GE 874/EWS-37/2022-23

Amount

B/R and E/M Portion

Surface excavation n.exc 30 cm deep and averaging 15 cm deep and getting out in any type of soil.

Earth work excavation in trenches n.exc 1.5m wide & 1.5m depth and getting out in any type of soil.

Returning filling in including spreading leveling watering & well ramming in layers n.exc 25cm thick all as specified.

Removing excavated materials soil n.exc 50m and depositing where directed at a level n.exc 5m above the starting point.

Demolition of cement conc (Un-reinforced) in ground floors and pavings n exc. 15cm thick. (below or above ground level).

75mm thick plain cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in sub base or floor complete all as directed by Engr-in-Charge.

M&L for 40mm thick PCC 1:2:4 Type B-1 (using 20mm graded agg) as in sub base under flooring.

M&L Non skid ceramic coloured tiles 7-8 mm thick,area exc 0.11sqm but nexc 0.18 sqm of each tile in floor etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile on 15mm thick screed bed in CM 1:4 over 25mm thick PCC 1:2:4 type B0 (using 12.50mm graded crushed stone agg).

M&L Non skid ceramic coloured tiles 7-8 mm thick,area exc 0.06sqm but nexc 0.11 sqm of each tile in floor etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile on 15mm thick screed bed in CM 1:4 over 25mm thick PCC 1:2:4 type B0 (using 12.50mm graded crushed stone agg).

M&L machine cut kota stone slab flooring 20-25mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over 20mm thick screed bed in CM 1:6 over 25mm thick PCC 1:2:4 Type B0 (using 12.50mm graded crushed stone aggregate complete all as specified by Engr-in-charge.

M&L Chequered cement concrete tiles (200x200x25mm) thick with grey cement and no pigment, set jointed & pointed in neat cement slurry in floors over 15 mm thick screed bed of 1:4 cement mortar.

M&L 50 mm thick PCC 1:3:6 type C-2 (using 20 mm graded crushed stone aggregate ) as in plinth protection finished even aned fair without using extra cement all as specified.

M&L PCC 1:4:8 type D-2 using 40mm graded stone as in foundation filling and mass concrete.

M&L Plain Cement Concrete Type C-2, 1:3:6 (40mm graded aggregate) as in surface channel or drains complete all as specified.

M&L for extra for formig fair finished drain or channel 30 cm inner girth in cement concrete using extra cement, including forms, moulds, mitred/stopped ends etc.

M&L for Screed bed or bedding layer of cement mortar 1:4, 20mm thick for laying floor finishes.

M&L for Granite 18 to 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl rounding edges complete all as specified.

Dismantling of floor, hearth or wall tiling including cement mortar bedding removing rubbish off the premises complete all as directed.

M&L for coloured glazed ceramic tiles as in skirting/ dado (350x250 or 450x350) x 7mm thick, set and jointed in neat cement slurry and pointed in coloured cement to match colour of the tile over backing coat/screed bed 10mm thick in CM1:4 on fair faces of brick/stonewall surffaces for laying dado/skirting complete all as specified and directed by Engr-in-Charge.

Dismantling plain or corrugated steel sheeting,any gauge ,thickness including Nainital or similar pattern roof covering including necessary scaffolding, any type, any location/height complete all as specified and directed by Engr-in-Charge .

S&F Pre-painted galvalume aluminium zink coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550MPa as in roof covering/cladding to wall, fixed with self tapping screw including necessary scaffolding, upto four storey bldg complete all as specified and directed by Engr-in-Charge.

S & F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including necessary scaffolding, upto four storey bldg complete all as specified and directed by Engr-in-Charge.

Dismantling wall and ceiling boards or insulation boards/slabs/blankets, any thickness including cover fillet.

M&L plywood grade BWR type BB, 6mm thick fixed with nails to timber frame work in ceiling.

M&L plywood grade BWR type BB, 6mm thick fixed with nails to timber frame work in lining.

All as per item above but except plywood.

M & L Plain fillets 2nd class soft wood of exc. 3 & n.exc. 6 Sqcm, square rectangular or triangular in section , clean swan, secured nails.

M&L for Preparation of newly un treated surfaces and applying two coat of synthetic enamel paint pver a coat of pink primer on wooden surfaces of any description not other wise described over 10 cm width or grith etc complete all as specifed and as directed.

M&L for Preparation of old painted surfaces and applying one coat of synthetic enamel paint on wooden surfaces of any description not other wise described over 10 cm width or grith etc complete all as specifed and as directed.

Dismantling timber scantling 40 Sqcm and over in section in any position in unframed work .

Dismantling timber scantlings under 40 sq. cm and over in section, in any position, unframed work as in fillets, rails, posts, rafters,purlins etc complete all as specifed and directed.

M & L second class soft wood in scantling clean swan below or above ground level upto four storey bldg, complete all as specified and directed by Engineer-in-Charge.

All as per item above but except timber.

Dismantling of boarding of any description fitten in any position with nails.

S&F 25mm thick 2nd class softwood boarding in floor, planed one side, with butt joints and fixed with nails

All as per Item Above but except timber.

S&F 20mm thick 2nd class softwood boarding , planed one side , with butt joints and fixed with nails in facia eaves boarding complete all as specified and direced by Engr-in-Charge.

M&L 2nd class softwood weather boarding clean sawn, plain 20mm thick or feather edged 15mm to 20mm thick and fixed with 30mm laps.

All as per item above but fixing only.

M&L 18/19mm thick Prelaminated particle board interior grade, Prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with screws including fitting and fixtures etc complete all as specified and as directed.

S&F 18/19mm thick plywood BWR grade fixed to timber frame work complete all as specified and as directed.

Taking down chowkat with shutters exc.1.5 Sqm but n exc.4 Sqm(without taking off shutters from chowkhat) complete all as specified and directed by Engr-in-Charge.

Taking down chowkat with shutters n. exc.1.5 Sqm (without taking off shutters from chowkhat) complete all as specified and directed by Engr-in-Charge.

S & F 2nd class soft wood plain solid straight chowkats and frames wrought framed, rebated on the solid all as specified.

S&F factory made solid PVC door frame of size 50x47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specifed and as directed

S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & Bottom rails. MS frames shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Paneling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement.

S & F plain framed, panelled shutters 35mm thick 2nd class softwood, (any numbers of panels), with panels of timber flats on both sides,or of veneered particle board med density, wood particle board with commercial face or 9mm BWP plywood fitted to chowkat.

S & F glazed & skeleten shutters 35mm thick 2nd class softwood, open rebated and prepared to receive glass, gauze, etc, edges of framing plain, chamfered or rounded, fitted with cut & mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Part I Section 8 clause 8.24 (a) fitted to chowkhats.

S & F glazed & skeleten shutters 30mm thick 2nd class softwood, open rebated and prepared to receive glass, gauze, etc, edges of framing plain, chamfered or rounded, fitted with cut & mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Part I Section 8 clause 8.24 (b) fitted to chowkhats.

Hacking out old broken glass (any thickness, size quality of description) from wooden frames or stone, concrete or brick sorrounds, glazad with putty or fixed with beads.

S&F sheet glass 3 mm thick, ordinary quality and glazing with oil putty in square n. exc 0.5 Sqm in each pane complete all as specified and as directed.

S&F frosted or grouded/obscured type sheet glass, 3mm thick and glazing with oil putty in squares n.exc 0.5 Sqm in each pane complete all as specified and as directed

S & F in Stainless Steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and as directed.

S&F 100 mm long butt hinges extruded aluminium anodised.

S&F 75 mm size mild steel butt hinges medium weight.

S&F 150mm long aluminium anodised barrel tower bolt of extruded section.

S&F 100 mm long aluminium anodised barrel tower bolt of exturded section

S&F 75 mm long aluminium anodised barrel tower bolt of exturded section.

S&F aluminium anodised alloy handles fabricated type 150mm size of handle.

S&F 100 mm long aluminium handles cast type anodised.

S&F 300mm long aluminium alloy, anodised sliding door bolt, with hasp and staple (bolt type) cast or extruded section and fixing bolts of extruded section.

S&F 300mm, MS ordinary rat tailrod pattern springs including roller and roller plate complete.

S & Fixed in repairs Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc complete all as specified and as directed.

Demolition of brick/stone masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashler facing, dressed stonework and precast concrete articles

M&L for brick work with sub class 'B' bricks straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:4 Complete all as specified and as directed.

M&L for brick work with sub class ‘B’ bricks straight or curved on plan to any radius in half brick walls in built in CM 1:4.

M&L for Random rubble masonry using sand stone uncoursed well bonded bedded and solidly hearted built in CM 1:4 complete all as specified and directed.

