Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.7 CrAdmitted-Finance | ₹1.7 Cr | L1 | Admitted-Finance |
| 2 | L2₹1.8 Cr+₹11.9 L (7.13%)Admitted-Finance | ₹1.8 Cr+₹11.9 L (7.13%) | L2 | Admitted-Finance |
| 3 | L3₹2.2 Cr+₹50.7 L (30.3%)Admitted-Finance OFFICE NO 208 B WING 2ND FLOOR GROMA HOUSE PLOT 14C SECTOR 19 VASHI NAVI MUMBAI VASHI NAVI MUMBAI MAHARASHTRA 400705 UDYAM MH 19 0041442 | THANE | MAHARASHTRA | 400705 | ₹2.2 Cr+₹50.7 L (30.3%) | L3 | Admitted-Finance |
| 4 | Not Admitted-Fee/PreQual/Technical | - | - | Not Admitted-Fee/PreQual/Technical EMD/Fee not received |
| Sl No | Description | Qty | Unit | BRITE INDUSTRIES L1 | M/s Associated Engineers L2 | Yogiraj Powertech Pvt Ltd. L3 |
|---|---|---|---|---|---|---|
| 1.00Supply, Installation, Testing and Commissioning of following AHU's complete with VFD enabled Motor, starter panel, cable , fittings etc as per the Clause No. 1 of Technical Specification. | ||||||
| 1.10 | 20 TR Capacity | 3 | Nos | 5,13,151 ₹15,39,453 Lowest | 5,60,000 ₹16,80,000 | 5,46,862 ₹16,40,586 |
| 1.20 | 15 TR Capacity | 2 | Nos | 4,16,045 ₹8,32,090 Lowest | 4,90,000 ₹9,80,000 | 4,61,767 ₹9,23,534 |
| 1.30 | 5 TR Capacity | 1 | Nos | 2,13,558 ₹2,13,558 Lowest | 2,50,000 ₹2,50,000 | 2,87,138 ₹2,87,138 |
| 2.00Supply, Installation, Testing and Commissioning of PIBCV of following Sizes Complete with Actuator, temperature Controller, Temperature Sensor, fittings, matching flanges/Nipple, Suitable power Supply as per Clause No. 2 of Technical Specification. | ||||||
| 2.10 | 65 NB | 3 | Nos | 1,25,150 ₹3,75,450 | 1,20,000 ₹3,60,000 Lowest | 1,60,134 ₹4,80,402 |
| 2.20 | 50 NB | 2 | Nos | 55,368 ₹1,10,736 Lowest | 1,10,000 ₹2,20,000 | 74,413 ₹1,48,826 |
| 2.30 | 40 NB | 1 | Nos | 50,293 ₹50,293 Lowest | 80,000 ₹80,000 | 67,173 ₹67,173 |
| 3.00Supply, Installation, Testing and Commissioning of following sizes of CI Gate valve PN 16 with GM internals complete with Flanges, Fittings, Gasket, GI nut & bolts with washers, etc. as per the Clause No. 3 of Technical Specification. | ||||||
| 3.10 | 150 NB | 10 | Nos | 26,990 ₹2,69,900 Lowest | 31,000 ₹3,10,000 | 61,947 ₹6,19,470 |
Tender Value
₹1.7 Cr
EMD Value
₹3.4 L
Closing Date
1 Aug 2024, 6:00 pmClosed
Chief Engineer and Director, ESG
Chief Engineer and Director, Engineering Service Group, BARC, Trombay, Mumbai-400085
Supply, Installation, Testing and Commissioning of AHUs, Air Compressor, GI Gratings, GI/MS Structure and Piping, Valves etc. at VDG, HIRUP, FIPLY, Engg. Hall 4 and 6, and CAP, TSD inside BARC, Trombay, Mumbai 40085
2024_BARC_815170_1
BARC/TSD/13/2024-25
Open Tender
Machineries/ Mechanical Engg Items
Item Rate
548 days
BARC, Trombay, Mumbai
Please refer Tender documents.
3 documents required · 3 mandatory
₹0
₹3.4 L
Conference Room, Gr FL, TSD
18 Sept 2024
8 Jul 2024
6 Aug 2024
8 Jul 2024
1 Aug 2024
8 Jul 2024
8 Jul 2024 - 18 Jul 2024
16 Jul 2024
Amount
Supply, Installation, Testing and Commissioning of following AHU's complete with VFD enabled Motor, starter panel, cable , fittings etc as per the Clause No. 1 of Technical Specification.
