Renovation work of Hostel Block, Lounge and Gym at Sushma Swaraj Institute of Foreign Service (SSIFS), Phase II, MEA, Ber Sarai, New Delhi

NAME OF WORK : PHASE-II RENOVATION AT SUSHMA SWARAJ INSTITUTE OF FOREIGN SERVICES (SSIFS) MEA, BER SARAI, NEW DELHI

DSR AMOUNT NDSR AMOUNT AMOUNT

S.NO. DESCRIPTION AMOUNT REMARKS

(in Rupees) (in Rupees) (in Lakh)

2 WATER PROOFING (Estimate Attached) 874111.90 1154182.31 2028294.21 20.28

5 ELECTRICAL WORKS & LV WORKS (Estiamte Attached) 3649454.00 887093.71 4536547.71 45.37

7 FURNITURE & GYM EQUIPMENTS 2034770.80 2034770.80 20.35

8 KITCHEN CHIMNY & DUCTING 5713221.05 5713221.05 57.13

Digitally signed by MAYANK

NAME OF WORK : PHASE-II RENOVATION AT SUSHMA SWARAJ INSTITUTE OF FOREIGN SERVICES (SSIFS) MEA, BER SARAI, NEW DELHI

SCHEDULE OF QUANTITIES FOR CIVIL WORKS

DESCRIPTION OF ITEMS UNIT QTY (GST ALTER. & CI) DSR AMOUNT NDSR AMOUNT

4 CONCRETE WORK

Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including

attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses,

parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor

five level, excluding the cost of centering, shuttering and finishing:

1:5:10 (1 cement: 5 coarse sand (zone-Ill) derived from natural sources : 10 graded stone aggregate 40

mm nominal size derived from natural sources).

SUB-TOTAL 371738.42 -

6 MASONRY WORK

Brick work with common burnt clay modular bricks of class designation 7.5 in foundation and plinth in

6.2.1 Cement mortar 1:4 (1 cement: 4 coarse sand) cum 4.54 6519.15 29596.94

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in

superstructure above plinth level up to floor V level.

6.13.2 Cement mortar 1:4 (1 cement :4 coarse sand) sqm 2.62 1126.26 2950.80

SUB-TOTAL 32547.74 -

8 CLADDING WORK

Providing and fixing 18mm thick gang saw cut mirror polished premoulded and prepolished) machine

cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size of

4 8.2 approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse

sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including

rubbing, curing, moulding and polishing to edge to give high gloss finish etc. complete at all levels.

8.2.2 Granite stone slab of colour black, Cherry/Ruby red

8.2.2.2 Area of slab over 0.50 sqm sqm 1.91 5147.55 9831.82

Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine

polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.

8.3.2 Granite work meter 4.85 512.07 2483.54

Digitally signed by MAYANK

DESCRIPTION OF ITEMS UNIT QTY (GST ALTER. & CI) DSR AMOUNT NDSR AMOUNT

Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform,

6 8.5 vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar each 4.00 980.84 3923.36

taps etc. including moulding, rubbing and polishing of cut edges etc. complete.

SUB-TOTAL 16238.72 -

9 WOOD AND PVC WORK

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought

7 9.1 framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold

fast lugs or dash fastener shall be paid for separately).

9.1.1 Second class teak wood cum 0.80 143262.76 114610.21

Providing and fixing ISi marked flush door shutters conforming to IS : 2202 (Part I) non-decorative

type, core of block board construction with frame of 1st class hard wood and well matched

commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of

9.21.2 30 mm thick including ISi marked Stainless Steel butt hinges with necessary screws sqm 15.43 2176.86 33588.95

Providing and fixing bright finished brass tower bolts (barrel type) with

necessary screws etc. complete :

Providing & Fixing decorative high pressure laminated sheet of plain I wood grain in gloss / matt/

9.127 suede finish with high density protective surface layer and reverse side of adhesive bonding quality

conforming to IS : 2046 Type S, including cost of adhesive of approved quality.

Digitally signed by MAYANK

DESCRIPTION OF ITEMS UNIT QTY (GST ALTER. & CI) DSR AMOUNT NDSR AMOUNT

Providing and fixing factory made ISI marked partially insulated metal fire rated doorset assembly for

staircase / exit pathway and refuge areas applications. consisting of galvanized iron steel frame and

double leaf shutter including necessary hardware accessories, conforming to FD 120 PI classification

of IS 3614 :2021 with fire rating of 120 minutes integrity and 30 minutes insulation. The door frame

and shutter shall be made out of minimum 1.20 mm thick GI Sheet with minimum 120 GSM Zinc

coating as per IS: 277. The entire fire rated doorset assembly shall be tested in latched œndition as

per IS 17518 (Parl -1) 2022

The frame shall be of minimum size 90 x 60 mm with grooved profile to take appropriate fire rated

smoke seal, having mitred cut joint (self tab/sczewed assembleö at site) anô provided with

appropriate reinforœment suitable for taking hardware and flush fixing as per IS 4351. The smoke

seat material shall be of EPDM tested in accordane with ASTM EÆ 4 of minimum size 10* 4mm, fixed

within the inbuilt groove or stuck with adhesive on the entire perimeter of the frame. The door frame

shall be fixed to the three sides to masonary wall opening with CSK/Hex headed fastner of minimum 8

mm dia size and minimum 80mm Iong hot dip galvanized with 8mm dia Polyamide sleeves @ 5

number at each on vertical side and 3 number on lop side.

The double skinned double deal parlially insulated door shutters shall be consisting of minimum 50

mm thickness and having box like structure, slots cut and holes punched, for fixing of hardwares with

stiffners as per IS: 16074 including resin bonded mineral wool / ceramic wool infill material of

minimum density 96 kg/cum. Each door leaf shall be provided with vision panel having maximum area

of 0.06 sqm, of 120 minute fire rated minimum 6 mm thick clear borosilicate glass pane fixed with clip-

on arrangement and fire rated ceramic tape having minimum size 13x2 mm to be fixed all around the

glass on both the sides. The intumescent seal of minimum size 15x1.5 mm or of size as per test

evidence shall be fixed on all the three edges of the door leaves. Integral astragals to be provided for

double teaf door on the meeting style each on active and inactive leaf. The door shutters shall be

mounted on the frame with SS 304 grade ball bearing butt hinges as per EN t935 : 2002 or butt hinges

as per IS 12817, of minimum size 100x75x3 mm @ 5 numbers hinges upto 2400mm height or as per

test evidence, whichever is more fixed with M6 25 scraws. AII doors shall be Factory prepared for

receiving appropriate hardware and provided with neccessary reinforcement for hardware

Digitally signed by MAYANK

DESCRIPTION OF ITEMS UNIT QTY (GST ALTER. & CI) DSR AMOUNT NDSR AMOUNT

Accessories Hardware :

Fire doorset assembly shall be provided with one number of single point panic push bar across bar) for

active leaf and one number double point panic push bar across bar) with bottom strike of desired

finish with verticle shoot bolt on top and bottom for inactive leaf of double leaf door as per EN 1125,

one number external trim with half cylinder 42 mm long with one side key as per EN 1125, two

number heavy duty door closers of size EN 3-5 with standard arm with of desired finish (suitable for

1250 mm wide door leaf} conforming to IS 3564 / EN 1154, and one number surface mounted door

coordinator for sequencing of closing.

Both frame and door shutters shall be factory finished with polyester powder coating of minimum 50

microns thick and shall have passed salt spray test as per IS:13871 of approved colour and

shade all complete as per manufacturer's specifications and as per direction of the Engineer-in-

Installation: The hollow space in the door frame shall be filled / injected with fire rated self

extinguishing type polyurethane foam (PUF) after installation at site of work. The rate shall be

inclusive of complete fire rated door assembly, supply and installation by the approved manufacturer.

Double leaf partially Insulated metal fire rated doorset of FD 120 PI classification with 120 minutes

integrity and 30 minutes insulation as per IS 3614:2021 for Staircase/ Exit pathway / Refuge area etc.

Providing and fixing keyless stainless steel (SS304)cylindrical locks for bathroom and toilet doors for

residential & commercial spaces for door thickness 32mm to 45mm with minimum 5 years warranty

52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick

cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and

top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone

aggregate 6 mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or

as per manufacturer's specifications. This includes cost of cement slurry, but excluding the cost of

nosing of steps etc. complete.

Digitally signed by MAYANK

DESCRIPTION OF ITEMS UNIT QTY (GST ALTER. & CI) DSR AMOUNT NDSR AMOUNT

Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the

manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand

& manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse

12 11.41A sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement

and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying

of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system

and rubber mallet for placing the tiles gently and easily.

11.41A.3 Glazed Vitrified tiles Matt/Antiskid finish of size

Providing and laying Vitrified tiles/Ceramic tiles in different sizes (thickness to be specified by the

manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand

13 11.47 & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high

polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm

thickness, including grouting of joints (Payment for grouting of joints to be made separately).

VINYL FLOORING: Prefabricated sport surface 6.2mm point elastic multipurpose PVC sport surface

shall be protected by a clear layer of pure PVC (Polyvinyl Chloride) and Top Clean, a factory applied UV

cured urethane treatment.Flooring having Total weight EN ISO 23997 (EN 430) 3950g/m², Friction EN

13036-4 80 to 110, Shock absorption EN 14808 ≥25% (P1), Microorganisms action ISO 846 – Method C

Does not constitute a nutrient medium for bacteria , with 15 years commercial use warranty.

14 MR 2 Intermediate layers shall be fortified with a non-woven fiber glass grid for increased dimensional sqm 300.00 5576.51 16,72,953.00

stability with phthale free having Good shock absorption level, shock absorption: ≥4% & Vertical

deformation <5mm , Exceptional resistance to static loads (chairs, tables, bleachers), Superior

resistance to heavy rolling loads (trolleys…), Impact sound reduction 65DB Class A. Resistance to stains

Providing and fixing 10mm thick High quality, high density (1.2 to 1.5 gram/cu.cm.), durable rubber

flooring. The flooring should have excellent shock absorption capabilities to reduce impact on joints &

prevent injuries, high coefficient of friction rating more than 0.6 and effective noise reduction

capabilities to minimize sound levels. The fooring should have high resistance to wear and tear, heavy

15 MR 3 foot traffic and equipment usage. It should meeets fire safety regulations and standards as per sqm 170.00 1394.14 2,37,003.80

relevant code. The flooring should feature anti-micobial properties to reduce the growth of bacteria

and odur causing microorganisms. The manufacturer should have ISO 9001 certification for quality

management. The work should be exeucted as per best engineering practice.

