ADDITION ALTERATION AND SPECIAL REPAIRS OF ENGINE AND MISSILE BAY P484 AT NAY GOA AND PROVISION OF PARKING SHED NEAR P482 AND ADDITION ALTERATION IN ATCOs ROOM AND OFFICERS TOILET AT ATC P259 AT INS HANSA UNDER AGE EM I AND AGE BR I OF GE NW VASCO.

Amount

ADDITION / ALTERATION AND SPECIAL REPAIRS OF ENGINE AND MISSILE BAY (BLDG NO. P/484) AT NAY (GOA)

Taking down/out loose & damaged concrete/cement plaster from soffits of ceilings, floor/roof slabs, vertical surfaces of columns, beams etc., including exposing and removing rust from the reinforcement by rubbing with wire brush and removal of debris to a distance n. exc. 100 mtr and depositing where directed

M&L for gunniting exposed concrete surfaces of beam, column and slabs with one layer of complast spray set modified concrete in proportion (50Kg cement 3 to 6mm granite chips 75 kg zonal sand 75 kg and complast 2% by weight of cement water 1 to the following locations :-

(a) 40 mm thick in columns

(b) 30 mm thick in beams

(c) 20 mm thick in slabs

S&F hard drawn steel wire fabric cut to length bent to shape required and tying with and including mild steel wire (annealed) not less than 0.9mm dia not exc. 4 Kg/sqm.

Bonding the entire exposed surface with one coat of fosroc Nitop bond SBR as per manufacturer instructions over whire fabric and surfaces of concrete structure

M&L for remove the spalled concrete upto the sound core level and clean reinforcement with wire brush to remove loose scales, cleaning of the surface with wire brush and plenty of water so as to remove the loose particles, dust, laitance etc, remove the rust by using rust remover of approved make. Apply passivator coat using zinc primer of approved make on reinforcement Bars. Apply bond coat using "Epoxy bonding agent" on entire surface, when bond coat becomes tacky apply repair mortar (mortar to be prepared by adding 20% Dr. Fixit Pidicrete MPB or equivalent to 1:3 cement sand mortar) at a thickness upto 15mm and subsequently built up the required thickness in subsequent layers of 15mm and finishing the final layer even and smooth as per manufacturers instruction and as directed. Make : M/s Pidilite Industries Ltd or Eqult in M/S Krishna Conchen Products/ STP Ltd. Note- Univeral polymerised repairs mortars single pack like pagel U40 or Dr fixit micro concrete may also be used

Taking down cement plaster on brick or stone walls, ceiling etc. including raking out joints, hacking for key, scrubbing down with water, etc.

Dismantling/Taking out existing hessain base felt of any other existing water proofing treatment from roof including cement plaster and exposing the top surface of RCC slab including removing dust, dirt and washing the roof and removing the dismantled debris to a distance exceeding 200 m but not exceeding 3000m spread and levelled as directed by Engineer-in-Charge.

Demolition of Cement Concrete including toppings in ground floors and pavings n exc 15 cm thickness (below or above ground level)

Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified of dia 20 mm.

All as the item No. 1.12 but of 32 mm dia

S&F in repair Stop valves fancy type, chromium plated 15 mm dia, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed

S&F in repairs chromium plated fancy type Bib taps 15 mm dia, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed.

S&F PVC Connections 15mm size with PTMT nuts of length 600mm

S&F sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x160mm

ADDITION / ALTERATION AND SPECIAL REPAIRS OF ENGINE AND MISSILE BAY (BLDG NO. P/484) AT NAY (GOA) INTERNAL ELECTRIC SUPPLY

M & L for one point wiring with PVC insulated un-sheathed cable with stranded copper conductor FR-LSH conforming to IS : 694 of size 1.5 Sq mm single core, including one No. 1.5 Sq mm single core PVC insulated un-sheathed copper cable FR-LSH as continuous earth wire drawn in and including PVC Casing & Caping double lock type of as required width (not less than 20 mm in width) ISI marked medium grade white colour with all accessories of same grade fixed on wall/ceiling including terminated in to Cast iron/pressed steel terminal box 60mm deep of required size made out of 2mm thick MS sheet duly painted both sides with 3 mm thick plastic laminated sheet top cover fixed with brass screw & cup washers and including provision of modular metal flush box, modular cover plate with frame top cover for mounting switches, fan regulators etc for one light/Exhaust fan point controlled by one 5 Amp switch one way complete all as specified and as directed.

All as per item No. 2.01 here in before, but for one 3/5 Pin, 5 Amp Switch socket out let on the independent board complete all as specified and as directed.

M & L for surface point wiring with PVC insulated un-sheathed cable with stranded copper conductor FR-LSH conforming to IS : 694 of size 2.5 Sq mm single core, including one No. 2.5 Sq mm single core PVC insulated un-sheathed copper cable FR-LSH as continuous earth wire drawn in and including PVC Casing & Caping double lock type of as required width (not less than 20 mm in width) ISI marked medium duty, with all accessories of same grade, fixed on wall including provision of modular metal flush box, modular cover plate with frame top cover for housing mounting switch socket combination 2 in 1, 3 pin, 5 and 15 Amp flush type on the independent board complete all as specified and as directed

S & F modular Switch single pole one way 6 A, 240 V , 1 Module complete all as specified and as directed

S & F modular Switch single pole one way 16 A, 240 V , 1 Module complete all as specified and as directed

S & F Modular Socket outlet 2 in 1, 6 Amp , 240 volts, 2 Module complete all as specified and as directed

S & F Modular Socket outlet 5A/16A, 5 in 1, 3 pin, flush type universal, 240 volts 2 Module complete all as specified and as directed

S & F Ceiling rose, surface bakelite, 65 x 50 mm two/ three terminals 240 volts complete all as specified and as directed

Supply and fix in repairs LED tube light fitting and tube light 1 x 18 Watts 4 feet long, 230V indoor decorative aluminum extruded LED integrated batten, complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable sizes complete all as specified and directed. Make :- Wipro/Bajaj/Philips/Luker

S&F Exhaust fan of size 300mm, 70 W, 1400 RPM, with the air delivery of 1300 CMH, cutting complete all as specified and directed by Engineer-in-Charge.

M & L for Earthing complete with Galvanised earth plate electrode 600 x 600 x 6 mm thick buried directly in ground earth pit not less than 2.25mtr deep below normal ground level with top edge of the plate not less than 1.5 mtr below normal ground level connected to galvanised earth wire 4 mm dia by mean of nuts/bolts, check nuts and washers of brass as shown in electrical plate No. 5 of SSR Part-I including necessary excavation and earth work, GI Pipe 15 mm bore light grade for watering with Funnel, wire mesh and protection to earth lead shall be provided with GI pipe light grade 20 mm dia up to 7.5 mtr from the earth plate electrode and refilling of soil including adequate quantity of charcoal dust and common salt etc & earth work in any strata, PCC pit chamber in cement mortar 1:3:6 type C-2 with 40 mm thick Precast RCC cover slab 1:2:4 type B with 8 mm dia TMT bar and handle with lifting hooks including testing any type complete all as specified and as directed.

M & L for Sub main wiring with four run, single core 10 Sqmm FRLS copper conductor cable PVC insulated, unsheathed, 1100 volts grade drawn through PVC Casing - caping, ISI marked with all accessories such as Tees, elbows, junction boxes etc, as required fixed on wall along with two run of 10 Sqmm single core PVC FRLS insulated unsheathed copper conductor cable as continuous earth wire and connecting to main switch board / distribution board to light/ fan/ any description and testing on completion etc including other accessories for the following runs as directed. (Note :- Two runs of cable, one run of earth continuity conductor and one run of PVC casing caping/conduit shall be measred as one unit)

S & F in repairs MCB DB TPN 4 way DB 415 V with 200 A rated bus bar double door type complete all as specified and as directed.

