Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹41.7 LAccepted-AOC FLAT NO 703 7TH FLOOR PARVATI ENCLAVE PLOT NO 180 SECTOR 2 TOLOJA PANCHANANDTAL TALOJA MAJKUR DISTT RAIGAD MAHARASHTRA 410208 | RAIGAD | MAHARASHTRA | 410208 | L1 | Accepted-AOC Lowest | |
| 2 | L2₹45.6 L+₹2.8 L (6.43%)Rejected-Finance | L2 | Rejected-Finance Other than lowest | |
| 3 | L3₹46.3 L+₹3.4 L (7.93%)Rejected-Finance | L3 | Rejected-Finance Other than lowest | |
| 4 | L4₹46.5 L+₹3.6 L (8.47%)Rejected-Finance D BLOCK D 57 BARRA 8 BARRA 8 BARRA 8 KANPUR NAGAR UTTAR PRADESH 208027 | KANPUR NAGAR | UTTAR PRADESH | 208027 | L4 | Rejected-Finance Other than lowest | |
| 5 | L5₹43.0 L+₹15,322.95 (0.36%)Rejected-Finance | L5 | Rejected-Finance Other than lowest |
Tender Value
₹50 L
EMD Value
₹1 L
Closing Date
6 Jun 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) Gorakhpur
GE (AF) Gorakhpur
COMPREHENSIVE MAINT OF AKASH VIHAR AND PETTY REPAIR FOR DAY TO DAY MAINT OF AKASH VIHAR AT AF STN GORAKHPUR
2024_MES_653975_1
9165/E8
Open Tender
Civil Works
Item Rate
270 days
GE (AF) Gorakhpur
Class D Cat a i
8 documents required · 8 mandatory
₹500
GE (AF) Gorakhpur
₹1 L
Yes
23 Jul 2024
15 May 2024
8 Jun 2024
15 May 2024
6 Jun 2024
29 May 2024
15 May 2024 - 22 May 2024
Amount
Demolition of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles complete all as specified and directed.
M&L for brick work with subclass 'B' brick straight or curved on plan 6m mean radious built in CM (1:4) etc complete all as specified and directed at site.
Taking down cement or cement lime plaster any description incl racking out joints, hacking for keys, scrubbing down with water etc complete all as specified and directed.
M&L for rendering 15mm thick in cement mortar 1:4 on fair faces of brick masonry or concrete surfaces of walls, chajja, fins facia etc upto 3 storie height mixed with water proofing compound (ISI marked) @ 3% by weight of cement or as per manufacturer’s instructions, finished the surface fair and even (without using extra cement), complete all as specified. Note 1: - Supply only water proofing compound shall be measured and paid for separately.
Supply only integral water proofing compound (ISI marked).complete all as specified and directed at site.
M & L for rendering 15 mm thick in cemnet mortor 1:6 on fiar faces of brick work or concrete surfaces & finish the surface fair and even (without using extra cement), complete all as specified and directed at site.
M&L for rendering 5 mm thick in cement mortar 1:3 on concrete surfaces in ceiling,finished even & smooth without using extra cement complete all as specified.
M& L prepaation of new plastered surface of wall and applying two coat of cement base paint over a coat ofalkali resistant primer primer and 2 mm tick wall care putty complete all as specified and directed
M & L for Preparing new plastered or unplastered surfaces of wall and applying two coats of distemper oil emulsion, white or tinted over & over a coat of alkali priming coat and 2 mm thick wall care putty, complete all specified and directed
M & L for preparation of new plastered surfaces of ceiling and applying two coat of white wash complete all as specified and directed.
Taking down chawkhats or frame with shutter (without taking out shutter from the frame n.exc 1.50 Sqm each and removing from site complete all as specified and directed.
All as per Item No. above but exc 1.50 Sqm and n.exc 4 sqm each complete all as specified and directed at site..
Taking down shutter of any description exc 1 Sqm but n exc 2 Sqm each complete all as specified and directed at site.
Taking down shutter of any description n. exc 1 Sqm but each complete all as specified and directed at site.
Resecuring or easing & adjusting without taking of shutters of any description area exc 1 but n. exc 2 sqm each, complete all as specified and directed.
S&F 2nd class hard wood (sal) plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue, pinned at joints complete as directed.
M & L IInd Class hard wood 35mm thickness Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats
M&L for IInd class hard wood glazed and skeleton shutters 30mm thick, factory made open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats, complete all as specified and as directed.
S&F 30mm thick flush shutter, factory made, solid core construction with particle board care and plywood face panels commercial type on both side complete all as specified and as directed.
S&F Factory made solid PVC Chowkhat /Door frame of size 50x47 mm with a wall thickness of 5 mm, made out of extruded 5 mm thick rigid PVC foam sheet coloured, reinforced with 19x19mm MS square tube of 19 gauge including rubber gasket, PVC fasteners, screws, brackets as per SSR Part –II (2010) complete all as specified and directed.
S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails. M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rails on either side & as gap insert for top rail & bottom rail. Paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing as mentioned in SSR-2010.
S & F pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, locks, strike plate etc complete and the size of frame is 125 x 60 mm.
S & F pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, locks, strike plate etc complete and the size of frame is 105 x 60 mm.complete all as specified and directed at site.
S & F steel windows with side hung shutters (single frame with double shutter)inside gauzed and outside glazed including projection type hinges with steel handles and steel peg stay complete with glazing bars dovetailed or welded. complete all as specified and directed at site.
S & F steel ventilator with top hung shutters including hinges steel peg stay, guard bars 10mm sqare, MS bars welded @ 175 C/C horizontally etc complete all as directed.
S&F 100mm size mild steel butt hinges, medium weight cold rolled complete all as directed.
S&F 75 mm size mild steel butt hinges, medium weight cold rolled complete all as directed.
S&F in repairs 75 mm size mild steel butt hinges, medium weight cold rolled complete all as directed.
S&F in repairs 100mm size mild steel butt hinges, medium weight cold rolled complete all as directed.
S&F extruded aluminium anodized pressed handle, fabricated type of size 150mm, complete all as specified.
S&F in repairs extruded aluminium anodized pressed handle, fabricated type of size 150mm, complete all as specified.
S&F 150 mm long Aluminium anodized barrel tower bolt, complete all as specified.
S&F in repairs 150 mm long Aluminium anodized barrel tower bolt, complete all as specified.
S&F in repairs 200 mm long Aluminium anodized barrel tower bolt, complete all as specified.
S&F 250mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and directed.
S&F in repair 250mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and directed.
M&L for preparation of new or previously untreated surfaces of wood or wood based materials of any description, not other wise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
M&L for preparation of new or previously untreated surfaces of steel of any description, over 10cm in width or girth and apply two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples.
S&F in repair Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples.
S&F in repair 1st class Hard Wood Beads, straight (any size) for glazed or gauzed joinery, renewed, including mitres etc. complete all as specified and directed.
Hacking out old broken glass (any thickness, size, quality or escription) from wooden/metal frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads.
S&F 3mm thick sheet glass ordinary quality and galzing with oil putty in square n. exc 0.5 sqm in each pane.
M&L for 3mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all specified and as directed.
Cutting out old steel hinges (projecting type) from existing windows, S&F new hinges and welded, including cutting out and making good the jamb portion where required and making complete serviceable including applying two coats of synthetic enamelled paint complete all as specified and directed.
S&F in repair mortice lock of mild steel vertical type of size 150mm with 6 levers fixed to wooden/ aluminum doors complete all as specified and directed.
S & F in repair Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed
S&F in repair two (double) legged floor door stopper of aluminium body and tongues anodess with hard drawer steel spring fixed in floor of 150mm complete all as specified and directed.
S&F in repair door closer hydraulically regulated, aluminium (extruded section body )designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60kg and fixed in repair.
S&F in repairs 300mm MS ordinary rat tail rod pattern spring including roller & roller plate complete all as specified and as directed.
M&L powder coated aluminium doors (sliding/hanging type) with frame size 101.60X44.45X 2.00 mm thick and shutter aluminium anodised and top rail 47.62X 44.45 X 1.50mm and style 47.5 x 44.5 x1.5 mm , lock rail 83.50X 44.45 X 1.50 mm and bottom rail150.00X 44.50 X 2.50 mm and stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture1.4mm incl necessary aluminium fittings like aluminium butt hinges 04 Nos , aluminium handles 150mm 02 Nos, aluminium tower bolts 200mm 01No, mortice lock 4 lever MS, hydraulic door closer of suitable capacity 01 No, aluminium door stopper 01 Nos, jointing cleats, glazing cleats, rubber packing , anodised aluminium shape beading, screws etc with paneling in two parts with 12mm thick prelaminated particle board in lower panel and 5mm thick tinted glass in upper panels incl all fittings& fixture complete all as specified and directed.
M&L powder coated aluminium (sliding/ hanging type) windows/ventilator with frame size 60x40x2.00mm thick and shutter with section bearing bottom 25x18x1.50, top 39.4x17.7 X1.50 mm ( suitable for moving over three track fixed over top of frame work , top and side section of size 61.6 x 31.75x1.5mm and bearing bottom track of size 61.6x 31.75x1.5mm or fixing with hinges steel wire cloth 0.36mm nominal dia of wire and average width of aperture1.4 mm including necessary aluminium jointing cleats, glazing cleats, rubber packing anodised shape beading, screws etc with 4 mm thick tinted/ plain glass in panels incl anodised aluminium grill with all fittings & fixture complete all as specified and directed .
S&F in repairs steel window handles with nuts & bolts or with screws complete all as specified and as directed by Engineer in Charge.
S&F in repair steel window peg stay all as directed complete all as specified and as directed by Engineer in Charge.
S & F in repairs 100mm Hasp and staple, safety type, of anodised aluminium including bolt to hinge plate and fixed with screws complete.
S&F in repairs 6 mm thick plywood grade BWR, type BB fixed to timber framework of any thickness complete all specified and as directed.
S&F in repair curtain rod/rail with drapery rod plastic coating fancy type 25 mm dia including bracket and with two glob with necessary fitting etc measured end to end of globe as requirement at site complete al as specified and directed.
Repair/easing/readjusting of aluminium door/ window shutters by taking down shutters from frame and dismantling members of shutters like, glass, rails and style by necessary cutting, grinding of members etc and refixing same including rubber gasket, hinges, handle screws etc complete all as specified and directed.
M&L anodised aluminium grill Wt nexc 3.50 kg per sqm with all fittings& fixture, shape and size as approved complete all as spesified and directed .
S&F in repair prelaminated particle board, 18/19 mm exterior grade, prelaminated two side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed.
S&F 15 mm bore GI tubes, medium grade galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors or concealed including taking up or down steel tubing and connections including cleaning for re-fixing or removal to store complete all as specified and directed.
S&F 20 mm bore GI tubes, medium grade galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors or concealed including taking up or down steel tubing and connections including cleaning for re-fixing or removal to store complete all as specified and directed.
Refixing old steel tubing and connection in new or old position (wall, floor, ceiling etc) of 15mm bore of pipe including cleaning for refixing or removal from the site complete all as specified and directed.
All as per item No. 63 above but 20mm bore complete all as specified and directed at site.
S&F in repairs bib taps 15 mm bore brass, chromium plated, fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.
S&F in repairs 15 mm dia brass angle cock fancy type, with capstan head chromium plated screwed down high pressure with or without lettered with long screwed shank and fly nut screwed complete all as specified and directed.
S&F in repair Concealed stop cock (fancy type),15 mm bore, chromium plated ,with long shank and cup, complete all as directed .