M&L Random rubble masonry using sand stone uncoursed well bonded bedded and solidly hearted ,built in CM 1:6 complete all as specified.

Ditto as per item above but except stone.

M&L for PCC 1:2:4 type B-1 (20mm graded aggregate) as in coping, plinth band, bed block including rounded or chamfered angle as directed including necessary formwork etc.

Taking down of cement plaster of any description including racking out of joints hacking for keys and scrubing down with water etc.

M&L Raking out joints/pointing to random rubble or polygonal rubble uncoursed or brought upto courses as in walls in cement mortar complete all as specified and as directed.

Rendering 15mm thick on stone masonry surfaces or other than fair faces in cement motar 1:4 finished even and smooth (without using extra cement).

M&L rendering 15 mm thick in cm 1:6 on fair faces of brick work or concerete surfaces finished even and smooth without using extra cement.

M&L Rendering 15mm thick in CM 1:4 mixed on other than fair faces of brick work or concrete surfaces .

M&L for Preparation new or undecorated surface of walls and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specifed and as directed.

M&L for preparation of new or undecorated surfaces of wall and applying 3 mm thick wall care putty and rubbing with sand paper to achieve a level and smooth to wall and applying two coats of acrylic distmper over a coat of primer complete all as specified and as directed.

M&L for Preparation of old decorated surface of walls and applying two coats of cement base paint including scrapping, rubbing, washing complete all as specifed and as directed.

M&L for Preparation of old painted surfaces and applying two coat of synthetic enamel paint on steel surfaces of any description not other wise described over 10 cm width or grith etc complete all as specifed and as directed.

S&F in repairs Vitreous China Wash down water closet pan (Pedestal pattern), white incl plastic water closet seat and cover closed pattern with flat bottom and mild steel chromium plated or aluminised hinging device & incl P or S trap and connection to trap and to the flushing system anti syphonage pipe etc (excluding flushing cistern and flush pipe) complete all as specified and as directed.

S&F Vitreous China Wash down water closet pan (Pedestal pattern), white incl plastic water closet seat and cover closed pattern with flat bottom and mild steel chromium plated or aluminised hinging device & incl P or S trap and connection to trap and to the flushing system anti syphonage pipe etc (excluding flushing cistern and flush pipe) complete all as specified and as directed.

S&F vitreous china squatting pan 'Orissa' pattern size 580x440mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and to flushing system anti syphonage pipe etc complete all as specified and as directed.

S&F in repairs vitreous china squatting pan 'Orissa' pattern size 580x440mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and to flushing system anti syphonage pipe etc complete all as specified and as directed.

S&F in repairs PVC valveless,syphonic action type, low level PVC flushing cistren 10 ltr cap white with flush pipe & all fitting complete all as specified.

S&F PVC valveless,syphonic action type, low level PVC flushing cistren 10 ltr cap white with flush pipe & all fitting complete all as specified.

S & F in repair Vitreous China Urinal, Half stall type, white with grating and union for discharge pipe including providing and fixing plugs with and including 60mm long brass screws, pointing around urinal back in cement with PVC 32mm dia waste pipe & waste coupling incl spreader complete all as specified.

Supply & Fixing in repairs Vitreous China Ware Wash hand basin white flat back size 550mmx400mm including pedestal, cutting for and pinning ends of brackets or erecting stand including necessary PVC outlet pipe, CP coupling 32mm dia complete all as specified.

S&F in repairs Stainless steel sink 1mm thick for kitchen fixed with plugs, washers and wastes, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm including providing 32mm dia LDPE waste pipe and waste coupling,complete all as specified and directed.

S&F in repair Chromium Plated Sink cock complete all as specified and as directed. Make: Essco or its equivalent.

S&F Stop valves cast copper alloy,fancy type ,chromium plated, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 15mm bore pipe, in repair.

S&F Bib taps cast copper alloy ,chromium plated,with crutch or butterfly handle screwed down screwed for iron pipe or brass ferrule of 15mm bore, in repair.

S&F in repairs pillar tap cast copper alloy, fancy type with capstan heads chromium plated screwed down with high pressure with or without lettered hot or cold with long screwed, shanks and fly nuts screwed for iron pipe 15mm dia complete all as specified and as directed.

S&F in repairs brass CP Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed.

S&F 1000 Ltr capacity PVC water storage tank (cylinderical vertical with closed top) and fixed in position all as specified in SSR Part -I, including dismantling of old tank.

S&F ball valves, high pressure, with polythene float and flynut complete, 20mm bore, in repair.

S&F 20mm bore gun metal globe or gate valve with iron wheel head, screwed both ends, in repair.

S&F in repair PVC connections 15mm size with PTMT nuts of length 450mm.

S&F PVC connection 15 mm length 450mm.

Taking up or down 15mm dia GI steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed.

Taking up or down 20mm dia GI steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed.

S&F GI tube 15 mm dia medium grade galvanished with all fittings laid in floors /wall etc. complete all as specified and as directed.

S&F GI tube 20 mm dia medium grade galvanished with all fittings laid in floors /wall etc. complete all as specified and as directed.

Dismantling of rain water pipe and sewage line pipe of any type and any size including fitting complete all as specified and as directed.

S&F 110mm dia PVC (SWR) pipes single socketed, in any length, laid in trenches or in floors / fixed to walls.

S & F bend suitable for 110mm dia PVC (SWR) pipe complete all as specified and as directed.

S&F PVC (SWR) bends any radius, 110mm bore, fitted with oval access door.

S&F 110mm bore PVC (SWR) junction, single (single T) equal or unequal with door access.

S&F 75mm dia PVC (SWR) pipes single socketed, in any length fixed to walls / floors or in trenches.

S&F PVC (SWR) bends any radius, 75mm bore, fitted with oval access door.

M&L PVC(SWR) floor trap, 75mm dia outlet, plain with grating including jointing with solvent cement.

S&F PVC (SWR) reducers any radius 110mm bore.

PVC (SWR) vent cowl 75mm dia.

Demolition of cement conc (Reinforced ) of any description and in any position not otherwise specifically provieded for (Below or above ground level) complete all as specified and as directed.

M&L for RCC 1:2:4 type B1 using 20mm graded stone aggregate as in Slabs supported on walls, lintel beams or shelves complete all as specified and directed.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and as directed.

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc all as specified.

M&L for Providing precast cement concrete as in cover slabs type B1 1:2:4 using 20 mm graded aggregate and set in cm 1:4.

M&L Mild Steel TMT bars 10mm dia and over, cut to length bent to shape required including cranking bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as spd & directed.

M&L Mild Steel TMT bars 5mm dia and over upto including 10mm dia in stirrups spaces and binders cut to length bend to shape required including mild steel wire ( annealed) not less than 0.9 mm dia all as spd and directed.

M&L for sand filling under floors or in foundation including watering and consolidation complete all as specified and as directed.

M&L Hardcore of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all a specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

S&F Mild Steel Work as in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as specified and directed.

S&F Mild Steel Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and directed.

Construction of 10 users septic tank (brick construction) including excavation in soft/ loose soil foundation in PCC 1:2:4, type B-1 ( using 20mm graded crushed stone aggregate) brick masonry in CM 1:4 RCC (M-30 design Mix) slab including cast iron manhole cover having 6mm plate embedded all around with angle iron frame vent shaft etc, complete, all as specified and shown on drawing No CESZ/TD-01/1086/2015

Construction of soakage well (brick masonry) of 1.2m internal dia and 3.00m deep below inlet level incl necessary earth work, filling with brick bats of gauge 40 to 80mm, SWG inlet pipe junction 150mm bore including all other relevant works, complete, all as specified and shown on drawing No.CESZ/TD-1104/2015

M&L 150mm dia SGSW pipe laid in trenches and jointed all as specified.

M&L for concrete bed to drain pipe including packing under and haunching against the sides of pipes after they are laid and tested in cement concrete 1:4:8 type D2 (using 40mm graded agg) for 150mm bore pipe all as specified.

Taking down carefully copper/ aluminium unserviceable/ perished point wiring (light, fan, socket or power complete including fixture and fittings such as switches, ceiling roses, pandents, regulators, sockets, light fittings,removing material from site for taking credit etc and making good disturbed surfaces of wall, floors, complete all as specifiecd and directed.

Taking down MCB DB's complete with MCB's / isolator etc removing materials from site and making good disturbed surfaces of walls, floor etc complete all as specified and directed.

M&L for point wiring for one light / fan/ bell point controlled by one one way switch with PVC insulated unsheathed single core multistranded copper conductor 1.5 sqmm, 1100 volts grade cable, FRLS, drawn through PVC casing caping including accessories and provinsing of PVC boxes for mounting switches, switch socket, fan regulator, provn of modular terressa plate Irene stripes, No of modules as required on site or as directed by Engineer-in-Charge including one run of PVC insulated unsheathed multistranded copper conductor cable 1.5 sqmm (green colour) earth wire and connected to earth dolly. Make of wire :-Havells/ Finolex/L&T. Make of casing caping- Poly plast/ pressfit/ Presto plast.

All as per item above but for one socket outlet 5 pins 5 amps controlled by one switch on same board .

All as per item above but for one socket outlet 5 pins 5 amps controlled by one switch on independent board.

All as per item above herein before but wiring with 2.5 sqmm copper wire ( FRLS) and 1.5 sqmm earth wire for socket outlet 6 pin 15 amps on independent board.

S&F switch piano flush button single pole, one way 5 amps complete all as specified and directed. Make - Anchor/SSK/Cona Havells .

S&F switch socket combination 2 in 1, 5A flush type.Make - Anchor/SSK/Cona Havells.

S&F switch socket combination 3 pin 16A, flush type. Make - Anchor/SSK/Cona Havells.

S&F ceiling rose, PVC/poly carbonate, isolated body three terminal complete all as specified and directed. Make - Anchor/SSK/Cona Havells.

S&F lamp holder angle type PVC/Poly carbonate type insulated body with back plate suitable for batten/wall fitting complete all as specified and directed. Make - Anchor/SSK/Cona Havells.

Supply and Fix LED Bulb 9 watt all as specified and as directed by Engr-in-Charge.

S&F sheet metal enclosure for DBs (single door type) when MCBs to be used single pole and neutral 4 way incl blanking plate as reqd with 200 amps rated busbar 240V fixed sunk/flush to the wall or niche complete all as specified and directed. Make : Legrand, Havells/HPL.

S&F sheet metal enclosure for DBs (single door type) when MCBs to be used single pole and neutral 8 way incl blanking plate as reqd with 200 amps rated busbar 240V fixed sunk/flush to the wall or niche complete all as specified and directed. Make : Legrand, Havells/HPL.

MCB single pole & neutral 40 Amps 230 Volts'C' series, 10 KA complete all as specified and directed.Make: Havels /Legrand L&T.

S&F MCB's single pole 240 volts 6 to 32Amps 10 KA 'C' series, all as specified and as directed by Engr -in-Charge. Make : Leggrand/Havells/HPL.

Supplying and fixing 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, cable flat or circular of size 16sqmm, four core including taking down old services cable and removing from the site complete all as specified and as directed. Make : Havells, Plaza, Gloster, Polycab.

House service bracket (hook type), complete, with 3m long GI pipe 40mm dia medium grade, two Nos 90 degree bend, MS hook and guy or stay, complete all as specified. Make: Havels/Anchor/Polycab/SSK.

S&F in replacement LED light fitting 1x9W/1X10Wbulk head luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.Make:-Havells/Syska/Wipro

Supply and fixing in replacement LED lights fitting 1x 20W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.Make:-Havells/Syska/Wipro

Exhaust fan plastic 300mm sweep 1400RPM, 240 volt with louvers, single phase including PVC flexible wire connecting to ceiling rose including making hole, groting nuts & bolts and plastering & making good the disturbed surface complete all as specified. Make : Havells model No. Turbo force SP or equivalent Make in Bajaj/CG/Crompton, complete all as specified and directed.

Earthing complete with galvanized steel earth plate electrode 60cmx 60cmx6mm thick buried directly in ground (earth pit not less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.5m below normal ground level, connected to galvanized iron wire 4.0mm dia by means of bolts, nuts and washers of galvanized iron or steel, protected by GI light grade pipe 15mm bore including GI light grade water pipe 20mm dia with funnel all as shown in electric plate No. 03 of 2009 SSR Pt-I and testing on complete including earth work in any type of soil, PCC 1:2:4 type B-0 as in earth pit and cover 40mm thick reinforced with XPM (weight not less than 4.0Kg/Sqm) and frame of angle iron 25x25x3mm with lugs 2 Nos and with 6mm dia MS bar handle made to shape, common salt, charcoal and testing on completion, all as specified and directed.

M/S BEE AAY CONSTRUCTIONS

MOHAMMAD HAMZA SOFI AND SONS

patriotic builders

Bidder Name

patriotic builders

RATHER BROTHERS

MOHAMMAD HAMZA SOFI AND SONS

M/S BEE AAY CONSTRUCTIONS