S & F in repairs MCB TPN 40 amps 415 volts C curve, 50 HZ AC 10 KA including lugs complete all as specified and as directed

S & F MCB SP 06 to 32 amps 230 volts C curve, 50 HZ AC 10 KA complete all as specified and as directed

EXTERNAL WATER SUPPLY

Supply and lay pipe galvanized, “Medium Grade”, including fittings 40 mm (1.5”) dia

Supply and lay pipe galvanized, “Medium Grade”, including fittings 20 mm (3/4”) dia

Supply and fix Gun-metal gate valves with iron wheel head, screwed both ends for iron pipe, ISI Marked, as per IS:778, complete all as specified and directed, suitable for the following bore of pipes :-

(a) 20 mm bore

(b) 40 mm bore

Excavation in trenches soft / disintegrated rock not. exceeding 1.5 mtr wide and not exceeding 1.5 mtr depth for foundations, laying water mains, pipes, cables, etc getting out and formaing bottom surface to required gradient complete all as specified

Returning filling in including spreading leveling, watering and well ramming in layer not less than 25 cum each layer all as specified.

Removing excavated material to a distance not exc 50M and depositing where directed at a level n.exc 1.5 mtr above the starting point complete all as specified

Cutting old cast iron/GI pipes only and reducing to required length, before laying in position, for insertion of new tees, branches, etc for new works, complete all as specified and directed, suitable for the following bore of pipes :-

PROVISION OF PARKING SHED NEAR BLDG NO. P/482 AT GOA

Excavation in trenches not exc. 1.5 m in depth and not exc 1.5 m wide in soft disintegrated rock for foundation and getting out

PCC type D2 1:4:8 (40mm aggregate) in foundations filling and mass concrete

M&L RCC 1:1.5:3 (Type A-1), 20mm graded aggregate as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete

M&L RCC 1:1.5:3 (Type A-1), 20mm graded aggregate as in Columns, pillars, piers, posts and struts

M&L RCC 1:1.5:3 (Type A-1), 20mm graded aggregate as in Beams, cantilevers, bressummers, lintels over 1.5m span

M&L Mild steel bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required including crancking, bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality conforming to TMT Bars.

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter

Formwork to sides of pillars, posts, struts, piers, columns and stanchions

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping)

Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering

Removing excavated material exc. 1.50 km but n exc. 5 km and depositing where directed

M&L Rendering 15 mm thick cement plaster on concrete solid block walls in CM 1:4 finished to even & smooth w/o using extra cement.

Preparation of New plastered surface and applying two coats of weather proof high glove antifungal paint on external surface with suitable primer

Providing 10mm thick plaster in CM (1:4) mixed with 3% integral water proofing compound over roof top surface finished to even & smooth w/o using extra cement. Note :- Integral water proofing compound will be measured and paid separately.

M&L for preparation of surface with wire brush and remove loose particle & laitance, wash with clean water, damaged or hollow portion, sharp edges etc. must be cut and removed till the mother slab. Filling the cracks and damaged portion with polymer mortar and allow it to cure for 24 hrs. Brush apply the 1st Priming coat (Dr. Fixit primeseal or equivalent) on prepared concrete/plastered surface by diluting 2 parts of Primeseal with 1 (one) part of water and allow to dry for 04 (four) hours. Apply the first coat of waterproofing coating (Dr. Fixit Newcoat/ Waterseal Concentrate of M/s Krishna Conchem Products) without any dilution at the rate of 2 Sqm per liter over the primed surface. On the wet surface of 1st coat overlay a open-woven fibre glass mesh, min 40 GSM of size 2mm x 2mm and allow it to soak completely. Immediately apply the second coat with a roller, to ensure complete coverage of the fibre mesh. Apply the third coat after 6 to 8 hrs once the second coat is dry. Drying time between coats will be 6 to 8 hours all as directed and as per manufacturer’s instructions.

M & L 75 mm thick Cement concrete type D2, 1:4:8 (using 40 mm graded stone aggregate) in sub base of flooring/ hard standing/ pavings/ plinth protections, etc.

S&F Toughened glass fixed window with toughened glass of 12 mm thick fixed with aluminium frame including all necessary fittings and frame works Design: Blumcraft's series or equivalent as approved by GE.

S&F Toughened glass door with toughened glass of 12 mm thick fixed with floor spring, hold & open function, 300 mm long stainless steel pull handles, locking arrangements incl all necessary fittings and frameworks. Design: Blumcraft's series 1301 or 640c or equivalent as approved by GE.

PROVISION OF PARKING SHED NEAR BLDG NO. P/482 AT GOA. E/M PORTION

M & L for one point wiring with PVC insulated un-sheathed cable with stranded copper conductor FR-LSH conforming to IS : 694 of size 1.5 Sq mm single core, including one No. 1.5 Sq mm single core PVC insulated un-sheathed copper cable FR-LSH as continuous earth wire drawn in and including PVC Casing & Caping double lock type of as required width (not less than 20 mm in width) ISI marked medium grade white colour with all accessories of same grade fixed on wall/ceiling including terminated in to Cast iron/pressed steel terminal box 60mm deep of required size made out of 2mm thick MS sheet duly painted both sides with 3 mm thick plastic laminated sheet top cover fixed with brass screw & cup washers and including provision of modular metal flush box, modular cover plate with frame top cover for mounting switches, fan regulators etc for one light point controlled by one 5 Amp switch one way complete all as specified and as directed.

All as per item No. 5.01 here in before, but for one 3/5 Pin, 5 Amp Switch socket out let on the independent board complete all as specified and as directed

M & L for surface point wiring with PVC insulated un-sheathed cable with stranded copper conductor FR-LSH conforming to IS : 694 of size 2.5 Sq mm single core, including one No. 2.5 Sq mm single core PVC insulated un-sheathed copper cable FR-LSH as continuous earth wire drawn in and including PVC Casing & Caping double lock type of as required width (not less than 20 mm in width) ISI marked medium duty, with all accessories of same grade, fixed on wall including provision of modular metal flush box, modular cover plate with frame top cover for housing mounting switch socket combination 2 in 1, 3/5 pin, 5 and 15 Amp flush type on the independent board complete all as specified and as directed

S & F modular Switch single pole one way 6 A, 240 V, one module complete all as specified and as directed

S & F modular Switch single pole one way 16 A, 240 V, one module complete all as specified and as directed

S & F Modular Socket outlet 2 in 1, 6 Amp, 240 volts, 2 module complete all as specified and as directed

S & F Modular Socket outlet 6A/16A, 5 in 1, 3/5 pin, 2 module flush, type universal, 240 volts complete all as specified and as directed

S & F Ceiling rose, surface bakelite, 65 x 50 mm two/ three terminals 240 volts complete all as specified and as directed

Supply and fix LED tube light fitting and tube light 1 x 18 Watts 4 feet long, 230V indoor decorative aluminum extruded LED integrated batten, complete with all accessories internally pre- wired and including connecting up with twin core twisted flexible copper conductor cable with suitable sizes complete all as specified and directed. Make :- wipro/Bajaj/Philips/luker

M & L for Sub main wiring with two run core 6 Sqmm FRLS copper conductor cable PVC insulated, unsheathed, 1100 volts grade drawn through PVC Casing - caping, ISI marked with all accessories such as Tees, elbows, junction boxes etc, as required fixed on wall along with one run of 4 Sqmm single core PVC FRLS insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board / distribution board to light/ fan/ any description and testing on completion etc including re-fixing the conduit/ PVC casing caping, other accessories for the following runs as directed (Note :- Two runs of cable, one run of earth continuity conductor and one run of PVC casing caping/conduit shall be measured as one unit)

M & L DB with sheet metal enclousere 240 volts, 8 way with 200 Amp rated bus bar SPN double door type for MCBs including mounting work as required in position complete all as specified and as directed

S&F MCB SPN 40 amps 230 volts C curve, 50 HZ AC 10 KA complete all as specified and as directed.

