Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹34.3 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹35.0 L+₹65,124.80 (1.90%)Rejected-Finance | L2 | Rejected-Finance Other than L1 | |
| 3 | L3₹38.5 L+₹4.2 L (12.2%)Rejected-Finance 96 SHASTRI NAGAR SHASTRI NAGAR JAMMU JAMMU KASHMIR 180004 | JAMMU | JAMMU AND KASHMIR | 180004 | L3 | Rejected-Finance Other than L1 | |
| 4 | L4₹39.0 L+₹4.6 L (13.5%)Rejected-Finance | L4 | Rejected-Finance Other than L1 | |
| 5 | L5₹39.3 L+₹5.0 L (14.5%)Rejected-Finance 5 A LANE 1 GREATER KAILASH JAMMU J K 180011 | JAMMU | JAMMU AND KASHMIR | 180011 | L5 | Rejected-Finance Other than L1 |
Tender Value
₹46.8 L
EMD Value
₹93,500
Closing Date
8 Aug 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Satwari
GE Satwari Jammu
SPL REPAIR TO BLDG NO T 80 BGC P 3/11C P 3/01 OF FD REGT RAIPUR SATWARI AND BLDG NO P 7/77 SINGLE JCOS ACCN OF IDSR AND CERTAIN MINOR WORK UNDER GE SATWARI
2022_MES_535502_1
GEJM-29/2022-23
Open Tender
Civil Works
Item Rate
270 days
Satwari Cantt
D Class Cat a i b i
9 documents required · 9 mandatory
₹500
GE Satwari
₹93,500
Yes
9 Feb 2023
4 Jul 2022
9 Aug 2022
4 Jul 2022
8 Aug 2022
2 Aug 2022
Amount
Taking down shutters of any description exc 1.00 Sqm and n.exc. 2.00 sqm each and removing from the site all as specified & directed.
Taking down chowkats or frames with shutters (without taking off shutters from the frame) area not exc. 1.5 Sqm including making good of jambs of opening with rendering in cement mortar 1:4, complete all as specified and direcetd.
Taking down chowkats or frames with shutters (without taking off shutters from the frame) area exc. 1.5 Sqm but n exc 4.0 sqm including making good of jambs of opening with rendering in cement mortar 1:4, complete all as specified and direcetd.
S&F pressed steel frames of size 125mm x 60mm made out of size 1.25mm thick MS sheet for doors single rebated including mild steel hinges medium weight 100 mm long and 25mm x 3mm flat iron in holdfast,tie bar including necessary fixing lugs, hold fast, lock strike plate and fixing arrangement etc complete as specified and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-1 including PCC 1:3:6 as in back fill to chowkats all as Specified.
S&F pressed steel frames of size 105mm x 60mm made out of size 1.25mm thick MS sheet for doors double rebated including mild steel hinges medium weight 100 mm long and 25mm x 3mm flat iron in holdfast,tie bar including necessary fixing lugs, hold fast, lock strike plate and fixing arrangement etc complete as specified and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-1 including PCC 1:3:6 as in back fill to chowkats all as Specified.
M&L for 35mm thick 2nd class HW factory made plain framed, panelled shutter (two panel) with lock rail and panel of 9mm BWP commercial ply. The size of rail and stile as per IS:1003 (Part-I),all as directed by Engr-in-Charge.
Supply and fixing 35mm thick 2nd Class hard wood gauzed and skelton shutters open rebated and prepare to receive glass, gauge etc but divided into squares with plain chamfered or rounded mitred and rebated sash bars, stiles and rails as specified in SSR Part-I Sec 8 clause 8.24 (a) complete all as specified
S&F Flush shutters, 30 mm thick solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified. Note :- Sampel approved by Engr-in-Charge or GE.
S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm Plain colour PVC sheet reinforced with mild steel square tube, supplying and fixing in opening as per specifications and drawing including making good to disturbed surface of walls, complete all as specified and as directed by Engr-in-Charge.
S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppplying and fixing in the frame at site as per specification & drawing complete all as specified and as directed by Engr-in-Charge.
Pressed steel cup board frame of MS sheet 1.25 mm thick size of frame 60 x 40 mm with rebate of 20 mm wide and 12 mm deep including PCC 1:2:4 as in filling to back of chowkats including butt hinges 100 mm long. Piano hinges measured separately.
Prelaminated MDF board 19 mm thick as in shutters/shelves (exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame worknincluding lipping (15 mm thick three sides and 20 mm thick lipping hinge side) around the shutter complete all as specified and as directed by Engr-in-Charge.
S&F 100mm size Stainless steel handle complete all as specified and as directed.
S&F in repair continuous (piano) hinges, heavy duty mild steel, bright finish or electrogalvanised sutable for 19mm thick shutter and fixed, complete all as specified. ( ISI Marked)
S&F butt hinges of mild steel cold rolled medium weight of size 100mm as specified.
Supply and fixing for stainless steel Butt hinges, 100mm , complete all as specified and as directed
S&F Aluminium anodised, barrel tower bolts size 150 mm of extruded section and fixed complete all as specified. (ISI Marked)
S&F Aluminium handles, fabricated type, anodised Size-125mm, anodised section and fixed complete all as specified. (ISI Marked)
S&F Aluminium alloy, anodised, sliding door bolt Size- 250 mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified.
S & F hasp & staple safety type aluminium anodised with mild steel hinges Spin including bolt to hinges plate fixed with screws of 75 mm in length.
S&F aluminium hanging floor door stopper,Twin rubber stopper,size 100mm , anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.
M&L for 50 mm magnetic catches with brass body and striking plate including letting in as fixed complete all as specified and directed.
S&F in repair aluminium bottom door seal with brushes, length 1.2 mtr, fix with screw, suitable for wooden door complete all as specified.
Supply and fixing in repair mild steel helical ordinary rat tail rod pattern springs 300mm including roller and roller plate complete including fixing to pressed steel frames necessary welding work all as specified and as directed.
S&F in repair 25mm outer dia stainless steel decorative drapery rod of thickness 20 gauge and for every 01 RM length, with stainless steel brackets near to ends with stainless steel finials for 25mm dia drapery rod at both ends. The drapery rod shall be projecting 150 mm outer side from the clear opening of doors/windows. ( Including necessary fittings)
Material & labour factory made steel windows double shutter box type, outer frame made out of ERW TUBE 'P' section(60x45x25mm) and shutters of ERW TUBE 'P' section (50x35x20mm) operable shutters side hung includding pistol hinges with two Nos of MS Tower bolts 150mm size on each shutter steel handle and stopper of 'Z' section as specified complete with sash bars devetailed or welded ready for glass fixing and wire gauzed fixing with suitabel fittings/openning for cooler/AC where required .Steel windows will be double shutter external glazed and internal wire gauzed complete all as specifed and as per Drg No CEPZ/TD-324/07 1/3 to 3/3 all as specified and directed by Engr-in-Charge. NOTE: The quoted rate against the above item shall also include (i) for Provn of one shop coat of zinc chromate primer on all exposed steel surfaces and one coat of coal tar on the ends of steel frame in contact with brick/conc surface (ii) 04 Nos MS Steel lugs of 20x5mm MS flat 20cm long over all welded to frames (iii) PCC block for embedding lugs.
Ditto as per above item no 26 but in ventilators any size
S&F Mild steel works of flat iron, square bar, round bars etc. as in framed work such as grills, guard bars, gratings etc incl bending, cutting and welding as necessary of confirming to Gde Fe 310-0 all as specified.
S&F 4 mm thick sheet glass ordinary quality glazing with oil putty or any type of beads in square n.exc. 0.5 Sq each pane in any type of frame of iron/Steel/Wood/Aluminium as required at site complete all as specified (upto fourth storey with necessary scaffolding), all as specified.
S&F 4 mm thick figured glass, pin head type and glazing with oil putty or any type of beads in square n.exc. 0.5 Sq each pane in any type of frame of iron/Steel/Wood/Aluminium as required at site complete all as specified (upto fourth storey with necessary scaffolding), all as specified.
Supply and fixing Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified fixed with stainless steel wire staples.
Supply and fixing in repair Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified fixed with stainless steel wire staples.
S&F in repair CP Bib taps, fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed all as specified complete all as specified. Make:- Jainko, Essco,Parko, Prayag
S&F in repair angle valve with wall flange , cast copper alloy, chromium plated fancy type screwed for 15 mm iron pipe, complete all as specified. Make:- Jainko,Essco,Parko, Prayag.
S&F in repair Stop valves, cast copper alloy,fancy type, chromium plated with long shank and cup (concealed type) screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed, complete all as specified. Make:- Jainko,Essco,Parko, Prayag.
S&F in repair CP Pillar taps, cast copper alloy, with capstan heads, chromium plated, fancy type, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified. Make:- Jainko,Essco,Parko, Prayag
S&F in repair Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified. Make:- Jainko,Essco,Parko, Prayag
S&F in repair Chromium plated, towel ring , complete all as specified. Make:- Jainko,Essco,Parko, Prayag
S&F in repair Toilet paper holder with flat recessed type stainless steel complete all as specified and directed. Make :- Jainko,Essco,Parko, Prayag
S&F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long . Complete all as specified. Make :- Jainko, Essco, Parko, Prayag
S&F in repair PVC connection 15 mm x 600 mm including brass check nut at both ends screwed for iron pipe of 15 mm bore. Make :- Jainko, Essco, Parko, Prayag
S&F in repair Brass chromium plated shower rose with or without swivel joints, 125mm size, including fixing to steel pipe or union Make :- Jainko, Essco, Parko, Prayag
S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. complete all as specified. Make :- Jainko, Essco,Parko, Prayag
S&F in repair Vitreous Cliina wash basin, angle back,( Corner type) size 600x480mm white, excluding taps, waste, chain and plug and porcelain stopper but including brackets including CP coupling complete all as specified and approved by Engr-in-charge/GE. Make:- Cera, Hindware, Jaquar.
S&F waste coupling of chromium plated brass 32 mm dia with long screwed shank and fly nuts complete as suitable for wash hand basin all as specified . Make :- Jainko,Essco,Parko, Prayag
S&F in repair PVC valveless,syphonic action type, flushing cistern, low level,white with inlet, ball valve, float and handle including brackets, PVC 32 mm 'L' bend of capacity 10.0 litres and making good to dismantled/damaged floor/surfaces, fixing in repair, complete all as specified and as directed by Engineer-in-charge. Make:- Cera, Cat No- B1010109 ( CONGO) or equivalent in Jaquar/ Hindware.
Supply and fixing in repair Vitreous china ware pedestal type water closet white, with 'P' or 'S' trap including self closing seat cover, closed pattern with flat bottom,complete all as directed. (Rate of including in taking out and removal of old WC seat unhygienic condition Make:- Cera, Cat Part No- S1053101 or equivalent in Jaquar/ Hindware.
S&F in repair stainless steel lock grating plain/hole size 100 mm dia including embeding in tiles with white cement. Make:- Jainko Cat No :-SGJ-4 or equivalent in Essco, Parko.
Supply and fixing in repair PVC Waste pipe 32mm bore of required length complete .Make: Prayag Cat No 329 or equivalent in Polytuf/ Jindal.
Supply and fixing in repair Rotational moulded polyethylene water storage tanks of 500 litres capacity,(cylindrical vertical with closed top) with plastic lid cover, triple layered, white, hoisted and fixed in position all as specified in SSR Part-I including PTMT Ball valves high pressure with epoxy coated Aluminium rod & high density plastic ball complete, screwed for iron pipe or brass ferrule and fixed for 20 mm bore pipe, including making connections complete all as specified.
Disconnecting existing tanks, 500 ltr setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately) complete all as specified.
Supply and fixing in repair Gun-metal, globe or gate valves, with iron wheel head,screwed both ends for iron pipe of 20 mm bore pipe, including making connections complete all as specified and fixed.
Supply and fixing in repair Gun-metal, globe or gate valves, with iron wheel head,screwed both ends for iron pipe of 15 mm bore pipe, including making connections complete all as specified and fixed.
Taking up or down steel tubing of 15 mm bore pipe and connections,including cleaning for re-fixing or removal to store, complete all as specified and as directed.
Taking up or down steel tubing of 20 mm bore pipe and connections,including cleaning for re-fixing or removal to store, complete all as specified and as directed.
Supply and fixing tubes 'medium grade' galvanised, 15 mm bore, ISI marked with all fitting such as bends, tees,elbows, unions,short pieces, connectors, back nuts etc and fixed complete to walls and ceilings or laid in floors, complete all as specified and as directed by Engineer-in-charge.
Supply and fixing tubes 'medium grade' galvanised, 20 mm bore, ISI marked with all fitting such as bends, tees,elbows, unions,short pieces, connectors, back nuts etc and fixed complete to walls and ceilings or laid in floors, complete all as specified and as directed by Engineer-in-charge.
M&L cutting chases, pinning in , making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings,steps,cills,sunshades,shelves,lintels etc,and cutting chases for concealed water tubing or concealed conduit wiring,etc,and making good,cutting n.exc 10cm girth in brick walls.
Dismantling PVC/Cement/CI pipes 50 to 110 mm dia including all fittings like bend,branch pieces, connectors, heel rest bend etc and removing from site all as specified and directed
Supply and fixing UPVC (SWR) type B pipes 110 mm bore single socketed in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and as directed by Engineer-in-charge. Make -Astral,Supreme, Finolex
Supply and fixing UPVC (SWR) type B pipes 110 mm bore single socketed, in any length with rubber ring joints fixed to walls including stack clamp of GI flat 30mm wide 2mm thick fixed to wall with nail at spacing of 1m center to center , complete all as specified and as directed by Engineer-in-charge.Make -Astral,Supreme, Finolex
Supply and fixing UPVC (SWR) type B pipes 75 mm bore single socketed in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and as directed by Engineer-in-charge.Make -Astral,Supreme, Finolex
Supply and fixing UPVC(SWR) type B pipes 75 mm bore single socketed, in any length with rubber ring joints fixed to walls including stack clamp of GI flat 30mm wide 2mm thick fixed to wall with nail at spacing of 1m center to center , complete all as specified and as directed by Engineer-in-charge.Make -Astral,Supreme, Finolex
Supply and fixing, UPVC (SWR) , bends for 75 mm bore , complete all as specified and as directed by Engineer-in-charge.Make -Astral,Supreme, Finolex
Supply and fixing, UPVC (SWR) , bends with access door for 75 mm bore , complete all as specified and as directed by Engineer-in-charge.Make -Astral,Supreme, Finolex
Supply and fixing, UPVC(SWR) , bends for 110 mm bore complete all as specified and as directed by Engineer-in-charge. Make -Astral,Supreme, Finolex
Supply and fixing, UPVC(SWR) , bends with access door, for 110 mm bore complete all as specified and as directed by Engineer-in-charge. Make -Astral,Supreme, Finolex
Supply and fixing, UPVC(SWR), junction single, (single 'T') with access door equal or unequal for 110 mm bore , complete all as specified and as directed by Engineer-in-charge. Make -Astral,Supreme, Finolex
S&F UPVC (SWR) , reducers 110 mm dia complete all as specified. Make:- Astral, Supreme, Finolex.
S&F UPVC (SWR) vent cowl 75 mm dia complete all as specified. Make -Astral,Supreme, Finolex
Supply and fixing in repair UPVC (SWR) floor trap plain with grating having dia meter of out let 75mm including jointing with solvent cement to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed. Make -Astral, Supreme, Finolex
S&F in repair, UPVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified. Make -Astral, Supreme, Finolex
Demolition of brick work built in cement mortar or cement lime mortar incl all quoins, arches pillars etc and removing unserviceable material from the work site ouside defence premises complete all as specified.
Brick work with subclass 'B' bricks, old size bricks, straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1:6 complete all as specified and as directed by Engineer-in-charge
Brick work with subclass 'B' bricks, old size bricks, straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1:6 but except bricks complete all as specified and as directed by Engineer-in-charge
M&L for Brick work with subclass 'B' bricks, old size bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and as directed by Engineer-in-charge.
Material and labour for Providing, cement concrete 1:2:4 type B-1 (using 20mm graded aggregate ), in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed
Demolition of cement concrete (unreinforced) ground floor to 4th floors and pavings n exc 15 cm thickness (below or above ground level ) and removing the rubbish from the work site out side defence premises complete all as specified.
Dismantling floor, hearth or wall tiling including cement mortar bedding, terrazo dado from wall surface (but not backing), removing serviceable tiles to store and rubbish off the premises. Complete all as specied and directed.
Material and labour glazed ceramic coloured Digital tiles in vertical surface 300x450x7 mm thick, set and jointed in neat cement slurry and pointed white or colored cement to match the surface over and including 10 mm thick CM 1:4 all as specified. Make : Somany, Kajaria, Sunhearrt (Sample as approved & Kept in GE's sample room)
Material and labour Non - skid Digital Ceramic joint less coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm , in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match and set in neat cement slurry and pointed with coloured/white cement to match the surface over and including 15 mm thick screed bed in CM 1:4. Make : Somany, Kajaria, Sunhearrt ( sample as approved & kept in GE's sample room)
Description all as item No 81 but as in vertical surfaces dado/skirting over a backing coat of CM 1:4, 10 mm thick complete.
Material and labour Vitrified Ceramic (Double Charged) edge cut joint free coloured or printed any shade tiles 10 mm thick (square/ rectangular) polished area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm , in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match and set in neat cement slurry and pointed with coloured/white cement to match over and including 15 mm thick screed bed in CM 1:4. Make Somany, Kajaria, Sunhearrt (Sample as approved & Kept in GE's sample room)
Description all as item No 83 but as in vertical surfaces dado/skirting over a backing coat of CM 1:4, 10 mm thick complete.
M&L 16 to 18 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, over 15 mm thick CM 1:4 as directed by Engr-in-charge.
M&L Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified.
Material and labour 75mm thick PCC 1:2:4 type C-1 using 40mm graded crushed stone aggregate as in floor/ plinth protection laid in alternate bays finished even and smooth without using extra cement including joints filling by using mastic filling comprising one part of bitumen 85/25 mixed with three parts of coarse sand by weight complete all as directed.
M&L for Plain cement concrete (1:3:6), type C-2 (using 40 mm graded crushed stone aggregate) nominal mix, 75 mm thick, as in sub base of floors, finished even and fair complete all as specified and as directed by Engineer-in-charge.
M&L for 25 mm thick cement concrete 1:2:4, type B-0, (using 12.5 mm graded crushed stone aggregate) as in sub base/ levelling course of floors, finished even and fair complete all as specified and directed.
Demolition of Cement concrete terracing including felt in any description and in any position over roof and removing the rubbish from the work site out side of defence permises
Complete removal of existing water proofing treatment of any description incl under layer, taking down of cement plaster any thickness and removal of debris off the premises including grubbing up of trees and preparation of concrete surfaces by scrubbing down with steel brushes and cleaning with water to remove all loose dirt/dust.
M&L for P.C.C 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in padding over roof finished and laid to required slope complete all as specified and as directed.
M&L Rendering 15mm thck in CM 1:4 on Concrete surfaces of roof finished fair & evenr and including mixing of water proofing compound (WPC shall be measured and paid separately)
M&L for water proofing treatment in the following sequences:- (a) Applying 1st course of bituminous primer conforming to IS -3384 @ 0.4 Kg/Sqm cover the surface till the surface properly impregnated and insolvent oil primer evoporate completely (b) Applying 2nd coat of blown 85/25 graded bitumen confirming to IS 702 @ 1.2 Kg/sqm. (c) Applying 3rd course of APP (Atactic Polypropylene) modified polymeric membrane 3 mm thick weight not less than 3.6 Kg/Sqm with 160 Grams/Sqm non woven polyester made at centre core reinforced laid with 75 mm side overlap and 100 mm overlap. The membrane has to be laid with LPG torch and overlap sealed and finished neat complete all as specified and as directed .
M&L for preparation of newly sufrace of APP Membrane and applying two coats of water based bituminious alumunium paint @ 200 ml per sqm etc complete all as specified and as directed
Cutting grooves in brick wall, 75 mm wide and 65 mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and as directed by Engineer-in-charge.
Supply only Water proofing compound liquid.
Taking down cement plaster of any description on brick or stone walls or from concrete surface including raking out joints, hacking for key, scrubbing down with water etc, and removing unserviceable material outside cantt area, complete all as specified.
Material and labour rendering 15 mm thick on fair faces of brick or concrete surface walls, in cement mortar 1:6 , rendering is to be finished even and smooth without using extra cement complete all as specified and as directed.
Rendering 10mm thick on fair faces of brick or concrete surface walls, in cement mortar 1:6 , rendering is to be finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-charge.
Rendering 15 mm thick on other than fair faces of brick or concrete surface walls, in cement mortar 1:4 , rendering is to be finished even and fair without using extra cement (up to 4th storey with necessary scaffolding) complete all as specified and as directed by Engineer-in-charge.
Rendering 10 mm thick on fair faces of brick or concrete surface ceilings, in cement mortar 1:3 , rendering is to be finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-charge.
M&L for repairing of concrete surfaces such as balcony, chajjas, upward or downward facias ,column, pillar, ceiling and similar items with plain cement concrete 1:2:4 type B-0 or rendering 10-15mm thick as per site requirement in CM 1:3 without using extra cement finished even and fair complete all as specified and directed (Up to fourth storey bldgs and including necessory formwork and scaffolding required as per site condition also taking down or dismantling as required at site.
M&L for applying two coat of synthetic enamel paint over a coat of red oxide primer on new steel surfaces of any description having width/girth exceeding 10 cm including preparation and rubbing with sand paper to make surface even and smooth complete all as specified.
M&L for applying two coat of synthetic enamel paint on new wooden surfaces of any description over a coat of pink primer having width/girth exceeding 10 cm complete all as specified including preparation and necessary filling by chalk putty as and where requered to make surface even and smooth.
M&L for applying one coat of synthetic enamel paint to old painted steel surfaces of any description having width/girth exceeding 10 cm complete all as specifie including preparation and rubbing with sand paper to make surface even and smooth complete all as specified and as directed.
M&L for applying one coat of synthetic enamel paint on old painted wood surfaces of any description having width/girth exceeding 10 cm complete all as specified including preparation and where requered to make surface even and smooth.
M&L for preparation of old decorated concrete/ plastered surfaces of walls, Pillars, cornices etc by booming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots & rubbing with sand paper and applying two coat of oil bound distemper on old decorated wall surface including two coats of wall care putty of 1 to 2 mm thick on uneven surface as and where required.
Material ad labour for preparation of new plastered surfaces of walls & applying two coats of oil bound distemper over two coat of wall care putty of 1 to 2 mm thick and one coat of primer complete all as specified.
M&L for preparation of new/old decorative plastered/concreat surface of wall, chajja, facia, face of columns, beam ect by booming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots & rubbing with sand paper and applying one coat of weather proof exterior emulsion (APEX) with necessary scaffoding up to 4th storey, including necessary filling of wall care putty on uneven surface as and where required all as specified.
M&L for preparation of new plastered/concrete surfaces of walls, (up to 4th sorey with necessary scaffolding) and applying two coat of cement based paint over one coat of primer complete all as per specified and directed by Engr-in-charge.
Material and labour for preparation of old decorated plastered/concrete/brick surfaces of walls ( Up to 4th storey with necessary scaffolding) and applying two coat of cement based paint on old decorated surfaces including preparation.
M&L for preparation of old decorated plastered /concrete/ brick surfaces of walls (up to 4th storey with necessary scaffolding) and applying one coat of cement based paint on old decorated surfaces including preparation.
M&L for preparation of old decorated brick /concrete plastered /un-plastered surfaces of walls, Pillars, cornices etc by booming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of lime white wash on the walls, pillars, cornices etc. complete all as specified and directed.
M&L for preparation of new decorated brick /concrete plastered /un-plastered surfaces and applying three coat of white wash on ceiling.
Material and labour for applying two coats of white wash on old surfaces of ceiling including preparation of surfaces etc complete all as specified and directed.
Demolition of reinforced cement concrete of any discription and any position( ground to 4th floors) and removing the rubbish from the work site out side defence premises complete all as specified.
M&L for RCC M-15, nominal mix, type B-1(1:2:4), using 20mm graded crushed stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and directed.
M&L for TMT mild steel bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for column, hooking end and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified and directed.
M&L for TMT mild steel bars 5 mm dia and over upto and including 10 mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips.
M&L for use and waste form work roughf finish surface to soffits of suspended slabs such as roof slabs, floor slabs landings and similar work, not exceeding 200mm thick (horizontal or sloping) for fair finished surfaces of concrete, complete all as specified and directed.
M&L for use and waste form work to edges of concrete flats, treads, break in floors, window cills, concrete railings, openings in concrete walls, floor and roof and not exc. 20cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc. 10cm but n.exc. 20cm wide for fair finished surfaces of concrete, complete all as specified & directed
M&L Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete all as specified.
Material and labour for Plain cement concrete 1:3:6 type C-2 using 40 mm graded crushed stone aggregate as in floor or paving 75mm thick and finished even and fair without using extra cement, all as specified .
M&L for 75 mm thickness PCC 1:2:4 type -B-2 (40 mm graded crushed stone aggregate) complete all as specified and directed.
Material and labour for machine cut kota stone single piece slab in staires steps & flooring 20-25mm thick, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing with mirror cut polish and including over and including screed bed or bedding layer 15mm thick in cement mortar (1:6) all as specified and directed by Engineer-in-Charge.(Note Length of Kota slab not less than width of Stair).
Material and labour for machine cut kota stone slab 20 -25 mm thick as in skirting/dado etc laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing with mirror cut polish complete over and including 10mm thick rendering in cement mortar 1:4 all as directed by Engineer-in-Charge.
Dismantling asbestos cement (Corrugated or semi-corrugated) sheets in roof covering complete all as specified and directed.
S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.
S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.
Dismantling of ceiling board (Fibre, pulp, any type of insulation etc) or insulation board / slabs/any thickness including cover fillets complete all as specified and as directed.
Supply and fixing in repair GI snap grid frame work (Grid size 605cm x 605cm) for false ceiling consisting of main runner 'T' of size 24mm x 32mm and 0.3mm thick , Secondary runner 'T' of size 24mmx25mm and 0.3mm thick,GI angle 24mmx24mm and 0.4mm thick,Bottom exposed capping of width 24 mm of all T-sections shall be of 0.25mm thick PPGI, hot dipped galvanised steel with zink coating not less than 120gm / Sqm ,ceiling grid system duly suspended by 4mm dia GI wire hanging from existing purlins /roof slab with butterfly clips including Gypsum ceiling tiles of size 595 x 595 x 7 mm laminated with 0.07 mm thick polyvinyl film on the face side and 10 micron metalized polyester film on the back side fixed on GI snap grid complete all as specified and directed by Engr-in- Charge.
Material and labour for Precast factory made chequred designer tiles (Rectified interlocking tiles) 300x300 mm glazed top made in white cement and pigment base of thickness not less than 20 mm in different colour and pattern (compressive strength not less than 250 Kg/SqCm) set and jointed in neat cement slurry(colour and pattern as per sample kept in GE office as approved by GE) including 15 mm thick screed bed in CM 1:4 . all as specified and directed by Engr-in-Charge.
Material and labour for providing precast cement concrete 1:2:4 type B-1 (using 20mm graded aggregate ), in kerb stones, kneelers, apex stones,pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, anchorage blocks, bonders with plain fair faces. including chamfers, weatherings, throatings etc. and setting in cement mortar 1:6 complete all as specified and directed. Note :- Form work required for these items included in the unit rate of this item.
M&L Aluminum Power coated, sliding windows three track with mosquito proofing with style 44.4x44.5x2mm thick including 4 mm thick coloured/tinted/frosted glass panes including all necessary fittings and fixtures complete.
M&L Anodised aluminium grills, 6mm dia size 100x100mm fixed to aluminium windows and thickness of powder coating not less than 50 micron, complete all as specified.
Dismantling timber scantlings 40 sq. cm and over in section, in any position ( framed work) complete all as specified.
S&F Rolled mid steel in Roof truss (framed),trussed,purlins,crane grantries,rails and fasternings and heavy bracket framing (Beam, tee, angle, channel or flat section) includuing distance pieces,cleats etc (Fe-410-Grade (E-250) quality-A).
Surface excavation n. exc 30cm deep and averaging 15cm deep and getting out in any type of soil complete all as specified and as directed.
Excavation in trenches n exc 1.5 m deep and n exc 1.5 m wide in any type of soil and getting out in any type of soil complete all as specified and as directed.
Returning, filling in soil incl spreading leveling watering and well ramming complete all as specified and as directed.
Removal of surplus soil n exc 50 m and deposting where directed at level n exc 25 cm in any type of soil complete all as specified and as directed.
M & L PCC 1:4:8 D-2 using 40 mm graded stone aggregate as in foundation complete all as specified and as directed.
Material and labour for hard core of broken stone or boulder of gauge not exceeding 63mm, deposited, spread and leveled in layers not exceeding 15cm thick, watered and rammed to a true surface complete all as specified and as directed.
M & L for mild steel framed work as door and gates etc as per sample of angle or other section with gusset plates, rails, braces, MS Sheet etc, complete, drilled for fixing of steel sheeting or other covering. Doors etc to be prepared for hanging or sliding with and including either hookes and hinges or steel hanging fittings and hanging conforming to Fe 410 W (Gde - E-25) complete all as specified and as directed.
Taking down carefully aluminium conductor point wiring (light, fan, socket, power socket) complete fitting such as swithes, sockets, lamp holder, utility light fitting, fan regulator etc and removing materials from sites and making good distrubed surface of walls and roofs complete all as specified and as directed.
Taking down of unsv MCB DB SPN /TPN along with MCB's
Taking down of unsv Sub main wiring of any size
M & L for complete point wiring with 1.5 Sqmm single core multi stranded copper conductor FRLSH insulated and unsheathed heavy duty cable in colour code including contineous earth wire with cable of size 1.5 sqmm copper conductor flexible FRLSH insulated drawn in and including concealed PVC rigid conduit medium grade ISI marked after cutting chases in wall , plastering after concealing conduit , terminated into modular galvanised flush boxes of suitable size including white cover plate with frame as per relevant IS for mounting modular switches, sockets, fan regulators etc complete all as specified and as directed for the following :- (a) One Light / Fan point controlled by one, one way switch 6 Amp complete
(b) One 3 pin socket outlet 6 amp independent
(d) One bell/ buzzer point controlled by one, complete all as specified and directed.
(c) One 3 pin socket outlet 6 amp same board
All as per srl item No 151 above but for one 3 pin socket outlet 16 Amp independent with cable of size 2.5 Sqmm for point wiring and 2.5 sqmm as in continuous earth wire.
Supply and fix modular type switch, one way 6 Amps , 1 module complete all as specified and directed.
Supply and fix modular type socket 5 pin, 6 Amps 2 module complete all as specified and directed.
Supply and fix modular type switch, one way 16 Amps, 1 module complete all as specified and directed.
Supply and fix modular type socket 5 pin, 6 A/16 Amps 2 module complete all as specified and directed.
Supply and fix modular bell push with indicator polycarbonate materials ISI markrd 1 module, 6 Amps 240 Volts.
Supply and fix musical door bell, AC 230 Volts single phase.
Supply and fix modular type fan regulator step down 120 Watt, 2 module complete all as specified and directed.
Supply and fix ceiling rose surface, backelite, three terminal, 240 volts complete all as specified and directed.
Supply and fix LED light fitting 1 x 18Watt, 220V, AC decorative box type with driver, holder including LED Tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete with all fixing arrengenment all as directed by Engr in chage. Note:- The LED batten and LED tube rod shall be of same make.
Supply and fix of lamp holder,PVC /Polycarbonate type with back plate for batten fitting .
Supply and fix LED lamp suitable for B22 holder of capacity 10 Watt.
Supply and fix energy saving new generation 10W LED IP65 bulk head luminaire with opal diffuser complete all as specified and directed.
Supply and fix Distribution Board (SPN) double door 8 Way and should be IP 43 protected with Copper Bus bar 200 Amp rated ,Earth Bar ,neutral Bar Door Earthing.
Supply and fix Distribution Board (SPN) double door 4 Way and should be IP 43 protected with Copper Bus bar 200 Amp rated ,Earth Bar ,neutral Bar Door Earthing.
Supply and fix MCB SPN complete 32 Amp with rupturing capacity 10 KA 'C' series, complete all as specified and directed.
Supply and fix MCB Single pole 6 to 32 Amp with rupturing capacity 10 KA 'C' series, complete all as specified and directed
Supply and fix sub main wiring with single core cable 2x 6 sq mm FRLSH insulated Unsheathed stranded copper conductor cable 1100 Volts grade in rigid PVC conduit (Concealed) medium grade alongwith 1 x 6 Sq mm FRLSH insulated unsheathed copper conductor cable as earth wire connected with main earth dolly including chesing, cutting & making good to match with the existing surface complete all as specified and directed.
Supply and fix sub main wiring with single core cable 2x 4 sq mm FRLSH insulated Unsheathed stranded copper conductor cable 1100 Volts grade in rigid PVC conduit (Concealed) medium grade alongwith 1 x 4 Sq mm FRLSH insulated unsheathed copper conductor cable as earth wire connected with main earth dolly including chesing, cutting & making good to match with the existing surface complete all as specified and directed.
Supply and fix of exhaust fan, steel body AC single phase. 230 V of size 300 m sweep with, blades, and frame and louvers and including making of holes in wall, floor etc all as directed by Engr in charge.
Taking down and refixing of Ceiling fan any size/sweep, including oiling, Greasing and cleaning and applying two coats of synthetic enameled paint after preparation of surface complete over a coat of primer, all as specified and directed by Engr-in-charge.
Taking down the existing unserviceable Geyser and after disconnecting electrically & mechanically and examine & carry out the servicing/overhauling the geyser by thoroughly cleaning the tank, thermostat, heatingelement and LED Lamp indicator, testing in all respect for smooth running and refixing complete all as directed.
Supply and fix Vertical Distribution Board (VTP&N) 4 way double door suitable for and including MCCB four pole as incomer and out going MCBs and should be IP 43 protected with Copper BusBars, Neutral Links, Earthing bar all as specified and directed. Note:- (i) MCCBs FP & SP shall be measured paid separately (ii) MCB & DB shall have the same make.
Supply and fix 4 Pole MCCB 100 Amp, 415 Volts with rupturing capacity 16 KA , complete all as specified and directed
M & L for complete earthing with galvanised mild steel earth plate electrode of size 600x600x6mm thick burried directly in ground earth (in vertical) earth pit not less than 2.25 mtr deep below normal ground level with top edge of the earth plate not less than 1.5 mtr below ground level connected to galvanised iron or earth lead wire 4mm dia (8 SWG) by means of nut, bolt, check nuts and washer of galvanised ironl including PCC pit in PCC 1:2:4 type B-1 pre-cast RCC cover slab using reinfocement with XPM weighing not less than 1.87 kg/Sqm with suitable handle made of 12mm round bar, including necessary excavation and earth work in any type of soil, 20mm dia medium grade galvanised steel tube for watering with one end fixed with cast iron funnel and wire mesh 15mm dia bore light grade galvanised steel tubing upto 7.5 m length for drawing earth lead wire protection, common salt, charcoal, etc complete all as shown in electrical plate No 3 of SSR Part-I and testing on completion.
Supply, laying for replacement of unserviciable underground LT cable 1100 Volts grade heavy duty electric cable XLPE insulated & PVC outer sheathing with aluminium stranded conductor, Armoured cable 16 sq mm 4 core cable confirming to IS-7098 Part-I (1988) with latest ammendments.
Supply, laying and testing cable XLPE PVC insulated,screened, PVC bedded galvanised steel strip or wire armoured electric power cable ( heavy duty) 1100 volts grade with stranded aluminium conductor of size 25 Sqmm x 2 core .
Supply & laying dry river sand as cable cushioning 15cm thick layer before laying and 8cm thick over cable after laying the cable in trench complete all as specifieds and directed.
Supply & laying dry bricks over cable as mechanical protection layed flat with width equal to length of brick with sub class 'B' bricks complete all as specifieds and directed.
Material and labour for GI pipe ''light grade'' for road crossing / on wall / on pole with fixed clamps, nuts, bolts for cable protection of size 40 mm dia complete all as specifieds and directed.
Supply and fixing LED light fitting 1 x 10 Watt, 220 V AC decorative box type aluminuium housing with integreted electronic driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.
S&F LED luminaire 600 mm X 600 mm 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver & LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cases of suitable size complete.
S&F Ceiling fan complete with blades, down rods, electronics regulator (modular type 2M) and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.0 BEE. Five star rating with brushless direct current motor (BLDC) all as specifed.
M/S MANJIT SINGH AND SONS
M/S MOHAN LAL GUPTA
M/S Shesh Paul Gupta
NARESH KUMAR AND COMPANY
M/S VED PAUL MAHAJAN
M/S PARAMJEET SINGH
THAKUR BUILDERS AND CO
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .