Upgradation of Kangu Galu to Amroh Via Kalahu road km 0/0 to 6/756

Amount

Excavation in hilly areas in all heights and depths and in all kinds of soil by manual/mechanical means including saturated soil comprising of ordinary soil, soft rocks, hard rocks, chiseling/wedging out of rock (where blasting is prohibited) and other intermediate classification of soil, setting out true to the required lines, grades width cutting and trimming of side slopes and level as shown in the drawing and as directed by the Engineer-in-Charge at site according to the MORD technical specification clause 302,1603.1, 1603.2 and sorting out useful materials and stacking the same in all leads and lifts in acquired width of the road and transportation of un-useful material for filling in road ways, camber, embankments for grade improvements and disposal of all surplus un-useful material to acquired width of the road or on approved dumping sites through all modes of transportation including head load or animals transport or mechanical means alongwith its leveling fine dressing and carriage of machineries, materials, tools equipments and safety measures and other incidentals necessary to complete the work by mechanical means and/or labour if required. Any loss to the public/private property during the course of execution shall be the absolute responsibility of the contractor which shall have to be duly compensated by him in all cases as per direction of the Engineer-in-Charge including carriage of material within all leads and lifts. A recovery of useful stone for 30.11 cum (Thirty point Eleven) cubic metre @ Rs. 300/- (Rupees Three hundred only) per cubic metre shall be effected on pro-rata basis in each running bill from this item. The rates are excluding GST and inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes imposed by the Government.

Earth work in excavation for all type of road structure such as retaining walls, breast walls, culverts, drains and parapets etcetra in all type of classification of soil comprising of ordinary soil, ordinary rock, hard rocks, chiseling/wedging out of rocks (where blasting is prohibited) as per drawings and technical specification clause 305.1 and as per direction of the Engineer-in-Charge including setting out, construction of shoring and bracing, removal of stumps and other deleterious materials and disposal of materials upto all leads and lift including dressing of sides and bottom and back filling in trenches with excavated suitable approved material to the original surface in layers not exceeding 150mm (One hundred fifty millimetre) compacted thickness including shoring and strutting and pumping and bailing out water (surface and sub soil water) upto any depth and any quantum of water including cleaning of slush which may arise out during dewatering as per the direction of the Engineer-in-Charge and carriage of material within all leads and lifts and other incidentals The rates are excluding GST and inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes imposed by the Government.

Providing and laying plain/reinforced cement concrete mechanically mixed and vibrated in open foundation retaining walls, breast walls and like substructures etcetra complete as per drawings nominal mix 1:5:10 (One cement : five sand : Ten graded crushed stone aggregate) 40mm (Forty millimetres) nominal size including cost of form work and curing complete without plum as per HPPWD specification complete in all respect including entire carriage of materials within all leads and lifts and other incidentals. The rates are excluding GST and inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes imposed by the Government.

Back filling behind abutment , wing walls and return walls complete as per drawings and MORD technical specification 2014 Clause 1204 and as per direction of Engineer-in-Charge including entire carriage of materials within all leads and lifts and other incidentals. The rates are excluding GST and inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes imposed by the Government.

Providing weep holes in brick masonry / Stone masonry / plain/reinforced concrete in retaining walls, breast walls and the like with 100mm ( One hundred millimetre ) dia PVC pipe Finolex/ Supreme having pressure not less than 4.00 Kg/Cm² ( four kilogramm ) per centimetre square extending through the full width of the structure with slope of 1(V):20(H) ( one vertical : twenty horizontal ) towards drawing face complete as per drawing and MORD technical specification 2014 clauses 614,709,1204. in all leads and lifts and carriage of material by all modes of transportation as per the direction of Engineer- in-chrage. The rates are excluding GST and inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes imposed by the Government.

Providing and construction of a gabian structure for retaining earth with segments of wire crates of size 7mx3mx0.6m (seven metre into three metre into zero point six metre) each divided into 1.5m (one point five metre) compartments by cross netting, made from 4mm (four millimetre) galvanized steel wire @ 32kg. (thirty two kilogram) per 10sqm. ( ten square metre) having minimum tensile strength of 300 Mpa conforming to IS: 280 and galvanizing coating conforming to IS: 4826 woven into mesh with double twist, mesh size not exceeding 100x100mm (one hundred into one hundred millimetre) filled with boulders with least dimension of 20mm (twenty millimetre), all loose ends to be tied with 4mm (four millimetre) galvanized steel wire, with in all leads and lifts, other incidentals and carriage of material by all modes of transportation as per the direction of Engineer- in-chrage. The rates are excluding GST and inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated concrete for plain/reinforced concrete in sub structures , drains and open foundation for all type of structures complete of plain cement concrete desing mix of Grade M-10 (ten) with cement content 250 kg (two hundred fifty kilograms) per cubic metre on ground or under water and curing complete including pumping or bailing out water, dewatering removal of slush as required at site which may arise at the time of laying under water complete for all heights/depths including the cost of form work as per drawings and technical specification clause 802, 803, 1202 and 1203 as per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals. The rates are excluding GST and inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes imposed by the Government.

Providing and Erecting Type -A "W" metal beam crash barrier comprising of 3 mm ( Three millimetre) thick corrugated sheet metal beam rail to be kept 70 cm (Seventy centimetre) above road/ground level and to be fixed on ISMC series channel vertical post, 150 x 75 x 5 mm (One hundred fifty into seventy five into five millimetre) to be spaced 2 m (Two metre) centre to centre to be kept 1.80 mtr.(One point eight zero metre) high 1.1mtr.(one point one metre) below ground/ road level. All steel parts and fitments to be galvanised by hot dip process.All fittings to conform to IS:1367 and IS:1364, metal beam rail to be fixed on the vertical post with a spacer of channel section 150 x 75 x 5 mm (One hundred fifty into seventy five into five millimetre) and 330 mm (Three hundred thirty millimetre) long complete as per clause 811 conforming to MORT & H ( Ministry of road transport and Highway specification ( Latest revision ) including all fitting required for erecting at road site of materials. The rates are excluding GST and inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes imposed by the Government.

Stone soling properly hand packed filling interstices with spells and consolidating with power road roller to the required gradient and camber including spreading watering and rolling of binding materials moorum or earth etcetera. complete as per HP:PWD., specification, 100mm(one hundred millimetre) spread thickness (finished work including materials and labour) as per direction of Engineer-in-Charge including entire carriage of materials within all leads and lifts and other incidentals. The rates are excluding GST and inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated plain cement concrete 1:4:8 (One cement : four sand : eight graded crushed stone aggregate) 25mm (twenty five millimetre) nominal size in foundation and plinth of Toe wall and catch pit complete as per drawing and technical specifications Clause 802, 803, 1202 & 1203 as per the direction of the Engineer-in-Charge including carriage of material with in all leads and lifts and other incidentals. The rates are excluding GST and inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated concrete for plain/reinforced concrete in open foundation for all type of structure complete of plain cement concrete design mix of Grade M-20 (twenty) with cement content 330 kg (Three hundred thirty kilogram) per cubic metre on ground or under water and curing complete including pumping or bailing out water, dewatering removal of slush as required at site which may arise at the time of laying under water complete for all heights/depths including the cost of form work as per drawings and technical specification clause 802, 805,806,807, 1202 and 1203 as per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals. The rates are excluding GST and inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes imposed by the Government.

Loosening of the ground upto a level of 300 mm ( three hundred milimetre) below the subgrade level, watered, graded and compacted in layers to meet requirement of Tables 300.1 and 300.2 for subgrade construction as per Technical Specification Clause 303.5.2 and as per direction of Engineer-in-Charge including entire carriage of materials within all leads and lifts and other incidentals. The rates are excluding GST and inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes imposed by the Government.

Scarifying the existing bituminous road surface with scarifying machine upto a depth of 150 mm (one hundred fifty milimetre) and disposal of scarified material as per the direction of Engineer-in-Charge and carriage of material within all leads and lifts and other incidentals. The rates are excluding GST and inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes imposed by the Government.

Construction of Gravel/soil aggregate base/sub base by providing well graded material nominal size maximum size grading 80mm (eighty millimetre) as per table 2.3 IRC SP 77-2008 spreading in uniform layers with Tractor mount appropriate grading arrangements on prepared surface, mixing by mix place method at OMC with Tractor mount appropriate rotavator attachment and compaction with three wheel 80-100KN static roller capacity to achieve the desired density, complete as per specification contained in Para 2.2,3.6 and 3.7 of IRC SP-77 2008 (By using Fresh material) and as per dirction of Engineer-in-charge including carriage of material within all leads and lifts. The rates are excluding GST and inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes imposed by the Government.

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kN ( eighty to hundred )weight to achieve the desired density including lighting, barricading and maintenance of diversion, etcetra as per Tables 400.11 & 400.12 and Technical Specification 2014 Clause 406 and as per direction of Engineer-in-Charge including entire carriage of materials within all leads and lifts and other incidentals. The rates are excluding GST and inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes imposed by the Government.

Providing and applying priming coat with bitumen Emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer @ 0.70 to 1.00kg/sqm (Zero point seven zero to one point zero kilogram per square metre ) using mechanical means as per Technical Specification Clause 502 and as per direction of Engineer-in-Charge including entire carriage of materials within all leads, lifts and other incidentals. The rates are excluding GST and inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes imposed by the Government.

Primer coat with silane Nano technology preparing and applying of water soluble organo silane nano technology (for bitumen emulsion application, IRC acredited with catirnie bitumen emulsion CSSI and water < 100 PPM TDS in ratio of 1kg. (one kilogramme) organo silane Nano technology: 100kg (one hundred kilogram) cationic bitument emulusion SS-I 200ltr. (Two hundred literes) water mixing and spraying tack coat 1 kg (one kilogram) of organic sliane nano technology and in 200ltr. (two hundred liters) water while filling water in drum and then add 100kg. (one hundred kilogram) cationic bitumen under circulate mix solutiuon completing spray the solution @ 1kg/sqm(one kilograne/square metre) of compacted stone base. Rate including all materials labour hire charge of machinery etc. complete as per MORD specification and direction of Engineer-in-Charge including entire carriage of materials within all leads, lifts and other incidentals. The rates are excluding GST and inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes imposed by the Government.

Providing and applying tack coat with bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 Kg to 0.30 Kg per sqm (Zero point two five to zero point three zero kilogram) per square metre on prepared bituminous surfaces cleaned with hydraulic broom as per technical specification clause 503 and as per direction of Engineer-in-Charge including entire carriage of materials within all leads and lifts and other incidentals. The rates are excluding GST and inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes imposed by the Government.

Providing and laying 50 mm( Fifty Millimeter) thick dense graded bituminous macadam using Bitumen VG-30 (thirty ) with hot mix plant producing an average output of 75tonne per hour using crushed aggregates of specified grading as per Table premixed with bituminous binder @ 4.25%(four point two five percent) by weight of total mix and filler , transporting the hot mix to work site laying with hydostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled vibratory and tandem roller to achive the desired compaction as per MORD as per Technical Specification Clause and as per direction of Engineer-in-Charge including entire carriage of materials within all leads and lifts and other incidentals. The rates are excluding GST and inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes imposed by the Government.

Providing and laying 25mm (Twenty five millimetre) thick semi dense bituminous concrete with VG-30(Viscosity grade thirty)100-120 TPH batch type hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder and filler specified material VG-30 (thirty) at the rate 5 (five ) per cent of mix prepared in bitumen and filler as per job mix formula, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORD specification 2014 clause No. 509 as per direction of Engineer-in-Charge including entire carriage of materials within all leads and lifts and other incidentals. The rates are excluding GST and inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes imposed by the Government.

Providing and laying semi dense bituminous concrete with 100-120 TPH batch type hoymix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder and filler specified material VG-30 (thirty) at the rate 5% (five ) per cent of mix prepared with addition of Silane Nonotechology (ZycoTherm) at the rate of 2% ( two percent) by weight of bitumen in bitumen and filler as per job mix formula, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORD specification 2014 clause No. 509 as per direction of Engineer-in-Charge including entire carriage of materials within all leads and lifts and other incidentals. The rates are excluding GST and inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes imposed by the Government.

Construction of road side V-shape drain of plain cement concrete 1:3:6(one cement : three sand: six graded stone aggregate 20mm (twenty millimetre) nominal size ) 10cm (ten centimetre) thick concrete and of 45x25cm (forty five into twenty five centimetre) size in accordance with the requirement of specification true to lines and grades dimensions and other particulars as per drawing and technical specification and as per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals.The rates are excluding GST and inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes imposed by the Government.

Construction of parapets with cement concrete 1:5:10 (One cement : five sand : ten crushed graded stone aggregate) 40mm (Forty millimetre) nominal size and curing complete including the cost of form work with steel plates as per drawing and HPPWD, technical specification and as per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals. The rates are excluding GST and inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes imposed by the Government.

Providing and fixing retro - reflectorised Traffic Signs 900x900x900mm ( nine hundred into nine hundred into nine hundred milimetre) triangular of retro reflectorised cautionary, mandatory and informatory sign as per IRC 67 made of encapsulated lens type reflective sheeting wise clause 1701.2.3 fixed over aluminum sheeting 1.5mm ( one point five milimetre) thick supported on a mild steel angle iron ( TATA/SAIL) post 75mmx75mmx6mm (Seventy five into Seventy five into Six millimetre) firmly fixed to the ground by means of properly designed foundation with M-15 (M-Fifteen) grade cement concrete 450mmx450mmx600mmx600mm (Four hundred fifty into four hundred fifty into six hundred in to Six hundred millimetre) below ground level as per drawings and technical specifications clause 801 as per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals. The rates are excluding GST and inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes imposed by the Government.

Providing and fixing of typical PMGSY informatory sign board with Logo as per MORD specifications and drawing. Three MS Plates of 1.6 mm (One point six millimetre) thick, top and middle plate duly welded with MS flat iron( TATA/SAIL) 25mm x 5m (Twenty five millimetre into five metre) size on back on edges. The lower plate will be welded with MS angle iron frame of 25mm x 25mmx5mm (Twenty five into twenty five into five millimetre). The angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos. (Two numbers)75mm x 75mm ( Seventy five millimetre into seventy five millimetre) of 12 (Twelve) SWG sheet tubes posts ( TATA/SAIL) duly embedded in cement concrete M-15 grade blocks of 450mm x 450mm x 600 mm, 600mm (Four hundred fifty into four hundred fifty into six hundred millimetre, six hundred millimetre) below ground level. The top most diamond plate will be welded to middle plate by 47mm x 47mm (Forty seven millimetre into forty seven millimetre) of 12 (Twelve) SWG steel plate tube. All M.S. will be stove embedded on both sides. Lettering and printing arrows, border etcetra will be painted with readymixed synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing Clause 1701 and Annexure 1700.1 as per approved drawing Clause 1701.2.2 including entire carriage of material within all leads and lifts and other incidentals. The rates are excluding GST and inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes imposed by the Government.

Providing and fixing 5th kilometre stone (precast) reinforced cement concrete mechanically mixed and vibrated desing mix of M-15 grade with cement content 275 kg (two hundred seventy five kilogram) per cubic metre, kilometre stone/ Local stone of standard design as per IRC :8 Fixing in position including painting and printing etcetra as per drawing and M.O.R.D. technical specification rural roads Clause 1703 as per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals. The rates are excluding GST and inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes imposed by the Government.

Providing and fixing Ordinary kilometre stone (precast) reinforced cement concrete mechanically mixed and vibrated design mix of M-15 grade with cement content 275 kg (two hundred seventy five kilograms) per cubic metre, kilometre stone/ Local stone of standard design as per IRC :8 Fixing in position including painting and printing etcetra as per drawing and M.O.R.D. technical specification rural roads Clause 1703 as per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals. The rates are excluding GST and inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes imposed by the Government.

Providing and fixing 200 (Two hundred) metre stone (precast) reinforced cement concrete mechanically mixed and vibrated design mix of M-15 grade with cement content 275 kg (two hundred seventy five kilograms) per cubic metre, kilometre stone/ Local stone of standard design as per IRC :8 Fixing in position including painting and printing etcetra as per drawing and M.O.R.D. technical specification rural roads Clause 1703 as per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals. The rates are excluding GST and inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes imposed by the Government.

Providing and fixing of road stud 100x100mm (one hundred into one hundred millimetres) size Yellow 3M Molded Shank RPM (ABS body) with one side Yellow and one side Red resistant to corrosive effect of salt and grit fitted with lense reflectors installed in concrete or asphaltic surface by drilling holes 30mm (thirty) millimetres upto a depth of 600mm (six hundred) millimtres and bedded in a suitable bituminious grout or epoxy mortar all as per BS:873 (Part4) 1973 as per direction of the Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals. The rates are excluding GST and inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes imposed by the Government.

Painting lines, dashes, arrowss etc. on roads with cold plastic road working paint conforming to IRC 35 1997 (1.5.4.2 on bituminous/concrete surface including cleaning the surface of all dirt, dust and other foreign matter demarcation at site and traffic control as per drawing and technical specification clause 1702 and as per direction of Engineer-in-Charge including entire carriage of material in all leads and lifts and other incidentals. The rates are excluding GST and inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes imposed by the Government.

Planting containerized tree plants/ bush seedings including piitting, tranplanting, compostin and mulching on slops 30 degree-45, pit size 60cm dismete x 60 cm (sixty centimeter x sixty centimeter) depth. Backfill with compost @ 0.0212 Cum/ pit,mixed with original soil (Cost of plants, FYM Shall be paid for separaterly) including entire carriage of materials with in all leads and lifts and other incidental. The rates are excluding GST and inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes imposed by the Government.

Planting containerized plans of appropriate species (size of plant should not be less than 60 Cms.) including transprotatin from the nursery site to the site of work as per direction of Engineer-in-Charge including entire carriage of material in all leads and lifts and other incidentals. The rates are excluding GST and inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes imposed by the Government.

Supplying and stacking of well decayed farm yard manure at the site of work as per instruction by the Engineer-in-charge.Thefram yard manure shall be free from earth stone,brick bats and other extraneous stuff. The stacks of F.Y.M. shuld be 5050cms. In height having valume not less than 3.00 Cum. The volume of the stacks shall be reduced by 8% for lossencess to arrive at the net quantity for payment as per direction of Engineer-in-Charge including entire carriage of material in all leads and lifts and other incidentals. The rates are excluding GST and inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes imposed by the Government.

Bamboo tree guard 1.80 (one point eight zero) meter high with 30Cms (thirty centimeter) dia with 4 Nos vertical strips(length 1.80 meter Breadth 30mm, thickness 5mm) further weaving with different smaller size of vertical and circular strips. The weaved portion shuld be 125 Cms (one hundred twenty five) having 3 rings at the top, bottom and middle portion. The firstring should be 55 cm (fifty five centimeter) above the four centimeter thick vertical strips i/c strengthening with binding wire as per direction of Engineer-in-Charge including entire carriage of material in all leads and lifts and other incidentals. The rates are excluding GST and inclusive of octroi, royality, malkana, toll tax, sale tax, or other taxes imposed by the Government.

Maintenance cost for 1st Year

Maintenance cost for 2nd year @ 8% on 1st Year

Maintenance cost for 3rd year @ 8% on 2nd Year

Maintenance cost for 4th year @ 8% on 3rd Year

Maintenance cost for 5th year @ 8% on 4th Year