S & F MCB SP 06 to 32 amps 230 volts C curve, 50 HZ AC 10 KA complete all as specified and as directed

ADDITION /ALTERATION IN ATCOs ROOM AND OFFICERS TOILET AT ATC (BLDG NO. P/259) AT INS HANSA

Taking down chowkat or frames not exc 1.5 sqm each(w/o taking of shutters from the frame and removing to store) .

Taking down chowkat or frames exc 1.5 sqm but n. exc 4 sqm each(w/o taking of shutters from the frame and removing to store) .

Taking down shutters, Resecuring or eashing & adjusting and Refixing in same opening of any description exc 1 sq. m and n exc 2 sqm each

Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing), removing serviceable tiles to store and rubbish off the premises

Taking down cement plaster any description on brick or stone walls, ceiling etc. including racking out joints, hacking for key, scrubbing down with water etc.

Dismantling old damaged PVC water tanks and removing to store exc 500 and not exc 1000 ltrs capacity .

Taking up or down steel water tubing and connections including cleaning for refixing or removing to store 15 mm dia .

Taking up or down steel water tubing and connections including cleaning for refixing or removing to store 20 mm dia .

Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) with frame any thickness, including cover fillets.

Providing & Fixing of Armstrong Mineral Fibre Acoustical Suspended Ceiling System with ANF (Board) edge tiles with Armstrong 24mm exposed grid. The tiles should have Humidity Resistance (RH) of 90%, NRC 0.5, Light Reflectance ≥85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Colour White, Fire Performance UK Class 0 / Class 1 (BS 476 pt - 6 &7) in module size of 600 x 600 x 15mm , suitable for Green Building application, with Recycled content of 34%.The tile shall be laid on Armstrong Prelude38 with 24 mm wide T - section flanges colour white having rotary stitching on all T sections i.e. the Main Runner, 1200 mm & 600 mm Cross Tees with a web height of 38mm and a load carrying capacity of 15.34Kgs/M2 & pull out strength of 100Kgs. The T Sections have a Galvanizing of 90 grams per M2 and need to be installed with Suspension system of Armstrong make. The Tile & Grid system used together should carry a 10 year warranty all as directed by Engineer in Charge.

Demolition of stone /boulder masonry, built in cement mortar including all quoins, arches, pillars, etc., but excluding ashlar facings, dressed stonework and precast concrete articles.

Pre - cast cement concrete masonry with Grade C-5.0, (20mm graded stone aggregate) with solid blocks wall built in cement mortar 1:6

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc.

M&L Mild steel TMT bars 10mm dia and over cut length bent to shape required including cranking bending speirally for hooping for columns, hooking ends and binding with and including mild steel wire.

All as per item No. 6.14 but 6 to 8 mm dia.

M&L RCC 1:1.5:3 ( Type A 1 ) using 20 mm graded aggregate in slabs supported on walls, beams etc. complete all as specified and as directed.

M&L screed bed or bedding layer of morter 15 mm thick cement plaster 1:4 for laying floor finishes.

M&L rendering 10mm thick in cement plaster 1:4 on concrete surfaces or to receive tiles/ kota stone on vertical surfaces .

M&L Vitrified Ceramic tiles 10 mm thick (Square/rectangular) polished area of each tile not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match.

M&L non-skid coloured ceramic tiles 7 to 8mm thick area of each tile exceeding 0.06 Sqm but not exceeding 0.11 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the coloured tiles.

M&L for glazed colour ceramic tiles in vertical surfaces 450x300x7mm thick set and jointed in neat cement slurry and pointed in colour cement to match

M & L Granite as approved type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing and chamfered edges if required complete all as specified.

M & L 20mm thick granite tiles, machine cut, in vertical/horizontal laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of the granite stone including grinding and polishing complete.

Rendering 15mm thick on other than fair faces of brick/stone masonry or concrete surfaces of walls in Cement mortar 1:4 in two coats, 10mm thick and finished with 5mm jthick mixed with approval water proofing compound @ 3% by wt of cement finished even & smooth without using extra cement. Note : Water proofing compound will be measured and paid seperately.

M&L rendering 10mm thick on fair faces of brick work or concrete surfaces finished even & smooth without using extra cement in CM 1:6

M&L rendering 5mm thick on fair faces of brick work or concrete surfaces finished even & smooth without using extra cement in CM 1:4 on ceiling.

Supply only water proofing compound

M & L for preparation of new surfaces of walls and applying two coat of acrylic anti-fugal weather proof exterior grade paint of first quality over a coat of primer including sealing the cracks all as specified in manufacturers instruction Make STP Ltd (Shallcry - 215)/ Asian Paint (Ultima stretch)/ Berger Paint (Weather coat long) all as specified and as directed.

M&L for one coat of acrylic antifungal paint on walls along with suitable pigment for colour including preparation of old surface including sealing the cracks all as specified in manufacturers instruction Make STP Ltd (Shallcry - 215)/ Asian Paint (Ultima stretch)/ Berger Paint (Weather coat long)

M & L for complete removal of existing treatment and preparation of old /new surfaces of walls and applying two coat of distemper oil emulsion over a coat of primer with 3mm thick putty finish completed all as specified and as directed.

M&L for two coats of oil bound distemper over a coat of primer with 3mm thick putty finish after preparation of new plastered surface of wall

M&L for two coats of oil bound distemper over a coat of primer with 3mm thick putty finish after preparation of new plastered surface of ceiling

S&F solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing

S&F Solid PVC Double door frame of size 50mm x 95mm made out of 5mm Plain colour PVC sheet reinforced with M.S. tube, supplying & fixing in opening as per specification & drawing,

S&F factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded palin colour PVC `C' channel heaving a PVC sheert strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing.

All as per item No. 6.35 but wire gauzed i.e. panel will be of wire gauze in lieu of PVC sheet panel. The wire gauze shall be wrapped on an additional square 8mm M.S. Solid tube and this tube shall be welded to M.S. tubes. The wire gauge shall be stretched to tighten firmly

S&F anodised aluminium barrel tower bolts of extruded section 150 mm long.

S&F anodised aluminium sliding door bolt 300 mm long with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy.

S&F SS Butt hinges medium weight cold rolled 100mm size.

S&F extruded anodised aluminium , fabricated type handle, anodised 150mm long

S&F powder coated aluminium door and window shutter and frame any type (sliding or openable) and other similar work etc 60 micron powder coated section, fabricated by using the JINDAL / INDAL / HINDAL CO / CENTURIAN sections including all necessary roller wheels for window, cleats , handle, door stoper locking arrangement and arrangements to received glass/ prelaminated particle board with aluminium beading and stainless steel screw incl cost of rubber gasket beadings etc complete sealing between frame & wall with epoxy sealing compound. (The weight of rubber gasket beading will not be measured with the weight of aluminium shutters, glass and prelainated particle board will be measured and paid separately) All sections as approved by GE.

S&F aluminium anodized grill of design DG-104 pattern, made out of 10mm dia rod fixed with and including stranded aluminium frame of 'F' section of size 23.4x15.3x1.4 mm thick all as per manufacturer's instructions complete all as specified and directed.

S&F 4mm thick sheet glass ordinary quality n.exc exceeding 0.5 sqm each pane .

S&F 4mm thick sheet glass ordinary quality frosted on one side n.exc exceeding 0.5 sqm each pane .

S & F Aluminium alloy wire mesh, 0.45 mm dia of wire and average width of aperture 1.40 mm and fixed with stainless wire staples

S&F 12 mm thick single side prelaminated woodgrain solid PVC sheet suitable fixed in shelves; Partitions and shelves of built-in cupboards, almirahs, book cases, toilet boxes, racks, pelmets and similar work including all hardware fittings as per direction and specifications.

S&F 18 mm thick single side prelaminated woodgrain solid PVC sheet suitablely fixed in shelves; Partitions and shelves of built-in cupboards, almirahs, book cases, toilet boxes, racks, pelmets and similar work including all hardware fittings as per direction and specifications.

Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified of dia 16 mm.

All as per item No. 6.48 but 20 mm dia

S&F Rotational moulded polyethylene water storage tanks 1000 Ltrs capacity (Cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I .

S&F in repair gun metal globe or gate valves with iron wheel head screwed both ends for union pipe and fixed 20mm dia pipe .

S&F in repair ball brass valves high pressure with polythene float and fly nut complete screwed for iron pipe or brass frame and 20mm bore .

S&F in repair wash basins 550x400mm vitreous china (flat back type) any size including cutting for and pinning in end of brackets for erecting stand, waste pipe and including waste fittings complete all as specified.

Supply and fix in repair, vitreous china counter top wash basin, size 440 x 525 x 195 mm, excluding taps, incl waste chain, plug and porcelain stopper but including brackets, cutting for and pinning in ends of bracket or erecting stand complete all as specified.

S & F in repair Push type pillar cocks fancy type cast copper alloy chromium plated concealed type suitable for counter wash basin approved make and with necessary fixing arrangements and connecting to water pipe connected fixing complete all specified and as directed.

Supply only Pillar taps cast copper alloy with capstan heads chromium plated screwed down high pressure screwed for iron pipe 15 mm dia .

M&L in repair PVC (SWR) floor trap , plain with grating including jointing with solvent cement 75 mm dia

M&L in repair cast iron Nahani trap 100 mm dia , with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) .

S&F in repair Brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing , union and cap bore of trap 32 mm

S&F in repair vitreous China wash down water closet pan (pedestal pattern) including seat cover with necessary fittings complete excluding flushing cistern.

S&F health faucet including 1.50m connection pipe chromium plated as approved make complete all as specified

Supply only PVC valveless, syphonic action type flushing cistern, low level , white, with inlet ball valve, float and handle including brackets 10 litres capacity .

S&F low density polyethelene pipes of pressure rating 6 kg/sqcm 32mm dia .

S&F in repair bib tap cast copper alloy Chromium plated with crutch or butterfly handle screwed down, screwed for iron pipe 15mm dia .

S&F in repair stop valve, cast copper alloy 15mm fancy type chromium plated with long shank & cup concealed type .

S&F for PVC connection 15mm size with PTMT nuts of length 600mm as in repairs complete

S&F as in repairs Brass chromium plated shower rose 125mm size for fixing with 15mm pipe. (Minimum weight 40gms)

S&F Tubular towel brass cromium plated rail, 20mm dia, D type, 60cm long between flanges .

S&F Soap dish, chromium plated stainless steel complete all as specified

S&F in repair Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe).

Dismantling of cast iron/ reinforcement concrete drain pipes jointed in cement mortar

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls 110mm dia including clamp fixed to wall /ceiling complete all as specified

S & F PVC (SWR) bends of bore 110mm dia

Supply & Fixed PVC (SWR) Tee equal or unequal 110 mm bore any radius.

Supply & Fixed PVC (SWR) vent cowl 110 mm

M & L cement concrete M-20, 1:1.5:3 nominal mix (12.5mm gradeded stone aggregate), for concrete grouting.

M&L Cement concrete 1:2:4, Type B-1 (20mm graded aggregate) as in copings

M&L Toughened glass door on wall panel or partition for shower including all fittings as approved size and thickness of glass of 12 mm fixed with floor spring with hold open function, with 300mm stainless steel pull handles, locking arrangements including all fittings and frame works complete all as specified. make as approved by GE (NW) Vasco

ADDITION /ALTERATION IN ATCOs ROOM AND OFFICERS TOILET AT ATC (BLDG NO. P/259) AT INS HANSA. E/M PART

Taking down carefully any type of copper/aluminium point wiring (light, fan, socket or power) complete including conduits/casing caping with fittings such as switches, ceiling roses, pendents, regulators, bells, sockets, tube light fittings etc, removing the materials/ debris and making good the disturbed surface of walls & floors etc to match with the original existing finish complete all as specified and as directed

M & L for one point wiring with PVC insulated un-sheathed cable with stranded copper conductor FR-LSH conforming to IS : 694 of size 1.5 Sq mm single core, including one No. 1.5 Sq mm single core PVC insulated un-sheathed copper cable FR-LSH as continuous earth wire drawn in and including PVC Casing & Caping double lock type of as required width (not less than 20 mm in width) ISI marked medium grade white colour with all accessories of same grade fixed on wall/ceiling including terminated in to Cast iron/pressed steel terminal box 60mm deep of required size made out of 2mm thick MS sheet duly painted both sides with 3 mm thick plastic laminated sheet top cover fixed with brass screw & cup washers and including provision of modular metal flush box, modular cover plate with frame top cover for mounting switches, fan regulators etc for one light point controlled by one 5 Amp switch one way complete all as specified and as directed

All as per item No. 7.02 here in before, but for one Exhaust fan point controlled by one 5 Amp switch one way complete all as specified and as directed

All as per item No. 7.02 here in before, but for one 3/5 Pin, 5 Amp Switch socket out let on the independent board complete all as specified and as directed

M & L for surface point wiring with PVC insulated un-sheathed cable with stranded copper conductor FR-LSH conforming to IS : 694 of size 2.5 Sq mm single core, including one No. 2.5 Sq mm single core PVC insulated un-sheathed copper cable FR-LSH as continuous earth wire drawn in and including PVC conduit medium grade of as required size (not less than 20 mm in width) ISI marked medium duty, with all accessories of same grade, fixed on wall including provision of modular metal flush box, modular cover plate with frame top cover for housing mounting switch socket combination 2 in 1, 3 pin, 5 and 15 Amp flush type on the independent board complete all as specified and as directed

S & F in repairs modular Switch single pole one way 6 A, 240 V complete all as specified and as directed

S & F in repairs modular Switch single pole one way 16 A, 240 V complete all as specified and as directed

S & F in repairs Modular Socket outlet 2 in 1, 6 Amp , 240 volts, complete all as specified and as directed

S & F in repairs Modular Socket outlet 6A/16A, 5 in 1, 3/5 pin, flush type universal, 240 volts complete all as specified and as directed.

S & F in repairs Ceiling rose, surface bakelite, 65 x 50 mm two/ three terminals 240 volts complete all as specified and as directed

Supply and fix in repairs LED tube light fitting and tube light 1 x 18 Watts 4 feet long, 230V indoor decorative aluminum extruded LED integrated batten, complete with all accessories internally pre- wired and including connecting up with twin core twisted flexible copper conductor cable with suitable sizes complete all as specified and directed. Make :- Wipro/Bajaj/Philips/Luker

S & F Energy efficient surface Mounted LED Luminire 10 watts 2' long, with acrylic cover complete with all accessories including necessary two core copper wire for connection from ceiling rose to connector of approx length 0.5 mtr all as directed. (Make :- Bajaj cat No BCLSB 10 NW or equivalent in Philips/Wipro/luker)

S&F Exhaust fan of size 300mm , 70 W, 1400 RPM, with the air delivery of 1300 CMH, Including making hole, fixing of louver and making good of surface, complete all as specified and directed by Engineer-in-Charge.

M & L for Sub main wiring with two run core 4 Sqmm FRLS copper conductor cable PVC insulated, unsheathed, 1100 volts grade drawn through PVC Casing - caping, ISI marked with all accessories such as Tees, elbows, junction boxes etc, as required fixed on wall along with one run of 4 Sqmm single core PVC FRLS insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board / distribution board to light/fan/any description and testing on completion etc incl re-fixing the conduit/ PVC casing caping, other accessories for the following runs as directed (Note :- Two runs of cable, one run of earth continuity conductor and one run of PVC casing caping/conduit shall be measured as one unit)

M & L DB with sheet metal enclousure 240 volts, 4 way with 200 Amp rated bus bar SPN double door type for MCBs including mounting work as required in position complete all as specified and as directed.

S&F MCB SPN 06 -32 amps 230 volts C curve, 50 HZ AC 10 KA complete all as specified and as directed.

S&F MCB SP 06 to 20 amps 230 volts C curve, 50 HZ AC 10 KA complete all as specified and as directed.

SURAT SINGH AND SONS

M/S Kartik Enterprises