S&F in repairs brass chromium plated two way angle cock, of 15 mm bore complete all as specified and directed.
S&F in repairs 15mm and dia 125mm of chromium plated shower roses with or without swivel joints, any size incl fixing to steel pipe or union complete all as specified and as directed.
S&F 15mm bore pillar tap fancy type cast copper alloy chromium plated screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screw shanks screwed for iron pipe or union complete all as specified and as directed.
S&F in repairs 15mm bore pillar tap fancy type cast copper alloy chromium plated screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screw shanks screwed for iron pipe or union complete all as specified and as directed.
S&F in repairs stop valves 15mm bore cast copper alloy, screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union. complete all as specified and as directed.
S&F in repairs 15mm bore CP central hole basin mixture for WHB fixed to GI pipe with braided hoses complete all as specified and as directed.
S&F in repairs gun-metal 20 mm bore, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.
S&F in repair 32/40 mm spring type PVC waste pipe fixed to WHB & Sink etc complete all as specified and directed ( Note minimum length of each pipe should more than 0.70RM)
S&F in repairs PVC connection 15mm size with PTMT nuts of length 450 complete all as specified and directed
S&F in repair Vitreous China wash down water closet pan (pedestal pattern, with EWC including p or s trap ,seat cover , including connection to trap /drain and to flushing pipe anti syphonage pipe etc complete including making good floorcomplete all as specified as directed.
S&F in repair vitreous china squating pan orissa pattern size 580X 440mm white with intregal foot rest complete including lime concrete(excl flushing cistern and flush pipe) but connecting to flushing pipe, anti-symphonage pipe etc complete fixed in repair complete all as specified as directed.
S&F in repairs Vitreous china WHB, white, flat back, of size 550 x 400 mm including brackets, waste coupling 32mm, and waste Pipe, 32mm complete all as specified and directed.
S&F in repair CP bottle trap for WHB having minimum water seal 32 mm complete all as specified and as directed.
S&F in repair PVC valveless, syphonic action type flushing cistern complete with syphon handle lever float valve and PVC bend incl connecting to ITWC/ETWC and fixing on walls with brackets complete all as specified and as directed by Engineer in Charge.
S&F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.
S&F in repair sink with drainage board of stainless steel 1mm thick kitchen or laboratory with plugs, washer and wastes, including in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe over all size 915 mmx460 mm bowl size 410mmx330mmx 160mm with all fitting and fixture complete with necessary fitting all as specified and directed.
S&F in repairs brass chromium plated tubular towel rail 20mm dia 600 mm long, fixed complete all as specified and as directed.
S&F 500 ltr capacity triple layer, rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position with 20mm bore high desity plastic ball brass valves, high pressure of PTMT with epoxy coated aluminium rod screwed for iron pipe and fixed including dismantling water tanks of capacity exceeding 250 litres but not exceeding 500 litres all as specified and directed.
S&F 1000 ltr capacity triple layer, rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position with 20mm bore high desity plastic ball brass valves, high pressure of PTMT with epoxy coated aluminium rod screwed for iron pipe and fixed including dismantling water tanks of capacity exceeding 500 litres but not exceeding 1000 litres all as specified and directed.
M&L for cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc of exc. 250 liters & n.exc. 500 liters capacity of tanks with bleaching powder @ 0.25 Kg per tank complete all as specified and directed.
All as per item No.88 above but exc. 500 liters & n.exc. 1000 liters capacity with bleaching powder @ 0.25 Kg per tank.
S&F in repair ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe or brass ferrule and fixed of 15mm bore (Minimum weight 142 gms.) complete all as specified and directed.
All as per item No. 90 above but of 20mm bore (Minimum weight 210 gms.) complete all as specified and directed at site.
Taking down of rain water pipes, of any dia and pattern complete all as specified and directed.
S&F 110mm dia PVC (SWR) soil, waste and vent pipes single socketed in any length with rubber ring joints, fixed to walls complete all as specified and directed.
