant

PVC insulated, PVCextruded Inner sheath armoured UG LTcable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness i...

66.04 HDPE/PLB Pipe 50/42 mm Optical Fibre Cable (OFC) and its

Pot Head Supplying and fixing of class A (medium duty) GI pipe of wall thickness not less than 3.25mm on pole/wall/drain crossing with necessary clamping arrangements for UG cable of 1.1KV. 35.01) Up ...

51.01) Pipe Grounding Pipe type earthing for each street light box 54.01) GI Grounding pipe, B - Class, 42 mm dia, 2.5 Mtr long,3.2 mm thick with bolt, nut, GI Strips and washer complete Minimum Weigh...

51.02) Pipe Grounding Good Quality well burnt Charcoal for grounding purposes packed in non returnable gunny bag of 30 Kg each

51.03) Pipe Grounding Good Quality Salt for grounding purposes packed in 50 Kg gunny bag

1.01) RCC Pole - 9 Mtr Long, 145 Kg WL

(Dwg No. BESCOM/GM/QS&S/02 Dtd 24.11.2018) as per IS-785

2.16 Spiral Earth Electrode .

7.02 Rabbit ACSR (6/3.35 mm Al + 1/3.35 mm St), Std Wt: 214 Kg/KM

6.07 No. 8 Strain Insulator

6.03 1.1 kV Ceramic Pin Insulator (Shell onl

2.07) LT 2 Pin Cross Arms - MS

2.02 Erection of RCC/PSCC Pole of 9 to 10 Mtr long in a pit of 1.8 Mtr depth

Digging of Pit 1.8 Mtr depth for errection of 9 to 10 Meter Long Steel RCC PSCC supports as per approved Drawing.1.1.1 Ordinary Soil .

5.01 Fixing of 2 Pin cross arm with Insulator and Braces fixing

6.02 Stringing of conductor Rabbit A C S R binding of conductor on each insulator and dead ending on strain or disc strain insulator by means of clamps

Digging of Pit for GUY SET 1.7.1 Ordinary Soil

5.10 Fixing of GUY Set with break insulator making use of 7/3.15 mm (7/10 SWG) galvanised steel wire with turn buckle and anchoring arrangement as per approved drawing. (Excluding excavation of PIT)

8.01 7/10 SWG Guy Wire, Basic Rate:77226.00

(7/3.251 mm Dia), Std Wt: 680 Kg/KM

5.09 Guy Clamp - MS,

5.44.1 300 mm x 300 mm x 214 mm Supply and Installation / Fixing / Provision of Outdoor type Thermoplastic Modular Panel enclosure with transparent Polycarbonate Lid, shock proof, IP65 (Weather Proof)...

13.4.1 Single bracket 1.5 m. Length For Minimast Poles Supplying and fixing telescopic M.S. bracket fabricated by using 0.5m length 4" dia telescopic M. S. pipe, with 2" dia1.5m long M.S.Bracket and a...