12 ROOFING WORK Digitally signed by MAYANK

DESCRIPTION OF ITEMS UNIT QTY (GST ALTER. & CI) DSR AMOUNT NDSR AMOUNT

Providing and fixing false ceiling at all heights including providing and fixing of frame work made of

special sections, power pressed from M.S.sheets and galvanized with zinc coating of 120 gms/sqm

(both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick

with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with

dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle

hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle

hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre

to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of

26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction

perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm

long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having

16 12.45 flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl

plugs at 450 mm centre, with 25 mm long dry wall screws @ 230 mm interval, including fixing of

gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25

mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the

board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3

layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as

per manufacturer's specification and also including the cost of making openings for light fittings, grills,

diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings,

specification and direction of the Engineer in Charge but excluding the cost of painting with :

12.45.3 12.5 mm thick tapered edge gypsum moisture resistant board Sqm 120.00 1532.45 183893.85

Digitally signed by MAYANK

DESCRIPTION OF ITEMS UNIT QTY (GST ALTER. & CI) DSR AMOUNT NDSR AMOUNT

U Baffle with 130B infill using customized carrier system to hold both the panels Supply &Fixing of Roll

formed U-Baffle Ceiling System along with 130B infill panel fixed to custom made carrier system,

comprising of Roll formed U-baffle width of 25 mm and height of 100 mm manufactured out of 0.6

mm thick Aluminium along with 130 mm Linear panel manufactured out of 0.6mm thick Aluminium

Perforated with 2.0mm dia with 5mm pitch to form 16% openness with Acoustical NWT self-glued to

the panel on a continuous roll forming line, Coil Coated Aluminium of alloy AA 3105 at a module of

166 mm. The U baffle and 130B shall be manufactured on an integrated high speed, high precision Roll

forming machine to avoid micro-cracking of metal corners which occurs while bending on press brake

machines. The U baffle and 130B panel coil is coated with Interior Polyester Paint on a continuous

paint line double baked and shall be stove enamelled in a continuous coil coating process with the

approved colour on the exposed side and the reverse side with polyester primer. The coated coil is

passed thru ARKU SIX Hi configuration roller levelling process to ensure the flatness of the coil. The

manufacturer should be ISO 9001:2015 Quality Management System Certification compliant with in

house testing facility and should have their own manufacturing plant with the past history and

experience on supply of Metal ceiling to Bangladesh, Asian and Europe airport projects. Carrier: The

Panel shall be clipped to a backed enamelled aluminium panel carrier of0.9mm thick in standard

length of 5 mtrs made of double backed enamelled aluminium alloy AA3105/AL3005 (Al.Mg) black

with cut outs to hold the panels in a module of 166mm. Suspension: The carrier shall be suspended

with M6 Threaded rod hangers spaced at1200mm c/c. The length of the panel shall be up to 2400mm.

Paint finish: Aluminium panels shall be chromatised for maximum bond between metal and paint,

enamelled twice under high temperature, one side with full primer and finish coat, the other side

(inner side) with a primer coating and

skin coat on a Continuous Paint Line. Suspension System: As per manufacturer standard it is

recommend to have minimum gap of 250mm between plenum and its baffle top surface height for

easy engagement of spring. Mode of Measurements: Measurements shall be wall to wall, measuring

the Surface / plan area without any deductions for lights, diffusers, columns or any other openings etc.

Metal Ceiling shall be Green pro Certified: For LEED certification by Indian Green Building council

(IGBC) and vendor should have factory setup in India at least from 20 years .Cladding manufacturer

should have in-house testing lab in India. U Baffle 25 X 100-166 Module with Infill Perforated 80B

Linear metal Ceiling Color-HDI Woodfinish

13 FINISHING WORK

1 13.1 Cement Plaster (in Fine Sand) 12 mm cement plaster of mix :

Digitally signed by MAYANK

DESCRIPTION OF ITEMS UNIT QTY (GST ALTER. & CI) DSR AMOUNT NDSR AMOUNT

2 13.16 6 mm cement plaster of mix :

Extra for providing and mixing water proofing material in cement plaster work in proportion

recommended by the manufacturers.

4 13.80 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and sqm 1842.55 156.39 288156.39

manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic

5 13.83 Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying

additional coats wherever required to achieve even shade and colour.

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile

Organic Compound ) content

13.85.3 With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre sqm 1842.55 74.11 136551.38

STUCCO PAINT: Supply & Apply of Stucco Metallico with Ceramic & Silicone technology, Fire Resistant,

Insulation and Ultra Violet resistant in approved shade, as per the following specifications:-

Application of Perma Polyunder Acrylic Sealer with silicone as base coat, Minor Repair work shall be

done by Putty where ever required, Application of Stucco Metallico in desired shade & pattern with

8 MR 6 Providing and fixing wooden veneer panelling of approved species, shade and texture, with approved sqm 16.83 6970.71 117317.05

polish/PU finish, complete as per approved, specifications and as directed by the Engineer-in-Charge.

Digitally signed by MAYANK

DESCRIPTION OF ITEMS UNIT QTY (GST ALTER. & CI) DSR AMOUNT NDSR AMOUNT

BLINDS: Providing and fixing motorized soft, elegant fashion and function of contour window shadings

with 4 inches vanes that makes this remarkable window covering a truly unique innovation. The blind

has sheer fabric at the back and the vanes contract and expand at it giving an impression of vanes

floating on the sheer. The headrail and bottom rail are made of aluminum alloy extruded profile,

powder coated and provided with same fabric as per the blind fabric selection.Textured fabrics in a

palette of delightful colours transform from cascading folds to contoured vanes, allowing a softened

outside view through the sheer backing, while also providing excellent ultraviolet protection. The

fabric opacity is room darkening with 5’’ vane size and comes with Six beautifully textured fabric styles

— India Silk, Linen, Satin, Satin Metallic, Shantung and Stria. The blind has matching fabric-covered

headrail and bottom rail create a unified look from top to bottom. The headrail conceals and protects

the shading when raised — no fabric stack to obstruct the outside view.

Motor: AC Silent Motor with noise level of 40dB operating on Pebble Remote for better ergonomics

having 6 channels for multiple shades operation. It comes with a Built- In Dry contact input pot on the

motor head for low voltage automation convenience. The remote and motor operate on a frequency

which is 2.4 Ghz used for regular civil operation. Motor embedded with advanced features and

technology of voice enabled control when used along with Hub and WiFi Nominal Torque (Nm): 3

Output Speed: 30 rpm Limit switch turns: 160 revolutions Mains Voltage: 230V / 50Hz, Power

Consumption: 90 W Nominal Current Consumption (A): 0.39 Operating Mode: 4 Min Degree of

Protection: IP 44 .

Remote: Supply and programming of pebble remote that comes in two colour options with pebble in

ten different colours that is used to move blinds UP, DOWN, START and STOP with single comand. It

comes with six different channels with each channel can have upto 6 blinds paired. It also has

favourite button to set favourite blind position and all blinds paired with the remote goes to favouite

position with single click. All the keys in the remote lights up once touched. The remote has ALL button

by which all the blinds programmed to the remote can be operated all together.

Providing and fixing 5 mm thick mirror of required size with polished edges, fixed to the wall using

10 MR 8 mirror adhesive or stainless steel mirror clips/fasteners (where required), complete as per directed by sqm 55.00 2401.02 1,32,056.10

the Engineer-in-Charge.

Supply and application of graphics of required design, size and colour, including printing on premium

quality self-adhesive, lamination, surface preparation, cutting, positioning, fixing, finishing and all

necessary materials complete as per approved drawings/specifications and as directed by the Engineer-

SIGNAGE: Size 250mm by 200mmProviding a signs made as using modular aluminium extrusions (alloy

12 MR 10 6060 as per european standards en755-2-2008 tensile strength 190 Mpa typical BHN is 70 from virgin each 10.00 3052.33 30523.30

aluminium homogeneous billet) with premium grade anodizing (thickness 15-20 microns)

14 REPAIRS TO BUILDING Digitally signed by MAYANK

DESCRIPTION OF ITEMS UNIT QTY (GST ALTER. & CI) DSR AMOUNT NDSR AMOUNT

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including

cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the

walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of

Engineer-in-Charge

14.1.1 With cement mortar 1:4 (1 cement : 4 fine sand) sqm 120.00 548.60 65832.00

SUB-TOTAL 65832.00 -

15 DISMANTLING AND DEMOLISHING

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats,

architrave, holdfasts etc. complete and stacking within 50 metres lead :

15.12.1 Of area 3 sq. metres and below each 22.00 368.00 8096.00

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50

15.23.1 For thickness of tiles 10 mm to 25 mm sqm 600.00 73.56 44136.00

Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and

disposal of unserviceable material within 50 metres lead.

17 15.2 Demolishing cement concrete manually/ by mechanical means including disposal of material within 50

metres lead as per direction of Engineer - in - charge.

(i) 15.2.1 Nominal concrete 1:3:6 or richer mix (including equivalent design mix) cum 350.00 2439.58 853853.00

(ii) 15.2.2 Nominal concrete 1:4:8 or leaner mix (including equivalent design mix) cum 43.54 1506.89 65609.99

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and

disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.

15.7.4 In cement mortar cum 46.11 2064.71 95203.78

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including

disposal of rubbish to the dumping ground within 50 metres lead.

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by

20 15.60 mechanical means, including loading, transporting, unloading to approved municipal dumping ground cum 1799.12 264.53 475921.21

or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.

Digitally signed by MAYANK

DESCRIPTION OF ITEMS UNIT QTY (GST ALTER. & CI) DSR AMOUNT NDSR AMOUNT

SUB-TOTAL 1598431.68 -

21 ALUMINIUM WORK

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built

up standard tubular sections/ appropriate Z sections and other sections of approved make conforming

to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up

the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc.

Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever

required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless

steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.

(Glazing, paneling and dash fasteners to be paid for separately) :

21.1.1 For fixed portion

21.1.1.2 Powder coated aluminium (minimum thickness of powder coating 50 micron) kg 688.20 532.06 366163.69

For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making

22 21.1.2 provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket

required (Fittings shall be paid for separately)

21.1.2.2 Powder coated aluminium (minimum thickness of powder coating 50 micron) kg 278.82 635.84 177284.91

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with

23 21.3 EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of

engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):

21.3.3 With float glass panes of 8 mm thickness (weight not less than 20 kg/sqm) sqm 18.59 1689.09 31400.18

Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather

24 21.8 silicon sealant over backer rod of approved quality as per architectural drawings and direction of

Engineer-in-charge complete.

21.8.1 Upto 5 mm depth and 5 mm width meter 135.59 96.96 13146.81

Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and

manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring

type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete

as per direction of Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately).

SUB-TOTAL 608385.07 -

DSR & NDSR AMOUNT 4931269.52 6169452.69

GROSS AMOUNT IN RUPEES Digitally signed by MAYANK 11100722.21

DESCRIPTION OF ITEMS UNIT QTY (GST ALTER. & CI) DSR AMOUNT NDSR AMOUNT

AMOUNT IN LAKHS 111.01

Digitally signed by MAYANK

NAME OF WORK : PHASE-II RENOVATION AT SUSHMA SWARAJ INSTITUTE OF FOREIGN SERVICES (SSIFS) MEA, BER SARAI, NEW DELHI

SCHEDULE OF QUANTITIES FOR WATER PROOFING

(GST ALTER. DSR NDSR

S.NO REF. DESCRIPTION OF ITEMS UOM QUANTITY

& CI) /NDSR AMOUNT AMOUNT

Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement: 2 coarse sand : 4 stone

1 12.21 aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1

cement : 3 fine sand) as per standard design :

12.21.1 In 75x75 mm deep chase

Large Planter Meter 150

Small Planter Meter 120

Filling the gap in between aluminium/ stone/ wood frame and adjacent RCC/Brick/

Stone/ wood/ Ceramic/ Gypsum work by providing weather/structural non sag

2 21.19 elastomeric PU sealant over backer rod of approved quality as per architectural

drawings and direction of Engineer-in-charge complete, complying to ASTM C920, DIN

21.19.3 Upto 20 mm depth and 20 mm width

Large Planter Meter 280

Small Planter Meter 150

Sealant to Window Frame/Joints in gym RMTR 100

Conduit sealing in gym RMTR 100

In rooms, AC cutout sealing, electrical conduit sealing , bathroom waterproofing , Geyser

internal pipe replacement & sealing. Bathroom – water proofing – removal of existing RMTR 60

system, reaching to mother surface , sealing of drain points, replacing internal pipes.

Rising Dampness in gym RMTR 40

Providing and spray applying two component hybrid polyurea polyurethane

3 22.28A.1 waterproofing system at all levels for podium garden waterproofing by the manufacturer

or his approved applicator consisting of following operations:

a) Dismantling the existing cement plaster of brick masonary wall including disposal of

b) 15mm cement plaster with cement mortar 1: 3 (1 Cement : 3 coarse sand) over a coat

of cement slurry @ 2.0 kg/sqm.

c) Providing and laying coving in concave shape of cement concrete 1: 1.5: 3 (1 Cement

: 1.5 Coarse sand : 3 graded stone aggregate 20mm nominal size)of size 75mm x 75

mm at the junction of vertical wall and horizontal surface along the length of the wall.

Digitally signed by MAYANK

(GST ALTER. DSR NDSR

S.NO REF. DESCRIPTION OF ITEMS UOM QUANTITY

& CI) /NDSR AMOUNT AMOUNT

e) Providing and applying by spray ro brush, two component solvent free resin/ epoxy

primer mixed in proportion by volume / weight as recommended by manufacturer over

cement concrete in dry condition, having consumption varies from 0.20 to 0.40 kg/sqm.

depending on the porosity and undulations in the surface.

f) Providing and sprinkling washed coarse sand as recommended by manufacturer over

freshly laid primed tacky surface @ 0.40 to 0.50 kg/sqm. as directed by the Engineer in

g) Over primed sandy surface, providing and spray applying two component hybrid

polyurea polyurethane coating system, which shall be solvent free, mixed in proportion

by volume / weight as recommended by the manufacturer having elongation > 400%,

Shore A Hardness > 75 (after 28 days), tensile strength of minimum of 10 MPa as per

DIN /ASTM and Tear strength minimum 30 N/mm as per DIN 53515 or minimum 45

N/mm as per ASTM D624 and 20 second maximum gel time / reaction time with

minimum 1.5 mm dry film thickness of two coats.

Old work on brick masonry wall (Large Planters) SQM 150

Providing and injecting approved grout in proportion recommended by the manufacturer

into cracks/honey-comb area of concrete/masonry by suitable gun/pump at required

4 26.35 pressure including cutting of nipples after curing etc. complete as per directions of

Engineer-in-Charge.(The payment shall be made on the basis of actual weight of

approved grout injected.)

Epoxy injection grout in concrete/RCC work of approved

Gym Area KG 200

Drain board with filter media:

Installation of Rolled Matrix Soil Filter cum surface drainage System as per

1 MR 11 manufacturers' specifications consist of dimple raised, moulded polypropylene sheet SQM 200 ₹ 677.47 1,35,494.00

bonded to a high strength polypropylene geotextile fabric having compressive strength of

>400 Kg / Sq.mt. and thickness of 10 – 12 mm.

Dry mortar for plastering and masonry: Product based on high resistance cement,

selected aggregates, and other additives as per UNE-EN 998-1 Classification GP CSIV

2 MR 12 W0. 25 mm Basecoat with anti-alkaline glass fibre mesh to avoid fissures as per

manufacturer's recommendation and application in zones created using Corner strips

and PVC Strips for accommodating the thermal expansion & contraction of the mortars.

Wall Area in gym SQM 50

In rooms, bathroom waterproofing ,Bathroom water proofing SQM 100

Digitally signed by MAYANK

(GST ALTER. DSR NDSR

S.NO REF. DESCRIPTION OF ITEMS UOM QUANTITY

& CI) /NDSR AMOUNT AMOUNT

surface must be brought into surface saturated dry condition (SSD). Providing &

Applying 2 coats of high performance two component high performance cementitious

waterproof coating, with a mix ratio of (liquid: Powder), parts by wt. - 1:1.2 at the rate 3

Kg/Sqm in 3 or more coats to achieve the DFT of atleast 2 mm in a span of 4 - 6 hours

with a roller / brush on the prepared concrete substrate. All the coats to be applied in

perpendicular direction to each other. Allow the coating to air cure for 3-5 days before

conducting water ponding test for 24 Hrs. The coating shall have Elongation at break >

200% as per ASTM D 412, Tensile strength > 1.2 N/mm2 as per ASTM D 412, Adhesion

strength: 1 N/mm2 as per ASTM D 7234, crack bridging upto 2mm as per EN1062,

Water penetration (5 bar pressure) as per BS EN 12390.

Rising Dampness in gym SQM 56.5

Drainpipes and Core Cut treatment: Cleaning and preparation of surface with the help of

wire brush or grinder. Clean the surface with water to remove the dust. Insert the pipe

with a non reinforced twin side adhesive bitumen membrane which comprises of

polymerised bitumen sandwiched between a plastic released films on either side.

wrapped over the pipe into the core and support with formwork. Pack the core cut

junction with non-shrink free flow cementitious grout or Micro Concrete. Mix ready to

use grout with water @ ratio of w/p = 0.13 – 0.15 (depending upon the flowability

required) with paddle mixer and pour by providing necessary shuttering and support.

Allow the grout to set for 24 hrs. And do the moist curing for 5 days. The area around the

pipes shall be dressed in the 40-60 GSM geotextile in wet-on wet condition by applying

high performance elastomeric ready-to-use; liquid-applied elastomeric water based

waterproof coating. That cures to form a monolithic membrane designed for wet areas

under tiled finish application. Being a 1K liquid applied coating, it reduces mixing errors

and saves time due to excellent flow properties and thereby easy application with roller

or brush. It is fully compatible with polymer modified cement based tiles adhesives,

screeds and renders.

Digitally signed by MAYANK

(GST ALTER. DSR NDSR

S.NO REF. DESCRIPTION OF ITEMS UOM QUANTITY

& CI) /NDSR AMOUNT AMOUNT

Application of bathseal select : The concrete surface must be brought into surface

saturated dry condition (SSD). Providing and applying a self-priming coat of liquid

elastomeric waterproofing coating with 50% water dilution at of floor & walls extending 1

m height coverage at the rate 8-10 Sq.mt/ litre. Allow the primer to cure for 6 hrs. All

joints / corners / angle fillet and penetrations shall be sealed with liberal amount of the

waterproofing coating ready-to-use; liquid-applied elastomeric water based waterproof

coating. That cures to form a monolithic membrane designed for wet areas under tiled

finish application. followed by reinforcing specialised tape or 40 to 60 Gsm geo textile

fabric and min 100 mm width in between 2 coats. Apply top coats of coating by brush or

roller without dilution at the rate 3 litre/ Sq.mt in the interval of 6 hrs. While the first coat

is still wet fix 45 Gsm geo textile fabric on the angle fillets extending about 10 - 20 mm

on wall and floor, also warp it around PVC, joint fittings ensuring the perimeter of the

pipe/substrate abutment is sealed. Over the splash zone / shower wall taking the coating

up the full height and up to 1 meter height on vertical surface and on other walls and 0.3

metre on horizontal surface below threshold for complete bathroom waterproofing.

Complaint to HDB specification & AS/NZS 4858:2004 and satisfying the requirements of

AS3740:2010, Class II membrane. Product having elongation> 250% as per ASTM D

412, and Tensile strength of Min 1.5 N/mm2 as per ASTM D 412, Crack bridging ability

up to 2mm as per EN 1062 -7, Adhesion strength to concrete: 1.5 N/mm2 as per ASTM

D 4541, Resistance to water penetration conforming to DIN 1048 standards, Shore A

hardness > 55 as per ASTM D 2240, solid content (w/w) > 63%, etc. complete. Allow to

air cure coating completely for 5 days before tile installation work.

Providing & Injecting PU Foam Injection grout, single component hydrophobic

polyurethane pre- polymer & accelerator composite system which only reacts in

6 MR 16 presence of moisture or water. PU foam injection expands more than 30

times under unrestrained volume which effectively arrest moderate water leakages and

dampness. The Grout has lower viscosity of <350 cps.

Gym Area KG 120

AMOUNT (DSR+NDSR) 874111.9 11,54,182.31

TOTAL AMOUNT (DSR+NDSR) 20,28,294

TOTAL AMOUNT (DSR+NDSR) 20,28,294

Digitally signed by MAYANK

NAME OF WORK : PHASE-II RENOVATION AT SUSHMA SWARAJ INSTITUTE OF FOREIGN SERVICES (SSIFS)

MEA, BER SARAI, NEW DELHI

COST SUMMARY- HOSTEL BLOCK

S.No. DESCRIPTION OF WORKS DSR 2023 AMOUNT NDSR AMOUNT

1 SANITARY INSTALLATIONS & C.P FITTINGS 30868.00 260852.01

2 INTERNAL SOIL, WASTE & RAIN WATER DRAINAGE SYSTEM 115225.36 8175.36

3 INTERNAL WATER SUPPLY SYSTEM 48362.17 0.00

4 EXTERNAL SEWERAGE & RAIN WATER DRAINAGE SYSTEM 97881.69 0.00

DSR AMOUNT & NDSR AMOUNT 292337.21 269027.37

TOTAL (DSR AMOUNT + NDSR AMOUNT) 561364.58

Digitally signed by MAYANK

NAME OF WORK : PHASE-II RENOVATION AT SUSHMA SWARAJ INSTITUTE OF FOREIGN SERVICES (SSIFS) MEA, BER SARAI, NEW DELHI

SCHEDULE OF QUANTITIES FOR PLUMBING WORKS- HOSTEL BLOCK

INTERNAL PLUMBING WORKS

SL. NO Ref: DSR 2023 DESCRIPTION QTTY UNIT (GST ALTER. & AMOUNT

I SANITARY INSTALLATIONS & C.P FITTINGS

Providing and fixing Rimless Back-to-Wall Water Closet (WC), size 360 × 560 × 420

mm, with UF soft-close slim seat cover, SS hinges, fixing accessories, P-trap 180 mm,

complete with single-piece slim concealed cistern, heavy-duty floor mounting frame,

installation kit, "S"-type drain pipe connection set, Kubix dual flush control plate,

flush pie, all fittings, testing and commissioning, complete as per manufacturer's

specifications and as directed by the Engineer-in-Charge.

Providing and fixing Hand Shower (Health Faucet) with trigger-operated spray head,

2 MR 18 8 mm dia., 1.0 m long stainless steel flexible tube, wall hook/holder, angle valve (if 2 each 2234.78 4469.56

specified), and all necessary fittings, fixing accessories.

3 17.34 Providing and fixing toilet paper holder :

4 18.49 Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931

18.49.1 a) 15 mm nominal bore 2 each 507.91 1015.82

Providing and fixing Table Top Vitreous China Wash Basin, size 700 × 435 × 135 mm,

complete with single lever basin mixer, 32 mm dia C.P. brass waste coupling, all

fixing accessories, cutting and making good the countertop/wall wherever required,

sealing with approved sanitary-grade silicone sealant, testing and commissioning,

complete as per manufacturer's specifications and as directed by the Engineer-in-

Providing and fixing 600x450mm bevelled edge mirror of superior glass (of approved

6 17.31 quality) complete with 6mm thick hard board ground fixed to wooden cleats with 4 each 1611.47 6445.88

C.P. brass screws and washers complete.