All as per item No. 93 above but of 75mm dia complete all as specified and directed at site.
S&F 110 mm dia PVC (SWR) bends any radius complete all as specified and directed.
All as per item No. 95 above but of 75mm dia complete all as specified and directed at site..
S&F stack clamps made out from 50 x5mm size flat iron and 16 mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 110 mm bore of pipe etc complete all as specified and directed.
S&F 110 mm bore PVC (SWR) branch piece double, (double Y) equal or unequal with access door complete all as specified and directed.
S&F 75mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.
S&F 75mm bore PVC (SWR) malty floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.
S&F 110 mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.
S&F in repairs PTMT grating 125mm dia complete all as specified and directed.
S&F in repair PVC tank cover for 500 ltrs water tank complete all as specified and directed.
ditto, as per Item No 102 above but 1000 Ltr capacity each complete all as specified and directed at site..
S&F repair plastic water closet seat cover for pedestal or semi pedestal pattern, white/black closed pattern with flat botom and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed by Engineer in Charge.
S&F in repair PVC coloured bath cabinet overall size 500x410mm decorative design with looking mirror all as specified. Make:- Marrigold/Commander/Prayag
M&L for spot welding in repairs not exc 2.5cm in length exc 6mm but n.exc 9mm thick complete all as specified and as directed.
S&F in repair stainless steel plate rack of minium size 970X770X230mm of standard quality, fixed to wall with wooden gutties and screws, complet all as specified and directed.
M & L for Non-skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors/skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM (1:6) including dismantling of tiles, complete all as specified and directed.
M & L for Non-skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors/skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM (1:6) including dismantling floor, hearth or wall tiling including dismantling of tiles, complete all as specified and directed.
M & L for Non-skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors/skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM (1:6) including dismantling floor, hearth or wall tiling including dismantling of tiles, complete all as specified and directed.
M&L for Glazed ceramic coloured tiles 350x 250x 7mm/ 450X 350X 7mm thick, laid on vertical surfaces such as skirting, dados and risers to steps etc laid over 10mm thick cement plaster in CM (1:4) set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles includingdismantling of tiles, complete all as specified and directed.
M&L for double charged Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 including dismantling of tiles, complete all as specified and directed.
S&F in repair waste fitting brass chromium plated 32mm dia for wash hand basin complete all as specified and as directed by Engineer in Charge.
S&F in repair waste fitting brass chromium plated 40mm dia for wash hand basin complete all as specified and as directed by Engineer in Charge.
Dismantling of false ceiling board ,fiber insulation board any thickness including wooden cover fillets aluminium frame work as directed .
S&F anodised aluminium snap grid ( size 605mm x 605mm) frame work for false ceiling with hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long and fixing 4mm thick non asbestos fibre cement building boards fixed or laid/inserted to aluminium framed work complete all as specified and directed.
S&F mild steel flat iron as in hold fast including screwing or welding all as specified.
M&L provding cement concrete 1:3:6 using 20mm graded stone agg as in hold fast complete all as specified & directed.
S&F in repair mild steel helical door spring 300mm ordinary rat tail type incl roller and roller plate complete fixed with screws to wooden frame or with welding to steel frames complete all as specified and as directed by Engineer in Charge.
Demolition of cement concrete un- reinforced of any description and in any position not otherwise specifically provided for complete all as specified and directed.
M&L 75mm thick cement concrete 1:4:8 type D2 using 40mm graded stone aggregate as in sub base complete all as specified.
M&L for screed bed or beding layer of mortar 20mm thick in cement mortar 1:4 for laying floor finishes complete all as specified and directed at site..
M&L Chequered cement concrete tiles with grey cement & pigment 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors all as specified and directed.
M&L 100mm thick cement concrete 1:4:8 type D2 using 40mm graded stone aggregate as in sub base complete all as specified.
M&L for sand cushioning layer under the floors and hand level surface including watering and consolidation to receive floor tiles complete all as specified and directed at site..
M&L for Machine pressed precast concrete interlocking paver block vibro compacted rubber moulded with grey cement and pigment any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-40 Grade complete all as specified and directed by Engr-in-Charge.
M&L 100mm thick PCC 1:2:4 type B-1, using 20mm graded stone aggregate as in hard standing finished even and smooth without using extra cement including spike rolling to surface or making impression of expanded metal whilst the concrete is green complete all as specified and directed at site..
M&L for 75mm thick cement concrete type C2 1:3:6 using 40 mm graded stone aggregate as in plinth protection including finishing cement concrete surfaces even and smooth without using extra cement complete all as specified and directed at site
M&L for Forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound, Grade 'A' complete all as specified and directed at site..
Supply and Application of 5 Layer SHR Waterproofing Coating System as per manufacturer application procedure on leaking concrete roof surface by thorough surface preparation with high pressure water jet min. 125 bars, opening the cracks, followed by one absorption coat of nano-tech enhanced elastomeric waterproofing (NEEWP) emulsion having UV resistance and min. 50% solids, filling and sealing the cracks, then over coating with 2 Coats of NEEWP + Cement mixture as waterproofing coat having +450% Elongation. The surface is then to be tested for water tightness with a ponding test for min. 2 days and then top-coated with 2 Coats of SHR Coating - pure acrylic based, UV resistant, non-yellowing, bio-organism resistant (anti-fungal, anti-bacterial) conforming to BIS STD IS 17218:2019 with Pull off Adhesion 2.8 Mpa, passes 2000 hrs accelerated durability test, suitable for all types of cementitious surfaces, white colour, matt, surface coverage 3.25 SQM/Ltr/2 Coats, DFT 100 - 120 microns using brush, roller, airless spray gun as applicable. The product should be certified by NABL Approved Lab and application is to be done by company approved applicator only.The guarantee for treatment shall be given by the contracyor in writing for a period of 5 year and security deposit @ 2.5 % of total cost of treatment shall be given for 5 year from the date of completion of work.
Dismantling of Plain or corrugated steel/fibre sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings
Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified
Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.
M&L for Joist, channel, angle, or tee sections, Fe 410 -W (Gde E- 250) quality A fixed independently, with or without connecting plates, etc complete all as specified and directed.
M&L for hot rolled steel flat Framed work of water tanks mesh welded and similar work conforming Fe 410 -W (Gde E- 250) quality A omplete all as specified and directed.
S&F 4mm dia galvanised steel wire, 150x100mm mesh, made up into mattresses or cages, lapped, wired and laid in position, including closing after filling complete all as spcified and directed.
S&F mild steel framed work such as grills, gratings, fillets etc with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars etc conforming to Fe 290, grade E-165 complete all as directed.
Petty repair to leaking bib cock, pillar cock, stop cock, angle valve , gate valve any size, brass spindle, waste pipe, shower rose, float valve,concealed stop cock, PVC connection of any description by changing of jumper washer, spindle for bib cock, pllar cock,concealed stop cock etc or putting M seal cleaning of air lock in the pipe for ensuring proper water supply Repair to leaking flushing cistern low/high level, incl adjustment in the internal fiiting replacement of syphon, washer/jumper, flush handle, lever etc as required , Petty repair for rectification of air lock in GI pipe and making the water supply available upto water taps incl attending the complaints of no water supply.repair to PVC bend, pipe etc . ( Rates are deems to be including replacement washers (hot/cold) ,, flush pipe,GI Nipple,union,Socket,Reducer Socket,bend,Elbow,Reducer Elbow ,Tee,brass spindle, flush syphon, flush handle, pata screws etc) complete all as specified. Notes:-1. The contractor shall make all arrangement for attending the different types of complaints on day to day basis. 1.. Rate shall be quoted accordingly, keeping in mind above said provisions. 2. The complaint shall be attended by the contractor within 12 hours from the lodge of complaint, failing which a panel recovery 200/ complaint shall be recovered from the contractors dues.
Attending complaint for repair to easing of any type of Doors/Window/Cup Board shutters and chowkhats, aluminum doors by tightening of hinges / handles / aldrop bolt / tower bolt / knobs, hasp and staple etc of any size / any number of panels for easy closing / opening or changing the position of hinges, adjustments of tower bolts, sliding bolts, replacement of looking mirror, curtain rod etc complete including taking down joinery and refixing in the same place and replacement of minimum defective item if required like screws, nails, bits etc, complete all as specified and directed by Engineer in Charge. Notes:- 1. The contractor shall make all arrangement for attending the different types of complaints on every day basis. Any major item required to be replaced with new one, to make the joinery work functional shall be measured and paid for separately as Supply and 'S&F' under respective item of this schedule. Old retrieved item (s) as considered in 'Schedule of Credit' shall become property of the contractor. 1. Rate shall be quoted accordingly against these items, keeping in mind above said provisions. 2. The comlaint shall be attended by the contractor within 12 hours, failing which a panel recovery of Rs 200/ complaint shall be recovered from the contractor dues and no dispute will be intertained at later date
M&L Petty repair to existing steel window /Rolling Shutters, Pressed steel frame, Rat tails spring, Steel Almirah, Mortise lock fitted in steel Almirah and fixing wire mesh on steel windows by welding in situation and in any floor and including hinges 100 mm medium weight to chowkhats after taking down door/window shutter and refixing in position and making functional,repair /screwing of CGI/Prepainted sheets (Welding rod welding machine, small fittings such as window handle, hinges ,Screws etc will be provided by the contractor) removing the steel window shutters from the frame and re-fixing after making serviceable complete in AKASH VIHAR area complete all as specified and directed by Engineer in Charge. Notes 1. The contractor shall make all arrangement for attending the different types of complaints on day to day basis. Any major item required to be replaced with new one, to make the system functional shall be measured and paid for separately as "S&F" under respective item of this schedule. 2. Contractor shall provide minimum one welder in a week including all necessary T&P. Additional workers can be engaged if nature of work required to be completed within fix time frame as desired by the GE. Rate shall be quoted accordingly, keeping in mind above said provisions. 3. Wherever material is fixed as "S&F" under respective item of this Sch, the payment for complaint under this item shall not be paid. 4..The comlaint shall be attended by the contractor within 12 hours, failing which a panel recovery of Rs 200/ complaint shall be recovered from the contractor dues and no dispute will be intertained at later date
M&L for replacement of MS brackets for WHB/sink/flushing cistern fixed in repairs incl taking down old brackets and making good damaged surfaces to match with the existing etc complete all as specified and as directed by Engineer in Charge.
S&F in repair PVC connections 15mm size with PTMT nuts of length 600mm. complete all as specified and as directed by Engineer in Charge.
S&F in repair flush pipe (PVC) for low level flushing cistern including joining to WC complete all as specified and as directed by Engineer in Charge.
S&F in repairs PVC syphon with handle complete for low level flushing cistern complete all as specified and directed by Engr-in-charge.
S&F in repairs PVC polyplast float valve for cistern tank complete all as specified and directed by Engr-in-charge.
M&L in repair for PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified.
S&F in repair vitreous china Urinal, half stall type, white (excluding flushing cistern, flush pipe and waste pipe) with urinal spreder complete all as specified and as directed by Engineer in Charge.
S&F in repairs 15 mm Bib taps,(long body) cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed all as specified and directed.
S&F in repairs Brass CP central hole mixer for mixing hot & cold water screwed down with PVC & CP connection on WHB complete all as specified and directed by Engineer-in-Charge.
S&F in repair SS jet spray for water closet with suitable SS flexible pipe of 15 mm bore complete all as specified and directed by Engineer-in-Charge.
S&F in repair Soap dish, vitreous China white, aprroximate size 160x 160x90mm complete all as specified and as directed.
S&F in repairs sheet glass shelf assembly consisting of 5.50mm thick glass shelf 12 cm wide with chromum plated bracket guard and railing 60cm longcomplete all as specified and directed at site..
S&F in repair coloured toilet paper holder of vitreous china fixed to walls with chromium plated (CP) brass screws complete all as specified and directed by Engineer-in-Charge.
Cutting chases in brick walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, shelves, lintels, etc, and cutting chases for concealed water tubing’s or conduit wiring, etc and making good, cutting not exceeding 10cm girth ccomplete all as specified and directed at site..
S&F in repairs 15 mm bore Bib tap standard of PTMT fancy type any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm-90gms).complete all as specified and directed at site.
S&F in repair mild steel sliding door bolts plate type stove enamelled black with bright bolt not less than 12mm dia with and incl a minimum of 06 bolts and nuts. Four on bolt plate and two on staple plate, length of bolt 250mm complete all as speified and as directed by Engineer in Charge.
S&F in repair mild steel barrle tower bolt stove enamelled with bright bolt length of bolt 200mm all as specified and as directed.
S&F in repair 5.5mm thick, sheet/ tinted glass, ordinary quality to be fixed with aluminium beading and rubber gas kit in aluminium frame work as in door/ window/ partition etc all as specified and directed.
M&L in repair for 4mm thick both side aluminium decorative sheet laminated partition panel for fixing in aluminium door shutters by taking out old ply/board from exsting aluminium door shutters complete all as specified and directed
S& F in repair aluminum glazing clips / beading for aluminum door and window complete all as specified and directed at site..complete all as specified and directed at site..
S& F in repair rubber gasket for packing / beading for aluminum door and window complete all as specified and directed at site..
S&F in repairs rubber dool seal (Rubber Strips) of size 900mmx 50mmx 2 to 3 mm thick fixed to wooden doors complete all as specified and directed by Engineer-in-Charge.
M&L for providing 40mm thick cement concrete type B-1, 1:2:4 using 20 mm graded aggregate as in 20 mm thick flooring ,finishing the concrete surfaces even and smooth using extra cement .complete all as specified and directed at site.
M & L for Rendering 10mm thick in cement mortar 1: 4 on faces of brick work or concrete surfaces, upto double storey finished even and smooth w/o using extra cement including taking down cement or cement lime plaster, any description, on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed at site..
M & L for Preparing new plastered or unplastered surfaces of wall and applying three coats of white wash complete all as specified and directed.
M&L in repairs 25 mm thick Prelaminated particle board,exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed as in cupboard with handle arrangement to up down on required size including dismantling boarding, any description, fixed in any position with nail or screw complete .
M&L in repairs 100mm dia CI pipe including necessary repair to cement in wall/floor etc and making proper functioning of pipe lines jointing with cement mortar including taking down CI pipe with necessary brackets from wall/floor etc complete all as specified and directed.
M&L in repairs 75mm dia CI pipe including necessary repair to cement in wall/floor etc and making proper functioning of pipe lines jointing with cement mortar including taking down CI pipe with necessary brackets from wall/floor etc complete all as specified and directed.
S&F Cast iron bends/ branch pieces etc of any radius, diminishing pieces or tapers 100mm bore size complete.
S&F Cast iron bends/ branch pieces etc of any radius, diminishing pieces or tapers 75mm bore size complete.
M/S NITISH ASSOCIATES
NEHA INFRASTRUCTURE & COMPANY
M/s Pandey Trading Company
ANIRUDH ENTERPRISES
M/S BHARAT CONSTRUCTION
GANGA TRADERS
Matrubhoomi Construction
A K CONSTRUCTIONS
M/S SHAILZA TRADERS
M/S B.P. CONSTRUCTION
M/s Durgesh Kumar Mishra
M/S APARNA ASSOCIATES
stage.html
html • 0.08 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .