Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹15.8 LAccepted-AOC 1010 NANDANPURA BABINA CANTT DIST JHANSI 284401 | BABINA CANTT | JHANSI | UTTAR PRADESH | 284401 | L1 | Accepted-AOC Accepted | |
| 2 | L2₹17.5 L+₹1.7 L (10.5%)Rejected-AOC VILL PO BUNGWAN KALAN TALBEHAT LALITPUR UTTAR PRADESH 284136 | TALBEHAT | LALITPUR | UTTAR PRADESH | 284136 | L2 | Rejected-AOC Rejected | |
| 3 | L3₹20.0 L+₹4.1 L (26.0%)Rejected-AOC VILLAGE TAPARIYAN BABINA CANTT BABINA JHANSI UP 284401 | BABINA | JHANSI | UP | 284401 | L3 | Rejected-AOC Rejected | |
| 4 | L4₹21.7 L+₹5.8 L (36.6%)Rejected-AOC NEAR PUMP HOUSE ROAD NEAR RED ROSE SCHOOL BABINA CANTT JHANSI DISTT UP 284401 | JHANSI | UTTAR PRADESH | 284001 | L4 | Rejected-AOC Rejected |
Tender Value
₹27.1 L
EMD Value
₹54,140
Closing Date
16 Jan 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE JHANSI
HQ CWE JHANSI
SPL REPAIR TO CERTAIN ROADS UNDER GE BABINA
2022_MES_569113_1
CWE/JHA/BAB/TOKEN/65 OF 2022-23
Open Tender
Civil Works - Roads
Item Rate
180 days
BABINA
As per tender documents
9 documents required · 9 mandatory
₹500
GE BABINA
₹54,140
Yes
4 Feb 2023
14 Dec 2022
23 Jan 2023
14 Dec 2022
16 Jan 2023
28 Dec 2022
Amount
M&L Scarifying or picking graveled macadam or bituminous macadam surface in area n.exc 400 Sqm and depth n.exc 75 mm deep and removing n.exc 50 mtr complete all as specified and directed.
M&L,7.5cm thick (compacted thickness) WBM with granite, trap or basalt coarse aggregate of grading 2 (63 to 40mm) or of grading 3 (50 to 20mm) spread, rolled and consolidated to gradient material and camber required with 8 to 12 tonne power roller complete all as specified and directed.
All as per Ser item No 2 but except material (Material obtained from Sl No 01 shall be used) complete all as specified and directed.
M&L, Preparing unsurfaced WBM by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally faning the cleaned surface with gunny bags to remove all loose dirt etc complete all as specified and directed.
Repairs to pot holes any depth exceeding 30mm depth, area not exc 1sqm each including sweeping free from dust & mud or water scoring sunken surfaces in roads paths etc, cutting around edges to at least 25mm in depth making good by applying tack coat with paving bitumen @ 5kg/10 sqm putting in pre mixed bituminous macadam, well rammed and sealed with binder 9.8 kg/10 sqm, blinded with 0.09 cum of stone chipping ,6.3 mm size and again well rammed (including supply of premixed macadam binder and chippings) depth of pot holes exe 30 mm complete all as specified and directed.
M&L, applying evenly a tack coat of bitumnous primer at 10 Kg per 10 Sqm with using bitumen VG-10 and M&L for providing bituminious premix asphaltic semi dense concrete (40mm thick) consolidated thickness with 5.5% binder content by wight of total mix , with using paving bitumen VG-30 laid / spread uniformly by means of pavers over primed WBM surfaces, rolled and compacted to required camber and gradient complete with 8 to 12 tonne power roller complete all as specified and directed.
M&L for preparing old black top surface of road and applying evenly a priming tack coat @ 5 kg per 10 sq m with using paving bitumen VG-10 complete all as specified and directed.
M&L for providing bituminious premix asphaltic semi dense concrete (30mm thick) consolidated thickness with 5.5% binder content by wight of total mix , with using paving bitumen VG-30 laid / spread uniformly by means of pavers over primed black top surfaces, rolled and compacted to required camber and gradient complete with 8 to 12 tonne power roller complete all as specified and directed.
M&L for premix bituminous macadam laid / rolled and compacted to required gradient and hcamber and (consolidated thickness 75mm or less) using 4% paving bitumen by weight or total mix complete all as specified and directed.
M&L for preparing bituminous surfaces of road and marking 2.5mm thick centre lines, stop lines, dashes, arrows etc. and the like n.exc 10cm wide on roads pavements with hot allied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturers instruction complete all as specified and directed.
Supply and fixing in repair cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions complete all as specified and directed.
S&F sand stone patties in edging of rough squared stones of size 50mm thick, 300mm depth and 60cm long each pattie, length of stone patti shall be laid parallel to the road length, jointed struck flush including necessary excavation, earthwork, returning filling and removal complete all as specified and directed.
Demolition of stone sett paving laid with concrete bed and removal complete all as specified and directed .
M&L,100mm thick soling or sub base with broken boulders or quarried stone, inter stices filled, surface formed and rolled and consolidated to required camber and gradient complete all as specified and directed.
M&L,150mm thick (compacted thickness) WBM in two layers, each 75 mm thick with stone coarse aggregate of grading 2 (63 to 40mm) spread, rolled and consolidated to gradient material and camber required complete all as specified and directed.
M&L cement concrete work in pavement / hard- standing of flexual strength 40kg/per square centimetre in field using 400kg of cement per cubic metre, thickness of concrete 20cm or less including form work complete all as specified and directed.
M&L stone sett flooring with stone setts of size 200 to 250mm long, 150 to 200mm wide the 150mm deep and sides dressed; bedded in cement mortar 1:3, 20mm thick; joints grouted in cement mortar 1:2 with an admixture of metallic floor hardner, 5% by weight of cement and struck flush complete all as specified and directed
M&L moorum/red bajri for berms including spreading, levelling, watering and rolled with power roller of 5 to 8 tonne capacity to required camber and gradient complete all as specified and directed.
Rolling over moorum 2 to 5 tonne roller complete all as specified and directed.
M&L for preparing black top surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning to cleaned surfaces with air compressor to remove all loose dirt etc and making true dust free surface, applying evenly a priming / tack coat with bituminous primer (paving bitumen VG-10) @ 5 kg per 10 sq metre on existing black top and providing bituminous semi dense concrete (design mix) 30 mm consolidated thickness using 5.5% of binder content by weight of total mix, using paving bitumen VG-30 laid / spread uniformly by means of mechanical paver over black top surfaces and rolled with 8 to 12 tonne power roller and compacted to required camber and gradient complete all as specified and directed.
Scarifying or picking gravelled, WB macadam or bituminous macadam surfaces in area exc 400 sqm and exc 50mm but n exc 100 mm deep and all other as per direction of engineer in charge.
M&L for 7.5cm thick (compacted thickness) WBM, with coarse aggregates of grading 2 (63 to 40mm size) or of grading 3 (50 to 20mm size), spread, rolled and consolidated to gradient and camber required (of grading as specified) type of stone granite/trap /basalt and including screening with moorum, watered, consolidated and compacted each layer separately to the required gradient and camber with 8 to 10 tonne power roller complete all as specified and directed.
M&L for paving bitumen evenly a priming/tack coat with bituminous primer at 10 kg per 10 sqm meters on WBM surface and all other as per direction of Engineer in charge.
M&L for providing bituminous semi dense (design mix) 40mm consolidated thickness using 5.5% of binder content by weight of total mix, using paving bitumen VG-30 laid/spread uniformly by means of mechanical paver over black top surfaces and rolled with 8 to 12 tonne power roller and compacted to required camber and gradient complete all as specified and directed.
M&L Moorum / red bajri filling in floors / pavings, laid in layers not exe 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed.
M/S A.R BUILDERS
M/S Kharya Associates
M/S Ritu Tandon
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .