Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L 1₹3.9 LAccepted-AOC NO 29 NELLUMANDI STREET MUTHIRAPALAYAM PUDUCHERRY 605 009 | PONDICHERRY | PUDUCHERRY | 605009 | L 1 | Accepted-AOC As per the chart generated L1 is accepted and AOC issued to L 1 |
Tender Value
₹4.1 L
EMD Value
₹8,220
Closing Date
19 Apr 2023, 4:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
The Executive Engineer, SBDI, PWD, Puducherry.
Office of the EE,SBDI,PWD,Puducherry.
Construction of Roof Top Rain Water Harvesting structure at PWD Office building in Gorimedu, Puducherry.
2023_PWDC1_12416_1
01/SBDI/2023-24/5
Open Tender
Civil Works
Item Rate
60 days
Puducherry
Please refer Tender documents.
2 documents required · 2 mandatory
₹525
₹8,220
8 Jul 2023
13 Apr 2023
20 Apr 2023
13 Apr 2023
19 Apr 2023
13 Apr 2023
Amount
Earthwork in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50m - all kinds of soil.
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50m and lift upto 1.5m.
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work upto plinth level - 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40mm nominal size).
Providing, hoisting and fixing upto floor five level precast reinforced cement concrete in shelves including setting in cement mortar 1:3 (1 cement : 3 coarse sand), cost of required centering, shuttering and finishing with neat cement punning on exposed surfaces but excluding the cost of reinforcement, with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5 mm nominal size).
Steel reinforcement for R.C.C.work including straightening, cutting, bending, placing in position and binding all complete upto plinth level - Thermo-Mechanically treated bars (ISI BRAND OF APPROVED MAKE) Fe - 415 or more.
Brick work with common burnt clay F.P.S. (non modular ) bricks of class designation 3.5 in foundation and plinth in - cement mortar 1:4 (1 cement : 4 coarse sand).
Honey -comb brick work 10/11.4 cm thick with common burnt clay bricks of class designation 7.5 in super structure above plinth level upto floor V level with cement mortar 1:4 (1 cement : 4 coarse sand).
Steel work welded in built up sections / framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required - in gratings, frames, guard bar, ladder, railings, brackets,gates and similar works.
Providing and fixing on wall face unplasticised rigid PVC rain water pipes conforming to IS: 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10mm gap for thermal expansion, (i) Single socketed pipes - 110 mm diameter.
Providing and fixing on wall face unplasticised - PVC moulded fittings / accessories for unplasticised rigid PVC rain water pipes conforming to IS:13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10mm gap for thermal expansion - bend 87.5 degree - 110 mm bend.
Providing and fixing unplasticised - PVC pipe clips of approved design to unplasticised- PVC rain water pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length, including cutting brickwork and fixing in cement mortar 1:4 ( 1 cement : 4 coarse sand) and making good the wall etc., complete - 110mm.
Providing and fixing to the inlet mouth of rain water pipe PTMT (an engineering thermoplastic ) grating square (Slit) 150mm square with a height of 8mm and weighing not less than 100 gms.
12mm cement plaster of mix -1:4 ( 1 cement : 4 fine sand).
15 mm cement plaster on rough side of single or halfbrick wall finished with a floating coat of neat cement of mix - 1:3 (1 cement : 3 fine sand).
Providing and fixing on wall face / column face unplasticised - PVC moulded fittings / accessories for unplasticisd - PVC soil and waste pipes conforming to IS:14735 - 1999 including jointing with seal ring conforming to IS :5382 leaving 10mm gap for thermal expansion - Single tee without door - 110 x110x110mm.
Providing and laying filter media using HBG metal of 40 mm size to a required thickness.
Providing and laying filter media using HBG metal of 63 mm size to a required thickness.
Supplying and lowering of UPVC 150mm dia Plain casing pipe confirming to IS: 12818-1992 with relevant amendments with class designation CM and with minimum wall thickness of 7.5 mm as per I.S.Code into the bore well with proper vertical alignments etc. Including the cost of materials, but excluding the cost of labour for positioning the assembly for lowering purpose using contractor's rig.
Extra for providing 3 mm slots in 150mm dia. UPVC casing pipes.
Providing, laying and jointing UPVC pipes(Finolex / jain / Supreme / Truebore / Nandi) (0.6 Mpa)conforming to IS specification 4985 and ISI marked including transportation to the site, lowering to the trenches, laying to proper grade and alignment, testing of joints with required testing equipment, including cost of solvent cement, excluding UPVC specials such as bends, tees, threaded pieces, couplers, reducer, endcaps etc., complete all as per IS and CPWD specification. - 140mm dia.
Providing and fixing in position UPVC moulded equal Tee (Finolex / jain) (0.6 Mpa) conforming to IS 7834 part II and ISI marked, including labour charges for jointing, jointing materials etc, complete - 140mm dia.
Providing and fixing in position UPVC moulded unequal Tee (Finolex / jain) (0.6 Mpa) conforming to IS 7834 part II and ISI marked,including labour charges for jointing, jointing materials etc,complete - 140 x 110mm dia.
Providing and fixing in position UPVC moulded plain coupler (Finolex / jain)(0.6 Mpa) conforming to IS 7834 part II and ISI marked,including labour charges for jointing, jointing materials etc,complete - 110mm dia.
Providing and fixing in position UPVC fabricated bend (Finolex / jain) (0.6 Mpa) conforming to IS 7834 part II and ISI marked,including labour charges for jointing, jointing materials etc, complete - 140 mm dia.
Drilling of borewell any where in Pondicherry including tranportation in alluvial soil, sedimentary strata of clay, sand stone, shale, pebbles, boulders etc. by first taking a pilot bore of 140mm / 150mm / 200mm and then enlarging to required dia by direct or reverse rotary mud circulation method, including fuel, labour for drilling, bentonite mud, water required for drilling at the site, contruction of mud pit (water available within a lead of 1.5Km) using rotary rig. -Upto 60 mts depth ending below ground level.
Reaming from 200mm dia pilot bore to 350mm dia bore.From 330 mts and upto 360 mts depth ending from ground level.
Supplying transportation and packing of 8mm size down gauge graded pebbles including filling the annular space gradually complete.The pebbles disintegrated pieces. should be free from any disintegrated pieces.
Providing and fixing of UPVC End Cap embedded in M.S. Cone suitable for UPVC casing pipe including the cost of materials and labour for jointing.
Providing precast RCC ring of size 150cm inner dia with 5cm wall thickness and 30cm height to the site at Puducherry. The RCC Ring should consist of required reinforcement and fixed in position from the bottom layer of rain water harvesting recharge pit. The rate including the cost of conveyance to Puducherry, loading, unloading, fixing charges and other taxes etc complete.
Providing precast RCC semi circular cover of size 160cm dia with 5cm thickness to the site at Puducherry. The RCC cover should consist of required reinforcement and fixed in top of RCC rings of rain water harvesting recharge pit. The rate including the cost of conveyance to Puducherry, loading, unloading, fixing charges and other taxes etc complete.
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .