REPAIR TO DRAIN PATH FENCING AND MISC REPAIR WORK AT 11 GRRC UNDER GE (WEST) LUCKNOW

Amount

Demolition of cement concrete (unreinforced) in ground floors and pavings n. exc 15cm thick (below or above ground level) complete all as specified and as directed.

Demolition of brick or stone boulder masonry, built in cement mortar including all quoins, arches, Pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (including backing coat) and rubbish off the premises complete all as specified and as directed.

Taking down chowkhat with shutter (without taking off shutter from the frame) area exc 1.5 sqm but n.exc 4 sqm each complete all as specified and as directed.

Taking down chowkhat with shutter (without taking off shutter from the frame) area n. exc 1.5 sqm each complete all as specified and as directed.

Taking up or down steel tubing & connection 15mm bore complete all as specified and as directed.

Taking up or down steel tubing & connection 20mm bore complete all as specified and as directed.

M & L for GI tubing medium grade 15mm dia galvanised with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.

M & L for GI tubing medium grade 20mm dia galvanised with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.

M & L Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built inCM 1:6 complete all as specified and as directed.

Taking down cement or cement lime plaster on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

M & L for rendering 15mm thick in CM 1:6 on other than fair faces of brick work or concrete surface finishing the surface even and smooth without using extra cement complete all as specified and as directed.

M & L for rendering 15 mm thick in CM 1:4 on fair faces of brick work or concrete surface finishing the surface even and fair complete all as specified and as directed. (Note:- Water proofing compound shall be measured and paid separately.)

M & L for rendering 10 mm thick in CM 1:3 on concrete surface and finishing the surface even and smooth without using extra cement as on ceiling complete all as specified and as directed.

M & L for preparation of new plastered surface of ceiling and applying three coats of white wash complete all as specified and as directed.

M & L for preparation of old treated surfaces of ceiling and applying two coats of white wash complete all as specified and as directed.

M & L for preparation of new plastered surface of wall and applying three coats of whitewash complete all as specified and as directed.

M & L for preparation of old steel surface of any description exceeding 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Supply only integral water proofing compound conforming to IS 2645 complete all as specified and as directed.

M & L for coloured Non -Skid Ceramic tiles 7 to 8 mm thick area of each tiles exceeding 0.11sqm but not exceeding 0.18 sqm in floor etc set and jointed in neat cement slurry & pointed in coloured cement to match the surface over and including 15 mm thick screed bed in cement mortar (1:4) complete all as specified and as directed.

M & L for coloured glazed ceramic tiles 300 x 450 x 6-7 mm thick but as on vertical surfaces such as skirting/dado over and including 10mm thick backing coat in CM 1:3 complete all as specified and as directed.

Dismantling stone slab and tiles of any description and thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and as directed.

M & L for 18-20mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

M & L for 18- 20 mm thick granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.

S & F in repair vitreous china squatting pan Orissa pattern long pan size 580 x 440mm with CI trap long neck 100mm with integral foot rest & fixing including making good floor to match complete all as specified and as directed.

S & F steel chromium plated urinal spreader suitable for half stall urinal complete all as specified and as directed.

S & F in repair CP stop/angle valves 15mm bore fancy type chromium plated screwed down high pressure with quarter turn handle and wall flange complete all as specified and as directed.

S & F in repair CP two-way stop/angle valves 15mm bore brass chromium plated, screwed down high pressure with castain head handle screwed both ends for iron pipes or for union complete all as specified and as directed.

S & F in repair CP bib taps 15mm fancy type Chromium Plated with quarter turn handle and wall flange complete all as specified and as directed.

S & F in repair 10 litres capacity PVC valve less symphonic action type flushing cistern, low level, white with inlet ball valve, float and handle including brackets complete all as specified and as directed.

S & F in repair PVC connection pipe 15mm bore 450mm long with PTMT nuts complete all as specified and as directed.

S & F in repair vitreous china Water closet pedestal pattern with sheet cover white and flushing pipe 32mm dia for low level flushing cistern (excluding fixing bolts, flushing cistern and flush pipe) including Pedestal pan and trap, including connection to drain (or outgoing pipe) and to flushing pipe, anti -syphonage pipe etc complete all as specified and as directed.

S & F in repair for CP Pillar taps fancy type15mm brass with capsten head chromium plated, screwed down high pressure with or without lettred "hot or cold" water long screwed both ends for iron pipe complete all as specified and as directed.

S & F in repair Vitreous china urinal half stall type of size 355 x 345 x 535mm complete including provision and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal in back of cement including connecting to flushing pipe and outgoing pipe complete all as specified and as directed.

S & F in repair 15mm bore concealed stop valves brass chromium plated long shank, with capstan head and cup screwed both ends for iron pipe or for union complete all as specified and as directed.

S & F Gun-metal, globe or gate valves 20mm bore with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.

S & F in repair CP brass (tubular towel rail) 20 mm dia D type aluminium anodised, 60 cm long between flange complete all as specified and as directed.

S & F in repair glass corner self fancy type 250 x 250 and 5.5 mm thick fixed it with brass bracket and screwed complete all as specified and as directed.

S&F factory made PVC door frame of section 100 x 45 mm using 5 mm thick prelaminated heat moulded extruded PVC sheet of density 600 kg/Cum and core of section/frame dame solid using MS hollow rectangular tube of size 400mm x 20mm of guage 19 and PVC sheet of density 600 kg/cum. Grame fixed in position using 06 nos 8 mm dia and 100 mm long dash through bolts (anchor fastener) complete all as specified and as directed.

S & F 30mm thick factory made PVC panelled door shutter consisting of Stiles/Rails made out of heat moulded 5mm thick prelaminated PVC sheet of density 600 kg/cum and MS rectangular hollow tube of 40 x 20mm of guage 19 with size of member as given below. Edges/corners of stile/rail chamfered towards panel and panel consisting of 02 Nos panel of 10mm thick (5mm + 5mm) prelaminated PVC sheet of density 600kg/cum complete all as specified and as directed. Sizes of members:- (a) Stiles - 110mm x 30mm (b) Bottom /Top Rail - 135mm x 30mm (c) Lock Rail - 145mm x 30mm

M & L for PCC type B-1 (1:2:4) (20mm graded stone aggregate) as in benching and coping complete all as specified and as directed.

S & F framed work such as grills, gratings etc with ends of bars shouldered and / or riveted or forget into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walkways, railings, framed work of water tanks and similar work conforming to Fe 290 Gde E-165 complete all as specified and as directed.

S & F 300 mm long aluminium alloy, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts complete all as specified and as directed.

S & F 125mm size aluminium alloy handles, fabricated type extruded section, ISI marked complete all as specified and as directed.

M & L for 3mm thick figured glass pin head type and glazing with oil putty in squares n.exc 0.5 sqm in each pane complete all as specified and as directed.

Hacking out old broken glass from metal frame incl punching or drilling out old glazing pins/spring clips and providing complete all as specified and as directed.

S & F for aluminium anodized barrel tower bolts 200 mm of extruded section and fixed complete all as specified and as directed.

S & F Stainless Steel butt hinges 100mm size and fixed complete all as specified and as directed.

M & L for 75 mm thick PCC 1:3:6, type C-1 using 20mm graded stone aggregate as in plinth protection, top finished even and smooth without using extra cement including making dummy joints 10x30mm size and filling the same with mix of 1 part of bitumen and 3 parts of sand at distance not exc 2.5 m and at every turning point complete all as specified and as directed.

S & F in repair looking mirror fancy type decorative pattern 5 to 6mm thick fixed on wall with stainless steel studs complete all as specified and as directed.

M & L for prepration of old treated surface of wall and applying two coat of white wash complete all as specified and directed.

S & F in repairs WHB vitreous china, white, flat back, size 550x400mm incl brackets, waste coupling and waste pipe complete all as specified and as directed.

M & L for 75 mm thick Cement concrete 1:4:8, type D-2 using 40mm graded stone aggregate as in sub base etc complete all as specified and as directed.

M&L 60mm thick rubber moulded glossy finish coloured interlocking precast PCC pavers any colour of M-35 grade laid over 25mm thick sand cushioning and joint filled with fine sand incl levelling, tamping and sweeping etc complete all as specified and as directed.

M & L for 10 -12mm thick Exterior grade cement concrete tiles as in floor/pavings set and jointed in neat grey cement slurry and pointed with mixture of white cement and pigment area of each tile exc 0.11 Sqm and n. exc 0.18sqm over and including 15 mm thick screed bed in CM 1:4 complete all as specified and as directed.

M&L for chequered cement concrete tiles coloured glossy finish rubber moulding with mixture of white cement and pigments of size 30cmx30cmx25mm thick set, jointed and pointed in neat cement slurry in fooors incl 15 mm thick screed bed in CM 1:4 complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

Excavating in post holes (or smilar holes) each n. exc 0.5 Cum getting out returning filling in and ramming earth or broken rubble mixed with earth around in layer n. exc 25 cm complete all as specified & directed.

M&L cement concrete 1:3:6 type C-2 using 40 mm graded stone agg in foundation, filling and mass concrete complete all as specified and as directed.

S&F rolled mild steel in joist, channel, angle or tees sections, circular tubes fixed independently as in post, pillars stanchions etc (FE-290 Gde E-165) complete including cutting grinding welding etc as required complete all as specified and as directed.

S &F M S Plate (plain or chequered) channels square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and as directed.

S & F 10mm thick transparent polycarbonate sheet as in roof covering/clading to wall, fixed with self tapping screws incl aluminium strip and all necessary fitting complete all as specified and as directed.

S & F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

S & F mild steel flat iron fillets for securing polycarbonate steel including necessary cutting welding revetting complete all as specified and as directed.

S & F mild steel rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates complete all as specified and directed.

M & L for preparation of new steel surface of any description over 10cm width and girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

M & L for demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including necessary excavation making drainage opening wherever required complete.

Preparation of old external treated surface of concrete/kerb stone surfaces, facias, cornices etc by complete removing all scale, loose material dust etc and applying two coats of weather proof anti fungal (Apex) paint over one coat of wall care putty and applied as per manufacturers instruction complete specified and directed.

M & L for preparation of new plastered surface of wall and applying minimum 1mm thick of wall care putty over prepared surface and applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS-15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 Sqm complete all as specified and as directed. Note: Primer and emulsion shall be carried out through air less spray machine ( Machanical means) complete all as specified and as directed).

M & L for complete removal of existing treatment on wall /roof projectios including facia, cornices etc by scrapping with mechanical sander (Having mechanical vaccum mechanism) with sanding pad of appropriate grit to make surface clean free from dust, loose paint etc by skilled labour and applying minimum 1mm thick of wall care putty over prepared surface and applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS-15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 Sqm at any height complete all as specified and as directed. Note: Primer and emulsion shall be carried out through air less spray machine ( Machanical means) and maximum height upto 25 mtr and rate included necessary scafolding complete all as specified and as directed.

M & L for filling soil including raising (or lowering) earth, spreading in layers n exc. 30 cm thick; watering, ramming/rolling and finishing to required size, shape, etc., n exc. 1.5 m high from base.

M&L hard core of broken bricks of gauge n.exc 63 mm deposited, spread and levelled in layers n.exc 15 cm thick, watered and rammed to true surface complete all as specified.

M&L for 100mm thick PCC 1:3:6 type C1 (20MM graded stone aggregate complete all as specified and as directed.

Gaurav Enterprises

M/S PAVA ENGINEERS

M/s Chandra Mohan and Sons

M/S KAUSHIK CONSTRUCTION

M/s Sachkhand Traders