REPAIR TO STORM WATER DRAIN, FENCING, COMPOUND WALLS, FOOTPATH AND HARDSTANDING UNDER AGE B/R-I AT INS SHIVAJI LONAVLA

Amount

Demolition of cement concrete in ground floor & paving n.exc 15cm thickness (below or above ground level .

M & L for cement concretetype D-2 1:4:8 (40mm graded aggregate) 75mm tk as in subbase.

Forming 12mm thick Expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade `A'

Dismatling Stone sett paving of any description or thickness

M & L For sand cushioning as screed bed under Paving Block

M &L for Machine Pressed Pre polished interlocking paver block not less than 60mm tk. With grey cement & pigment of any shape & size confirming to IS 15658-2006 M-35 grade.

Fixing only Machine Pressed Pre polished interlocking paver block not less than 60mm tk. With grey cement & pigment of any shape & size confirming to IS 15658-2006 M-35 grade.

M & L for Filleting in any position and to any shape of sec area exc 25 Sqcm and n exc 50 Sqcm in cement mortar 1:4 including all mitres, stops, etc.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises

M&L for chequered cement conc tiles 20 cm X 20 cm X 20 mm thick, set jointed and painted with grey cement and pigment to match the shade of tile over & including 20 mm thick screed bed bedding layer of morter in CM (1:6)

Demolition of brick/stone masonry built in cement mortar incl coping etc complete in any position, locations etc complete all as specified and directed incl removing the unserviceable debris as specified and as directed by Engr-in-charge.

PCC (1:4:8) type D2 (using 40 mm graded stone aggtegate) as in foundation filling and mass concrete

M & L for walling of random rubble uncoarsed, well bonded, bedded and solidly hearted,built in CM 1:6

Walling of random rubble uncoarsed, well bonded, bedded and solidly hearted,built in CM 1:6 using rubble obtain from demolition.

M&L Brick work with sub class 'B' bricks straight or curved on plan exc 6 M mean radius in CM 1:6

Provide cement concrete of 1:2:4 (20mm graded aggregate) type B1 for coping.

Extra over stone walling for hammer dressing 20 mm to face stones and dressing of face beds and joints, as specified, of random rubble walling, uncoursed or brought upto courses

Taking down cement plaster on stone walls or brick walls, including racking out joints, hacking for key scrubbing down with water etc.

Extra for forming fair finished drain or channel of 30cm or more inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends etc

M & L for rendering 20mm thick cement plaster (1:6) on stone masonry

M & L for rendering 15 mm thick cement plaster (1:4) on fair faces of brick or concrete surfaces.

M&L for Pre-cast cement concrete 1:2:4 type B1 using 20mm graded stone aggregate as in manholes cover slabs with plain fair faces including necessary form work (Reinforcement shall be measured & paid separately) including set in CM 1:6 all as directed by Engg-In-Charge

S&F Mild steel TMT bars 8mm & above dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in hard dense soil

S&F steel work as in vertical post connecting to plates, including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1998 grade St-240 complete

S&F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates

Pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified.

S&F Pre painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified.

Dismantling structural steel work any type and any location etc.

S&F framed work such as ornamental/intricated design gate including printed hings using Fi, Angle iron, square bars, MS plain sheet, grills, gratings etc. with ends of bars ladders, framed balusters, walk ways, railings, frame work of riveted or forged into spilkes, framed guard bars, barred iron doors,souldered and/or water tanks and similar work complete all as specified and directed by Engr-in-charge.

S&F Mild steel round bars bars 10mm dia , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to Fe-410 W (Gde-E-250) quality or Fe 290 (Gde-E-165) complete all as specified

Supply only chain link fencing, MS galvanised of any size and type complete all as specified and as directed

Fixing only chain lnk fencing including line wires, any mesh, size, any type of standards, rails, straining bolts, etc including provision of binding wire complete all as specified and as directed Note : chain link fencing and line wire shall be measured and paid separately as " supply only"

Demolition and breaking up drain pipes any size (Salt glazed ware, AC or Reinforced concrete) set in cement mortar

Reinforced concrete pipes,450mm bore class NP2, laid and jointed complete with collars

M & L for cement concretein foundations,mass concrete in filling ,Haunching,benching etc type C-2 1:3:6 (40mm graded aggregate)

M & L for RCC Type B1 1:2:4 (20 mm graded aggregate)in Foundations, including rafts,footings, foundation beams;plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete

S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165

M & L for Preparation of old painted steel surfaces of any description having width/girth exceeding 10cm and apply one coat of synthetic enamel paint complete all as specified and as directed. Note-: Pricing are inclusive all scafoldings used for up to the height of 4 storeys.

Extra for forming fair finished surfaces of drain or channels, inner girth 30 cms, using extra cement including forms, moulds mitred/ stopped ends etc., complete.

M&L for PCC 1:4:8 and type C-2 (using 40 mm graded stone) as in concrete bed to 450 mm drain pipes incl packing under and completely surrounding pipes after they are laid and tested.

VIJAYA ENTERPRISES

seema enterprises

M/S ANAND G NUNSE