Repair/replacement of street light/security lights and connected E/M items at Dholewal, CG Complex, Doraha Phillaur, Baddowal and Moga under GE Ludhiana

Amount

S & F in replacement LED street light luminaire of 60 watt in epoxy powder coated pressure die-cast aluminium housing of standard size, BIS marked electronic driver of approved brand only in housing having protection against over voltage, short circuit and open circuit and surge protection against lightening IP-66, protection for LED and control gear compartments with high power LED chips suitable for voltage band 120 volts to 270 volt, power factor 0.95 (minimum) having efficacy 100 lumens/watt. Brand name should be embossed on fixture to ensure Indian brand only all as specified and directed by Engineer-in-Charge.

S & F in replacement LED street light luminaire of 90 watt in epoxy powder coated pressure die-cast aluminium housing of standard size, BIS marked electronic driver of approved brand only in housing having protection against over voltage, short circuit and open circuit and surge protection against lightening IP-66, protection for LED and control gear compartments with high power LED chips suitable for voltage band 120 volts to 270 volt, power factor 0.95 (minimum) having efficacy 100 lumens/watt. Brand name should be embossed on fixture to ensure Indian brand only all as specified and directed by Engineer-in-Charge.

S & F LED flood light fitting of 170 watt in epoxy powder coated pressure die-cast aluminium housing with, BIS marked electronic driver duly enclosed of approved brand only in housing having protection against over voltage, short circuit and open circuit and surge protection against lightening of 5 KV minimum with IP-66, protection for LED and control gear compartments with high power LED chips suitable for voltage band 120 volts to 270 volt, power factor 0.95 (minimum) having efficacy 100 lumens/watt all as specified and directed by Engineer-in-Charge.

S & F in replacement LED street light luminaire of 35 watt in epoxy powder coated pressure die-cast aluminium housing of standard size, BIS marked electronic driver of approved brand only in housing having protection against over voltage, short circuit and open circuit and surge protection against lightening IP-66, protection for LED and control gear compartments with high power LED chips suitable for voltage band 120 volts to 270 volt, power factor 0.95 (minimum) having efficacy 100 lumens/watt. Brand name should be embossed on fixture to ensure Indian brand only all as specified and directed by Engineer-in-Charge.

Supply and fixing post top lantern LED type 20 watt 230 watt volts AC outdoor type with decorativepost top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete. complete all as specified and directed by Engineer-in-Charge.

S & F LED flood light fitting of 120 watt in epoxy powder coated pressure die-cast aluminium housing with, BIS marked electronic driver duly enclosed of approved brand only in housing having protection against over voltage, short circuit and open circuit and surge protection against lightening of 5 KV minimum with IP-66, protection for LED and control gear compartments with high power LED chips suitable for voltage band 120 volts to 270 volt, power factor 0.95 (minimum) having efficacy 100 lumens/watt all as specified and directed by Engineer-in-Charge. Note for Srl No. 1 to 6 :- (i) All LED fittings shall have supporting LM-79 & LM-80 test certificate from govt approved NABL accredited Lab showing all the parameters duly signed by the local office bearer of manufacturer. (ii) All LED fittings shall have 2 years written Warranty from local office bearer of manufacturer.

M&L of GI pipe medium grade 40mm dia 1.2 mtr long bend to shape as required and fixing with two nos MS clamp of size 40x6mm for fixing of street light fitting complete all as specified and directed by Engineer-in-Charge.

Supply and fixing 1100 volt grade heavy duty single core cable PVC insulated PVC sheathed with stranded copper conductor wire FRLS of size 2 x 1.5 Sqmm and 1 x 1.5 sqmm for connection purpose, ISI marked drawing through 20mm dia PVC pipe / conduit complete all as specified and directed by the Engr-in-Charge.

Supply and laying in replacement XLPE insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 volts grade with stranded alumimium conductor of size 16 Sqmm 4 core complete all as specified.

Supply and laying in replacement XLPE insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 volts grade with stranded alumimium conductor of size 25 Sqmm 3.5 core complete all as specified..

Supply and laying in replacement XLPE insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 volts grade with stranded alumimium conductor of size 35 Sqmm 3.5 core complete all as specified..

Supply and laying in replacement XLPE insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 volts grade with stranded alumimium conductor of size 240 Sqmm 3.5 core complete all as specified..

Excavating in trenches in soft/ loose soil not exceeding 1.50 m wide and not exceeding 1.50 m in depth for foundation for pipes, walls, cesspits, manholes, pier holes, cables etc not exceeding 10 Sqm on plan getting out complete all as specified and directed by Engineer- in-Charge.

Returning, filling in, spreading, leveling, watering and well ramming in layers not exceeding 25cm thick each complete all as specified and directed by Engineer- in-Charge.

Removal of excavated soil to a distance not exc. 50m and depositing where directed at a level not exc. 1.5m above the starting point complete all as specified and directed by Engineer- in-Charge.

Material and labour for sand cushioning with a layer of fine sand 8 cm thick before laying of cable and 15 cm thick after laying of cable in trenches complete all as specified and directed. (i) Thickness of 18 cms after punning shall be considered for payment.

Material and labour for old size sub class ‘B’ bricks laid flat in trenches over the cable with length of brick perpendicular to the direction of cable, adjacent/ abutting each other, complete all as specified and directed.

All as per item No 17 above but except bricks

Supply and fixing in replacement of driver suitable for any type of street light 90 Watt complete all as specified and directed by Engineer- in-Charge.

Supply and fixing in replacement of driver suitable for any type of street light 60 Watt complete all as specified and directed by Engineer- in-Charge.

Supply and fixing in replacement of Surge protection device suitable for any type of street light 90W complete all as specified and directed by Engineer- in-Charge.

Supply and fixing in replacement of Surge protection device suitable for any type of street light 60W complete all as specified and directed by Engineer- in-Charge.

S&F in repair,installation,commissioning and testing Polycarbonate ASTA CPRI approved OEM made street light junction box Size 300 x 300 x 150mm.The junction box IP 65 & enclousers in accordance IEC 62208 with Test Report.The Manufacturer submitt report & Made of material POLYCARBONATE THERMOPLASTIC ENCLOSURES which should be UV resistance in accordance with IEC 61439-1,clause 10.2.4,anti-acid,anti-corrosive & Fully Transparent Door for vision.Degree of protection against mechanical load should be IKO8 (5 Joule) in accordance with IEC 62262.Junction Box rated insulation voltage 1000V A.C.The manfacturer CPRI TEST REPORT IN POLYCARBONATE OEM,channel partner or sister concerned assembly will not accepted.Polyurethane gasket internally embedded and Enclouseres make Hensel/Clipsal.The Enclouser Self Closeable with hinged on uper side with Protection IP66.The manfacturer of panel SHALL submit a copy of TYPE TEST REPORT of a board made out of Polycarbonate thermoplastic in accordance with IEC 60439-1.Each board shall have individual routine test report of the manfacturer.The panel should passed glow wire test 960oC in accordance with 60695-2-11 (flame retardant and self extinguishing).The Junction with 4 Nos Connectors and One Number MCB SP 6A 'C' Curve Provided 2 Nos Suitable Cable Glands with protection IP 66,Mounting Clamp and all Accessories Provided complete all as specified and directed by Engineer- in-Charge.

M & L for inreplacement MCCB 63 Amps, 4 pole, with adjustable thermal release, ICS=ICU=100%, 415 volts, 50 HZ, 16 KA complete all as specified & directed by Engineer-in- charge.

M & L for replacement MCCB 100 Amps, 4 pole, withadjustable thermal release, ICS=ICU=100%, 415 volts, 50 HZ, 25 KA complete all as specified & directed by Engineer-in- charge.

M & L for inreplacement TPN MCB,4 pole 240 Volts, 50 Hz, having rupturing capacity 10 KA, of rating 40 to 100 Amps complete all as specified & directed by Engineer-in- charge.

M&L MCB SPN 32 Amps, 10 KA, C-curve complete all as specified and directed by Engr-in-charge.

M&L MCB SP 6 TO 32 Amps, 10 KA, C-curve complete all as specified & directed by Engineer-in- charge.

M&L painting of cement concrete poles with junction box,clump and bracket any type of size externally above foundation with two coats of synthetic enamel paint over a coat of primer after scraping/cleaning well the existing surface with black and white strips 30cm each up to 1.5 metre height from top of PCC foundation block and numbering of poles with synthetic enamel paint white in 80mm high letters over 150mm x 230mm yellow base complete all as specified and directed by Engr - in - Charge.

M&L painting of LT Steel tubular pole with junction box,clump and bracket any type of size externally above foundation with two coat of aluminium paint over a coat of red oxide primer after scraping/cleaning well the existing surface incl painting of bottom with black white or yellow color strip 30cm each upto 1.5 mtr high from top of PCC foundation block and numbring of pole with synthetic enamel paint white in 80mm high letter over 150mmx230mm yellow base complete all as specified and directed by Engineer-in-Charge.

Supply and fixing galvanised pipe light grade of ISI marked 80 mm bore for passing of cable fixed to poles/walls/lay under floor complete with and including fittings as required compete all as specified and directed by Engr-in-charge.

Supply and fixing galvanised pipe light grade of ISI marked 50 mm bore for passing of cable fixed to poles/walls/lay under floor complete with and including fittings as required compete all as specified and directed by Engr-in-charge.

Supply only insulation LT tape size normal width 20mm Length 25 Mtr Thickness 0.125mm complete all as specified and approved.

Supply and fixing in replacement of PVC spacer/separators on LT OH line conductor for 4 wire including necessary nuts, bolts and fixing properly on ACSR conductor complete all as specified and directed by Engr-in-Charge.

Supply and laying in replacement XLPE insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 volts grade with stranded alumimium conductor of size 25 Sqmm 4 core complete all as specified.

Supply and laying in replacement XLPE insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 volts grade with stranded alumimium conductor of size 35 Sqmm 4 core complete all as specified.

Supply and laying in replacement XLPE insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 volts grade with stranded alumimium conductor of size 70 Sqmm 4 core complete all as specified.

Supply and fixing in replacement of driver suitable for any type of street light 150 Watt complete all as specified and directed by Engineer- in-Charge.

Supply and fixing in replacement of Surge protection device suitable for any type of street light 150W complete all as specified and directed by Engineer- in-Charge.

S&F in repair,installation,commissioning and testing Polycarbonate ASTA CPRI approved OEM made street light junction box Size 217 x 253 x 115mm.The junction box IP 66 & enclousers in accordance IEC 62208 with Test Report.The Manufacturer submitt report & Made of material POLYCARBONATE THERMOPLASTIC ENCLOSURES which should be UV resistance in accordance with IEC 61439-1,clause 10.2.4,anti-acid,anti-corrosive & Fully Transparent Door for vision.Degree of protection against mechanical load should be IKO8 (5 Joule) in accordance with IEC 62262.Junction Box rated insulation voltage 1000V A.C.The manfacturer CPRI TEST REPORT IN POLYCARBONATE OEM,channel partner or sister concerned assembly will not accepted.Polyurethane gasket internally embedded and Enclouseres make Hensel/Clipsal.The Enclouser Self Closeable with hinged on uper side with Protection IP66.The manfacturer of panel SHALL submit a copy of TYPE TEST REPORT of a board made out of Polycarbonate thermoplastic in accordance with IEC 60439-1.Each board shall have individual routine test report of the manfacturer.The panel should passed glow wire test 960oC in accordance with 60695-2-11 (flame retardant and self extinguishing).The Junction with 4 Nos Connectors and One Number MCB SP 6A 'C' Curve Provided 2 Nos Suitable Cable Glands with protection IP 66,Mounting Clamp and all Accessories Provided complete all as specified and directed by Engineer- in-Charge.

M & L for in replacement MCB TPN , 240 Volts, 50 Hz, having rupturing capacity 16 KA, of rating 16 to 32 Amps complete all as specified & directed by Engineer-in- charge.

M&L PCC (1:2:4) type B-1 using 20mm graded stone aggregate as in coping of poles etc. with slightly rounded or chamfered angles including necessary form work and fair finishing the exposed surface without using extra cement complete all as specified and directed by Engineer-in-Charge.

shri ram enterprises

J H CONSULTANTS

R K ENTERPRISES

PAWAN KUMAR GOVT. CONTRACTORS