SPECIAL REPAIR TO ORS FAMILY MD ACCN UNDER ZONE-I AREA AT JAIPUR MIL STN

Amount

Taking down cement plaster or cement lime plaster on PCC/stone surface/ brick surfaces/ceiling etc. including raking out joints hacking for key scrubbing down with water etc including removing outside MD land complete all as specified and directed.

Demolition/Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiling to store and rubbish off the premises etc including removing outside of MD land complete all as specified and directed.

Demolition Cement concrete (unreinforced) concrete in ground floors and paving not exceeding 15 cm thickness (below or above ground level) etc including removing outside MD land complete all as specified and directed.

Demolition Cement concrete (unreinforced) concrete of any description and in any position or otherwise specifically provided etc including removing outside MD land complete all as specified and directed.

Demolition Cement concrete (unreinforced) concrete in roofs, floors (other than ground floors ), beams, staircases, landing, chajjas and similar suspended work including removing outside MD land complete all as specified and directed.

Demolition of reinforced cement concrete in roofs, floors (other than ground floors ), beams, staircases, landing, chajjas and similar suspended work including removing outside MD land complete all as specified and directed.

M&L for rendering 15mm thick on brick masonry surfaces or surface other than fair faces of brick work on wall CM (1:4) on walls finished even and fair without using extra cement etc complete all as specified and directed.

M&L rendering 15mm thick on stone masonry surfaces or surface other than fair faces of brick work on wall in CM (1:6) finished even and smooth without using extra cement etc complete all as specified and directed.

M&L for rendering 15mm thick on stone masonry surfaces or surface other than fair faces of brick work on wall CM (1:4) on walls finished even and fair etc complete all as specified and directed.

M&L for rendering 5 mm thick in CM (1:3) on ceiling/ceiling patches finished even and fair without using extra cement etc complete all as specified and directed.

Taking down and re-fixing after easing of shutters of any description, area exc 1.00 Sqm each but not exc 2.00 sqm each in the same opening complete all as specified and directed.

M&L non skid ceramic tiles (coloured) 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matchincluding providing 15mm thick screed bed in CM (1:6) etc complete all as specified and directed.

M&L joint free non skid ceramic tiles (coloured) 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in shirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including providing 10mm thick backing coat in CM (1:4) etc complete all as specified and directed.

M&L joint free non skid ceramic tiles (coloured) 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including providing 15mm thick screed bed in CM (1:6) etc complete all as specified and directed.

S&F joint free coloured glazed ceramic tiles in vertical surface 300x 200x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including providing 10mm thick backing coat in CM (1:4) etc complete all as specified and directed.

M&L for Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in 15 mm thick screed bed cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

M&L for 25mm thick cement concrete (1:2:4) type B-1, using 20mm graded aggregate in sub floors, sub base floors and paving. etc complete all as specified & directed.

M&L for 20-25 mm thick machine cut kota stone slab size 550x550mm in flooring laid over 15 mm thick screed bed or bedding layer of cement mortar (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including grooving, rubbing and polishing etc complete all as specified & as directed.

M&L for grinding/cutting & polishing the old kota stone flooring complete treated the surface with bee wax polish etc complete all as specified & as directed.

M&L for 20-25 mm thick machine cut kota stone slab in riser of steps, skirting, dedo and pillar laid over cement screed 10 mm thick in cement mortar (1:4), laid and jointed with gray cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing etc complete all as specified & as directed.

Rounding to edges of stone slabs (Kota stone) one edge, such as in steps and other similar situations etc complete all as specified and directed.

Rounding to edges of stone slabs (Granite) two edges such as in cooking platform and other similar situations etc complete all as specified & as directed.

S&F 18 mm thick plywood (High density high moisture resistant) board of one side colour laminate and other side decorative sanmica 1.25mmmthick laminated as in kitchen cabinets fixed with minifix hardware where ever required including edge band 22 mm wide 0.80 m thick matching colour on exposed surfaces of board fixed with polymaster adhessive including trimming edges of edge band to true line of thickness of board by manual trimmer complete all as directed Make: Action Tesa or equivalent in Rajshri plastiwood /Greenply/Century plywood/ Pearlwood. Adhessive Make:- REHAU or equivalent in

S&F 8 mm thick plywood (High density high moisture resistant) board one side colour sanmica 1.25mm thick laminate and other side non/un decorative as in back of kitchen cabinets.etc complete all as specified and directed. Make: Action Tesa or equivalent in Rajshri plastiwood /Greenply/Century plywood/ Pearlwood.

S & F auto close hinges, stainless steel of grade SS-304, bright finish fixed etc complete all as specified and directed. (Make : Hettich or equivalent in)

S & F stainless steel handles of size 100 mm fancy type of approved make complete all as specified & directed

S&F sinks made of stainless steel 18 gauge of Grade SS-304 for kitchen with plugs, washers and wastes including fixing cantilever brackets and connecting union to pipe, waste pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified & directed

Taking up or down 15mm dia bore steel tubing and connections including cleaning and re-fixing the same complete all as specified & directed.

Taking up or down 20mm dia bore steel tubing and connections including cleaning and re-fixing the same complete all as specified & directed.

S&F in repair for 15 mm GI tubing medium grade with all fitting and fixed to walls of concealed or fitted to ceiling or laid in under floor etc complete all as specified & directed.

S&F in repair for 20 mm GI tubing medium grade with all fitting and fixed to walls of concealed or fitted to ceiling or laid in under floor etc complete all as specified & directed.

S&F in repair bib taps 15mm bore long body cast copper alloy CP fancy type, with crutch or butterfly handle, screwed down, screwed for iron pipe or for union complete all as specified and directed. Make :- Hindware Cat Part No : F330011 or equivalent in

S&F in repair bib taps 15mm bore short body cast copper alloy CP fancy type, with crutch or butterfly handle, screwed down, screwed for iron pipe or for union complete all as specified and directed. Make :- Hindware Cat Part No : F330003 or equivalent in

S&F in repair bib taps 15mm bore swan neck, cast copper alloy CP fancy type, with crutch or butterfly handle, screwed down, screwed for iron pipe or for union complete all as specified and directed. Make :- Hindware Cat Part No : F330024 or equivalent in

S&F in repair pillar taps 15mm bore swan neck, cast copper alloy CP fancy type, with crutch or butterfly handle, screwed down, screwed for iron pipe or for union complete all as specified and directed. Make :- Hindware Cat Part No : F330034 or equivalent in

S&F in repair CP brass towel rail 20mm dia, D type 60cm long etc complete all as specified & directed. Make :- Nibko or equivalent in

S&F double Soap dish, CP brass 'R' type fixed to plugs with chromium plated brass screws complete all as specified and directed

S&F in repair Brass chromium plated shower rose 125mm x 125 mm size with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed

S & F in repair 15 mm dia Angle valve, cast copper alloy chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions & fixed complete all as specified and directed Make :- Hindware Cat Part No : F330043 or equivalent in

S&F in repairs 15mm bore PVC connections, with PTMT nuts of length 450mm etc complete all as specified and directed.

S&F in repair 20mm bore gate valve gun metal screwed down high pressure with iron wheel head screwed both ends for iron pipe or for union complete all as specified and directed.

S&F wall mixer CP hot & cold, 15mm bore with L-bend connection to overhead shower, bright finish ,screwed the ends for iron pipe and plugging etc complete all as specified and directed.

S&F in repair corner glass self large 300mmx300mm with brass brackets etc complete all as specified & directed. Make : code ACN-CHR-1173 make: Jaquar or equivalent in

S&F in repairs vitreous china squatting pan, `Orrisa' pattern, size 580 x440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) including providing connection and lime concrete bedding to making good to floor etc complete all as specified & directed.

S&F in repairs PVC valve less, syphonic action type flushing cistern 10 litres capacity, low level, white, with inlet ball valve, float and handle including brackets and flush pipe of polyethylene of low or high density or PVC,32mm dia suitable for low level cistern etc complete all as specified & directed.

S&F in repairs Vitreous China wash hand basin white flat black size of (580 X 400)mm including brackets for fixing and cutting for and pinning in ends of brackets or erecting stand trap etc complete all as specified & directed.

S&F 32 mm bore PVC waste pipe 75 mm long etc complete all as specified and directed.

Demolition of brickwork or stone/boulder masonry, built in lime mortar including all quions, arches, pillars etc, but excluding ashlar facings, dressed stonework and precast concrete articles and removal all rubbish material outside of MD Land etc complete all as specified & directed.

M&L for Brick work sub class B bricks straight or curved on plan exceeding 6 mtr mean radius built in cement mortar (1:6) etc complete all as specified and directed.

M&L brick work in half brick thick wall using Sub class B bricks built in cement mortar (1:6) etc complete all as specified and directed.

M&L Walling of random rubble, brought up to courses well bonded, bedded and solidly hearted built in cement mortar (1:6) complete.

M&L for keyed pointing to random or polygonal rubble or uncoarsed or brought to up to coarses in CM 1:4 etc complete all as specified and directed.

Dismantling of 75mm bore cast iron soil/waste pipe alongwith fittings and accessories jointed in cement mortar and taking out from walls, floors or from trenches, if required complete all as specified and directed.

Dismantling of 100mm bore cast iron soil/ waste pipe alongwith fittings and accessories jointed in cement mortar and taking out from walls, floors or from trenches, if required complete all as specified and directed. Note : For item No. 53 & 54. The length shall be measured along the centre line including fittings and accessories).

Dismantling of 75mm bore AC soil/ waste pipe alongwith fittings and accessories jointed in cement mortar and taking out from walls, floors or from trenches, if required complete all as specified and directed.

Dismantling of 100mm bore AC soil/ waste pipe alongwith fittings and accessories jointed in cement mortar and taking out from walls, floors or from trenches, if required complete all as specified and directed. Note For item No. 55 & 56. The length shall be measured along the centre line including fittings and accessories).

S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors etc complete all as specified & directed.

S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls etc complete all as specified and directed.

S&F 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors etc complete all as specified & directed.

S&F 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls etc complete all as specified and directed.

S&F 110mm bore PVC (SWR) junction single, (single T), equal or unequal etc complete all as specified and directed.

S&F 110mm bore PVC (SWR) bends (any radius) provided with access door etc complete all as specified and directed.

S&F 75mm bore PVC (SWR) junction single, (single T provided with access door), equal or unequal etc complete all as specified and directed.

S&F 75mm bore PVC (SWR) bends (any radius) etc. complete all as specified and directed.

S&F 75mm bore PVC (SWR) branch piece, double (double y) complete all as specified and directed.

S&F 110mm bore PVC (SWR) vent cowl etc complete all as specified and directed.

M&L PVC(SWR) floor trap/ nahani trap, plain with grating including jointing to waste pipe with solvent cement dia of outlet 75 mm etc complete all as specified and directed.

S&F salt glazed stone ware gully traps square or rounded mouthed type P or S of size 150 x 150cm including excavation earth work concrete in Beds, surrounds kerbs etc complete all as specified and directed.

S&F PVC clamps for rain water , soil, waste pipe including bolts if required for securing/ holding in position pipes of dia 75 mm etc complete all as specified and directed.

S&F PVC clamps for rain water , soil, waste pipe including bolts if required for securing/ holding in position pipes of dia 110 mm etc complete all as specified and directed.

S&F mild steel chromium plated grating doom 100 mm dia with waste hole etc. complete all as specified and directed.

S&F mild steel chromium plated grating doom 100 mm dia complete all as specified and directed.

S&F capacity of 500 Litres rotational moulded polyethylene water storage tanks double layered (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including dismantling of old water tanks etc complete all as specified & directed.

S&F ball brass valves, high pressure, with polythene float and fly-nut complete, screwed for iron pipe or brass ferrule and fixed of pipe in 20mm etc complete all as specified & directed.

Taking down chowkats or frame with shutter (without taking off shutters from the frame) not exceeding 1.5 sqm each and removing to store etc complete all as specified and as directed.

Taking down chowkats or frame with shutter (without taking off shutters from the frame) exceeding 1.5 sqm but not exceeding 4 sqm etc complete all as specified and as directed.

Taking down shutters of any description exceeding 1 sqm and not exceeding 2.00 each and removing site etc complete all as specified and directed.

S & F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube in opening etc complete all as specified and directed.

S&F in the frames at site factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement etc complete all as specified and directed.

S&F factory made 35mm thick flush shutter plain framed, panelled shutter (two panel ) with lock rail and panel of 9mm B.W.P. or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and style as per IS : 1003 (Part-I), kiln seasoned and chemically pressure treated 2nd class HW rail and style etc complete all as specified and directed.

S&F 35mm thick second class hardwood factory made glazed and skeleton door shutters open rebated of second class hard wood rail and styles(Hollock), prepared to receive glass/gauge etc divided into square , with plain, chamfered or rounded, mitred and rebated sash bars any numbers , fitted with cut and mitred beads for securing glass/gauge etc. The size of rails & style as specified in SSR Part-I (2009) section 8 and as per IS-1003(Part-I) kiln seasoned as per IS-1141 and chemically pressure treated as per IS-401 etc complete all as specified and directed. Note:- Glass/gauge shall be measured and paid for separately

S&F 35mm thick factory made partly gauzed and partly panelled skeleton door shutters open rebated of second class hard wood rail and styles(Hollock), prepared to receive glass/gauge etc without sash bars, edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass/gauge etc. The size of rails & style as specified in SSR Part-I (2009) section 8 and as per IS-1003(Part-I) kiln seasoned as per IS-1141 and chemically pressure treated as per IS-401 etc complete all as specified and directed. Note:- Glass/gauge shall be measured and paid for separately

S&F stainless steel cloth 0.36mm nominal dia of wire and 1.40mm average aperture and fixed with stain less steel wire staples etc complete all as specified and directed.

S&F in repair stainless steel cloth 0.36mm nominal dia of wire and 1.40mm average aperture and fixed with stain less steel wire staples etc complete all as specified and directed.

S&F aluminium mesh of weight exc.0.55 Kg/Sqm as support to stainless steel wire cloth etc complete all as specified and directed.

S&F framed work such as door frame grills, gratings, etc, with ends of bars shouldered and / or riveted, or forged into spikes ; framed guard bars ; barred iron doors ; ladders; framed balusters; walkways ; railings ; framework of water tanks and similar work conforming to Fe-290 Gde E-165 etc complete all as specified and directed.

S&F of 100 mm butt hinges medium weight cold rolled mild steel, ISI marked, fixed to angle iron chowkhat including welding etc complete all as specified and directed.

S&F Mild steel chromium plated sliding door bolts 250mm long, plate type, stove enamelled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed etc complete all as specified and directed.

S & F stainless steel handles cast moulded type 150mm size fixed with screws etc complete all as specified and directed.

S&F stainless steel barrel tower bolts not less than 12mm dia of extruded section and fixed 200mm length of bolt etc complete all as specified and directed.

S&F in repair 75mm long door stopper of stainless steel body and two rubber shoes etc complete all as specified and directed.

S&F mild steel Helical door spring150mm long including roller and roller plate complete fixed to angle iron chowkats etc complete all as specified and directed.

S&F in repair pressed steel factory made cupboard and loft shutter with frame of 1.25mm thick and shutter 1mm thick PBI sheet with 6 Nos 3.15mm thick and 100mm long steel hinges Godrej pattern locking arrangement including 12mm dia vertical rod. Shutters shall be spray painted in factory (total width includes frame width) etc complete all as specified and directed.

S&F steel window with side hung shutters factory made including box type hinges with steel handle and steel peg stay complete with glazing bars dovetailed or welded including taking down old etc complete all as specified and directed.

S&F in repair steel window with side hung shutters factory made including box type hinges with steel handle and steel peg stay complete without glazing bars dovetailed or welded including taking down old etc complete all as specified and directed. (Note: Mild steel wire cloth shall be measured and paid separately under respective items)

S&F factory made steel ventilator with top hung shutter with glazing bars including hinges, steel peg stay and handle etc complete all as specified and directed.

S&F of 3mm thickness sheet glass, ordinary quality and glazing with oil putty in square not exceeding 0.5sq.m in each pane etc complete all as specified and directed.

S&F in repair 25 mm dia stainless steel drapery rod grade SS-304 medium weight etc complete all as specified and as directed.

S&F stainless steel brackets/ end brackets grade SS-304 for holding drapery rod etc complete all as specified and as directed.

S&F stainless steel finials suitable for 25mm dia SS 304 grade drapery rod etc complete all as specified and as directed.

M&L for preparation of new steel surfaces of any description over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide zinc chrome primer etc complete all as specified and as directed.

M&L for preparation old untreated steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint over etc complete all as specified and directed

M&L for preparing new wooden surfaces/untreated wooden or wooden based of any description exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer etc complete all as specified and directed.

M&L for preparation of old painted wooden surface of any description exceeding 10 cm width or girth and applying one coats of synthetic enamel paint over etc complete all as specified and directed.

M&L for WPT in sunkan floors as described are as under:- Sunken floor and sides up to finished floor level shall be plastered with 15 mm thick cement plaster in CM 1:4 mixed with water proofing liquid @ 150 ml per bag of cement. (ii) Preparing plastered surfaces and providing APP polymeric water proofing membrane , minimum 3 mm thick and weighing not less than 3.0 kg/ sqm, black finish reinforced with non-woven polyster matt, with a thermo fusible finish laid over compatible bitumen primer (Bitumen primer shall be TANK MASTIC of M/S STP Ltd or EMW Flate' of M/S Texas India Ltd) at the rate of 0.40 Ltr/Sqm torching overlaps with a propane or a butane gas torch , with a overlap of 75mm at the sides and 100mm at the ends sealing including applying a coat of cold emulsion bituminous primer all as per manufacturer's instructions including preparation of surface and filling lime concrete 1:5:10 type E2 with brick bats complete all as specified an as directed Note :- (i) Polymeric membrane shall be laid in sunken floor and on sides up to finished floor level. (ii) The waterproofing treatment shall be got carried out by the manufacturer or their authorised applicators. (iii) Above aspects are deemed to be included in quoted rate. (iv) Supply only water proofing liquid shall be measured and paid separately Note: Slab area only will be measured for payment purpose. MAKE:- super thermolay manufactured by STP ltd, Hyper Plas (Polyster) manufactured by M/S IWL Ltd, 'Shatiplas' (Polyster) manufactured by M/S Capital Steels and chemicals Pvt Ltd or equivalent in

M&L preparing newly plastered surfaces and applying two coats of distemper with distemper oil emulsion white or tinted by mechanical means over a coat of primer over a coat of wall care putty to make smooth the undulated surfaces etc complete all as specified and directed

M&L for complete removal of existing treatment on walls, including cleaning of any mortar drops, fungus efflorescent salts etc and preparation of old plastered surfaces and applying two coats of distemper with distemper oil emulsion white or tinted by mechanical means over a coat of primer over a coat of wall care putty to make smooth the undulated surfaces etc complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall and applying two coats of exterior emulsion paint by mechanical means over a coat of primer etc complete all as specified and directed.

M&L complete removal of existing treatment of old plastered surfaces of walls and washing, rubbing down and stopping of painted surfaces and applying two coats of exterior emulsion paint by mechanical means over a coat of primer etc complete all as specified and directed.

M&L for preparation of old plastered surfaces of walls & applying two coats of white wash by mechanical means etc complete all as specified and directed.

M&L for preparation of newly plastered surfaces & applying three coats of white wash by mechanical means on ceilings etc complete all as specified and directed.

M&L complete removal of existing treatment of old plastered surfaces of ceiling and washing, rubbing down and stopping of painted surfaces & applying two coats of white wash by mechanical means etc complete all as specified and directed.

