Estimate for modernization and renovation of X-regulator at RD 332000 of Abohar Branch gates for installation of SCADA system.

Amount

Bevel gear box proposed at handle input shaft with ratio 1:1, straight/spiral bevel

Supply of 1.1 KW (1.47 HP ) motor including EM Brake integral with with gearbox assembly mounted with torque of 91 Nm at 112 rpm at gearbox output shaft.

Plumber block as per list and make SKF, NBC.

Providing & fixing Bearing, complete in all respects.

Providing and fixing Flexible coupling

Providing and fixing Dog clutch

Supply and installation of VFD (Variable frequency drive)

Removing damaged old rubber seal bulb or flat including clamp plate of all sizes and types.

Providing Hollow Bulb Seal and fixing in position including preparation of suface complete in all respects and to entire satisfaction of Engineer-in-charge (100/44).

Providing and Fixing in Position of flat/wedge seal including preparion of surface complete in all respects and to entire satisfaction of Engineer-in-charge size 80x12mm.

Providing & Fixing MS Flats (60x10) complete in all respect and to entire satisfaction of engineer in-charge.

Providing & Fixing MS Flats (30x12) complete in all respect and to entire satisfaction of engineer in-charge.

Providing & Fixing MS Flats (70x10) complete in all respect and to entire satisfaction of engineer in-charge.

Providing of roller pin, main shaft, handle shaft, tie rod etc in position i/c machining, finishing and annealing treatement of steel complete in all respect and to entire satisfaction of engineer in-charge.

Commissioning and testing of Gates at site complete in all repects and to entire satisfaction of engineer-in-charge per gate

Drilling/Boring hole including rimming complete in all respects and to entire satisfaction of Engineer-in-charge

Crane Charges for dismantling , loading/ unloading and refitting of gates at site (35 T)

Steel work fixed independently without connecting plates including cutting hoisting and fixing in position for Tees angles & channels

Fillet welding with high strength steel rods complete in all repects and to entire satisfaction of engineer-in-charge

Providing & Fixing of 10 gauge welded mesh of 25mm x 25mm size fixed on steel glazing with MS flat 20mm x 6mm beeding complete in all respect including painting two coats with Synthetic Enamel Paint and Priming Coat

Corrugated G.I. Sheet roofing 0.80 mm thick fixed with galvanized iron J or L hooks 10mm dia, G.I. Limpot and bitumen washers complete excluding the cost of purling rafters and trusses

Providing and Fixing Galvanized Nut and Bolts of all Sizes and length required and to entire satisfaction of Engineer-in-charge.

Cutting and straightening charges complete in all repects and to entire satisfaction of engineer-in-charge

Applying priming coat with metal primer on new steel or iron work including preparation of surface.

Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade.

Supply of Butt Hinges (Anodized Aluminium mat finish)

Supply of Sliding door bolts (Anodized Aluminium mat finish)

Supply of Tower bolts Barrel type (Anodized Aluminium mat finish)

Steel work fixed independently without connecting plates including cutting hoisting and fixing in position for Tees angles & channels

Providing chequred plate 6mm thickness of desired shape and size complete in all respect and to entire satisfaction of engineer in-charge.

Cutting and straightening charges complete in all repects and to entire satisfaction of engineer-in-charge

Supply of MS Plate of variable thicknedd as required.

Providing and Fixing Galvanized Nut and Bolts of all Sizes and length required and to entire satisfaction of Engineer-in-charge.

Fillet welding with high strength steel rods complete in all repects and to entire satisfaction of engineer-in-charge. 6mm fillet weld.

Applying priming coat with metal primer on new steel or iron work including preparation of surface.

Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade.

Miscellaneous minor repairs of Items such as M.S Flats, ISA, ISMC, ISMB etc. to make gates operational including labour charges.

Excavation of Soil using Hyraulic Excavator and hydraulic Tractor Trolly I/C cutting and loading in Trolly and transporting to the embankment locations with all lifts and leads. (Lead 4.8 Km pucca).

Earth work in excavation in foundations, trenches.

Extra for laying earthwork as per specifications for compaction in 20 cm layer and dressing including cost of rolling and watering as per specifications

Cement concrete 1:4:8 with stone ballast 40mm gauge.

First class burnt brick work laid in cement sand mortar 1:6 in foundation and plinth.

Extra for bitumen painting @0.69 kg per sqm

First class burnt brick work laid in cement sand mortar 1:6 in first storey upto 4 metres above plinth level.

Bearing Plaster of 10 mm thick cement mortar 1:3 cement sand finished with a floating coat of neat cement and thick coat of Lime wash / P.O.P. on top of walls when dry for bearing of R.C.C. slabs & beams.

Centring and shuttering for sides and soffits of beam, beams launchings girders bressumers, lintels.

Centring and shuttering for flat surfaces such as suspended floors, roofs, landings, chajjas, shelves etc.

Reinforced cement concrete M-20 mechenically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in superstructure.

Cold twisted deformed (Ribbed/Tor Steel Bar) Bars Fe 500 grade as per IS 1786-2008 for R.C.C. works, where not including in the complete rate of R.C.C. including bending and placing in position complete in all respect.

12.5 mm thick cement plaster 1:4

20mm thick cement plaster 1:5 in two coat work

Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two coats to get required finish

Distempering with Acrylic washable oil bound distemper (of approved manufacture) two coats over one priming coat to give an even shade.

Applying priming coat with cement primer in all shade on newly plastered or concrete exterior surface

Finishing walls with acrylic smooth exterior paint of required shade with two coats applied @ 1.67 litre/10sqm over and including base coat of water proofing Cement Paint applied @ 2.20 Kg/10 sqm

Terracing consiting of tiles 22.86x11.43x3.83cm laid over 25 mm mud plaster 7.5 cm mud filling on another laver of 25mm mud plaster including two coats of bitumen laid hot at 1.65 Kg/sqm top of RCC slab including grouting with cement sand mortar 1:4 and top surface to be left clean after wire brushing etc.

Top khurra 0.6m x 0.6m for rain water pipe in 25mm thick cement concrete 1:2:4 over 50mm thick cement concrete 1:8:16.

Bottom Khurra on ground 1.2m x 0.6m consisting of brick on-edge laid in cement mortar 1:3 over 75mm cement concrete 1:8:16 including 12.5mm thick cement plaster 1:3.

Embedding 100mm dia CI rain water non pressure ISI mark pipe in cement mortar during masonry work.

Providing and fixing cast iron shoe for rain water pipe on wooden plugs fixed on wall face including filling the joints with spun yarn and cement mortar 1:2.

Base course of floor consisting of 100mm thick cement concrete 1:8:16 with stone aggregate 40mm gauge and 100mm sand filling using mechanical mixer for mixing of material.

Providing and laying vitrified floor tiles of different sizes in light colour shades made using Double Charge technology (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete. Size 600x600 mm

Supply & Fixing of pressed steel frames (Chowkats) consisting of 18 gauge (1.25mm) thick steel sheet of the specified section(standard design latest) including iron lugs (hold fasts) iron hinges, confirming to P.W.D. specifications including bolts for fixing stops, lock- notch provision for receiving tower bolts, Hydraulic spring and finished with one priming coat of approved quality, fixed in position, including the cost of cement concrete 1:3:6 for filling in the frame and cement concrete 1:2:4 for lugs complete. Doors and windows frame of size 113mm x 60mm with 35 mm wide single rebate weighing 3.38 kg per meter

Factory manufactured solid flush door fixed in position iron hinges, etc (excluding the cost of any fittings other than specified above but including labour for fixing the same in position. Commercial with elm or gurjan facing on both \ Sides with laminated core and lipped edges:- 35 mm thick

Providing and fixing aluminum sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : 300mm x 16mm

Cost of aluminum fittings complete for doors, windows such as tower bolts, handles,Stoppers and screw etc. for these fittings (Excluding sliding bolt). For shutter area above 0.50 sqm

Preparation of plywood surface for painting including sand papering the surface and applying filling with approved quality fillers consisting of white lead, linseed oil, Varnish, and Chalk Mitti including finishing the surface to required finish complete.

Applying pink primer or aluminum priming coat on wood work including preparation of surface knotting and stopping etc.

Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade.

Wrought iron & Mild steel ladders, framed grills, gratings etc. with ends of bars riveted or molded forged framed window guards, barred iron doors stair case iron railing etc. including cost of bolt and nuts, screws, welding rod complete fixing in position

Supplying and fixing glass panes with glazing clips and special metal sash putty of approved make. Glass panes 4mm or 10.75 kg / sqm exceeding 0.4 sqm of area

Extra for providing & fixing Steel beading of approved shape steel tube beading size 12mm X 12mm, 18 gauge of approved shape and section with screw for fixing of glass panes instead of glazing clips and metal slash putty in steel doors , windows & Ventilators complete in all respect

Providing and fixing helical door spring 150mm (superior quality) including necessary screws, complete with Iron helical spring

Wiring fan point with sheet metal fan box in PVC insulated copper conductor single core FLRS cable (I.S.I. marked) overall 1.5 sqmm 1100 volts Grade with Regulator complete

Wiring Light point in PVC insulated copper conductor single core FLRS cable (I.S.I. marked) overall 1.5 sqmm 1100 volts Grade complete

Wiring 3 Pin 6 Amp. Wall socket point in PVC insulated copper conductor single core FLRS cable (I.S.I. marked) overall 1.5 sqmm 1100 volts Grade complete

Wiring 3 Pin 16/20 Amp. power plug control point in PVC insulated copper conductor single core FLRS cable (I.S.I. marked) overall 1.5 sqmm 1100 volts Grade complete

Supply & erection of PVC Conduit Pipes (ISI marked) as per IS9537:Part-III & HDPE pipes (ISI marked) as per IS:4984:1995 for wiring purposes including bends, junction boxes, Steel hooks, M.S. saddle clamps and other petty materials etc., as per PWD General Specifications:- Heavy Gauge PVC Conduit Pipe 25mm dia. (Flushed)

Supply and erection of Ceiling Rose (Flush Piano type) switches, sockets and other accessories (flush piano type/ modular accessories) in the existing bakelite/ modular cover frame including fixing & connections and petty material etc.

Supply and erection of Bakelite Batten Holder (Large size) switches, sockets and other accessories (flush piano type/ modular accessories) in the existing bakelite/ modular cover frame including fixing & connections and petty material etc.

Supply and erection of 3 Pin Plug Top 6Amp. (ISI marked) (flush piano type/ modular accessories) in the existing bakelite/ modular cover frame including fixing & connections and petty material etc.

Supply and erection of 3 Pin Plug Top 16Amp. (ISI marked) (flush piano type/ modular accessories) in the existing bakelite/ modular cover frame including fixing & connections and petty material etc.

Supply and erection of Step type Fan Regulator Flush Piano type (Socket size) (flush piano type/ modular accessories) in the existing bakelite/ modular cover frame including fixing & connections and petty material etc.

Supply and erection of 6/10amp. One Way Modular Switch (One Module) (Socket size) (flush piano type/ modular accessories) in the existing bakelite/ modular cover frame including fixing & connections and petty material etc.

Supply and erection of Concealed Metal Boxes of various sizes (1/2M, 3M, 4M, 6M, 8M, 12M, 16/18M) with brass lugs recessed in wall for mounting modular accessories including fixing and other petty material etc., including the cost of cutting and filling up of chases (with finishing the surface):- Powder Coated Concealed Metal Box with Brass Lugs Twelve Module

Supply and erection of Modular Cover Frame (Complete set) on the existing metal box including fixing and connection of existing switches and sockets and other petty material etc:- Modular Cover Frame Twelve Module

Supply and erection of Concealed Metal Boxes of various sizes (1/2M, 3M, 4M, 6M, 8M, 12M, 16/18M) with brass lugs recessed in wall for mounting modular accessories including fixing and other petty material etc., including the cost of cutting and filling up of chases (with finishing the surface):- Powder Coated Concealed Metal Box with Brass Lugs Eight Module

Supply and erection of Modular Cover Frame (Complete set) on the existing metal box including fixing and connection of existing switches and sockets and other petty material etc:- Modular Cover Frame Eight Module

Providing led light of reputed company with minimum 2 year warrenty. (12 W)

Providing ceiling fan 1200 mm.

Providing exhaust fan. 300 mm

Led Flood Light 30 Watt

Supply, laying and erection of aluminium conductor XLPE insulated PVC sheathed Un-armoured and served cable 1100 volts grade as per IS 7098 (Part-1)1988 to be laid loose in the existing trench or pipe as per PWD General Specifications:- Overall size 25sq.mm (4Core) unarmoured (Loose)

Supply and erection of heavy duty aluminium thimbles/lugs for cable end termination duly crimped including making necessary connections completely:- Aluminium thimble cable Core size 25 -35sq.mm

Supply and erection of 3-Stepped steel tubular swaged and welded pole (410-SP- Mpa) of Overall length 7 metre, with planting depth 1.25 metre, length of sections 4 metre, 1.5 metre and 1.5 metre (Bottom, Middle and Top respectively), Outer dia and thickness of sections 114.3mm x 4.5mm, 88.9mm x 4.05mm and 76.1mm x 3.25mm (Bottom, Middle and Top respectively) with approximate weight 73 kg. (410 SP-2) and base Plate weight 7.5 kg. of size 12mm thick about 30 cm dia.

Supply & Erection of indoor type MCCB enclosure of suitable size having provision for MCCB with extended rotary handle. MS Sheet Enclosure having provision for MCCB 40-160Amp.with extended rotary handle (Approx. Size 500mm x 300mm x 200mm)

Supply and erection of Moulded Case Circuit Breaker (Panel mounting Cubical type) in the existing Cubical Panel (confirm to IEC:60947-2) having Ics=100% Icu, 100% neutral with spreader links and relevant PWD general specifications complete with G.I. Bolts, Nuts & Connection on both sides of MCCB with suitable size of thimbles etc:- MCCB Four Pole 40amp., 415volts, =25kA Fixed Magnetic and Adjustable Thermal Setting.

Supply and erection of sheet metal Double Door Distribution Boards IP 43- IK09 metal door (dust protected) as per IS 8623-1&3, IEC 61439-1&3 suitable for TP&N Horizontal Double Door Distribution Board 4 way each

Supply and erection of Miniature Circuit Breaker MCB's for circuit protection against overload and short circuit current fault suitable for 240/ 415 volts 50cycles AC supply with breaking capacity of 10kA, Curve-C and low watt losses as per IS/IEC 60898-1, energy limitation class-3, true contact indication, label holder facility in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs:- MCB Four Pole 50, 63amp. (10kA, Curve-C)

Supply and erection of Miniature Circuit Breaker MCB's for circuit protection against overload and short circuit current fault suitable for 240/ 415 volts 50cycles AC supply with breaking capacity of 10kA, Curve-C and low watt losses as per IS/IEC 60898-1, energy limitation class-3, true contact indication, label holder facility in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs:- MCB Single Pole 6-32amp. (10kA, Curve-C)

Supply and erection of Miniature Circuit Breaker MCB's for circuit protection against overload and short circuit current fault suitable for 240/ 415 volts 50cycles AC supply with breaking capacity of 10kA, Curve-C and low watt losses as per IS/IEC 60898-1, energy limitation class-3, true contact indication, label holder facility in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs:- MCB Triple Pole 50, 63amp. (10kA, Curve-C)

SHEET METAL CUBICAL PEDESTAL of Size 1200mm high, 900mm wide and 350mm deep with platform dimensions 1000mm x 450mm x 450mm

BAKELITE SHEET:Supply and erection of brown bakelite sheet white glazed translucent backside painted 3mm thick (thickness not less than 3mm) on the existing metal box including cutting, fixing and connection of existing switches and sockets and other petty material etc.

Providing, installation & fixing in position of LC1D Contactor 32 Amp at site complete in all respects and to entire satisfaction of engineer-in-charge

Modular Motor Starter

Supply, laying and erection of aluminium conductor XLPE insulated PVC sheathed armoured and served cable 1100 volts grade as per IS 7098 (Part-1)1988 to be laid loose in the existing trench or pipe as per PWD General Specifications:- Overall size 10sq.mm (2Core) unarmoured (Loose)

Supply and erection of PVC insulated PVC sheathed (3 core) round flexible wire with copper conductor (FR) cable (ISI marked) confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:- Overall size 4.0sq.mm (56/0.3mm), 3Core

Supply and erection of PVC insulated PVC sheathed (3 core) round flexible wire with copper conductor (FR) cable (ISI marked) confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:- Overall size 2.5sq.mm (50/0.25mm), 3Core.

Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:- Overall size 2.5sq.mm (Un-sheathed)

Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:- Overall size 1.5sq.mm (Un-sheathed)

Supply and erection of heavy duty Copper thimbles/lugs for cable end termination duly crimped including making necessary connections etc. completely:- Copper thimble cable Core size 4 - 6sq.mm

Earthing with G.I. wire/ rope in G.I. pipe partly recessed and partly on surface complete with 150cm long 50mm dia. G.I. earth pipe (Cutting threads and 36 Nos. holes, 1cm dia. to make a mesh around the GI Pipe) with G.I. reducing socket including erection of the same, 4.50 metre (14.76 feet) below ground level with 20Kg. charcoal & salt mixture etc., up to 8 metre in length (including boring & refilling). Earthing with 8 S.W.G. (4mm dia.) G.I. wire in 15mm dia G.I. pipe with G.I. reducing socket 50mm x 15mm (upto 8Metre in length)

Fixing additional Length of earthing with 8 S.W.G. (4mm dia.) copper wire in G.I. pipe with sockets, elbows, steel hooks and GI saddle clamps including painting etc.:- Additional Length copper wire 8 S.W.G. (4mm dia.) in 20mm dia. G.I. pipe (On Surface)

Providing, installation & fixing in position of Limit Switches 30 Amp capacity H.D. At site complete in all respects and to entire satisfaction of engineer-in-charge

Supply and erection of PVC flexible pipe complete without compression glands, locking arrangement, check-nuts as required:- (a) PVC Flexible Pipe 25mm dia.

Any other Item

M/S DARSHAN SINGH CONTRACTOR