GE(S)/M-03/2020-21

Amount

Taking down chowkats or frames exc 1.5 Sqm but not exc 4.0 Sqm with shutter (without taking off shutters from the frame), complete all as specified and directed.

Taking down chowkats or frames not exc 1.5 Sqm with shutter (without taking off shutters from the frame), complete all as specified and directed.

S&F pressed steel frame made out of MS sheet 1.25mm thick of size 125mm x 60mm for doors/windows with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc. including filling of concrete 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as in back of chowkats and including two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed.

S&F 35mm thick, 2nd class hard wood, plain framed, panelled (factory made) shutters (two panels) with lock rail and panel of 9mm thick BWP commercial ply. The size of rail and stile as per IS-1003 (Part-I) (Larger size to be provided), kiln seasoned and chemically pressure treated, fitted to chowkhats including preparation of surfaces of shutters and application of two coats of synthetic enamel paint over a coat of pink primer etc, complete all as specified and directed.

S&F 35mm thick wire guazed and skeleton shutters (2nd class hard wood), open rebated and prepared to receive wire cloth, gauze etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing wire cloth etc., sizes of members of shutters as specified in fitted to chowkats including preparation of surfaces of shutter and application of two coats of synthetic enamel paint over a coat of pink primer etc, complete all as specified and directed.

S&F box type steel windows and ventilators, comprised of tubular frame and shutters made out of 1.25mm thick MS sheet tube factory made with double side hung wire gauged shutter & glass/glazed shutter (wire cloth and glass panes shall be measured and paid saperately under respective items) with mild steel handles and steel peg stay dovetailed or welded including 2 Nos. tower bolts of 150mm size for each leaf and 10mm square bar grills at spacing as shown on drawing, welded to FI frame work including other fittings such as hinges, handles, tarred hold fasts, fixed in PCC blocks etc. complete all as shown on drg No. CEPZ/TD-354/09 sheet 1/3 to 3/3 including preparation of surfaces and apply two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed.

S&F 3mm thick sheet glass, ordinary quality in square or rectangular panes not exc 0.5 Sqm each pane with oil putty or beading, fixed to framed work, complete all as specified and directed.

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with galvanised wire staples, complete all as specified and directed.

M&L for 75mm thick PCC 1:3:6, type C-1 (using 20mm graded crushed stone aggregate) as in plinth protection, laid in panels and joints, filled with mix of bitumen and sand (1:3) by weight, finished the surface even and smooth using extra cement including demolition of damaged plinth protection / concrete paving and removal of debris out of the premises etc, complete all as specified and directed.

Taking down wooden roof trusses, coupled rafters of span exc 4.0 mtr but not exc 8.0 Mtr etc, complete all as specified and directed.

Dismantling timber scantlings 40 sqcm and over in section, in unframed work etc, complete all as specified and directed.

S&F tubular framed steel trusses (all as per pattern of existing dismantled trusses) made out of MS medium grade tube upto 60mm bore (ERW or induction butt welded) conforming to IS1161-1979 grade ST-240 Quality 'A' including welding of distance pieces, cleats and preparation of surfaces and application of two coats of synthetic enamel paint over a coat of red oxide primer on exposed surfaces etc, complete all as specified and directed.

S&F tubular purlins fixed independently made out of medium grade tube (ERW or induction butt welded) upto 40mm bore, conforming to IS-1161-1979 grade ST-240 Quality 'A' including welding of distance pieces, jointing plates and preparation of surfaces and apply of two coats of synthetic enamel paint over a coat of red oxide primer on exposed surfaces etc, complete all as specified and directed.

S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other end, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut exc 22.5cm but not exc 30cm long, 16mm dia of shank, complete all as specified and directed.

M&L for cement concrete M-25 (Design Mix) as in columns for fixing of trusses etc, complete all as specified and directed.

S&F prepainted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified including dismantling existing AC/steel sheets of any description, complete all as specified and directed.

S&F prepainted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick and 450mm width of an ecofriendly colour having tensile strength of 550 Mpa as in ridges/vally, fixed with self tapping screws including dismanling existing sheets in ridge of any description, complete all as specified and directed.

S&F False ceiling of 9.5mm thick gypsum tiles of size 600mm x 600mm laminated with PVC film on the face side & metalised polyester film on the back side with all four edges sealed with PVC film (shade either plain white or crack) fixed with 'T' grid / cross-'T' / wall angle / level clip & suspenders / hangers of 4mm dia GI wire upto1200mm length, adjusting level fixed to roof slabes/trusses complete all as specified standard galvanised sections in a grid size of 600mm x 600mm of manufacturer including taking down existing ceiling board & grid work etc of any type/pattern, complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8mm thick, area of each tile exc 0.18 sqm but not exc 0.38 sqm as in floors etc, set and jointed (joint free) in neat cement slurry and pointed in coloured cement to match the shade of tile over and including 15mm thick screed bed or bedding layers of cement mortar 1:4 including dismantling existing tiles/stone slab of any description, complete all as specified and directed.

M&L for glazed ceramic coloured tiles of size 450mm x 300mm x 7mm thick on vertical surface, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and including 10mm thick rendering in CM 1:4 and finished rough including dismantling existing wall tiles including cement mortar bedding but not backing, removing serviceable tiles from site and rubbish off the premises, complete all as specified and directed.

S&F 20mm bore mild steel drapery rod with 1mm thick PVC wood grain coating including required brackets and knobs, fixing on windows and doors for hanging curtains, complete all as specified and directed.

M&L for brick work with fly ash bricks (old size brick) straight or curved on plan exc 6 mtr mean radius built in CM 1:6 including demolition existing brick work, complete all as specified and directed.

M&L for 75mm thick PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in floors or sub base, complete all as specified and directed.

M&L for 60mm thick M-35 Grade coloured machine pressed rubber moulded precast concrete interlocking (red/yellow) paver block of any shape and size having glossy finish including demolition / dismantling of existing paver blocks, complete all as specified and directed.

M&L for sand filling under paver blocks, complete all as specified and directed.

Taking down cement plaster on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed.

M&L for 15mm thick rendering in two layers (5mm thick in CM 1:4 over 10mm thick in CM 1:6) mixed with WPC @ 200 ml/bag of cement on brick work or concrete surfaces, finished even and smooth without using extra cement, complete all as specified and directed.

M&L for 10mm thick rendering in cement mortar 1:6 on brick work or concrete surfaces, finished even and smooth without using extra cement, complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall and applying 2mm thick wall care putty and making the surface smooth and applying two coats of oil emulsion distemper over a coat of primer, complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of cement base paint over one coat of alkali resistant primer, complete all as specified and directed.

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs etc. complete all as specified and directed.

M&L for mild steel TMT bars 10mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips etc, complete all as specified and directed.

M&L for TMT bars 5mm dia and over upto and including 10mm dia as in stirrups, spacers and binders, binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips etc, complete all as specified and directed.

M&L for RCC 1:2:4, type B-1 (using 20mm graded crushed stone aggregate) as in lintel, shelves etc. including demolition of existing RCC, complete all as specified and directed.

Excavation in trenches not exc 1.5 mtr wide but not exc 1.5 mtr in depth and not exc 10 Sqm on plan for foundation etc. or for shafts, wells, cesspits, manholes, pier holes / for laying cable / pipe etc in any type of soil and getting out, complete all as specified and directed.

M&L for cement concrete 1:4:8, type D-2 (using 40mm graded crushed stone aggregates) as in foundation, filling in and mass concrete, complete all as specified and directed.

M&L for 15mm thick rendering on fair faces brick work in cement mortar 1:4, finished even and smooth without using extra cement, complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and applying three coats of white wash, complete all as specified directed by Engineer-in-Charge.

Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement including forms, moulds, mitred/stopped ends etc.

M&L for PCC 1:2:4, type B-1 (using 20mm graded crushed stone aggregate) as in coping, bedding, haunching against the side of wall of manholes and kerbs of interlocking tiles, complete all as specified and directed.

M&L for precast cement concrete 1:2:4, type B-1 (using 20mm graded crushed stone aggregate) set in CM 1:6 as in cover slabs (for manholes etc) with plain fair faces including demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for, complete all as specified and directed.

Removal of excavated material (soil) to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 mtr above the starting point, complete all as specified and directed.

Returning, filling in, leveling, watering and well ramming in layers not exc 25cm thick, complete all as specified and directed.

Demolition of cement concrete and paving not exc 15cm thick as in floors and similar work, complete all as specified and directed.

M&L for hardcore of gauge not exc 63mm, deposited, spread and levelled in layers not exc 15cm thick, watered and rammed to a true surface, complete all as specified and directed.

M&L for cement concrete 1:3:6, type C-2 (using 40mm graded crushed aggregate) as in foundation, filling in and mass concrete, complete all as specified and directed.

M&L for brick work with fly ash bricks (old size brick), straight or curved on plan exc 6 mtr mean radius built in cement mortar 1:4, complete all as specified and directed.

Formwork to sides of concrete foundation, footing, bases of colomns, rafts and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work, vertical or to better, complete all as specified and as directed.

M&L for RCC M-25 (Design Mix) as in foundation, rafts, footing, foundation beams, plinth beams, bases of columns etc, basement slabs, under reamed piles and mass concrete, complete all as specified and directed.

Formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses finishing even and fair etc, complete all as specified and as directed.

M&L for RCC M-25 (Design Mix) as in walls, retaining walls, basement walls, ballast walls and the like, any thickness above top of footing including attached pilasters and buttresses, complete all as specified and as directed.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, not exceeding 200mm thick (Horizontal or sloping), finished even and fair, complete all as specified and directed.

M&L for RCC M-25 (Design Mix) as in slabs supported on walls, landing, balconies, canopies, deck slab and in shelves and the like, complete all as specified and directed.

M&L for brick work with subclass ‘B’ bricks, straight or curved on plan exc 6 mtr mean radius built in cement mortar 1:6, complete all as specified and directed.

M&L for brick work with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4, complete all as specified and directed.

M&L for 20mm thick screed bed or bedding layer for laying floors finishes in CM 1:6, complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8mm thick, area of each tile exc. 0.11 Sqm but not exc 0.18 Sqm as in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tile, complete all as specified and directed.

M&L for 10mm thick rendering in CM 1:4 on brick work or concrete surfaces as in backing coat for dado, complete all as specified and directed.

M&L for glazed coloured ceramic tiles of size 300mm x 450mm x 7mm thick on vertical surfaces, set and jointed in neat cement slurry and pointed in colour cement to match the shade of tile, complete all as specified and directed.

M&L for 5mm thick rendering in cement mortar 1:3 on ceiling, finished even and smooth without using extra, complete all as specified and directed.

M&L for 5mm thick rendering in cement mortar 1:3 on top of roof, mixing with WPC, finished even and smooth without using extra cement, complete all as specified and directed.

M&L for preparation of newly plastered surfaces of ceiling and applying three coats of white wash, complete all as specified and directed by Engineer-in-Charge.

Formwork to edges of concrete fair finished surfaces such as flats, treads, breaks in floors, window cills, horizontal or sloping and similar work exc 10cm but not exc 20cm wide, complete all as specified and directed.

S&F aluminium ventilator shutters, top hung or sliding type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No.), hinges 100mm long (2 Nos), suitable handle (as required), complete all as specified and directed.

S&F 3mm thick figured glass, pin head type and glazing with oil putty in squares not exc 0.50 Sqm in each pane, complete all as specified and directed.

S&F solid PVC door frame of size 50mm x 47mm, made out of 5mm thick plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S&F 200mm long aluminium anodised, barrel tower bolts of extruded section.

S&F 150mm long extruded aluminium alloy handles, fabricated type, anodised.

S&F 100mm long butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised.

S&F 300mm long aluminium alloy, anodised, sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy.

S&F vitreous china wash basin, white, flat back of size 550mm x 400mm including waste pipe, brackets and cutting for and pinning in ends of brackets or errecting stand and including 32mm dia PVC waste pipe and waste copling 32mm size full thread, complete all as specified and directed.

S&F 15mm bore pillar tap, cast copper alloy, fancy type with capstan heads, chromium plated, screwed down high pressure, with long screwed shanks and fly-nuts, screwed for iron pipe and fixed.

S&F 15mm bore bib tap, cast copper alloy, ISI marked with crutch or butter fly handle, fancy type, chromium plated, screwed down screwed for iron pipe and fixed.

S&F stop valve / angle valve, cast copper alloy (ISI Marked), chromium plated, screwed down high pressure with capstan head screwed both ends for iron pipe 15mm bore, complete all as specified and directed.