M&L cement concrete, Type B1, (1:2:4) using 20 mm graded aggregate in lintels upto 1.5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses parapets and railings upto 60 cm in height, copings kneelers, apex stones bed plates, water trough and like including weathering,slightly rounded or chamfered angles and throating, etc complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar 1:4 on fair faces of concrete surfaces of roof surfaces mixed with WPC @ 3% by weight of cement finished even & smooth including taking down existing water proofing treatment etc complete all as specified & directed.

M&L for roof treatment as under : (a) Water proofing cell be carried out after scraping and properly cleaning the surfaces to remove to loose particles with wire brushes complete in all respect as per manufacturer’s instructions and as directed by EIC (b) Apply fiber reinforced, UV resistant elastomeric liquid applied water proofing & heat reflective coating with acrylic polymers & polyester/glass fivers. (c) Water proofing treatment shall be done in three coats with primer as manufactures instr. The thickness of primer and coating and the method, methodology of application, gap between successive coating shall be maintended as per manufacturer’s instructions to the contractor Make:- Sika, Asian or equivalent in

M&L for PCC tiles of size 300 x 300 x 22 mm with grey cement & no pigment set jointed and pointed in neat cement slurry over 15 mm thick screed CM (1:3) mix with powder water proofing 1 kg per bag of cement integral compound on roof surfaces etc. complete all as specified and directed.

M&L 75 mm thick cement concrete (1:3:6) type C-2 using 40mm graded stone aggregates as in floor/plinth protections finished even and fair without using extra cement including filling the expansion joints with bitumen filler/filler boards etc complete all as per specified and directed.

M&L 75 mm thick cement concrete (1:4:8) type D2 using 40mm graded aggregate as in sub base of flooring etc complete all as specified and directed.

M&L factory made machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade, with grey cement laid over and including 25mm thick sand cushion layer etc complete all as specified and directed.

M&L cement concrete (1:3:6) type C-1 using 20mm graded stone aggregate as in bed blocks, coping, kerb stone etc including necessary form work etc complete all as per specified and directed.

S&F in repair plate rack of size 750mmx600mmx250mm fabricated out of 0.6mm thick stainless steel sheet etc complete all as specified and directed.

Dismantling/chipping of unsound loose concrete & Replacing distressed/loose/cracked/ porous carbonated, loose part of concrete with fibrous micro concrete and repairing the damaged surface of concrete fix the formwork/ shuttering across the profile of damaged structural element, pour the free flow ready mix micro concrete mix prepared by mixing each kg of micro concrete ready ix with required amount of water as directed by manufactrurer instructions in the formwork to achive the consistency. Micro concrete should be mixed in steel tray homogeneously makeup concrete is based on type of structural element and its location. The work should be carried out with all safety measures like helmet, safety belt and under supervision of qualified supervisor etc. complete all as specified and directed. Make : Sika, Pidilite, AAKYA WATER PROOFERS Pvt. Ltd. Fosroc, Choksey, Krishna Conchem Products Pvt Ltd. (KCPPL) Note:- (i)The contractor will submit third party Guarantee through manufacturer (ii) Steel reinforcement shall be measured & paid separately under respective item (iii) Formwork shall be measured & paid separately under respective item

M&L for dismantling / taking down old existing unserviceable cement plaster, loose / unsound weaken cement concrete of any description and in any position from existing external / internal surfaces of RCC / slab / beam / columns RCC, facias of overhead reservoir etc to a average depth of 15mm with power driven pneumatic chisel and removal of debries upto the approved municipal dumping ground outsides MoD land including cutting of all making square / rectangular cavities roughening the smooth surfaces etc. complete all as specified and directed.

M & L for 15mm thick polymer mortar to load carrying RCC members in two layers in proportion of 1:5:15 by weight of polymer of approved make and quality, cement and quartz sand with required WC ratio for desired consistency and applying and finishing by floating, curing after initial setting time etc. as per manufacturer specification etc. complete all as specified and directed. Make : Sika, Pidilite, AAKYA WATER PROOFERS Pvt. Ltd. Fosroc, Choksey, Krishna Conchem Products Pvt Ltd. (KCPPL) Note:- (i)The contractor will submit third party Guarantee through manufacturer (ii) Formwork shall be measured & paid separately under respective item

M & L for 30mm thick polymer mortar to load carrying RCC members in two layers in proportion of 1:5:15 by weight of polymer of approved make and quality, cement and quartz sand with required WC ratio for desired consistency and applying and finishing by floating, curing after initial setting time etc. as per manufacturer specification etc. complete all as specified and directed. Make : Sika, Pidilite, AAKYA WATER PROOFERS Pvt. Ltd. Fosroc, Choksey, Krishna Conchem Products Pvt Ltd. (KCPPL) Note:- (i)The contractor will submit third party Guarantee through manufacturer (ii) Formwork shall be measured & paid separately under respective item

M&L for Mild steel TMT bars 6 to 8 mm dia, cut to length, bent to shape required, including cranking , bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as per specified and directed.

M&L for Mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking , bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips etc. complete all as per specified and directed.

S & F steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes confirming to I.S. 1161-1998 grade St-240 etc complete all as specified and directed.

S&F pre painted galvalume aluminium zink coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws and washers etc complete all as specified and directed.

M&L for retrieving pepal plants from walls roofs, chajja of buildings upto double storey height including taking out deep roots and poring Hcl acid and making good the disturbed surfaces with CM 1:4 etc complete all as specified and directed.

M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick (Horizontal or sloping) Rough finished surface of concrete flat. etc complete all as specified & directed.

M&L formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilivers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. rough finished surface of concrete flat etc complete all as specified & directed.

M&L formwork to sides of pillars, posts, structs, piers, columns and stanchions. rough finished surface of concrete Square, rectangular or polygonal. etc complete all as specified & directed.

M&L for RCC M25 (20 mm graded stone aggregate ) as in slabs supported on walls beams & columns in floors , roofs, balconies etc.

Taking down carefully surface aluminium or copper point wiring with PVC casing capping or conduit (light, fan, socket, bell or power) including fixture and fittings such as switches, ceiling rose, regulators, sockets, light fittings etc and making good disturbed surfaces etc complete all as specified & directed.

M&L for point wiring with 1100 volts grade PVC insulated FRLS multistranded copper conductor cable 1.5 Sq mm (Phase - Red, Neutral - Black) and earth continuity conductor 1.5 Sq mm (Green) drawn into and including concealed rigid non-metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all conduit fittings / fixing accessories and unwelded sunken galvanized pressed steel terminal boxes of thickness not less than 1.2 mm covered with 3 mm thick phenolic laminated white sheet cover for mounting switches, sockets, fan regulators as required for the following :- (Note - Cost of cutting of chases in stone masonry and making good disturbed surfaces for concealing the conduit shall deemed to be included in quoted rate of point wiring) complete all as specified and directed.

(a) One light point controlled by one switch.

(b) One fan point controlled by one switch.

(c) One socket outlet 6 amp controlled by one switch on the same board with other switches.

(d) One socket outlet 6 amp controlled by one switch on independent board.

(e) One light point controlled by two, two way switch.

(f) One bell point controlled by one bell push.

M&L for point wiring with 1100 volts grade PVC insulated FRLS multistranded copper conductor cable 4.0 Sq mm (Phase - Red, Neutral - Black) and earth continuity conductor 4.0 Sq mm (Green) drawn into and including concealed rigid non-metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all conduit fittings / fixing accessories and sunken galvanized pressed steel terminal box of thickness not less than 1 mm covered with 3 mm thick phenolic laminated white sheet cover for mounting switches, sockets as required for one 16 amp socket outlet point controlled by one switch on independent board.

S&F switch piano flush button single pole one way 6 Amp 230 volts etc. complete all as specified and directed.

S&F switch piano flush button single pole one way 16 Amp 230 volts etc. complete all as specified and directed.

