SPECIAL REPAIR REPLACEMENT TO ROOF (WATER PROOFING), DOORS, WINDOWS, TOILETS AND CONNECTING PATH OF 155 MM GUNS AND HOWITZERS CELL BLDG NO 149A AT CQA (W) JABALPUR

Amount

M&L for anodised aluminium frame for doors, windows, ventilators with oneor more rebates including joining cleat for fixing etc complete all as specified and directed.

S&F Anodised aluminium door shutters, aluminium section weighing 0.55kg/m including necessary jointing cleats, glazing clips, ruber neoprene packing handles 2 No in each door, hinges anodised, aluminium snap beading screws etc, complete all as specified and directed.

Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised alumnium snap beading, screws etc. complete all as specified.

S&F Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section wieghing 0.55kg/mtr including necessary joing cleats , glazing clips, rubber packing, anodised aluminium snap beading, screws etc complete all as specified and directed.

Supply and fix sheet glass 4.80mm thick glass , ordinary quality and glazing with EPDM rubber in square n.exc 0.5 Sqm in each pane complete all as specified and directed.

Supply and fix sheet glass 4mm thick glass, ordinary quality fand fixed with PVC/neopreme gasket. angular glazing alumnium beads, rubber packing , locking arrangement in square exc 0.5 sqm in each pane for sliding rack with sliding handle coplete all as specified and directed.

S&F Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000mm in width and of wight between 61 to 80 kg and fixed Aluminium (extruded section) body all as specified and directed.

Taking down/removing the existing roof treatment including bocking coat if any and disposal of debris to a distance not exceeding 100m as directed by Engr-in-Charge rending in cm 1:4, 10mm thick over roof surface finishing fair and even without using extra cement including mixing with WPC as per manufacture instructions and primering the plastered surface using bitumen primer @0.3Kg/Sqm and applying water proofing treatment using 3mm thick Acetic poly propylene (APP) Membrane modified pre fabricated with non woven polyester reinforced established weight not less than 3.6 kg/sqm laid over a coat of bitumen 85/25 @ 1.2 kg/sqm as per manufactures instructions complete all as specified and directed by Engineer in Charge.

Supplying only Integral waterproofing compound.

S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted & fixed in position all as specified, 1000 Ltrs including taking down the existing water tank of any capacity complete all as specified and directed.

S&F Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 20mm-210 gms/25mm-455gms/ 40mm - 690 gms) including taking down the existing ball valves all as specified and directed

Taking up or down steel tubing and connections of following dia, including cleaning for re-fixing or removal to store upto 15mm bore complete all as specified and directed.

All as per item No. 12 here in before but 20mm bore.

S&F tubes, 'medium grade' of following dia, galvanised with all fitting, laid in trenches upto 15mm bore complete all as specified and directed.

All as per item No. 14 here in before but 20mm bore.

Refixing old steel tubing of 20mm dia and connections in new or old position (Walls, ceiling, floors, etc.) complete all as specified and directed.

S&F Gun-metal, globe or gate valves 20 mm bore with iron wheel head, screwed both end for iron pipe of dia

Cutting grooves rebates on bricks or concrete parapet wall exc 15cms and nn. exc 30cms girth and trimming the surfaces complete all as specified and directed.

Dismantling of existing asbestos cement (corrugated, semi corrugated etc) sheets including ridges in roof covering and material and labour for pre painted plain GALVALUME ALLUMINIUM ZINC coating GI based corrugated steel sheet 0.5mm thick of any colour having tensile strength of 550Mpa as in roof covering/clading to wall fixed with tapping screws complete all as specifed and directed.

Dismantling of existing plain or corrugated fibre sheeting any gauge, any thickness roof covering valley gulter and M&L for pre painted plain GALVALUME ALLUMINIUM ZINC coating GI based plain steel sheet 0.5mm thick of any colour having tensile strength of 550Mpa as in roof covering/clading to wall fixed with tapping screws complete all as specified and directed. existing plain or corrugated fibre sheeting, any gauge, thickness, roof covering valley gutter complete all as specified and directed.

S&F wind ties for roof including securing bolts, flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting etc & similar work conforming to Fe 290 Gde E 165 including dismantiling the existing wind ties of any description all as specified and directed.

Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water etc.

M&L Rendering 15mm thick on brick masonry surfaces or surface other than fair face of brickwork in CM (1:4) all as specified & directed.

M&L Rendering 15mm thick on brick masonry surfaces on fair face of brickwork in CM (1:6) all as specified & directed.

M&L for prepartion of new plaster surfaces of wall and applying two coat of plastic emulsion paint over a coat of 3mm thick wall care putty complete all as specified and directed.

Complete removal of existing treatment on wall and applyinh 3mm thick wall care putty and treated the surface with two coat of plastic emulsion over a coat of primer complete all as specified and directed.

M&L for prepartion of new plaster surfaces of wall and applying two coat of weather proof acylic emulsion paint over a coat of 3mm thick wall care putty complete all as specified and as directed.

Complete removal of existing treatment on wall and applying two coats of weather proof exterior emulsion over a coat of primer and applying 3mm thick birla white wall care putty complete all as specified and directed.

M&L prepartion of new steel surface of any description, n,exc 10cm in width or girth priming with red oxide and applying two coats of synthetic enamel paint all as specified and directed.

Taking down/dismantling false ceiling of any discriptions M & L for suspended false ceiling system using chicago metallic (E grid) exposed suspended system of grid section size 600mm x 600mm comprising of GI powder coated main 39mm x 24mm x 0.80mm thick (thickness comprising of GI / 0.40 + PPPCGS / 0.30) cross Tee 29mm x 24mm x 0.80mm thick and wall angle 22.2mm x 22.2mm x 0.65mm thick with and including 6mm thick HPSC (High pressure steam cured) pre-primed self imposed fixtured designer board to be placed in the grid system duly suspended with 4mm dia GI bar hangers fixed with steel dash fasteners from purlins of the roof with clips complete all as specified and as directed.

M&L PCC type B1 (1:2:4) using 20 mm graded aggregate as in copping, filling gaps between roof sheeting and wall etc all as specified and as directed.

Demolition of cement concrete in ground floors and pavings n.exc 15cm thickness (below or above ground level) all as specified and as directed.

M&L for PCC 1:3:6 type C2 using 40mm graded stone aggregate, 75mm thick in plinth protection laid in panels and finished even and smooth without using extra cement including necessary form work complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.

M&L chequered cement concrete tiles 30cmx30cmx25mm thick prepolished set jointed and pointed in neat cement slurry in floors with grey cement and pigment inclusing screed bed or bedding layer in cement mortar 1:6, 15mm thick complete all as specified and directed.

M&L Coloured Glazed ceramic tiles in vertical surfaces 300 x 200x 7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick cement plaster in CM 1:4 complete all as specified and directed.

M&L non skid jointless Ceramic colour tiles 7mm to 8mm thick (square/rectangular) area of each tiles exc 0.11sqm but nexc 0.18sqm in floor etc set and jointed in neet cement slurry and pointed in white or coloured cement to match including screed bed in CM 1:6, 15mm thick all as specified and directed.

Demolition of brick/stone masonry, built in cement mortar including all quoins, arches, pillars etc but exluding ashlars facings, dressed stone work and pre-cast concrete articles all as directed.

M & L for Brick work with subclass 'B' brick straight or curved on plan exc 6m mean radious built in CM (1:6) as directed.

Taking down chowkhats or frame but with shutters (without taking off shutters from the frames) not exc 1.5 Sqm each including builders hardware if any complete all as specified and directed.

Taking down chowkhats or frame but with shutters (without taking off shutters from the frames) exc 1.5 Sqm but not exc 4 Sqm each including builders hardware if any complete all as specified and directed.

M&L collapsible steel gates , top hung, cosisting of channel pickets, pivoted flat bars, top and bottom runners, handles etc as specified and errected in position and securing runners with holdfasts and brackets complete all as directed.

M&L providing cement concrete 1:3:6 type c, using 20mm graded stone agg as in hold fast complete all as specified & directed.

S&F 150mm aluminium anodised of extruded section barrel tower bolts.

S&F 150mm long alumiunium handles cast type anodised.

S&F aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolt of extruded section or cast aluminium alloy and fixed 300mm long complete all as specified and directed.

S&F in repair stainless steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F stainless steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with stainless steel wire staples complete all as specified and directed.

M&L for prepraration of new or previously untreated surfaces of steel and applying two coats of synthitic enamel paint over a coat of redoxide.

All as per Item No. 49 here-in-before but one coat on old Steel surfaces

M&L for Plain cement concrete (1:3:6) type C-2, using 40mm graded stone aggregates in surface channel, bed of drains incl form work / moulds complete all as directed.

S&F in repairs Towel rail brass chromium plated 20mm dia 600 mm long complete all as specified and as directed.

S&F 15 mm dia angle valve chromium plated cast coper alloy fancy type screwed down high pressure with capstan head screwed both ends for iron pipe or for union complete all as specified and as directed.

S&F 15 mm bore stop valves, But fancy type chromium plated with long shank and cup (concealed type).

S&F as in repair bib taps 15mm dia cast copper alloy with chromium plated fancy type.

S&F pillar tap cast copper alloy of 15mm size with capstan head chromium plated fancy type screwed down high pressure complete all as specified and as directed.

S&F PVC vaveless, syphonic action type 10 ltr flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and as directed.

S&F PVC connection 15mm size with nuts of length 600mm complete all as specified and as directed.

S&F in repairs 100 mm dia Grating complete all as specified and as directed.

S&F waste coupling of PTMT(Half or full threaded) 32 mm bore complete all as specified and as directed.

S&F PVC Waste pipe 32mm/40mm dia low density polyethylene (LDPE) pipes of pressure rating 6 Kgs/sqcm complete all as specified and as directed.

Taking down PVC/CI pipe any radious and in any position as directed.

S&F 110mm PVC (SWR) pipe single socketed in any length with rubber ring joints, fixed to walls as directed.

S&F 75mm PVC (SWR) pipe single socketed in any length with rubber ring joints, fixed to walls as directed.

S&F 110mm PVC (SWR) junction (single T) equal & unequal complete all as specified and as directed.

M&L for PVC(SWR) bends of dia 110mm complete all as specified and as directed.

S&F 100mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed.

M&L Vitreous china urinal half stall type, white with grating and union for discharge pipe incl providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and incl 60mm long brass screws, pointing around urinal back in cement : fixing automatic flushing sistern with brackets , flush pipe, waste pipe, grating and union for discharge pipe complete all as specified and as directed.

S&F solid PVC Door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube in openings complete all as specified and directed.

S&F Urinal spreader of PTMT any colour for fixing with 15mm dia pipe. (Minimum weight 60gms).

Factory made solid panel PVC Door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing.

S&F mild steel butt hinges medium wieght cold rolled mild steel 100mm long complete all as specified and as directed.

S&F Aluminium alloy, decogrill over windows all as directed.

Vitreous china squatting ‘Pan’ Orissa pattern 580 x 440mm, white, with integral foot rest (excluding flushing cistern and flush pipe) including connection to trap, and to flush pipe, anti syphonage pipe etc including trap set in and including concrete and making good to floor complete all as specified.

Supply and fix Vitreous China wash basin white flat back size 450x300 mm including bracket, cutting for and pinning the ends of brackets or erecting stands also including brass chromium plated waste coupling 32mm dia,PVC flexible wastepipe of adequate length and dia and PVC connection 15mm size 450 mm length with brass CP nuts on both sides complete all as specified and as directed.

Demolition of precast concrete articles built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and as directed.

Providing precast cement concrete louvers and jallies, type B0 1:2:4 (12.5mm graded agg) 35mm thick (measured solid) set in CM 1:6 including all mouldings but execluding frame complete all as specified and directed.

INTERNAL ELECTRIFICATION :- Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets etc and making good disturbed surface by using cement mortar, white cement, putty etc and match with existing surfaces of walls, floors etc complete all as specified as directed. Note:- (i) Concealed, conduit and accessories will not be dismantled. (ii) Taking down of lamp fittings measured separately.

Supply, fixing, concealing rigid non matalic PVC conduit of size not less than 19mm, (ISI marked) complete with all accessories including cutting, chases in existing wall and concealing the conduit and make good the disturbed surfaces all as directed.

Material and Labour for Point wiring with 1100-volt grade FRLS PVC insulated-unsheathed 1.5 Sq mm stranded copper conductor cable (ISI marked), with continuous earth wire of 1.5 Sq mm stranded copper conductor cable (ISI marked) PVC insulated-unsheathed, drawn in & including PVC conduit including sunken pressed steel terminal boxes for housing/ fixing switches suitable for modular switches and modular cover plate complete for mounting switch/sockets, regulators etc for the following :- NOTE:- (i) Conduit and accessories if required to be replaced will be measured and paid separately under revalent items of this schedule. (a) One light/fan/Exhaust fan/Call bell point controlled by one switch

All as per item No. 81 here-in-before but one switch socket outlet point 05 Amps on independent board

All as per item No. 81 here-in-before but one socket out let on same baord

All as per Item No. 81 here-in-before but with 2.5 Sq mm copper cable for 5/15 Amps switch socket outlet comlplete all as directed.

Excavation in trenches in hard/dense soil not exceeding 1.5m wide and not exceeding 1.5 metre in depth for laying of cable and not exceeding 10 Sqm on plan for poles, struts, stays etc. and not exceeding 1.5 m in depth and getting out complete all as specified.

Returning, filling in, trenches including spreading leveling, watering and well ramming in layers not exc 25 cm.

Removing excavated material to a distance not exc 50 mtrs and depositing where directed at a level n.exc 1.5 mtr above the starting point.

M&L for cushioning for protection of cable with dry river sand free from particles all as specified and directed.

M&L for Protection to cable with one layer of new bricks laid flat butting to each other in such a way that the length of the bricks is at right angle to the central axis of the cable using old size sub-class ‘B’ bricks all as directed.

Cutting the existing hard standing/road and making good after laying of cable/pipe with 100mm thick PCC 1:2:4 mix, type B-I including finishing to match existing surfaces complete all as directed.

S&F light grade galvanized iron pipe 50 mm bore confirming to IS 1239 and ISI marked with all fittings fixed on walls/poles/insertion into bore under road etc for protection of cable complete , including suitable clamps nuts & bolts all as specified.

Supply and fixing bell push, Modular type 6 Amps complete all as directed.

Supply and fixing Bell ding dong AC. 230 V SP complete all as directed.

Supply and laying in trenches/through pipes or bare in road crossings/paths/drains/ ducts/floors/along poles/walls/ ceilings/ equipments etc. Cable Under ground, Heavy duty, armoured, XLPE insulated with stranded aluminium conductor, 70 sqmm x 3.5 core, 1100 Volts grade all as specified and directed.

Taking down sub main using any type & making good the distirbed surfaces of walls by using cement mortar white cement puttying etc all as directed and material and labour for sub main wiring with two single core 4 sqmm multi stranded copper conductor, FRLS PVC insulated, unsheathed cable in and including rigid non metallic PVC concealed conduit medium grade, ISI marked, 25 mm dia including 4 sqmm FRLS PVC insulated and unsheathed stranded copper conductor as earth wire complete all as specified and directed. Note:- Two runs of 4 sqmm copper conductor cable, one run of 4 sqmm copper conductor and one run of PVC conduit will be measured as one unit.

Supply and fixing Modular switch 6 Amps, 230 volts flush button single pole one way complete.

Supply and fixing Modular Socket, outlet 5 pin, 6 Amps complete all as directed.

Supply and fixing Modular Socket, 16 Amps - 6 pin complete all as directed.

Supply and fixing Modular Switch, 16 A amps one way complete all as directed.

Supply and fix ceiling rose, 3 terminals of 28x50mm, PVC/ poly carbonate, isolated body.

Taking down unserviceable main switch/DBs of any type complete S&F sheet metal enclosure for DBs when MCCB to be used, 4 way TPN, double door type 415 volts with 200 amps rated busbar suitable for MCCB, 63 amps, 4 pole incomer complete all as specified and directed. Note :- MCCB & MCBs will be measured separately.

Supply & Fixing MCCB, 4 Pole, 63 Amps, 415 Volt, 25 KA including connecting up using suitable size of lugs complete all as directed.

Taking down unserviceable main switch, DB of any type complete supply and fixing MCB DB SPN 8 way with 200 Amps rated bus bar 240 V double door when MCBs to used complete all as specified and directed.

Supply and fix sheet metal enclosure,made of CRCA sheet 2mm thick, on angle iron base frame duly powder coated, of size 1mtr x 1mtr x 0.6mtr debth with front size hinged double door with locking arrangement, fixing on wall using suitable nuts, bolts and washers suitable for accomodating MCCB, TPN DB and Change over switch all as directed, NOTE :- MCCB DB/Change over switch will be measured and paid separately under relevant items of the schedule.

S&F MCB Single Pole Neutral of capacity 32 Amps 10KA breaking capacity C series.

Supply and fixing MCB SP 'C' series 6 Amps to 32 Amps as ordered suitable for 240/ 440 volts, 50 HZ 10 KA breaking capacity, ISI marked (IS 8828) complete.

S&F and concealing single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amp complete all as directed.

Supply and fixing Modular fan regulator 2 module stepped type 120W, 230 volts complete all as directed.

Supply & hanging of ceiling fan , BEE 5 star (ES-50) rated high speed 1200 mm sweep, 230 Volts, 50 Hz complete with blades, downrods, and all accessories as required and provision of 3 core flexible copper conductor cable of suitable size and connecting up from existing ceiling rose to fan complete all as specified and directed.

Taking down old unserviceable light fitting of any make/type supply and fixing LED street light fitting 40 watt complete with Pressure die cast aluminum housing enclosed with Heat resistant glass cover in frame complete with IP 66 protection and making electrical connection with using copper conductor 23/ 0.0076 round PVC insulated and sheathed three core cable including 40 mm bore GI pipe bracket 1.2 mtr length bend to shape, fixing on wall using nuts, bolts & clamps as required complete all as directed. Make Philips Cat no. BRP409LED040CWHOMRFGS1PSUGR or equivalent make in Wipro/Cromption/Havells/Bajaj.

Supply & Fix onload changeover switch in sheet steel enclosure, front handle operation, fixed on wall using suitable nuts, bolts and washers etc, 4 pole, 100 Amp, 415 Volts, including making connections complete all as directed.

Taking down old unserviceable light fitting of any make/type supply and fixing LED light fitting 45W slim energy saving channel luminaries sirface/recess mouting LED ceiling light with extruded aluminium and milky and making electrical connection with using copper conductor 23/ 0.0076 round PVC insulated and sheathed three core cable with complete accessories as per directed. Make : Philips cat no RC380BLED42S6500G4L60W60PSUOD or equivalent make in Wipro/Cromption/Havells/Bajaj.

Taking down old unserviceable light fitting of any make/type supply and fixing industrial batten suitable for suspended on surface with iron downrod of length up to 1.5 mtr mounting rail for TLED lamps suitable for 2 x 18 watts LED tubelight fitting 2 x LED tube, T8, 18W, 2100 luman output, with built in driver, reflector and polycarbonate body including connecting cable PVC insulated and PVC sheathed copper flxible cable of size 16/0.20 mm necessary fixing arrangment all as directed. Make - Philips Cat Part no TMC 501P2xT-LED22WP3242 including for fittng and cat part no of LED tube MASLEDTUBE1200MM18W865T8-I 2100lm or equivalent make in Wipro/Cromption/Havells/Bajaj. Note :- For item No. 110, 112 & 113. (a) LED chip, driver and housing of the LED fitting shall be of same make. (b) LED fitting/Lamp shall be provided with LM79 & 80 test certificate and eye certification bilogically tested.

Rai Construction Co

mandeka constructions

TRISHLA CONSTRUCTIONS