S&F vitreous china wash down water closet pan (pedestal pattern), white, complete including fixing to trap Including PVC seat cover and hinging device, complete all as specified and directed.

S&F PVC flushing cistern 10 Ltr capacity including PVC connection inlet and outlet connections, brackets, PVC flush pipe with bend 32mm dia of suitable length including making necessary connections to water supply pipe line and jointing to WC, complete all as specified and directed.

S&F PVC flexible waste pipe, 32mm dia suitable for WHB / sinks, including threaded PVC socket suitable for shank of waste coupling.

S&F Vitreous china bowl urinal, flat back of size 465mm x 355mm x 265mm, white with grating and union for discharge pipe (excluding flush pipe and waste pipe) complete including provding and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, complete all as specified and directed.

S&F PVC connections of 15mm size with PTMT nuts of length 450mm, complete all as specified and directed.

S&F sheet glass shelf assembly consisting of 5.5mm thick sheet glass (cutting in any shape) fixing with chromium plated brackets guard, complete all as specified.

S&F stainless steel Grating doom 100mm dia, fixed in floors.

S&F stainless steel Grating doom 100mm dia with waste hole, fixed in floors.

S&F CP towel rail, 20mm dia, 'D' type, 60cm long between flanges, complete all as specified and directed.

S&F 15mm bore GI tubes, medium grade, galvanised with all fitting and fixed to walls and ceilings or laid in floors, complete all as specified and directed.

S&F 20mm bore GI tubes, medium grade, galvanised with all fitting and fixed to walls and ceilings or laid in floors, complete all as specified and directed.

Cutting 15/20/25mm bore existing steel tubing for alterations or additions (Each cut measured) in position without taking down.

S&F 20mm bore gun-metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed.

S&F cast iron floor trap 100mm size with grating including jointing to waste pipe, fixed in cement concrete 1:2:4 type B-1, complete all as specified and directed.

S&F cast iron gully/nahani trap 100mm size with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B-1, complete all as specified and directed.

S&F 100mm bore Cl soil pipe (sand cast) in any length with ears fixed with cement joints, laid in trenches or in floors, complete all as specified and directed.

S&F 75mm bore Cl waste pipe (sand cast) in any length with ears, fixed with cement joints, laid in trenches or in floors, complete all as specified and directed.

S&F Cl bends (any radius) for soil pipes 100mm bore diminishing pieces or tapers on walls with oval access doors, complete all as specified and directed.

S&F Cl bends (any radius) for soil pipes 100mm bore diminishing pieces or tapers on walls, complete all as specified and directed.

S&F Cl bends (any radius) for waste pipes 75mm bore diminishing pieces or tapers on walls, complete all as specified and directed.

S&F 100mm bore cast iron cowl.

S&F rotational moulded polyethlene water storage tank of capacity 500 litres, three layered (cylindrical vertical with closed top), hoisted and fixed in position including 20mm dia PVC ball valve high pressure with polythene float, complete all as specified & directed.

M&L for concrete bed to drain pipes including packing under and haunching against the sides of pipe after they are laid and tested in cement concrete M-10 (Nominal mix) using 40mm graded crushed stone aggregate for 150mm bore pipe, complete all as specified & directed.

Supply and Laying 150mm bore salt glazed stone ware (SGSW) pipe, grade 'A', jointed, laid on concrete bed including necessary fitting including testing after laid, complete all as specified and directed.

Cutting holes into or through brick walls built in cement mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l as required, depth not exc 150 Sqcm in area, complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of new plastered surface of walls and applying two coats of oil emulsion distemper over a coat of primer, complete all as specified & directed.

S&F sink with drainage board made of stainless steel 1mm thick, fixed with plugs, washers including PVC waste pipe, waste coupling including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting to union pipe, overall size 915mm x 460mm, bowl size 410mm x 330mm x 160mm, complete all as specified & directed.

M&L for cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc. and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting not exc 10cm girth, complete all as specified & directed.

M&L for brick work with fly ash bricks, straight or curved on plan exc 6 mtr mean radius built in cement mortar 1:6, complete all as specified and directed.

M&L for 75mm thick PCC 1:3:6 type C-1 (using 20mm graded crushed stone aggregates) as in sub base of floor, complete all as specified and directed.

M&L for 40mm thick cement concrete 1:2:4, type B-1 (using 20mm graded crushed stone aggregate) as in flooring, finished even and smooth using extra cement including making necessary grooves, complete all as specified and directed.

Surface excavation not exc 30cm deep and averaging 15cm deep and getting out in soft/loose soil, complete all as specified and directed.

M&L for 80mm thick coloured machine pressed rubber moulded precast concrete interlocking (red/yellow) paver block of any shape and size having glossy finish, M-40, complete all as specified and directed by Engineer-in-Charge.

S&F framed work such as grills, gratings etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe-290 Gde-E-165 including two coats of synthetic enamel paint over a coat of red oxide primer after preparation, complete all as specified and directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc, complete all as specified and directed.

M&L for preparation of old plaster surfaces of walls and applying one coat of oil bound distemper, complete all as specified and directed by Engineer-in-Charge.

Taking down carefully aluminium / copper point wiring (light, fan, socket or power) complete including fixtures and fittings such as switches, ceiling roses, pendent, regulators, sockets, bell push, bell, light fittings etc. removing serviceable materials to store for keeping in safe custody for reuse at site or for taking credit (Credit shall be made as per Schedule of credit), removing rubbish from the site and making good all disturbed surfaces of walls, floors etc. to match with existing surfaces, complete all as specified and directed by Engineer-in-Charge.

M&L for modular point wiring one light/fan/bell point controlled by one switch complete with 1.5 Sqmm multistranded FR PVC insulated unsheathed fire retardent copper conductor cable 1100 volts grade in and including non metallic rigid PVC heavy duty concealed conduit with wall thickness not less than 1.8mm including conduit accessories like bends, tees junction boxes etc fixed concealed/recessed in wall or ceiling etc including 1.5 Sqmm single core FR PVC green insulated unsheathed multi stranded copper conductor 1100 Volts grade as earth continuity wire connected to earth dolly including inner and outer frame plate matching with surrouding with modular sunken steel boxes zinc oxide plated of suitable size including modular sheets of suitable module and back plates etc. complete all as specified and directed by Engineer-in-Charge.

All as per srl item No. 114.00 above but for 5 pin 5 Amps socket outlet on independent board controlled by one switch 5 Amps one way, complete all as specified and directed.

All as per srl item No. 114.00 above but for 2/3 pin 5 Amps socket outlet on same board controlled by one switch 5 Amps one way, complete all as specified and directed.

All as per srl item No. 114.00 above but for 15 Amps socket outlets point using 2.5 Sqmm FR PVC insulated multistranded copper conductor cable including 2.5 Sqmm FR PVC insulated unsheathed multistranded copper conductor cable as earth wire.

S&F modular socket outlet 6 Amp, 2/3 pin mutipurpose, 2 module complete all as specified and directed.

S&F modular socket outlet 5/15 Amp, 2/3 pin multi purpose, 2 module, complete all as specified and directed.

S&F modular switch 1 way 6 Amp, 1 module, complete all as specified and directed.

S&F modular switch 1 way 16 Amp, 1 module, complete all as specified and directed.

S&F lamp holder insulated body with back plate for batten fittings with polycarbonate body, complete all as specified and directed.

S&F ceiling rose surface bakelite 2 to 3 terminals 230 Volts AC with polycarbonate body, complete all as specified and directed.

S&F modular fan step regulator, step type suitable for 1200/1400mm sweep ceiling fan, hum free, 120W, 2 module, hum free and connecting electrically, complete all as specified and directed.

M&L for submain wiring with two single core FR PVC insulated cable 2x6 sqmm (nominal dia) copper conductor (multistrand) and drawing in and including PVC concealed conduit pipe, ISI marked including 1x6 sqmm multistranded copper conductor FR PVC green insulated unsheathed cable for earth continuity including taking down old unsv cable, complete all as specified and directed by Engineer-in-Charge.

S&F in replacement surface mounted 1x20 Watt LED tube light fittings (4 feet long), prewired, decorative luminaire with inbuilt LED tube rod and acrylic cover with all accessories and making connection using 3 core, 0.50 sqmm PVC insulated and overall sheathed flexible copper conductor cable from ceiling rose/PVC connector to light fitting and testing etc, complete all as specified and directed. Note :- CA number shall be written on each fitting before installation.

S&F in replacement surface mounted 1x10 Watt LED tube light fittings (2 feet long), prewired, decorative luminaire with inbuilt LED tube rod and acrylic cover with all accessories and making connection using 3 core, 0.50 sqmm PVC insulated and overall sheathed flexible copper conductor cable from ceiling rose/PVC connector to light fitting and testing etc, complete all as specified and directed. Note :- CA number shall be written on each fitting before installation.

S&F in replacement air bulk head 10 Watt LED light fitting IP-43 in engineering plastic housing with clear primatic diffuser complete with all acessories, connecting electricaly to ceiling rose using cord flexible 3 core PVC insulated over all sheathed with flexible copper conductor of size 0.75 sqmm as required, complete all as specified and directed.

S&F in replacement of sheet metal enclosure MCB distribution board, double door, single pole & neutral 240 volts 08 way with IP-43 IK-09 protection complete with appropriate size bus bar and neutral link, fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification, complete all as specified and directed by Engineer-in-Charge.

S&F in replacement of sheet metal enclosure MCB distribution board, double door, single pole & neutral 240 volts 02 way with IP-43 IK-09 protection complete with appropriate size bus bar and neutral link, fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification, complete all as specified and directed by Engineer-in-Charge.

S&F in replacement of MCB SP 6-32 Amps, 240 volts, 50 Hz, 10 KA repturing capacity, 'C' curve, complete all as specified and directed.

S&F in replacement of MCB SPN 6-32 Amps, repturing capacity 10 KA, 'B' curve, 240 volts, 50 Hz, complete all as specified and directed.

M&L for earthing complete with galvanised iron earth plate electrode of size 600mm x 600mm x 6mm, burried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of earth plate not less than 1.5 mtr below normal ground level, connected to galvanised earth lead wire 4mm dia by means of welding including earth work in any type of soil, charcoal dust and salt layers 15cm thick all around the earth plate as shown in electrical plate No. 3 of SSR Part I (2009) including 20mm bore GI watering pipe 'medium grade' with funnel and wire mesh, GI protection piple 'light grade' 15mm dia from earth pit to main board including PCC pit in PCC 1:3:6 type C-2 (using 20mm graded stone aggregate), angle iron frame of size 40mm x 40mm x 3mm with hold fast embeded in PCC, RCC pit cover with suitable handle, complete all as specified and directed by Engineer-in-Charge. Notes :- (i) Returning filling in only vegetable soil. (ii) Earting pit should not be shink down.

Taking down fan, sealing cable end, dismantling blades and removing fan and blades and re-fix the same after repair including testing, complete all as specified and directed by Engineer-in-Charge.

S&F LED Lamp 12 Watt.

Supply and laying in trenches/on wall/on pole/in duct/through protection pipe, XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables heavy duty LT cable, 1100 volts grade with aluminium conductor cross sectional area 16 Sqmm 2 core including retrieving/taking out/taking down old unserviceable cable from duct/trenches/pipes/pole/wall etc. including brick cover and protection pipe and disconnecting the connections. Note :- Excavation and earth work, sand cushioning, brick cover and protection pipe etc. shall be measured and paid for separately.

Supply and laying in trenches/on wall/on pole/in duct/through protection pipe, XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables heavy duty LT cable, 1100 volts grade with aluminium conductor cross sectional area 10 Sqmm 2 core including retrieving/taking out/taking down old unserviceable cable from duct/trenches/pipes/pole/wall etc. including brick cover and protection pipe and disconnecting the connections. Note :- Excavation and earth work, sand cushioning, brick cover and protection pipe etc. shall be measured and paid for separately.

M&L for galvanised steel tubing, light grade, for protection of cable, laid in trenches/road crossing/floor or fixed to pole/wall with all fittings, of size 40 mm bore.

M&L for sand cushioning to underground cable 8cm below the cable and 15cm above the cable, complete all as specified and directed.

M&L for brick protection with sub class 'B' old size brick well burnt laid flat for cable protection abutting each other laid dry with width equal to length of brick, complete all as specified and directed.

S&F exhaust / ventilating fan, made out of high quality engineering plastic, resistant to colour change with anti static properties, 300mm sweep suitable to work on 230 volts 50 Hz AC including connecting to ceiling rose, complete all as specified and directed by Engineer-in-Charge.

M/s Ashoka Brothers

M/S CANTILEVER ENGINEERS

Ravinder Singh

WALIA ENTERPRISES