Digitally signed by MAYANK

INTERNAL PLUMBING WORKS

SL. NO Ref: DSR 2023 DESCRIPTION QTTY UNIT (GST ALTER. & AMOUNT

Providing and fixing C.P. Brass Bottle Trap of 32 mm dia (with internal Partition) of

approved quality and make , complete with extension tube, wall flange, nuts,

7 MR 20 washers, sealing rings and all necessary fittings and accessories, including cutting 4 each 2092.33 8369.32

and making good wherever required, testing and commissioning, complete in all

respects as directed by the Engineer-in-Charge.

Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112

8 17.71 mm distance from wall of standard shape with bracket of the same materials with 4 each 168.72 674.88

snap fittings of approved quality and colour, weighing not less than 105 gms.

Providing and fixing Stainless Steel (Grade SS 304) Round Towel Ring having ring

diameter 162 mm (±5 mm), with round concealed wall flange, chrome finish,

complete with concealed stainless steel mounting bracket, stainless steel screws,

nylon wall plugs and all accessories required for proper installation.

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of

approved quality conforming to IS:8931

11 18.21 Providing and fixing unplasticised PVC connection pipe with brass unions.

18.21.2 45 cm length

18.21.2.1 15 mm nominal bore 8 each 97.96 783.68

12 MR 23 Providing and fixing wall spout with 2-way diverter of quality & make. 4 each 6971.78 27887.12

18.51.1 15 mm nominal bore 0 each 800.70

Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on

13 17.33 anodised aluminium angle frame with C.P. brass brackets and guard rail complete 4 each 1085.87 4343.48

fixed with 40 mm long screws, rawl plugs etc., complete.

Providing and fixing Single Towel Rail, 450 mm long, fabricated from SS 304 grade

14 MR 24 stainless steel with concealed wall mounting, complete with all fixing accessories, 4 each 2233.28 8933.12

screws, plugs, alignment, complete as per directed by the Engineer-in-Charge.

Digitally signed by MAYANK

INTERNAL PLUMBING WORKS

SL. NO Ref: DSR 2023 DESCRIPTION QTTY UNIT (GST ALTER. & AMOUNT

Providing and fixing overhead shower set comprising 300 × 300 mm square stainless

steel single-flow overhead shower with rubit cleaning system and 400x25x25 mm

long square shower arm with flange, complete with all accessories, fittings, testing

and commissioning, as per direction of Engineer-in-charge.

Providing and fixing Stainless Steel Floor Grating with integral cockroach trap,

16 MR 26 complete with removable grating, frame, all necessary fixing accessories, sealing, 9 each 1420.81 12787.29

complete as per directed by the Engineer-in-Charge.

Providing and fixing white vitreous china battery based infrared sensor operated

urinal of approx. size 610 x 390 x 370 mm having pre & post flushing with water (250

17 17.80 ml & 500 ml consumption), having water inlet from back side, including fixing to wall 2 each 7996.67 15993.34

with suitable brackets all as per manufacturers specification and direction of

Engineer-in-charge.

II INTERNAL SOIL, WASTE & RAIN WATER DRAINAGE SYSTEM

Providing and fixing UPVC pipes complete with fittings including cutting and making

good the walls etc.

MR 27 UPVC SWR Single socket pipe type-B 40 mm dia 12 Metre 422.95 5075.40

MR 28 UPVC SWR Single socket pipe type-B 50 mm dia 6 Metre 464.96 2789.76

Providing and fixing 110 mm dia. Floor Drain (Nahani Trap Type) with deep water

seal, all necessary fittings, jointing, cutting and making good wherever required.

20 17.35 Providing and fixing soil, waste and vent pipes:

17.35.1 100 mm diameter

17.35.1.3 Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside IS:15905 55 Metre 1171.86 64452.30

Digitally signed by MAYANK

INTERNAL PLUMBING WORKS

SL. NO Ref: DSR 2023 DESCRIPTION QTTY UNIT (GST ALTER. & AMOUNT

Providing and fixing trap of self cleansing design with screwed down or hinged

21 17.60.1.3 grating with or without vent arm complete, including cost of cutting and making

good the walls and floors :

Providing and fixing bend of required degree with access door, insertion rubber

washer 3 mm thick, bolts and nuts complete.

17.38.1 100 mm diameter

17.38.1.3 Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside IS:15905 6 each 568.44 3410.64

23 17.39 Providing and fixing plain bend of required degree.

17.39.1 100 mm diameter

17.39.1.3 Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside IS:15905 6 each 368.81 2212.86

24 17.42 Providing and fixing double equal plain junction of required degree.

17.42.1.3 Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside IS:15905 2 each 762.37 1524.74

25 17.44 Providing and fixing single equal plain junction of required degree:

17.44.1.3 Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside IS:15905 10 each 582.72 5827.20

26 17.56 Providing and fixing terminal guard :

17.56.1.3 Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15905 2 each 428.74 857.48

27 17.57A Providing and fixing shielded coupling for Hubless centrifugally cast iron pipe

17.57A.1 100 mm dia

17.57A.1.1 SS 304 grade coupling with EPDM rubber gasket 65 each 433.00 28145.00

Digitally signed by MAYANK

INTERNAL PLUMBING WORKS

SL. NO Ref: DSR 2023 DESCRIPTION QTTY UNIT (GST ALTER. & AMOUNT

Providing and fixing M.S. stays and clamps for sand cast iron/centrifugally cast (spun)

iron pipes of diameter :

III INTERNAL WATER SUPPLY SYSTEM

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal

stability for hot & cold water supply including all CPVC plain & brass threaded fittings

i/c fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes &

fittings with one step CPVC solvent cement and the cost of cutting chases and

making good the same including testiang of joints complete as per direction of

Engineer in Charge.

Concealed work including cutting chases and making good the walls etc.

18.8.1 15 mm nominal dia pipes 40 Metre 498.89 19706.16

18.8.2 20 mm nominal dia pipes 28 Metre 538.78 15085.84

18.8.3 25 mm nominal dia pipes 10 Metre 628.62 6286.20

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal

stability for hot & cold water supply, including all CPVC plain & brass threaded

30 18.7 fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing

of pipes & fittings with one step CPVC solvent cement and testing of joints complete

as per direction of Engineer in Charge.

Internal work-Exposed on wall

18.7.3 25 mm nominal dia pipes 15 Metre 402.43 6036.45

Providing and fixing gun metal gate valve with C.I. wheel of approved quality

(screwed end) :

18.17.1 25 mm nominal bore 2 each 623.76 1247.52

IV EXTERNAL SEWERAGE & RAIN WATER DRAINAGE SYSTEM

Digitally signed by MAYANK

INTERNAL PLUMBING WORKS

SL. NO Ref: DSR 2023 DESCRIPTION QTTY UNIT (GST ALTER. & AMOUNT

Excavating trenches of required width for pipes, cables etc. including excavation for

sockets and dressing of sides, ramming of bottoms, depth upto 1.5m including

getting out the excavated soil, and then returning the soil as required, in layers not

32 2.10 exceeding 20cm in depth including consolidating each deposited layer by ramming,

watering etc. and disposing of surplus excavated soil as directed, within a lead of

2.10.1 All kinds of soil

2.10.1.2 Pipes, cables etc. exceeding 80mm dia but not exceeding 300mm. 30 mtr 352.92 10587.60

Providing and laying Non pressure NP2 class (light duty) RCC pipe with collars

33 19.6 jointed with stiff mixture of cement mortar in the proportion of 1:2 (1cement : 2

fine sand ) including testing of joints etc. complete.

Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded

34 19.3 stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as

per standard design:

Providing and fixing square-mouth S.W. gully trap grade‘A’ complete with C.I.

grating, brick masonry chamber with water tight C.I. cover with frame of 300 x300

mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not

less than 2.70 kg as per standard design

19.4.2 150 x 100 mm size P type

19.4.2.2 With Sewer bricks conforming to IS : 4885 1 Nos. 2717.64 2717.64

Constructing brick masonry manhole in cement mortar 1:4 (1 cement :4 coarse sand)

RCC top slab with 1:2:4 mix (1 cement :2 coarse sand :4 graded stone aggregate

20mm nominal size), foundation concrete 1:4:8 mix (1 cement :4 coarse sand :8

graded stone aggregate 40mm nominal size) inside plastering 12mm thick with

cement mortar 1:3 (1 cement :3 coarse sand) finished with floating coat fo neat

cement and making channels in cement concrete 1:2:4 (1 cement :2 coarse sand :4

graded stone aggregate 20mm nminal size) finished with a floating coat of neat

cement complete as per standard design.

Digitally signed by MAYANK

INTERNAL PLUMBING WORKS

SL. NO Ref: DSR 2023 DESCRIPTION QTTY UNIT (GST ALTER. & AMOUNT

Inside size 90x80cms and 45cms deep including CI cover with frame (light duty)

19.7.1 455x610mm internal diamensions total weight of cover and frame to be not less

than 38 kg (weight of cover 23 kg and weight of frame 15kg).

19.7.1.1 With FPS bricks of class designation 75 (i) For Sewer Line 1 Nos. 12798.52 12798.52

37 19.8.1 Extra for depth for manholes:

Size 90x80cm with With common burnt clay FPS (non modular) bricks of class

designation 7.5

Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cement

38 19.15 concrete blocks 1:3:6 (1 cement:3 coarse sand :6graded stone aggregate 20 mm

nominal size) as per standard design

19.15.1 With 20x20 mm square bar 4 Nos. 545.89 2183.56

TOTAL FOR INTERNAL & EXTERNAL PLUMBING SYSTEMS 292337.21 269027.37

Digitally signed by MAYANK

NAME OF WORK : PHASE-II RENOVATION AT SUSHMA SWARAJ INSTITUTE OF FOREIGN SERVICES (SSIFS)

MEA, BER SARAI, NEW DELHI

COST SUMMARY- FIRE PROTECTION ITEMS- HOSTEL BLOCK

S.No. DESCRIPTION OF WORKS DSR E&M 2025 AMOUNT MR AMOUNT

I PUMPS AND FITTINGS 17589.00 1223.23

II SPRINKLERS, PIPING AND HOSE REEL 329948.00 0.00

III FIRE EXTINGUISHERS 0.00 38867.64

DSR AMOUNT & NDSR AMOUNT 347537.00 40090.87

TOTAL (DSR AMOUNT + NDSR AMOUNT) 387627.87

Digitally signed by MAYANK

NAME OF WORK : PHASE-II RENOVATION AT SUSHMA SWARAJ INSTITUTE OF FOREIGN SERVICES (SSIFS) MEA, BER SARAI, NEW DELHI

SCHEDULE OF QUANTITIES- HOSTEL BLOCK

FIRE PROTECTION WORKS

SL. No. Ref: DSR 2025 DESCRIPTION QTTY UNIT AMOUNT

I PUMPS AND FITTINGS DSR-2025 MR

Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating

1 27.11 with bronze/gunmetal seat duly ISI marked complete with nuts, bolts,

washers, gaskets conforming to IS 13095 of following sizes as required :

Providing & fixing flow switch in following sizes M.S. pipe including

connection etc as required.

Providing, installation, of bourdon type pressure gauge with 0-20kg/cm2

100 mm dial size 1 each 1223.23 1223.23

II SPRINKLERS, PIPING AND HOSE REEL

Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe

conforming to IS 1239/Class -II of IS: 3589 including Welding, fittings like

elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on

4 27.7 the wall/ceiling with suitable clamp/support frame and painting with two

or more coats of synthetic enamel paint of required shade complete as

Supplying and fixing first-aid Hose Reel with MS construction spray painted in

post office red, conforming to IS 884 complete with the following as required.

Digitally signed by MAYANK

FIRE PROTECTION WORKS

SL. No. Ref: DSR 2025 DESCRIPTION QTTY UNIT AMOUNT

20 mm nominal internal dia water hose thermoplastic (Textile reinforced)

type -2 as per IS: 12585

20 mm nominal internal dia gun metal globe valve & nozzle. Drum and

brackets for fixing the equipmets on wall.

Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and

Providing, fixing, testing & commissioning of 15mm dia quartzoid bulb type

sprinklers of rating 68 degree centigrade with required accessories:

27.21.1 Pendent Sprinkler 40 Each 599.00 23960.00

III FIRE EXTINGUISHERS

Supply of ABC (Stored Pressure type) duly ISI marked conforming to IS:

15683:2006 squeeze grip release valve, discharge pipe locking arrangement,

7 MR pressure gauge, operation manual, and bracket. Suitable for wood, paper,

cloth, plastic, diesel, petrol, paint, LPG, CNG, PNG, electrically started fire.

MR 31 Capacity 4 Kg. 4 Each 4609.17 18436.68

MR 32 Capacity 6 Kg. 4 Each 5107.74 20430.96

TOTAL FOR FIRE PROTECTION WORKS 347537.00 40090.87

Digitally signed by MAYANK

NAME OF WORK : PHASE-II RENOVATION AT SUSHMA SWARAJ INSTITUTE OF FOREIGN SERVICES (SSIFS) MEA, BER SARAI, NEW

SR. NO. TRADE DESCRIPTION DSR AMOUNT

PART - I ELECTRICAL WORKS

1 POINT & CONTROL WIRING IN PVC CONDUIT, DISTRIBUTION BOARDS

2 LIGHT FIXTURES AND FITTINGS, CEILING FANS, SENSORS ETC. 1,93,141.00 1,94,574.60

3 MEDIUM VOLTAGE PANELS 3,59,413.35

4 LT CABLES, TERMINATIONS, & CABLE TRAYS ETC. 81,401.00 2,94,382.50

5 EARTHING SYSTEM 1,62,945.00

6 SAFETY EQUIPMENTS FOR ELECTRICAL INSTALLATION 3,336.00 3,959.56

TOTAL OF ELECTRICAL WORKS 33,88,346.00 8,52,330.01

PART - II ELV SYSTEM

TOTAL OF ELV SYSTEM WORKS 2,61,108.00 34,763.70

Gross Total 45,36,547.71

Say 45.37 Lacs

Digitally signed by MAYANK

NAME OF WORK : PHASE-II RENOVATION AT SUSHMA SWARAJ INSTITUTE OF FOREIGN SERVICES (SSIFS) MEA, BER SARAI, NEW DELHI

Sr Nos Description of Item Qty Unit Amount

PART - I DSR25NS / MR ELECTRICAL WORKS

1 POINT & CONTROL WIRING IN PVC CONDUIT, DISTRIBUTION BOARDS ETC.

Please follow the GRIHA / Indian Green Building Council Norms for luminosus efficacy, lighting levels,

illumination level etc.without extra cost.

COPPER WIRING WITH MODULAR SWITCHES IN PVC CONDUIT

1.10 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper

conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular

plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single

core cable etc as required.

1.11 Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in

surface / recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and

earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.

1.12 Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in

surface/ recessed medium class PVC conduit along with 1 No 4 sq. mm FRLS PVC insulated copper conductor

single core cable for loop earthing as required. 200 Meter 334.00 66800.00

1.13 Wiring for light/ power plug with 4X4 sq. mm FRLS PVC insulated copper conductor single core cable in

surface/ recessed medium class PVC conduit along with 2 Nos 4 sq. mm FRLS PVC insulated copper

conductor single core cable for loop earthing as required. 150 Meter 537.00 80550.00

SUBMAIN AND CONTROL WIRING

1.14 Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated

copper conductor, single core cable in surface/ recessed medium class PVC conduit as required

1.14. 2 X 1.5 sq. mm + 1 X 2.5 sq. mm earth wire (For Light Ckt Wiring Points) 4680 Meter 275.00 1287000.00

1.14.2 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire (For Light Ckt Wiring Points/TV/ 6 Amp Light Plug) 1050 Meter 275.00 288750.00

1.14.4 2 X 6 sq. mm + 1 X 6 sq. mm earth wire (For Sub Main of Each Room) 200 Meter 439.00 87800.00

1.14.9 4 X 6 sq. mm + 2 X 6 sq. mm earth wire (For UPS Load & Light DB) 200 Meter 754.00 150800.00

1.14.10 4 X 10 sq. mm + 2 X 6 sq. mm earth wire (For Power DB) 200 Meter 1005.00 201000.00

1.24 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including

connections but excluding modular plate etc. as required.

1.24.4 3 pin 5/6 amp socket outlet 22 Each 197.00 4334.00

1.24.6 Telephone socket outlet 2 Each 148.00 296.00

1.23.7 TV antenna socket outlet 2 Each 148.00 296.00

1.25 Digitally

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate signed

switch by MAYANK

box including connections but excluding modular plate etc. as required. 1

Sr Nos Description of Item Qty Unit Amount

1.26 Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular

plate as required. 30 Each 40.00 1200.00

1.27 Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular

switches in recess etc as required.

1.32 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess,

including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular

switch, connection etc. as required. 15 Each 586.00 8790.00

1.55 Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point (without

independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/

recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single

core cable etc. as required.

1.19 Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded

with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC

conduit as required. 150 Meter 38.00 5700.00

1.21 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess

including cutting the wall and making good the same in case of recessed conduit as required.

Supply, Installation, Testing and Commisioning of Junction boxes for direct access to cables at the

intersection of raceways supplied completely with base and cover plates, height adjustable junction box 65-

90 mm including all accessories ss plate of 3mm thick complete in all respect as per the directions of

engineer in charge

SUB MAIN DISTRIBUTION BOARDS, DISTRIBUTION BOARDS,MCB's, RCCB's, etc.

DISTRIBUTION BOARDS,MCB's, RCCB's

2.3 Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on

surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections,

powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)- For Individual Room

Digitally signed by MAYANK

2.3.1 2 + 4 way/6 way, Double door KUMAR

Sr Nos Description of Item Qty Unit Amount

2.4 Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution

board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din

bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)-

For Distribution of various areas as per SLD

2.5 Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 volts, TPN MCB

distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 amps tinned copper

bus bar, common neutral link, earth bar, din bar for mounting MCB's (but without MCB's and incomer ) as

required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required. (Kitchen

2.10 Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable

for inductive load of following poles in the existing MCB DB complete with connections, testing and

commissioning etc. as required.

2.10.1 Single pole 2 Each 256.00 512.00

2.11 Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required. 5 Each 13.00 65.00

2.13 Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with

connections, testing and commissioning etc. as required.

TOTAL OF DSR ITEMS FOR POINT WIRING IN PVC CONDUIT, ETC. ₹ 29,47,523.00

2 LIGHT FIXTURES AND FITTINGS, CEILING FANS, SENSORS ETC.

Supplying, installation, Testing & Commissioning of LED Recessed/ surface Down lighter (Round/ square/

Rectangular) SMD type of following body material with PMMA and prismatic diffuser and construction as per

IS :10322 with driver as per the requirement with Driver efficiency >85%, Operating voltage AC 140-270 Volt,

frequency 50/60 hz, Operating temp range -15 deg to 40 deg centigrade, internal surge protection of 2.5 KV

with Short & Open circuit protection ,THD < 10% , P. F.≥0.95, IP20, CRI >80 , UGR (Unified Glare Rating) < 19,

Flicker free (flicker should be below 5%), life time (LED,Driver & electrical circuitary), of minimum 50000

Burning Hours with 70% of initial Lumen maintained till life ends ,CCT 3000°K / 4000°K / 5700°K / 6000°K /

6500°K (As per ANSI Bin), SDCM (Standard Deviation Color Matching) <3, Maximum power consumption

should not more than the specified rating and Fixture shall be confirming to relevant BIS standards and trade

mark certificate (T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing

Complete in all respect i/c connections with 1.5 sq mm FRLS, PVC insulated copper conductor single core

cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥105 and

<120 lm/Watt output . LM79 & LM80 Test report from NABL lab for all testing required for LED fixtures as

per BIS shall be submitted. Shape size

and CCT shall be as approved by Engineer-in-Charge as per requirement.

(Thermal management: heat sink of aluminum housing such that LED

Digitally signed by MAYANK

junction temperature shall not rise above 90°C) KUMAR

Sr Nos Description of Item Qty Unit Amount

Powder coated die cast /Extruded aluminum Body including trim

Supplying, installation, Testing & Commissioning of Panel light 2x2 ft., of following body material and

construction as per IS : 10322 with driver as per the requirement with Driver efficiency >85%, Operating

voltage AC 140- 270 Volt, freq 50/60 hz, Operating temp range -15 deg to 40 deg centigrade, internal surge

protection of 2.5 KV with Short & Open circuit protection, THD < 10% , P. F.≥0.95, IP20, CRI >80, UGR

(Unified Glare Rating) < 19, Flicker free, (flicker should be below 5 %), life time (LED,Driver & electrical

circuitry), of minimum 50000 Burning Hours with, 70% of initial Lumen maintained till life ends as per LM80

extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K /6000°K / 6500°K (As per ANSI Bin),

SDCM(Standard Deviation Color Matching) <3, Maximum power consumption should not more than the

specified rating and Fixture shall be of relevant BIS standard and trade mark certificate ( T.C.). Manufactures

1.6 Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. complete in all respect i/c connections

with 1.5 sq mm FRLS, PVC insulated copper conductor single core cable and earthing etc. as required with

Minimum 5 year OEM warranty. System lumen efficacy ≥105 <120 lm/Watt output . LM79 & LM80 Test

report from NABL lab for all testing required for LED fixtures as per BIS shall be submitted. Shape size and

CCT shall be as approved by Engineer-in-Charge as per requirement.(Thermal management: heat sink of

aluminum housing such that LED junction temperature shall not rise above 90°C). Powder coated die cast /

Extruded aluminium Body (Thickness

BLDC FANS & WALL FANS

Supply, Installation, Testing and Commissioning of following sweep, BEE 5 star rated, ceiling fan with Brush

Less Direct Current (BLDC) Motor, class of insulation: B, 3 Nos blades, 30 cm long down rod, 2 Nos caNospies,

shackle kit, safety rope, copper winding, Power Factor Nost less than 0.9, Service Value (CMM/W) minimum

6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS : 374- 2019), THD less than 10%, remote

2.1 DSR 2025 or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts,

washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for

230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required.

2.1.3 1200mm, service value (Minimum)-≥ 6.0 CM/Min/Watt, air delivery 210 CM/Min (Minimum) 3 Each 2381.00 7143.00

LIGHTING CONTROLS

15.2 Supplying, installation, testing and commissioning of Passive Infrared (PIR) technology based occupancy

sensor with day light dimming (lighting level shall be regulated as per availability of natural day light in an

area along with occupancy detection.) having high performance, regulating programmable type, suitable for

connected load upto 10Amp, for mounting height up to 2.8 mtr and for 5 m diameter coverage area along

with necessary fixing arrangements i/c programming at site etc. complete as required.

Digitally signed by MAYANK

Sr Nos Description of Item Qty Unit Amount

LED Circular Group Light (SMD Type) (System lumen efficacy >135 lm/Watt)

Supplying, Installation, Testing & Commissioning of LED Recessed/Surface Circular Group Light (Round) 20

Watt, SMD type with powder coated die cast/extruded aluminium body including trim, PMMA and prismatic

diffuser and construction as per IS:10322 with driver as per the requirement having driver efficiency >85%,

operating voltage AC 140–270 Volt, frequency 50/60 Hz, operating temperature range -5°C to 40°C, internal

surge protection of 2.5 kV with short circuit and open circuit protection, THD <10%, P.F. ≥0.95, IP20, CRI >80,

UGR (Unified Glare Rating) <19, flicker free (flicker should be below 5%), lifetime (LED, driver & electrical

circuitry) of minimum 50,000 burning hours with 70% of initial lumen maintained till life ends as per LM80

8.3 extrapolation IES TM-21-11 report, CCT 3000K/4000K/5700K/6500K (as per ANSI Bin), SDCM (Standard

Deviation Colour Matching) <3, maximum power consumption not more than the specified rating and fixture

shall conform to relevant BIS standards. Manufacturer's word mark/name engraved/embossed/screen

printed on housing. Complete in all respects including external connections with 1.5 sq.mm FRLS/HFFR PVC

insulated copper conductor single core cable and earthing etc. as required with minimum 5-year OEM

warranty. System lumen efficacy >135 lm/Watt output. LM79 & LM80 test reports and all testing required

for LED fixtures as per BIS shall be submitted. Shape, size and CCT shall be as approved by the Engineer-in-

Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction

temperature shall not rise above 90°C).Powder coated die cast/Extruded aluminium body including trim.

TOTAL OF LIGHT FIXTURES AND FITTINGS, CEILING FANS, EXHAUST FANS, SENSORS ETC. ₹ 1,93,141.00

NON -SCHEDULED ITEMS

Supply, Installation, Testing & Commissioning (SITC) of 4 ft suspended slim Linear LED luminaire fabricated

from extruded aluminium housing with white/black powder-coated finish, complete with high-efficiency

drop-down polycarbonate/PS diffuser, suspension kit, integral electronic driver and all accessories.

Luminaire shall be 19 W, minimum 2800 system lumens, efficacy ≥150 lm/W, SMD LEDs, CRI ≥80, PF ≥0.95,

THD ≤10%, CCT 4000K/5700K/6500K (SDCM ≤5), 50,000 burning hours @ L70B50, operating voltage

140–270 V AC, surge protection ≥3.5 kV, IP20, IK02, complete with BIS registered luminaire and driver of

same make complying with IEC 61347-2-13, IEC 62384 & IEC 61000-3-2. The luminaire manufacturer shall

have an in-house NABL accredited laboratory for LM-79, Type Test as per IS 10322, FAT and IK Test.

Contractor shall submit NABL accreditation certificate, LM-79 report from NABL accredited laboratory and

LM-80 report from LED manufacturer before supply. Complete as required.

20 W Suspended Linear fixture 4ft

Supplying, Installation, Testing & Commissioning of 300 mm sweep exhaust fan 900 rpm with

aerodynamically designed & balanced blades suitable for operation on 230 v single phase AC supply

MR 34 complete connection with 3 x 1.5 sq.mm. PVC insulated FRLS PVC sheathed copper conductor etc as

required as reqd.with all accessories as required

TOTAL FOR NON DSR ITEMS 194574.60

Digitally signed by MAYANK

3 MEDIUM VOLTAGE PANELS Date: 2026.08.13 18:11:05 IST

Sr Nos Description of Item Qty Unit Amount

Supply, Erection, Testing & Commissioning of factory fabricated, compartmentalized, floor mounted, metal

clad, dust and vermin proof, front operated, extensible LT Panel Board, fabricated from CRCA sheet steel of

minimum 2.0 mm thick for load bearing members and 1.6 mm thick for doors/covers, complete with base

frame, gland plates, detachable side covers, suitable capacity electrolytic aluminium busbars with colour

coded heat shrink sleeves mounted on non-hygroscopic SMC/DMC supports, TPN MCCBs (4 Pole, 36 kA,

thermal magnetic release), digital multifunction meters, CTs, selector switches, indicating lamps, control

wiring, terminal blocks, cable end boxes, compression glands, earthing, space heaters (if required), danger

notices, hardware and all accessories, suitable for system voltage 415 V, 50 Hz, conforming to IS/IEC 61439-1

& 2 (earlier IS 8623), complete with installation, testing and commissioning as required.

400 Amp. MCCB-1 Nos.

100 Amp.MCCB-2Nos.

63 Amp.MCB-4 Nos. (spare)

40 Amp.MCB-2 Nos. (spare)

TOTAL OF MEDIUM VOLTAGE PANELS ₹ 3,59,413.35

4 LT CABLES, TERMINATIONS, & CABLE TRAYS ETC.

7.1 Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size

direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as

7.6 Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size

in the existing masonry open duct as required.

MV CABLE JOINTING & END TERMINATION

9.1 Supplying and making end termination with brass compression gland and aluminium lugs for following size of

PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.

4.6 Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (galvanisation

thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined

with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.

4.6.1 100 mm width X 50 mm depth X 1.6 mm thickness 2 Meter 669.00 1338.00

Digitally signed by MAYANK

4.6.2 150 mm width X 50 mm depth X 1.6 mm thickness KUMAR 2 Meter 716.00 1432.00

4.6.3 200 mm width X 50 mm depth X 1.6 mm thickness 2

Sr Nos Description of Item Qty Unit Amount

4.6.4 300 mm width X 50 mm depth X 1.6 mm thickness 2 Meter 963.00 1926.00

DOUBLE WALLED CORRUGATED (DWC) HDPE PIPES:

14.16 Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend,

couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc..direct in ground

(75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and

protective covering etc., complete as required.

14.16.2 90 mm dia (OD-90 mm & ID-76 mm nominal) 30 Meter 290.00 8700.00

TOTAL OF LT CABLES, TERMINATIONS, CABLE TRAYS AND RACEWAYS, ETC. ₹ 81,401.00

Non Scheduled Items

Supply, handling, testing and commissioning of following sizes of 1.1 KV grade XLPE core insulated,

extruded PVC inner sheath, armoured / unarmoured extruded outer sheath FRLS PVC, Copper /

Aluminium conductor cables as per IS 7098 Part I ammended upto date. All complete as required and as per

final instruction as given by E.I.C / Consultants.

MR 36 4 c x16 sqmm Aluminium conductor 150 Meter 212.55 31882.50

MR 37 4 c x25 sqmm Copper conductor 150 Meter 1750.00 262500.00

Total for Non -Scheduled Items ₹ 2,94,382.50

5 EARTHING SYSTEM

Supply, installation, testing & commissioning of earthing system & associated accessories, etc.

complete all as per the instructions of E.I.C.

1) Measurements of resistance of each earth station & resistance of complete scheme of earthing

layout must be measured recorded & got approved by E.I.C.

2) Jointing of the earth strip shall be with brass nuts bolts and also with solder joints.

3) Jointing of the earth wire shall be with solder joints with tinned cable sockets

5.4 Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry

enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with

charcoal/ coke and salt as required. 5 Set 7472.00 37360.00

5.11 Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including

connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required. 100 Meter 706.00 70600.00

5.15 Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required. 200 Meter 244.00 48800.00

Providing and fixing earth bus of 1metre long 50 mm X 6 mm GI strip with 8 Nos tapping holes mounted on

insulators & enclosed in IP 42 metal enclosurewith all accessories etc. as required. 5 Nos 1237.00 6185.00

TOTAL OF EARTHING SYSTEM ₹ 1,62,945.00

6 SAFETY EQUIPMENTS FOR ELECTRICAL INSTALLATION

Digitally signed by MAYANK

Sr Nos Description of Item Qty Unit Amount

Providing and fixing MV danger notice plate of 200mm x 150mm made of mild steel, atleast 2 mm thick, and

2.21 vitreos enamelled white on both sides and with iscription in single red colour on front side as required

Supply & Erection of mild steel bucket stand suitable for 6 Nos. fire buckets,(but without bucket) including

the cost of welding and painting of complete stand will one coat of red oxide and 2 coats of approved paint

of red colour with all labour and material required to complete the job in all respect up to the entire

Satisfaction engineer in charge of the work (size 6'x4' made of GI pipe 32mm dia). 1 set 3067.00 3067.00

TOTAL OF SAFETY EQUIPMENTS FOR ELECTRICAL INSTALLATION (DSR ITEMS) ₹ 3,336.00

NON -SCHEDULED ITEMS

Supply and fixing of First Aid box as approved by St. John Ambulance Brigade / Indian red Cross conforming

MR 40 Providing pair of duly tested rubber hand gloves as per IS :340715 suitable for working on 15 kV 1 Each 2475.16 2,475.16

TOTAL FOR NON SCHEDULED ITEMS 3,959.56

1.53 Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed steel/ PVC conduit as

1.21 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess

including cutting the wall and making good the same in case of recessed conduit as required.

Providing and fixing of following sizes of PVC Flexibale Conduits suitable for various applications, halogen

free, oil and petrol resistant, flame retardant, self extiguishing, high compressive strength and good wearing

properties along with connectors complete with conduit gland & all accessories required.

Digitally signed by MAYANK

Sr Nos Description of Item Qty Unit Amount

Supplying, Installation, Testing & Commissioning of 5MP IP IR Dome Camera having 1/2.7" Progressive Scan

CMOS image sensor, 2.7 mm to 13.5 mm motorized varifocal lens, Profile S, G & T, UL, CE & FCC certified,

minimum illumination Colour 0.05 Lux @ F1.2 (AGC ON) and 0 Lux with IR ON, Quad

H.265/H.265+/H.264/H.264+ compression, shutter speed 1/5s to 1/100000s, WDR, triple streaming with

5MP @25 fps, built-in Micro SD card support up to 256 GB, Alarm 1 Input/1 Output, Audio 1 Input/1 Output,

video analytics including Customer Flow Statistics, Cross Count, Heat Map, Human & Vehicle Detection,

Pedestrian Intrusion Detection, Line Crossing Detection, Queue Length Detection and Stationary Object

Detection, in-built IR LEDs with minimum 45 m IR distance, IP66, IK10, PoE support, complete with mounting

accessories, brackets, fixing hardware, external connections, testing and commissioning, complete in all

respects as required.