20 TR Capacity
15 TR Capacity
5 TR Capacity
Supply, Installation, Testing and Commissioning of PIBCV of following Sizes Complete with Actuator, temperature Controller, Temperature Sensor, fittings, matching flanges/Nipple, Suitable power Supply as per Clause No. 2 of Technical Specification.
Supply, Installation, Testing and Commissioning of following sizes of CI Gate valve PN 16 with GM internals complete with Flanges, Fittings, Gasket, GI nut & bolts with washers, etc. as per the Clause No. 3 of Technical Specification.
Supply, Installation, Testing and Commissioning of Following sizes of Class 2 flange type Gun Metal Gate valve complete with Flanges, Fittings, Gasket, GI nut & bolts with washers, etc. as per the Clause No. 4 of Technical Specification.
Supply, Installation, Testing and Commissioning of 25 NB Class 2 threaded type globe valve along with MS socket, GI nipple with insulation as per the Clause No. 5 of Technical Specification.
Supply, Installation, Testing and Commissioning of 80 NB Flange Type PN 16 CI NRV complete with flange, gasket, GI nut & bolts with washers, etc. as per the Clause No. 6 of Technical Specifications.
Supply, Installation, Testing and Commissioning of strainer/Filter complete with flange, gasket, GI nut & bolts with washers, thermocole insulation etc. as per the Clause No. 7 of Technical Specification.
Y-type Strainer 100 NB, Flange Type, CI Body and SS Screen
Y-type Strainer 50 NB, Flange Type, GM Body and SS Screen
Pot Strainer 80 NB GI/HDG Body and SS screen
Basket Filter 100 NB GI/HDG body with SS Screen
Supply, Installation, Testing and Commissioning of 100 NB Class-C MS pipe line Complete suitable bends, Flanges, Gasket and fitting and painting as per the Clause No. 8 of Technical Specification.
Supply, Installation, Testing and Commissioning of following sizes of Class C GI pipe line Complete with 19 mm closed rubber cell Insulation, Cladding and suitable GI bends as per the Clause No. 9 of Technical Specification.
Supply, Installation, Testing and Commissioning of GI Ducting of following thickness Complete with 19 mm closed rubber cell Insulation and Cladding as per the Clause No. 10 of Technical Specification.
Supply, Installation, Testing and Commissioning of following Air Distribution Grills as per the Clause No. 11 of Technical Specification.
Supply Grills with damper
Return Grills without damper
Supply, Installation, Testing and Commissioning of following diffusers with dampers as per the Clause No. 12 of Technical Specification.
Supply diffuser with dampers
Return diffuser without dampers
Supply, Installation, Testing and Commissioning of Electrically Actuated Damper complete with control panel and cable for AHU duct as per the Clause No. 13 of Technical Specification.
Supply, Installation, Testing and Commissioning of isolation damper for duct as per the Clause No. 14 of Technical Specification.
Supply, Installation, Testing & Commissioning of GI Structure and Gratings etc. as per the Clause No. 15 of Technical Specification.
Supply, Installation, Testing & Commissioning of MS Structure as per the Clause No. 16 of Technical Specification.
Welding joints of different sizes of MS/GI pipe as per the Clause No. 17 of Technical Specification.
Supply, Installation, Testing and Commissioning of following Air-Compressor complete with air dryer unit, as per the Clause No. 18 of Technical Specification.
Maximum Operating Pressure - 7 bar, Tank Capacity minimum - 270 liters.
Maximum Operating Pressure - 10 bar, Tank capacity Minimum - 500 Liters
Supply, Installation, Testing and Commissioning of Horizontal Split casing Centrifugal pump motor set complete with insulation for Chilled water with following details as per Clause No. 19 of Technical Specification. a) Flow: 50 CMH b) Head: 30 mtr WC c) Motor: Suitable IE2,VFD enabled motor with IP-55 protection suitable for 3 phase 50 Hz, 415 volts power supply.
Supply, Installation, Testing and Commissioning of MCC panel made out of 2 mm thick CRCA sheet and consisting of 2 VFD drive along with bypass starter for motor speed control complete with all other accessories for chilled water pumps as per the Clause No. 20 of Technical Specification.
Supply, Installation, Testing and Commissioning of End Turmination suitable for 4 Core X 6 Sqmm. XLPE cable as per the Clause No. 21 of Technical Specification.
Supply, Installation, Testing and Commissioning copper earthing strip size of 25 mm x 3 mm as per the Clause No. 22 of Technical Specification.
Supply, Installation, Testing and Commissioning of Differential pressure transmitter suitable for VFD of chilled water pump complete with local display, signal/control cable, mounting accessories, suitable cold drawn copper tube, brass connector, etc. as per the Clause No. 23 of Technical Specification.
Supply, Installation, Testing & Commissioning of PIBCV with Modulating type actuator size of 20 NB complete with both side suitable ferrule fitted brass male/female connector, insulation, etc. as per the Clause No. 24 of Technical Specification.
Supply, Installation, Testing & Commissioning of temperature controller suitable for PIBCV actuator size of 20 NB to regulate the valve of FCU as per preset temperature in the room as per the Clause No 25 of Technical Specification.
Supply, Installation, Testing and Commissioning of suitable cable for jointing with actuator valve, temperature controller and FCU as per the Clause No. 26 of Technical Specification.
Supply, Installation, Testing and Commissioning of AC power point connection complete with 3 core 1.5 Sqmm XLPE/PVC cable, conduit /casing, capping with maximum length 10 meters and 2 pole DPDT with CRCA coated metal enclosure as per the Clause No. 27 of Technical Specification.
Supply, Installation, Testing and Commissioning of Bourdon Tube SS Pressure gauges complete with SS Ball Valves and SS Siphon tube. Pressure gauge range from 0-10 Kg/cm2 as per the Clause No. 28 of Technical Specification.
Supply, Installation, Testing and Commissioning of 4" dia. dial type temperature gauge, range 0 to 50 ºC complete with SS thermowell as per the Clause No. 29 of Technical Specification.
Supply, Installation, Testing & Commissioning of electromagnetic flow meter suitable for 4 inch dia. GI pipe line along with transmitter, signal cable, local display unit as per the Clause No. 30 of Technical Specification.
Supply, Installation, Testing and Commissioning of marine plywood thickness of 19 mm as per the Clause No. 31 of Technical Specification.
Rectification of Condenser and Evaporator coil and Re-commissioning of package type refrigeration system (capacity 5 TR)of dehumidifier complete with Pressure test, Vacuum test and Refrigerant supply and charging as per the Clause No. 32 of Technical Specification.
Supply, Installation, Testing and Commissioning of cold drawn copper tube size of 5/8 inch complete with insulation as per the Clause No. 33 of Technical Specification.
Supply, Installation, Testing and Commissioning of Painting work of MS structure, pipe support, etc, as per the Clause No. 34 of Technical Specification.
Supply, Installation, Testing and Commissioning of RCC as per the Clause No. 35 of Technical Specification.
Supply, Installation, Testing and Commissioning of PCC as per the Clause No. 36 of Technical Specification.
Excavation of soft soil as per the Clause No. 37 of Technical specification.
Excavation of PCC, RCC & hard soil as per clause No. 38 of technical specification.
Supply, Installation, Testing and Commissioning of High Density Thermocole Insulation complete with Vapour barrier, Plastering and painting as per Clause No.39 of Technical Specification.
Supply, Installation, Testing and Commissioning of Closed Rubber cell insulation with cladding as per Clause No.40 of Technical Specification.
Safe Removal of Existing plenum/ducting of AHU complete with Insulation & Supporting MS structure and shifting to dumping Yard as per the Clause No. 41 of Technical Specification.
Safe Removal of Existing following capacity of AHUs complete with electrical panel, cable, damper etc and shifting to dumping Yard as per the Clause No. 42 of Technical Specification.
Safe Removal of existing chilled water piping size up to 4 inch dia. complete with valves, Strainers, Insulation, Supporting MS structure etc. and shifting to dumping Yard as per the Clause No. 43 of Technical Specification.
Safe Removal of existing MS structure Supports and shifting to dumping Yard as per the Clause No. 44 of Technical Specification.
Safe Removal of existing chilled water pump of head 30 M and flow 60 CMH complete with electrical panel cables accessories and shifting to dumping Yard as per the Clause No. 45 of Technical Specification.
M/s Associated Engineers
Yogiraj Powertech Pvt Ltd.
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.29 MB
Tendernotice_2.pdf
PDF • 0.72 MB
Tender_document.pdf
Tender Documents • 1.66 MB
BOQ_856666.xls
BOQ • 0.36 MB
TECHNICAL_BID_BARC_TSD_13_2024_25.xls
Tender Documents • 0.31 MB
Proforma_of_schedules_A_to_F.pdf
Tender Documents • 0.16 MB
SCHEDULE_A.pdf
Tender Documents • 0.14 MB
Technical_Specification.pdf
Tender Documents • 1.24 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .