Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹19.6 LAccepted-AOC 26 3 3RD CROSS GANESHA BLOCK SULTANPALYA RT NAGAR POST BANGALORE 560 032 | BANGALORE | BANGALORE | KARNATAKA | 560032 | L1 | Accepted-AOC Lowest bid value | |
| 2 | L2₹22.2 L+₹2.5 L (12.5%)Rejected-AOC NO 9A VINAYAKANILAYA KANAKA GANAPATHI STREET OM SHAKTHI LAYOUT KANAKAGIRI HORAMAVU POST BANGALORE 560 043 | BENGALURU URBAN | KARNATAKA | 560043 | L2 | Rejected-AOC Higher bid value | |
| 3 | L3₹22.3 L+₹2.6 L (13.1%)Rejected-AOC NO 45 5TH CROSS MALLAPPA LAYOUT BABUSAPALYA KALYAN NAGAR BANGALORE 560043 | BENGALURU URBAN | KARNATAKA | 560043 | L3 | Rejected-AOC Higher bid value | |
| 4 | L4₹25.8 L+₹6.1 L (31.1%)Rejected-AOC 20 1ST A CROSS SAI NAGAR AREHLLI UTTARHALLI BANGALORE 560 061 | BENGALURU URBAN | KARNATAKA | 560061 | L4 | Rejected-AOC Higher bid value |
Tender Value
Refer Docs
EMD Value
₹48,000
Closing Date
23 Nov 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) BANGALORE
GE (AF) BANGALORE, HQ TC AIR FORCE , BANGALORE 560006
ADDITION/ALTERATION TO LABOUR ROOM AT BLDG NO 113 AT CHAF BANGALORE
2023_MES_624210_1
8161/GE/65
Open Tender
Civil Works
Item Rate
180 days
GE (AF) BANGLAORE
AS PER NIT
5 documents required · 5 mandatory
₹500
GE (AF) BANGALORE
₹48,000
22 Jan 2024
19 Oct 2023
29 Nov 2023
19 Oct 2023
23 Nov 2023
8 Nov 2023
20 Oct 2023 - 27 Oct 2023
Amount
Taking down cement plaster on brick or stone walls etc incl racking out joints hacking for key ,scrubbing down with water etc complete all as specified and directed
Demolition of brick or stone/boulders masonary, built in cement mortar or cement lime mortar including quions, archar, piller etc but excluding archer facings dressed stone work and precast concrete articles etc complete all as specified and directed.
Demolition of cement concrete in ground floor and paving n.exe 15 cm thick (below or above GL) complete all as specified and directed.
Dismantling floor hearth or wall tiling including cement mortar bedding (but not balking) serviceable tiles to store and rubbish off the premises etc complete all as specified and directed
Demolition of reinforced cement concrete (reinforcement cut as reqd to facilitate demolition) of any description and in any position not otherwise specifically not provided for etc complete all as specified and directed
Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc. laid, bedded and pointed in cement mortar all as specified and as directed.
Taking down chowkhat or frames with shutters exc 1.5 sqm but n exc 4 sqm each (w/o taking of shutters from the frame) etc complete all as specified and directed.
Taking down chowkhats or frame with shutters (without taking off shutters from the frame) n/exe 1.50 Sqm each etc complete all as specified and directed.
Taking down shutter of any description exe 1.00 sqm but n.exe 2.00 sqm and re fixing in the same opening incl easining etc complete all as specified and directed.
M&L for 25mm thick PCC 1:2:4 typeB1 (20mm graded aggregate) as in sub base/levelling course complete all as specified and directed.
S&F vitrified ceramic coloured tiles 10mm thick (square/rectangular) polished,area of each tiles exc 0.42 sqm but n.exc 1.0 sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm th screed bed in cm 1:6 all as specified and directed
S&F vitrified ceramic coloured tiles 10mm thick (square/rectangular) polished,area of each tiles exc 0.42 sqm but n.exc 1.0 sqm inskirting, dados etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick backing coat in cm 1:4 all as specified and directed
M&L for Non skid ceramic coloured joint free tiles 7to 8mm thick (square/ rectangular), area of each tiles exceeding 0.06 sqm but n exc 0.11 sqm, in floor etc set and jointed in neat cement slurry and pointed in coloured cement to match the colour of tiles,laid over and including cement screed bed 15 mm thick in cement mortar (1:6) laying floor finish complete all as specified and directed.
M&L for glazed ceramic coloured tiles in vertical surfaces 350 x250x7/450x350x7 mm thick , set and jointed in neat cement slurry and pointed in white or colour cement to match laid over 10mm thick cement plaster in cm (1:4) as backing coat etc complete all as specified and directed.
M&L for Pre cast cement concrete block masonry with soild blocks, type C1 (1:3:6) using 20mm graded aggregate exc 10 cm in width and setting in cement mortar (1:6) complete all as specified and directed.
M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces in CM 1:6 finished even and smooth without using extra cement complete all as specified and as directed.
M&L for rendering 10mm thick in CM 1:6 and 5mm thick in cement mortar 1:4 in two layers on fair faces of brick work or concrete surfaces with water proofing compound @ 200 ml per 50kg of cement or as per manufacturer's instruction etc finished even and smooth without using extra cement complete all as specified and as directed.(Note : WPC shall be measured and paid separetely)
Supply only liquid water proofing compound
M&L for rendering 5mm thick on concrete surfaces of ceiling in cement mortar 1:3 finished even and smooth without using extra cement complete all as specified and as directed.
M&L Granite 18 to 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and table top for fixing wash basin and like in cement mortar (1:4) including pointing in white CM (1:2) using marble dust with admixture of pigment to match with shade of granite shade including screed bed or bedding layer 15mm thick in cement mortar 1:4 for laying floor finishes all as specified and as directed by Engr-in-charge.
S&F in repairs 150mm long Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor etc complete all as specified and directed
S&F Pressed steel frames for doors size 105 x 60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate,etc., complete, as specified and directed
M&L for PCC 1:3:6 type C-0 (using 12.5mm graded aggregate) as filled in pressed steel door frames etc complete all as specified and as directed.
S&F mild steel work as in band, strap, hold fast, clamp, cleat, hook, hinges base tie for floor, frame, support or stay for rain water pipe etc and other similar items conforming to Fe-290 Gde-E-165 complete all as specified and as directed.
M&L for PCC 1:3:6 type C-1 (using 20mm graded aggregate) as in hold fast block including necessary form work etc complete all as specified and as directed.
S&F 2nd class hard wood 35 mm thick panelled shutter (any number of panels )with panels of veneered particle board medium density, wood particle board with commercial face veneers supllied and fixed to chowkhats complete all as specified and directed.
S&F steel window/ventilator with side hung shutter including projecting type hinges with steel handles and steel peg stay and with glazing bars complete with dovetailed or welded all as specified and as directed.
S&F steel window/ventilator with top hung shutter including projecting type hinges with steel handles and steel peg stay and but without glazing bars suitable for fixing of gauze with dovetailed or welded all as specified as specified and as directed
S&F for 4mm thick sheet glass ordinary quality and fixed with aluminium beading in square not exc. 0.50 sqm in each pane complete all as specified and as directed.
S&F for 4mm thick Figured glass, pin head type and fixed with aluminium beading in squares n exc 0.5 sq. m in each pane complete all as specified and as directed.
S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples etc complete all as specified and as directed.
S&F Factory made solid PVC door frame of size 50mm x 47mm made out of 5 mm wood grain printed PVC sheet reinforced with MS square tube manufactured as per SSR Part-I specifications and drawings.
S &F Factory made solid PVC Moulded door shutter,28 to 30mm thick(stiles),with 2,4 or 6 raised panel design with 2mm thick Moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face ,with particle board core supplying & fixing in frame at site as per specifications & drawing complete all as specified and directed by Engr-In-Charge.
S & F 100 mm long extruded Aluminium alloy anodised Butt hinges with galvanized mild steel hinge pin type C 22 complete all as specified and directed by Engr-In-Charge.
S & F 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and directed by Engr-In-Charge.
S & F 150 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed by Engr-In-Charge.
S&F for butt hinges 100mm medium weight cold rolled mild steel etc complete all as specified and directed.
S&F mild steel sliding door bolt plate type stove enammelled black of length 300 mm with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts four on bolt plate and two on staple plate and fixed complete all as specified and directed
S&F 200mm long of barrel tower bolts stove enammeled black with bright bolt omplete all as specified and directed.
S&F 150mmmild steel pressed handles oval type stove enamelled black complete all as specified and directed.
S&F Vitreous China wash down water closet pan (Pedestal Pattern), White with 'P' or 'S' trap, including provision of fixing bolts and connecting upto drain and flushing pipe etc. complete all as specified and directed by Engr-In-Charge.
S & F plastic water closet seat, white, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed by Engr-In-Charge.
S & F PVC flushing cistern with flush out valve type,10 ltrs capacity,low level white with inlet ball valve,float and handle including bracket including flush pipe ccomplete all as specified and directed by Engr-In-Charge.
S&F vitreous China wash basin, white flat back, size 550x400mm including brackets, 32mm dia CP waste coupling, waste pipe, short connection complete cutting for and pinning in ends of brackets or ereesing stand complete all as specified and directed by Engr-In-Charge.
S&F15mm pillar tap,cast copper alloy, with capstan head, chromium plated, fancy type screwed down high pressure,with or without lettered "hot" or "cold" with long screwed shank and fly nuts screwed for iron pipe of 15mm bore complete all as specified and directed by Engr-In-Charge.
S&F PVC connection pipe 600mm long 15mm dia both end having brass coupling nut and PVC washer complete all as specified and directed by Engr-In Charge..
S&F in repairs Toilet paper holder of stainless steel fixed by CP brass screw in wall complete all as specified and directed by Engr-In Charge.
S&F Chromium plated brass 15 mm dia health faucet with 8 mm dia, 1.2 m long flexible tube with wall hook complete necessary fixing arrangements etc complete all as specified and directed. Make: Jaquar/Cera/Ess Ess or equivalent as approved.
S&F 110 PVC sanitary connection for WC complete all as specified.
S&Fin repairs 15 mm bore fancy type, chromium plated Stop valves / Angle cock screwed down high pressure with crutch handle screwed both ends for iron pipe or for unions complete all as specified and as directed by Engr-In-Charge.
S&F in repairs brass chromium plated fancy type towel rail, 20mm dia, D type 600mm long between flanges including brass CP brackets complete all as specified and directed by Engr-In Charge.
S&F in repair 20 mm bore gun metal globe or gate valve with iron wheel head screwed head both for iron pipe & fixed etc complete all as specified and directed
S&F CP two way stop cock with all accessories complet all specified and directed. Make :Make :Cera and equivalent makes of JOHNSON/ESS-ESS/ARK etc.
S&F gratings doom , 100mm dia of PTMT(minimum weight 25 gms) complete all as specified and directed
S&F gratings doom , 125mm dia with waste hole of PTMT(minimum weight 40 gms) complete all as specified and directed
Taking up or down 15mm d ia GI Tubing and connections including cleaning for refixing or removal to store complete all as specified.
Taking up or down 20 mm d ia GI Tubing and connections including cleaning for refixing or removal to store complete all as specified.
S&F 15 mm bore GI tubing med grade galvanished with all ftgs and fixed complete to walls & floors etc complete all as specified and directed
S&F 20 mm bore GI tubing med grade galvanished with all ftgs and fixed complete to walls & floors etc complete all as specified and directed
Dimantling pipes of any description fixed to wall or laid under floor etc complete all as specified and directed
S&Fin repairs 75mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed on walls/floor etc complete all as specified and directed
S&Fin repairs 110 mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed on walls/floor etc complete all as specified and directed
S&F in repairs 15 mm bore fancy type CP bib taps cast copper alloy with crutch or butterfly nuts , handle, screwed down for iron pipe etc complete all as specified and directed
S&F (SWR) 75mm dia floor trap,plain with grating incl jointing with solvent cement complete all as specified and directed by Engr-In Charge..
S&F 75mm PVC (SWR) bends any radius complete all as specified and directed
S&F 110mm PVC (SWR) bends any radius complete all as specified and directed
S&F 110mm PVC (SWR) vent cowl complete all as specified and directed
S&F 75mm PVC (SWR) vent cowl complete all as specified and directed
S & F PVC (SWR) 75mm bore junction single, (Single T) equal or unequal etc complete all as specified and directed
S & F PVC (SWR) 110mm bore junction single, (Single T) equal or unequal etc complete all as specified and directed
S&F sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or includingfixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed
M&L for plain cement concrete 1:2:4, type B-1 using 20 mm graded stone aggregate as in surface channel, drain, all as specified and as directed.
Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends etc all as specified and as directed.
M&L for pre-cast cement concrete (reinforced )slab type B-1, 1:2:4 using 20mm graded aggregates as in manholes cover including necessary form work etc complete all as specified and directed.
M & L 10 mm dia and over high deformed TMT bar cut to length, bend to shape required incl cranking bending & hooking ends & binding with MS wire annealed n. less 0.9mm dia etc complete all as specified and directed
Excavation in trenches n. exc. 1.5m wide and n. exc. 1.5m in depth for foundation in hard/ dense soil and getting out etc complete all as specified and directed
Demolition and breaking up drain pipes , 150 mm dia (Salt glazed stone ware, AC or Reinforced concrete) set in cement mortar as in foul conditions etc complete all as specified and directed.
M&L 150mm Concrete bed to drain pipe 150mm dia incl. packing under and haunching against the sides of pipe PCC 1:4:8 type D2 complete all as specified and directed
Returning filling in including spreading, levelling , watering and well ramming n exc. 25 cm in layers (Soil) etc complete all as specified and directed
Removal of excavated surplus (soils) at a distance n exc 50 mtr and depositing where directed at a level n exc 1.5 mtr above the starting point etc complete all as specified and directed
Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) any thickness, including cover fillets etc complete all as specified and directed
M & L for 8 to 9 mm thick Pre painted gypsum building boards of size 595 x 595mm PVC laminated at back side of board insulation & acoustic purpose flat in ceiling fixed or laid / including powder coated GI snap grid of size 605mm x 605mm frame work using 36.50 x 23.50 x 1.5mm main Tee, 23.50 x 23.50 x 1.5mm cross Tee and 25x25x1.5mm angles for false ceiling with screws fixed to false ceiling including hangers 4 mm dia G.I (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and as directed. NOTE: (The rate inclusive of scaffolding and necessary arrangements) all as specified and as directed.
Removing building materials etc. (other than spoil payable under items -earthwork) to a distance of 30.00 Km or above, beyond the lead included in the rates, including loading, unloading and stacking at the destination all as specified and as directed. Note: All debris and rubbish shall be removed from MOD land during or at the end of each working period at his risk and cost in accordance with all applicable federal, state, and local regulations.
Taking down of existing stainless steel door shutter and refixing in same opening duly rectified for smooth functioning of doors complete all as specified and directed
S& F in repairs Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixe etc complete all as specified and directed
S&F in repairs aluminium extruded body door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed etc complete all as specified and directed
M&L for preparation of new plastered surfaces of wall surfaces and applying two coats of oil bound distemper over a coat of alkali resistant primig paint paint through etc complete all as specified and directed
M&L for preparation of new plastered surfaces ceilling surfaces and applying two coats of oil bound distemper over a coat of alkali resistant primig paint etc complete all as specified and directed
M&L for preparation of old plastered surfaces of wall surfaces and applying two coats of oil bound distemper over a coat of alkali resistant paint over 3mm thick wall care putty paint etc complete all as specified and directed
M&L for preparation of old plastered surfaces of ceilling and applying two coat of oil bound distemper all as specified and as directed.
M &L for preparing new plastered or un plastered surface of walls and applying two coats of Cement base paint on walls a coat of chalk primer complete all as specified and directed.
M &L for preparing old plastered or un plastered surface of walls and applying two coats of Cement base paint on walls complete all as specified and directed.
M&L for two coats of synthetic enamel paint on new wooden surfaces over coat of pink to new surfaces including preparation of surfaces, over 10cm width or girth complete all as specified and directed..
M&L for two coats of synthetic enamel paint on new steel surfaces over coat of red-oxide primer including preparation of surfaces, over 10cm width or girth roof painting complete all as specified and directed.
Material and labour for applying one coat of synthetic enamel paint to old painted wooden surfaces of any description, not oterwise described, over 10 cm width or girth including preparaton of surfaces all as specified and direcet by the Engineer-in-Charge.
S&F 18-19mm thick prelaminated particle board interior grade prelaminated on one side with decorative choice lamination and with balancing white on the other side, fixed to aluminium/wooden frame work as in panel, etc., fixed complete all as specified and directed.
Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) any thickness, including cover fillets etc refixing the same in same position all as specified and directed.
S & F coninous (piano) hinges width of flafs 30mm with galvanized brass, bright finish complete all as specified and directed by Engr-In-Charge.
S&F in repair 20 mm dia curtain rods fancy type of aluminium annodised powder coated with fixing brackets (both sides), stops, rollers etc complete all as specifed and directed.
S&F 125mm long Hasp and staple, safety type, aluminium anodised with hinge pin including bolt to hinge plate and fixed with screws
M & L inreplacement sub main wiring with Two single core PVC insulated cable with copper conductor FRLS multistranded 1100 volts grade 2 x 6.00 sqmm in and including heavy grade PVC conduit of suitable size concealed in stone / brick wall in stone wall concealed and its accessories with fixing arrangements including 6.00 sqmm PVC insulated multistranded copper earth continuity conductor and connecting to main earth dolly complete all as specified and directed. Note : One run of earth continuity conductor,one run of PVC conduit and four run of copper conductor together taken as one length for measuring unit length.
All as per serial item No 102 above but for 2 X 6.00 sqmm copper conductor cable 6.00 sqmm for copper earth continuity conductor etc complete all as specified and directed
Supply and fixing of sheet metal enclosure double door type for DBs for mounting of MCB for 415Volts,TPN DB, 8 way with 200 Amps rated Bus bar, fixed complete all as specified and directed.
Supply and fixing of miniature circuit breaker (MCBs) TPN, 415 volts, 10KA, 63 Amps c series complete all as specified and directed.
Supply and fix miniature circuit breaker (MCBs) single pole, 240 volts, 10KA, 6 to 32 Amps C series complete all as specified and directed.
Supply and fix Surge protection device Type 1+2 AC, Triple pole and neutral, TP+N 20k A N complete all as specified and directed. Make:- Havells Model DHSAANBC50320 or equivalent in Indo Asian/ Legrand/L&T
Taking down carefully existing unserviceable point wiring with copper/ aluminium conductor cables (light, fan, socket or power) complete including fittings such as switches, ceiling rose, pendants, regulators, sockets but excluding light fittings complete and removing retrieved materials and making good the disturbed surfaces of wall, floor ceiling etc., complete all as specified and as directed.
M & L Point wiring complete with 1100 volts grade single core, PVC insulated FRLS cable with multi-stranded copper conductor of size 1.5 sq mm nominal area, passing through heavy grade PVC Conduit of suitable size concealed in stone/brick / any type of wall, with all necessary fittings concealed in wall/ roof surfaces, duly earthed with one run of single core PVC insulated FRLS cable with multy stranded copper conductor of size 1.5 sqmm for earthing wire connected to common earth dolly including 1.6 mm thick fabricated CI/MS sheet terminal box concealed mounting in the wall for mounting switches,switch socket combination, fan regulators etc.covered with 3mm thick electroplated bakelite sheet top cover for housing switches, sockets, regulators etc One light point controlled by one single pole 5 Amps switch complete for all as specified and as directed.
Supply and fix Modular switch , 1 Module single pole one way 10 Amps etc complete for all as specified and as directed.
Supply and fixing of modular white cover plate with frame, 4 module etc complete for all as specified and as directed.
Supply and fixing of metal flush box 4 module etc complete for all as specified and as directed.
Cutting into or through the stone walls / brick walls built in cement mortar or cement lime mortar and walls of cement concrete suitable size for housing for sunk box using heavy duty stone drilling/cutter machine and making good the disturbed surface all as specified and directed.
Cutting chasis, pinning in Stone walls/ brick walls etc. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings etc, for concealed conduit wiring a into or through the stone walls built in cement mortar or cement lime mortar and walls of cement concrete suitable for housing 25mm dia conduit pipe using heavy duty stone drilling/cutter machine and making good the disturbed surface all as specified and directed.
Supply and fix inreplacement medical grade copper pipe 15mm dia including fittings for Oxygen,Air and Vaccum complete all as specified and directed.
Supply and fix inreplacement medical grade copper pipe 12mm dia including fittings for 16 Nos drop points (Oxygen-02 Nos,Air-01 nos and Suction-01 Nos complete all as specified and directed.
Supply and fix inreplacement medical grade isolation ball valve 15mm with end fittings for Air and suction complete all as specified and directed.
Supply and fix inreplacement medical grade butterfly ball valve 12mm with end fittings for oxygen drop points complete all as specified and directed.
Supply and fix inreplacement bed head panels (4-5 ft long) with Gem 10 type Gas outlet -04 Nos( Oxygen-02 Nos, Air -01 No & Suction-01 No) electric Switch Socket point 5 Amps -04, 15 Amps - 2 nos Nos including extendable inspection lamp 10w LED with control switch extendable up to 02 mtrs, Provision for Nursing call point for etc complete all as specified and directed.
Supply and fix inreplacement caliberated BPC Oxygen flow meter with humidifier bottle and Gem 10 type pipeline adapter CE certified complete all as specified and directed.
Supply and fix inreplacement wall mounted suction unit with 600ml collection jar and Gem 10 type probe& PVC tube CE certified complete all as specified and directed.
PRACHANIVA CONSTRUCTIONS
M/S Suresh Raju
K. VENKATESH NAIDU
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .