Development of roadside plantation and parks at EWS Site in Sector 32 A UE Karnal.(Providing and Fixing of Open Gym, Children playing Equipments, Garden Benches, Dustbin ,Construction of platform with three year mtc and defect liability

[10.100.2]Cement Concrete 1:8:16 Flooring 2. Cement Concrete 1:8:16 with stone aggregate 40 mm size in foundation and plinth. [Through Rate]

[10.30.1]Providing and laying of chequered precast cement concrete tiles 22 mm thick in footpath and courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). 1. Light shade pigment using white cement [Through Rate]

[26.58.1]Supply and installation of garden bench 1. Chair type garden bench with L-shaped sides made of reinforced concrete (M30), thickness 100 mm, overall height 1000 mm, base width 620 mm. Back and seat shall consist of 5 Nos. reinforced concrete planks 1500 mm x 100 mm x 50 mm one plank 1500 mm x 200 mm x 50 mm. Seating height of the bench shall be 450 mm. The bench shall be fixed with nuts on concrete mount, all holes sealed after assembly and installation. All materials required to be as per BIS specifications. [Through Rate]

[26.58.3]Supply and installation of garden bench 3. Cast Iron bench of 1800 mm length, 900 mm width, 450 mm seating height, sides made of cast iron. Seat and back shall be made of 10 strips of M.S. pipes 63 mm x 25 mm of 14 gauge with one M.S. Flat 25 x 10 mm welded at the centre, below and back of the seat and back rest. Spray painted with approved brand paint. Fixed by grouting with 1:2:4 cement concrete (Minimum weight of each bench 105 kg). All materials required to be as per BIS specifications. [Through Rate]

[26.76]Providing and fixing pair of Plastic dustbins 100 litre volume each, of two different colours, for dry and wet waste, made of virgin plastic to be mounted on MS rectangular hollow section 50 x 25 x 3 mm frames pivoted on 3 MS square hollow section verticals, 1 m above ground, one 35 cm RHS welded to each vertical member at base and grouted in 180 x 40 x 30 cm 1:2:4 cement concrete. [Through Rate]

[4.12.1]Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead up to 50 m and lift up to 1.5 m, as directed by Engineer-in-charge. 1. All kinds of soil [Through Rate]

[6.39.1]Providing and fixing at or near ground level precast cement concrete in kerbs, edgings etc. as per approved pattern and setting in position with cement mortar 1:3 (1 Cement : 3 coarse sand), including the cost of required centering, shuttering complete. 1. 1:1½:3 (1 Cement: 1½ coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size). [Through Rate]

Providing desiging and fixing of Double Air Cross Walker of size 1600 x 600x 1600 mm fabricated with main post of 140mm dia and 300 mm thick and other pipes of 40mm dia 300mm thick made up of MS and fully painted with drawing 18/0 Asian paint complete in all respect upto satisfaction of Engineer in charge.

Providing desiging and fixing of Elliptical exerciser (Double) of size 2200 x 500 x 2000 mm fabricated with post of 140mm dia and 3.00 mm thick and other pipes of 40mm dia 3. 00mm thick made up of MS and fully painted with drawing Asian paint complete in all respect upto satisfaction of Engineer in charge.

Providing desiging and fixing of Arm Wheel of size 850 x 800 x 1800 mm fabricated with main post of 140mm dia and 3.00 mm thickness and other pipes of 40mm dia 3.00 mm thick made up of MS and fully painted with fast drawing Asian paint and complete in all respect upto satisfaction of Engineer in charge.

Providing desiging and fixing of Tripal Twister of size 1700 x 1300 x 1300 mm fabricated with main post of 140mm dia and 3.00 mm thick and other pipes of 40mm dia 3.00mm thick made up of MS and fully painted with fast drying Asian paint complete in all respect upto satisfaction of Engineer in charge.

Providing desiging and fixing of Pull chair of size 1900 x 1450 x 1600 mm fabricated with main post of 140mm dia etc complete in all respect upto satisfaction of Engineer in charge.

Providing desiging and fixing of Chest Press open air gym machine complete in all respect upto satisfaction of Engineer in charge.

Providing desiging and fixing of Horse Rider Station open air gym machine complete in all respect upto satisfaction of Engineer in charge.

Providing and Fixing of Children Playing Equipments chain swing, slide 12` long x 16` wide x 5` high, setter sea-saw frame, Bridge Ladder High Frame, Merry GO Round Complete in all respect.