40.5.2 5MP/6MP IP IR 2.7 to 4 mm ~12 to 13.5mm or better Varifocal Motorized lens Dome Camera. 6 Nos 26993.00 1,61,958.00

TOTAL OF CCTV SYSTEM DSR ITEMS ₹ 2,61,108.00

MR 41 Supply, Installation, Testing and Commissioning of Full HD 55" LED Professional Display Panel. 1 Nos 34763.70 34763.70

Total for Non DSR Items ₹ 34,763.70

Digitally signed by MAYANK

NAME OF WORK : PHASE-II RENOVATION AT SUSHMA SWARAJ INSTITUTE OF FOREIGN SERVICES (SSIFS) MEA, BER SARAI, NEW DELHI

SCHEDULE OF QUANTITIES FOR HAVC works

DSR/ NDSR NDSR DSR

S. No. Description ( HITACHI ) Unit QTY

RATE AMOUNT AMOUNT

DSR 2025 Supplying, Installation, Testing & Commissioning of Modular type Variable Refrigerant Flow/Variable

Refrigerant Volume air cooled Outdoor units suitable for cooling/heating having 100% hermetically

sealed inverter

type twin Rotary/Scroll Compressor(s), minimum two compressors (with individual separate PCB) for

above 14HP modules, microprocessor based Controller, top discharge type condensing unit(s), with R-

410-A Refrigerant or equivalent, vibration Isolators with suitable foundation etc. complete as

required. To have better efficiency condenser fan shall be capable to operate at different speed with

respect to load. The unit shall deliver the rated capacity and in confirmation as per IS 18728:2024 and

CPWD Specifications and work even at 50°C ambient temperature without tripping. The system shall

be able to deliver 100% of the rated capacity upto 39 0C. The unit shall be suitable to work on 400V

+/- 10%, 3 Phase, 50Hz AC power supply and BMS compatible. The unit shall be filled with first charge

of the refrigerant and ready for use as required. The condenser should be coated with a hydrophilic

film to prevent water accumulation on the surface of the heat exchanger, enhance water dispersion,

and reduce the risk of degradation, thereby improving overall performance and durability. The Indian

Seasonal Energy Efficiency Ratio (ISEER) of the unit shall be as per Energy Conservation and

Sustainable Building Code (ECSBC) 2024 as below and complete as per CPWD specification,

connections, inter connections etc. as required. (For capacity <40 kWr ISEER 5.4, Capacity > 40 and

<70 ISEER 5.5, Capacity > 70 ISEER 5.6 for ECSBC Building)

31.1 Outdoor Units

DSR 2025 Supplying, Installation, Testing and Commissioning of following minimum capacity 4 way Cassette

Type Indoor ceiling mounted unit equipped with synthetic washable

media pre-filter, fan section with low noise fan/dynamically balanced blower, multispeed motor,

coil section with DX Copper coil, electronic expansion valve, outer cabinet, drain pump, grill,

necessary supports, vibration Isolation, Corded remote control etc., suitable for operation on

single phase 230 V ± 10%, 50Hz AC supply, complete, as required. The Indoor units must shut down

upon receiving a singal from the BMS System/Fire Singnals. The system shall be capable to adjust

air flow as per room requirement in auto mode. The cooling capacity of indoor unit will be at air

inlet conditions of 27 0C DB and 19 0C WB temperature. (Make will be same as of Outdoor)

31.4 INDOOR UNIT

Digitally signed by MAYANK

DSR/ NDSR NDSR DSR

S. No. Description ( HITACHI ) Unit QTY

RATE AMOUNT AMOUNT

DSR 2025 Accessories

Supplying, Installation, Testing and Commissioning of

Y/T/Multi Joints. Joints shall be of same Original Equipment

Manufacturer (OEM) make as of ODUs and IDUs

31.13.2 Outdoor Multi Joint Nos 2 8098.00 16196.00

MR 42 Wireless Remote With Reciever Kit Nos 5 11298.26 56491.32

DSR/ NDSR NDSR DSR

S. No. Description UOM QTY

RATE AMOUNT AMOUNT

Supplying, Installation, testing and commissioning including vaccumiazation and Nitrogen testing

of following nominal sizes of soft/hard drawn copper refrigerant piping for VRV/VRF system,

DSR 2025 complete with fittings, with suitable adjustable ring type hanger supports, jointing/brazing

31.14 including accessories, insulated with XPLE Class-O tubular insulation/with Class-O closed cell

elastometric nitrile rubber tubular sleeves sections of 19 mm thick insulation as given below for

Suction and Liquid lines, all accessories as per specifications etc. as required :

Supply, Installation, Testing & Comissioning of Copper Refrigerant piping of appropriate size (suction

& liquid) with nitrile insulation.

31.14.1 6.4 MM6.4 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm RMT 12 256.00 3072.00

31.14.2 9.5 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm RMT 85 346.00 29410.00

31.14.3 12.7 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm RMT 13 487.00 6331.00

31.14.4 15.86 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm RMT 75 615.00 46125.00

31.14.5 19 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm RMT 23 739.00 16997.00

31.14.6 22.2 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm RMT 19 904.00 17176.00

31.14.7 25.4 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm RMT 27 1068.00 28836.00

31.14.8 28.58 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm RMT 21 1157.00 24297.00

31.14.9 31.8 mm dia (OD) (Hard drawn) with tube thickness 1.62 mm RMT 36 1222.00 43992.00

31.14.10 34.9 mm dia (OD) (Hard drawn) with tube thickness 1.62 mm RMT 14 1286.00 18004.00

31.14.11 38.1 mm dia (OD) (Hard drawn) with tube thickness 1.62 mm RMT 15 1322.00 19830.00

Digitally signed by MAYANK

DSR/ NDSR NDSR DSR

S. No. Description ( HITACHI ) Unit QTY

RATE AMOUNT AMOUNT

31.14.12 41.27 mm dia (OD) (Hard drawn) with tube thickness 1.62 mm RMT 45 1368.00 61560.00

MR 43 Control Cable between Indoor & Outdoor

a Porviding and fixing of transmission/ control wiring between indoor and outdoor(Shielded in conduit) RMT 472

MR 44 Drain Pipe

a Supply, Laying, Fixing & Testing of PVC Drain Pipe 25MM with nitrile insulation & necessary fittings. RMT 75

MR 45 Refrigerant R410A Kgs 24 2552.09 61250.16

MR 47 Cable Tray 200mm for Open Side Piping RMT 75 2276.19 170714.25

MR 48 MS Stand with vibration pads NOS 5 8966.81 44834.05

Digitally signed by MAYANK

NAME OF WORK : RENOVATION OF HOSTEL AT SUSHMA SWARAJ INSTITUTE OF FOREIGN SERVICES MEA, BER SARAI, NEW DELHI

BOQ: FURNITURE AND GYM

S.NO. REF. DESCRIPTION OF ITEM UNIT QTY RATE AMOUNT

Supplying and placing in position of Shoe Cabinet of size 645 mm (W) × 315 mm (D) × 1150 mm (H), made

of engineered wood (particle board) with laminate finish, complete with matte finish, shutters, shelves,

1 MR 49 edge banding, approved quality hardware, hinges, handles, screws, buffers and all necessary fittings and each 3 39258.70 1,17,776.10

fixtures, finished in Walnut Brown or approved equivalent shade, complete in all respects as directed by

the Engineer-in-Charge.

Supplying and placing in position of Open Shelves Storage Unit of overall size 2400 mm (W) × 300 mm (D) ×

1800 mm (H), fabricated from 18 mm thick pre-laminated particle board of approved make and shade. Top,

sides, bottom and fixed shelves shall be made of 18 mm thick pre-laminated particle board. All machine-

pressed exposed edges shall be finished with 2 mm thick PVC edge banding of matching colour and shade,

machine applied using hot-melt adhesive through an edge banding machine. The storage unit shall be of

open carcass construction with fixed shelves of 18 mm thickness. Side panels, shelves and other members

shall be assembled using wooden dowels, mini-fix connectors and suitable hardware to provide adequate

strength and rigidity. The unit shall be complete with all necessary fittings, fixtures, hardware, screws,

accessories, transportation, handling and placing in position, complete in all respects as directed by the

Engineer-in-Charge.

Supplying and placing in position of Locker with Shoe Rack of overall size 450 mm (W) × 450 mm (D) × 2100

mm (H), fabricated from 18 mm thick pre-laminated particle board of approved make and shade. Top,

sides, bottom, shelves and shutters shall be made of 18 mm thick pre-laminated particle board, while the

back panel shall be made of 12 mm thick pre-laminated particle board. All exposed edges shall be machine-

3 MR 51 finished with 2 mm thick PVC edge banding of matching colour and shade. The locker shall comprise set 9 34148.10 307332.90

openable shutters with four adjustable internal shelves and a bottom open shoe rack of 300 mm height,

complete with D-type handles, locking arrangement, concealed hinges, shelf supports, screws, fittings and

all necessary hardware. The unit shall be factory finished and complete with transportation, handling,

placing in position and fixing, complete in all respects as directed by the Engineer-in-Charge.

C GYM EQUIPMENT

Digitally signed by MAYANK

S.NO. REF. DESCRIPTION OF ITEM UNIT QTY RATE AMOUNT

Supplying, providing and placing in position of Commercial Multi Adjustable Bench (Incline/Decline/Flat

Type) suitable for gymnasium use, having adjustable backrest with incline, decline and flat positions, heavy-

duty powder-coated high-strength steel frame, minimum 250 kg load carrying capacity, premium quality

4 MR 52 high-density foam cushion with wear-resistant leather/PU upholstery, non-slip rubber feet, transport each 1 52,171.64 52171.64

wheels (if applicable), resistance ropes/bands, foldable design for easy storage, complete with all

accessories, hardware, transportation, handling and placing in position, complete in all respects as

approved by the Engineer-in-Charge.

Supplying, providing, installing, testing and commissioning of Commercial Dual Pulley Cable Machine

(Single Weight Tower Type), fabricated from heavy-duty high-strength alloy steel frame with powder-

coated finish, suitable for commercial gymnasium use, complete with minimum 80 kg precision weight

stack, dual adjustable pulleys with multiple height adjustment positions, high-strength aircraft-grade steel

8 MR 53 cables with nylon-coated finish, sealed bearing pulley system, ergonomic handles, guide rods, selector pin, EACH 1 2,16,559.93 216559.93

protective shrouds, rubber feet, all accessories and fittings, complete with assembly, installation, testing

and commissioning. The equipment shall be finished in black or approved colour and suitable for

performing multiple upper and lower body exercises. Complete in all respects as approved by the Engineer-

Supplying, providing, installing and placing in position of Commercial Squat Rack (SR-20 Type) fabricated

from heavy-duty MS steel frame with powder-coated finish, suitable for commercial gymnasium use,

complete with adjustable J-hooks, adjustable safety spotter arms, multi-level barbell height adjustment,

pull-up bar, weight plate storage pegs (where applicable), anti-slip rubber feet, all necessary fasteners,

hardware and accessories, suitable for complete body workout and free-weight training. The equipment

shall be factory assembled/factory finished, complete with transportation, handling, installation, testing

and commissioning, finished in black or approved colour, complete in all respects as approved by the

Engineer-in-Charge.

Supplying, providing, installing and placing in position of Semi-Commercial Elliptical Cross Trainer, suitable

for commercial gymnasium use, having a maximum user weight capacity of 150 kg, minimum 12 kg

precision balanced flywheel, motorized magnetic resistance system with multiple resistance levels, LCD

display indicating time, speed, distance, calories, pulse, RPM and other workout parameters, hand pulse

6 MR 55 sensors, ergonomically designed anti-slip foot pedals, heavy-duty powder-coated steel frame, smooth belt each 1 1,04,642.61 104642.61

drive system, transport wheels, adjustable levellers, emergency stop/safety features, complete with all

accessories, hardware, assembly, installation, testing and commissioning. The equipment shall be factory

finished in black or approved colour, complete in all respects as approved by the Engineer-in-Charge.

Digitally signed by MAYANK

S.NO. REF. DESCRIPTION OF ITEM UNIT QTY RATE AMOUNT

Supplying, providing, installing and placing in position of 3-in-1 Dumbbell Rack with Plate Stand and Bar

Holder, fabricated from heavy-duty MS/steel frame with durable powder-coated finish in black and yellow

colour or approved shade, suitable for commercial gymnasium use. The rack shall be designed for safe and

organized storage of dumbbells, weight plates and barbells, complete with dedicated dumbbell holding

levels, weight plate storage pegs, bar holding provisions, anti-slip rubber pads/feet, necessary hardware,

fasteners and accessories. The equipment shall be factory finished, complete with transportation, handling,

assembly, installation and placing in position, complete in all respects as approved by the Engineer-in-

Supplying, providing and placing in position of Commercial Grade Power Lifting Barbell, manufactured from

high-strength alloy steel/heavy-duty steel, suitable for professional gymnasium and power lifting

applications. The bar shall be designed for heavy load lifting with high tensile strength, precision knurling

MR 57 grip, chrome/black oxide or equivalent corrosion-resistant finish, rotating sleeves with bearing/bushing each 2 17,017.34 34034.68

system, suitable load carrying capacity for commercial use, complete with all accessories, handling,

transportation and placing in position, complete in all respects as approved by the Engineer-in-Charge.

Supplying, providing and placing in position of Commercial Grade EZ Curl Bar, manufactured from heavy-

duty alloy steel, suitable for commercial gymnasium and strength training applications. The bar shall be

designed with ergonomic curved grip positions for comfortable biceps and triceps exercises, high tensile

MR 58 strength construction, precision knurling for firm grip, corrosion-resistant chrome/black oxide finish, each 1 6,727.79 6727.79

suitable load carrying capacity for commercial use, complete with all accessories, handling, transportation

and placing in position, complete in all respects as approved by the Engineer-in-Charge.

Supplying, providing and placing in position of Commercial Grade Dumbbells, manufactured from high-

quality heavy-duty cast iron/steel core with durable rubber/neoprene/PU coating, suitable for commercial

gymnasium use. Dumbbells shall have ergonomic non-slip grip handles, uniform weight distribution,

MR 59 corrosion-resistant finish and suitable design for strength training and regular heavy-duty workouts. The KG 240 250.40 60096.00

set shall be complete with required weights as approved by the Engineer-in-Charge, including handling,

transportation and placing in position, complete in all respects.

Supplying, providing and placing in position of Commercial Grade Weight Plate Stand, fabricated from

heavy-duty MS/alloy steel frame with durable powder-coated finish, suitable for commercial gymnasium

use. The stand shall be designed for safe and organized storage of Olympic/standard weight plates,

MR 60 complete with multiple storage pegs, vertical/horizontal plate holding arrangement, anti-slip rubber EACH 1 28,649.57 28649.57

feet/base, adequate load-bearing capacity, corrosion-resistant finish, necessary hardware and accessories.

The equipment shall be complete with transportation, handling, assembly and placing in position, complete

in all respects as approved by the Engineer-in-Charge.

Digitally signed by MAYANK

S.NO. REF. DESCRIPTION OF ITEM UNIT QTY RATE AMOUNT

Supplying, providing and placing in position of Commercial Grade Bar Holder / Barbell Storage Rack,

fabricated from heavy-duty MS/alloy steel frame with durable powder-coated finish, suitable for

commercial gymnasium use. The holder shall be designed for safe and organized storage of Olympic bars,

MR 61 EZ curl bars and other gym bars, having adequate load-bearing capacity, multiple bar holding positions, anti- EACH 1 20,507.15 20507.15

slip rubber base/pads, corrosion-resistant finish, complete with all necessary hardware, fasteners,

accessories, transportation, handling and placing in position, complete in all respects as approved by the

Engineer-in-Charge

Supplying, providing and placing in position of Commercial Grade Flat Gym Bench, suitable for commercial

gymnasium use, fabricated with heavy-duty high-strength steel frame, having minimum load carrying

capacity of 290 kg. The bench shall be designed for flat position workouts, provided with high-density foam

MR 62 cushioning with premium quality leather/PU upholstery, durable wear-resistant cover, non-slip rubber feet, Each 1 23,824.28 23824.28

rigid and stable construction, powder-coated corrosion-resistant finish, complete with all necessary

hardware, accessories, transportation, handling and placing in position, complete in all respects as

approved by the Engineer-in-Charge.

Supplying, providing, installing and placing in position of CG 600 – Six In One Multi Gym Machine for

Complete Workout, suitable for commercial gymnasium use, fabricated from heavy-duty high-strength

steel frame with durable powder-coated finish. The multi-station gym equipment shall be designed for

performing multiple strength training exercises and shall include six workout stations/functions such as

MR 63 chest press, lat pulldown, leg extension/curl, butterfly/pec deck, seated row and other associated EACH 1 2,48,720.13 248720.13

exercises. The machine shall comprise of heavy-duty weight stack, adjustable seats, pulley and cable

system, guide rods, safety locks, ergonomic handles, high-density cushioned seats/backrests, protective

covers and all necessary accessories. The equipment shall be robustly constructed for continuous

commercial use, complete with transportation, assembly, installation, testing and commissioning, finished

in approved colour and design as directed by the Engineer-in-Charge

Supplying, providing and placing in position of Commercial Grade Olympic Bumper Weight Plate Set – 150

Kg, suitable for professional gymnasium and weightlifting applications. The set shall comprise premium

quality natural rubber bumper plates with stainless steel inner rings, having outer diameter of 450 mm and

inner diameter of 50.4–50.8 mm, suitable for Olympic bars. The set shall include one pair each of 5 kg, 10

kg, 15 kg, 20 kg and 25 kg plates (total weight 150 kg). The plates shall have high impact resistance,

uniform weight distribution, durable finish, corrosion-resistant stainless steel hub/ring and suitable for

repeated commercial use. The item shall be complete with transportation, handling and placing in position,

complete in all respects as approved by the Engineer-in-Charge.

Digitally signed by MAYANK

S.NO. REF. DESCRIPTION OF ITEM UNIT QTY RATE AMOUNT

Supplying, providing, installing and placing in position of Heavy Duty Commercial Fitness Chest & Shoulder

Press (Multipress) Plate Loaded Gym Machine, suitable for professional gymnasium use, fabricated from

high-strength heavy-duty steel frame with durable powder-coated finish. The machine shall be designed

for chest and shoulder muscle training and shall include plate-loaded resistance system, adjustable

commercial grade bench with incline and flat position options, ergonomic seat and backrest with high-

density cushioning, adjustable handles, safety locking mechanism, weight plate holders, non-slip foot

support and all necessary accessories. The equipment shall have a minimum load capacity of 150 kg,

suitable for continuous commercial use, complete with transportation, assembly, installation, testing and

commissioning, complete in all respects as approved by the Engineer-in-Charge.

Supplying, providing and placing in position of Commercial Grade Spin Bike (KH-158 Type), suitable for

professional gymnasium use, having ultra-sturdy heavy-duty structure with 3-piece crank system, belt

transmission drive system and 20 kg flywheel for smooth operation. The spin bike shall be provided with

large digital/computer display, fully adjustable gel seat with sweat-proof finish, 4-way adjustable handle

17 MR 66 bar, side brake system, SPD racing pedals, transport wheels for easy movement and adjustable levelers. EACH 1 1,07,658.96 107658.96

The bike shall have a maximum user weight capacity of 160 kg and overall dimensions approximately 1190

mm (L) × 530 mm (W) × 1050 mm (H). The equipment shall be complete with all accessories,

transportation, handling, assembly, installation and placing in position, complete in all respects as

approved by the Engineer-in-Charge.

Supplying, providing, installing and placing in position of Commercial Grade Motorised Treadmill (5 HP AC

Motor Type), suitable for professional gymnasium use, having 5 HP AC continuous duty motor with 10 HP

peak capacity and high heat dissipation performance for continuous operation. The treadmill shall be

provided with 24 inch × 65 inch running belt/surface, variable speed range of 0.5 to 25 km/hr, heavy-duty

frame construction, shock absorption system, digital console/display showing speed, time, distance,

18 MR 67 calories, incline and other workout parameters, safety key/emergency stop arrangement, hand grip pulse EACH 1 1,89,985.47 189985.47

sensors, side rails, transport wheels and adjustable levelers. The treadmill shall have a maximum user

weight capacity of 200 kg and overall dimensions approximately 2260 mm (L) × 970 mm (W) × 1670 mm

(H). The equipment shall be complete with transportation, handling, assembly, installation, testing and

commissioning, complete in all respects as approved by the Engineer-in-Charge.

Digitally signed by MAYANK

NAME OF WORK : PHASE-II RENOVATION AT SUSHMA SWARAJ INSTITUTE OF FOREIGN SERVICES (SSIFS) MEA, BER

SARAI, NEW DELHI

BOQ - Commercial Kitchen Hood & Ventilation System

S.NO. DESCRIPTION OF ITEMS UNIT QTY RATE NDSR AMOUNT

MR 68 Supply, Installation, Testing & Commissioning of Commercial

Kitchen Hood & Ventilation System

i Supply & Installation of 20 Gauge SS-304 Island Kitchen Hood

complete with SS baffle filters, grease collection tray, hanging

arrangement and all accessories

82" × 108" (Approx. 18 ft)

ii Supply & Installation of Hot Air Exhaust Ducting fabricated from

GSS sheet complete with flanges, supports, insulation (where

required), hangers and accessories

iii Supply, Installation, Testing & Commissioning (SITC) of Activated

Carbon Sound Proof Scrubber suitable for 14,000 CFM kitchen

exhaust air, comprising double-skin powder coated/GI housing

with acoustic insulation, activated carbon filter bed for odour

removal, washable pre-filter, centrifugal blower with dynamically

balanced impeller, TEFC motor, vibration isolators, access doors,

pressure gauges, drain arrangement, supporting frame, flexible

connections, electrical control panel, interconnecting piping/duct

connections, foundation bolts, and all accessories complete for

efficient removal of smoke, grease vapours and odour from

commercial kitchen exhaust, complete in all respects as per

manufacturer's specifications and as directed by the Engineer-in-

iv Supply & Installation of Fresh Air Ducting complete with supports,

hangers and accessories

24" × 16" (Approx. 150 ft / 200 sheets)

v Supply, Installation, Testing & Commissioning of Air Washer Unit

complete with blower, filter section, spray system, pump,

eliminator and controls

vi Supply & Laying of KEI 6 Sq.mm, 3 Core Copper Cable complete

with glands, lugs and terminations

vii Supply & Installation of L&T Three Phase Control Panel complete

with MCB, Starter, Contactor, Overload Relay and accessories

Digitally signed by MAYANK