Fixing of LED flood lights in corridor at F and V Market Keshopur

Amount

Installation, Testing and commissioning of LED flood light fittings of 100 watts on wall/beam surface with the help of fasteners, complete in all respect.

Supply and Fixing of MCCB Enclosure on surface/wall mounting with one no. 200A four pole, 36KA breaking capacity MCCB make of havells, complete with connections, testing and commissioning etc. as required. The enclosure should be made of CRC sheet with 2 mm thickness. The enclosure should be made of 'G' Frame FP. The box to be fixed on wall with proper fastners, bolts and washers as required and make connections with required cables between mccb and bus bar chamber with help of thimbles and brass compression gland. Enclosure Make:- Havells, Model:- IHEGFP

Supply and Fixing of surface/wall mounting busbar chamber with single door, 4 way copper bus bar of 200A each, Busbar made of ETP Grade Copper. The door should be locable arrangement from brass allen key, the CRC sheet should be 2 mm thick, The box should be covered from top with CRC sheet in view of protect the bus bar box to rain. The box to be fixed on wall with proper fastners, bolts and washers as required. Make:- Havells, Model:- IHBC020004.

Supply and Fixing of surface/wall mounting Onload Changeover Switch capacity of 100A in sheet enclosure, 415 V AC, 50 Hz. Enclosure made of CRC sheet should be 2 mm thick with single door with locable arrangement from brass allen key. The box to be fixed on wall with proper fastners, bolts and washers as required and make connections with required cables/wires between bus bar chamber and onload changeover with help of thimbles and brass compression gland. Changeover Make:- Havells, Model:- IHBFFE0100

Supply and Fixing of surface mounting MCB box enclosure size of 200x140x95 mm deep inside dimension made of SMC with door should be locable arangement from brass allen key. The box shall be contain one number 'B' Series 6-32A SPMCB with 2 way backlite wire connector. The box to be fixed on wall with proper fastners, bolts and washers as required and make connections with required cables/wires as required.

Supply of G.I. wire rope of 6 SWG for holding electrical cable.

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.

3 X 10 sq. mm (22mm)

4 X 35 sq. mm (32mm)

3 X 95 sq. mm (38mm)

Painting of existing street light poles 10 mtr long approx with two or more coats of aluminium paint i/c rubbing with sand paper as required.

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required.

Upto 35 sq. mm (clamped with 1mm thick saddle)

Above 35 sq. mm and upto 95 sq. mm (clamped with 25x3mm MS flat clamp)

Supply of 9 mtr high galvanised octagonal pole 70/155mm, 3mm thick sheet and base plate of size 250x250x16mm.

Erection of metallic pole of above 8.0 metre and upto 10.0 metre length in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required.

Shaka Electrical (India)