S&F socket outlet 2 in 1, 3 pin, 6 & 16 Amps flush type 230 volts etc. complete all as specified and directed.

S&F socket outlet 2 in 1, 2 & 3 pin, 6 Amps flush type 230 volts etc. complete all as specified and directed.

S&F ceiling rose 6 amp, 3 plates polycarbonate body etc. complete all as specified and directed.

S&F hum free electronic step fan regulator 120 - 280 volts of 100 watt capacity (socket type) including connecting up etc. complete all as specified and directed.

S&F switch piano flush button single pole two way 16 Amp etc. complete all as specified and directed.

S&F of bell push, flush type, 6 Amp 230 Volts etc. complete all as specified and directed.

S&F of call bell, AC, 230 Volts, SP etc. complete all as specified and directed.

S&F lamp holder, angle type, polycarbonate type with back plate suitable for batten fittings etc complete all as specified & directed.

Supply and fixing LED light fitting mirror type with high output diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size etc. complete all as specified and directed.

Supply and fixing LED lights fitting 1x 16W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling etc. complete all as specified and directed.

S&F LED light fitting 1x9W/1X10Wbulkhead luminaries including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size etc. complete all as specified and directed.

M&L for submain wiring along with earth continuity conductor with PVC insulated FRLS multistranded copper conductor cable (Phase - Red, Neutral - Black, Earth - Green) drawing into and including concealed rigid non metallic PVC conduit, medium grade, ISI marked ivory colour along with accessories of nominal sizes 2x6 sqmm + 1x6 sqmm earth wire in 25 mm dia conduit.

Earthing complete with galvanised steel earth plate electrode 600 mm x 600 mm x 6mm thick buried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of plate not less than 1.5 meters below normal ground level. connecting to the GI wire 4 mm dia by means of bolls, nuts, check nuts and washers of galvanised iron and earth wire protected by provision of GI light grade pipe 15 mm bore including provision of concrete pit in PCC (1:2:4) type B-1 using 20mm graded stone aggregates with 40mm thick cover of RCC (1:2:4) reinforced with XPM weight not less than 4 Kg/Sqm) and frame of angle iron 25x25x6mm with lugs 02 Nos and handle of 6mm dia MS bar made to shape, GI medium grade 20mm bore pipe for watering , perforated at bottom. 1.75 metre long placed on top edge of earth plate. Charcoal and common salt filling with fixing arrangement, funnel wire mesh and earth work in soft soil returing filling in and removal of surplus soil to a distance not exceeding 50 meters all as per electrical plate 3 of SSR-2009 Part-I and connecting to earth test point all as specified or indicated including testing on completion

S&F MCB distribution board, powder coated, CRCA steel sheet, degree of protection IP 43, IK-09 with reversible double door, recess mounted , having insulated 100 Amps tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces as required for the SPN, 240 volts, 8 ways etc. complete all as specified and directed.

S&F MCBs of 'C' series having breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs of following ratings:-

(a) MCB SP 6-32 Amps 240Volts

(b) MCB DP 20 to 32 Amps 240 Volts

Supply , installation, testing and commissioning of LT panel board fabricated out of 2mm thick stainless steel (SS 316) with copper bus bar 4 pole equal of capacity in colour code R, Y & B 100 Amps 415 Volts indoor type wall mounted of size not less than 750mmx650mmx250mm , installed of porcelain insulators with bus bar chamber. The panel shall be dust and vermin proof, protection class IP42, front opening and compartmental type with approach for cable entry and for easy maintenance dully internally wired with FRLS, PVC insulated standard copper conductor cable of 1.0 Sqmm including LED indicator for R, Y & B and comprising of the following Incoming :- MCCB 125 Amps 4 Pole 16 KA 415 Volts, 70-100%, 50 HZ-01 Nos Outgoing :- MCB DP 10 KA ‘C’ series 40 Amps- 05 Nos

Schedule of Credit

UNIVERSAL INFRAPROJECT PVT LTD

M/S JALANDRA CONSTRUCTIONS

JAGDAMBA CONSTRUCTION COMPANY

J.J.ENGINEERING