PROVN OF 1 TOILET WITH 20 IWC AT A COY OF NO 4 TRG BN CATR OF ASC CENTRE SOUTH UNDER GE CENTRAL BANGALORE

Amount

Excavation in trenches in hard / dense soil not exc 1.50m wide and not exc 1.50m in depth and getting out complete all as specified & directed.

Surface excavation not exc 30 cm deep and averaging 15cm deep and getting out in hard / dense soil complete all as specified & directed.

Removal of excavated soil to a distance not exceeding 50m and depositing where directed at a level not exc. 1.5m above the starting point complete all as specified & directed.

Returning, filling in, including spereading, leveling, watering and well ramming in layers not exc 25cm thick complete all as specified & directed.

M&L for Plain Cement Concrete (1:4:8) type D-2 using 40mm graded stone aggregate as. in foundation filling and mass concrete complete all as specified & directed.

M&L for Pre cast Cement Concrete (1:3:6) type C-1 using 20 mm graded stone aggregate as in solid block masonary exceeding 10 cm in width and setting in cement mortar (1:6) complete all as specified & directed.

M&L for Pre cast Cement Concrete (1:3:6) type C-1 using 20 mm graded stone aggregate as in solid block masonary not exceeding 10 cm in width and setting in cement mortar (1:4) complete all as specified & directed.

M&L for Rendering 15 mm thick on other than fair faces of brick work or concrete surfaces of wall in cement mortar (1:6) finishing the surfaces even & smooth without using extra cement complete all as specified & directed.

M&L for Rendering 15 mm thick on brick work or concrete surfaces of wall in cement mortar (1:4) finishing the surfaces even & smooth without using extra cement complete all as specified & directed.

M&L for Rendering 10mm thick on fair faces of concrete ceiling surfaces in cement mortar (1:3) finishing the surfaces even & smooth without using extra cement complete all as specified & directed.

M&L for Reinforced cement concrete M-25 (Design mx) using 20mm graded crushed stone aggregates as in foundations, including rafts, footings, foundation beams, plinth beams, bsaes of columns etc basement slabs, under-reamed piles and mass concrete all as specified & directed.

M&L for Reinforced cement concrete M-25 (Design mx) using 20mm graded crushed stone aggregates as in slabs, supported on walls, beam and columns in floors all as specified & directed.

M&L for Reinforced cement concrete M-25 (Design mx) using 20mm graded crushed stone aggregates as in columns, pillars, piers, posts and struts all as specified & directed.

M&L for Reinforced cement concrete M-25 (Design mx) using 20mm graded crushed stone aggregates as in beams, chajja, cantilevers, bressummers, lintels over 1.5 mtr span all as specified & directed.

M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams,sides and sofits of foundation and plinth beams; and similar works; vertical or to batter for fair finished flat surfaces complete all as specified & directed.

M&L for Form work to edges of concrete flats, breaks in floors, openings in concrete walls, floors and roofs and sides of RCC/PCC bands in walls, horizontal or sloping and similar work all exceeding 20 cm wide for fair finished flat surfaces of concrete complete all as specified & directed.

M&L for Form work to sides of pillars, posts, struts, piers, columns and stanchions for rough finished flat surfaces of concrete complete all as specified & directed.

M&L for Form work to soffits of suspended slabs such as roof slabs, floor slabs etc not exceeding 200mm thick rough finished flat surfaces all as specified & directed.

M&L TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed

All as per item No 19 here-in-before but 5mm dia and over upto and including 10mm dia as in stirrups, spacers, binders -ditto-

M&L for Plain Cement concrete (1:4:8) type D-2 using 40mm graded stone aggregate as in 75 mm thick sub base to floor all as specified and directed

M&L for Non-skid Ceramic tiles 7 to 8 mm thick (square /rectangular) area of each tile exceeding 0.18 sqm but not exc 0.36 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match shade over & including 15 mm screed bed in cement mortar (1:4) all as specified and directed

M&L for Glazed ceramic coloured tiles 450x300X7 mm thick in vertical surfaces (skirting/dado) set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 10 mm thick backing coat in cement mortar (1: 4) all as specified & directed.

S&F Powder coated aluminium Ventilator (partially fixed glazing and Partially louvered gauzing) etc complete all as specified & directed with the following specifications :- (i) Aluminium frame section 45x25x1.80mm. (ii) Fixing arrangements of hold fast in PCC (1:3:6) making good the disturbed surfaces. (v) 4mm thick frosted glass ordinary quality (partially fixed glazing and Partially louvered gauzing) and fixed with rubber gasket etc.

M&L for Solid PVC door frame of size 50mm x 47mm made out of 5mm prelam PVC sheet and edges will be painted to match with prelam sheet, reinforced with MS square tube supplying and fixing in opening as per specification all as specified & directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS Frames shall be covered with heat moulded wood grain printed PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and wood grain printed PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail & bottom rail: Paneling of wood grain printed PVC sheet to be fitted in the MS frame welded/ sealed to the stiles & rails with 5mm x 15mm wide PVC sheet beading and joined together with solvent cement, supplying and fixing in the frame at site as per specification all as specified & directed.

S&F AluminIum anodised barrel tower bolt 150mm long extruded section all as specified & directed.

S&F Extruded aluminum alloy handles of size 150mm fabricated type anodised all as specified & directed.

M&L for Spreading and levelling in layers not exc. 25 cm thick and watering and well ramming under floor complete all as specified and directed.

M&L for Hardcore of broken stone of gauge not exc. 63mm, deposited spread and levelled in layers n. exc. 15cm thick, watered and rammed to a true surface in broken bricks boulders all as specified and directed.

M&L for PCC (1:3:6) type C-2 using 40 mm graded stone aggregate as in 75mm thick in plinth protection etc.laid in alternate bays finished even and fair without using extra cement and filling sealing compound type B all as specified and directed.

S & F Towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 190gms) all as specified and directed.

M&L for Prepration of new plastered ceiling surfaces and applying three coats of white wash all as specified and directed.

M&L for preparation of newly plastered wall surfaces and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS 15489:2004,alkali & fungal reisistance, dirt resistance exterior paint of required shade ( Company Depot Tinted ) with silicon additives @ 1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.9 litre/ 10 Sqm complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and applying following finishes all as specified & directed :- (i) 2mm thick wall care putty finished to smooth surface (ii) One coat of self primer (iii) two coats of Acrylic emulsion distember

M &L for water proofing treatment over RCC roof slabs all as specified & directed :- (i) Applying oil bound bitumen primer @ 0.20 kg/sqm (ii) 3mm thick APP modified water proofing membrane weighting not less than 3.8 kg/sqm reinforced with non woven polyester matt weighing not less than 160 gm/sqm having softening point not less than 150mm centigrade, having tensile strength of 650 N/sqcm and 350 N/sqcm in longitudinal and transverse directions respectively of the reinforced tearing strength of 180N by torch application with minimum 10cm side overlapping and 15cm end lap (iii) applying a coat of blown grade hot bitumen 90/15 over the membrane @ 1.2 kg/sqm top of membrane surface (iv) solar reflective bituminous aluminium paint @ 0.10 kg/sqm

S&F PVC valveless, syphonic action type, flushing cistern 10ltr capacity, low level, white, with inlet, ball valve, float and handle including brackets all as specified & directed

S&F Vitreous china wash hand basin, white, flat back size 580 X 450 mm including brackets including cutting for and pinning in ends of brackets or erecting stand including PTMT 32mm waste coupling and waste pipe etc complete all as specified & directed

S&F Vitreous China wash down water closet pan (orissa pattern), white 580x440 with intergral foot rest complete all as specified & directed

S&F Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) complete all as specified & directed

S & F European type Water Closet seat cover, white, flat bottom solid with CP hinging device, nuts & bolts etc complete all as specified & directed

S&F Flush pipe of polythylene of low or high density or PVC 32mm dia, for low/high level flushing cistern complete all as specified & directed

S&F Vitreous china Urinal Half stall type (white) 580x380 x 350 mm minimum with grating and union for discharge pipe including PTMT spreader of any colour for fixing to 15mm dia pipe complete all as specified & directed

S&F Urinal partition slabs, white colour, size 310 x 700mm terminating about 40cm above floor line complete all as specified & directed

S&F Pillar tap cast copper alloy fancy type with capstan heads, chromium plated fancy type screwed down high pressure with or without lettered ‘Hot’ or ‘Cold’ with long shanks and nut screwed for iron pipe 20 mm bore complete all as specified & directed

S&F Bib taps, cast copper alloy with crutch or butterfly handle, fancy chromium plate screwed down, screwed for iron pipe 20mm dia or for brass ferrule and fixed complete all as specified & directed

S&F Stop valve cast copper alloy, chromium plated fancy type, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe 20mm dia complete all as specified & directed

S & F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete complete all as specified & directed

S&F PVC connection 15mm dia 450mm long with PTMT nuts complete all as specified & directed

S & F in repair PVC Waste pipe of size 32/40mm dia for WHB/Sink all as specified & directed

S & F Shelf of PTMT soap dish with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 300gms) all as specified & directed

Supplying and laying CPVC pipes, 25 mm outer dia, SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified & directed

Supplying and laying CPVC pipes, 20 mm outer dia, SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified & directed

Supplying and laying CPVC pipes, 40 mm outer dia, SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified & directed

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints, 75 mm dia bore laid in trenches or floor all as specified & directed

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints, 75 mm dia bore fixed on walls all as specified & directed

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints, 110 mm dia bore laid in trenches or floor all as specified & directed

S&F PVC (SWR) bends of (any radius) 75 mm dia bore with access door all as specified & directed

S&F PVC (SWR) bends of (any radius) 110 mm dia bore with access door all as specified & directed

S&F PVC (SWR) junction double, (double T), equal or unequal with access door 110 mm bore all as specified & directed

S&F PVC (SWR) junction single (single T) equal or unequal provided 75 mm bore all as specified & directed

S&F PVC reducers 110 mm x 75 mm all as specified & directed

S&F PVC (SWR) floor traps, plain with grating including jointing to waste pipe with solvent cement, 75mm dia outlet 75mm dia

S&F PVC (SWR) P trap 110mm bore all as specified & directed

S&F PVC(SWR) vent cowl 75mm all as specified & directed

S & F rotational moulded polyethylene water storage tanks of capacity 1000 litres (cylindrical vertical with closed top) triple layered, hoisted and fixed in position all as specified in SSR Part I with followinf accessories :- (i) tank adaptor 25mm dia (ii) Gun-metal gate valves of 25mm dia with iron wheel head, screwed both ends for iron pipe (iii) Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe 25mm dia

M&L for PCC (1:3:6) type C-2 using 40mm graded stone aggregate as in 75mm thick sub base complete all as specified and directed.

M&L for Plain Cement Concrete (1:3:6) Type C-1 using 20 mm graded stone aggregate in lintels up to 1.5 M span, cills and other similar bands, plinth courses, parapets, copings, bed plates, troughs and the like including weathering, slightly rounded or chamfered angles and throating including necessary formwork all as specified & directed.

M&L for chequered cement concrete tiles of 30x30x25 mm thick with grey cement and pigments set, jointed and pointed in neat cement slurry in floors including 20mm thick screed bed of cement mortar (1:6) complete all as specified and directed.

Material and labour for PCC (1:3:6) type C-2 using 40 mm graded crushed stone aggregate in bedding to DWCPE drain pipes 150 mm dia bore, including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and as directed

All same as per item No 71 here-in-above but for 200 mm bore pipe -dittto-

M & L for Double Wall Corrugated Polyethelene DWCPE pipes, SN 4, 150mm inner dia mm diameter Pipes) laid in trenches including jointing/cutting as required length pipes with jointing with socket/spigoht with elastomeric sealing as per manufactutrers instruction to make the sewer line functional including testing on completion complete all as specified and as directed

All same as per item No 73 here-in-before but 200mm inner dia -ditto-

M&L for Rendering 15mm thick in cement mortar (1:4) on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement mixed with water proofing compound all as specified & directed. (Note : WPC will be measured seperately)

Supply only liquid water proofing compound (ISI marked) complete all as specified and as directed

M&L for Plain Cement Concrete (1:2:4) type B1 using 20mm graded crushed stone aggregate as in coping including weathering slightly rounded or chamfered angles as directed including necessary form work and finishing the exposed surfaces complete all as specified & directed

M&L for Pre-cast Reinforced cement concrete (1:2:4) type B1 using 20mm graded crushed stone aggregates as in manhole covers set in cement mortar (1:6) including necessary form work all as specified and directed. (Note: Steel reinforcement shall be measured and paid for separately)

M&L for TMT Steel bars 6mm to 8mm dia as in reinforcement, cut to length, bent to shape required including cranking, bending spirally of hooping for columns, hooking ends and binding with MS wire (annealed not less than 0.9mm dia) all as specified and directed.

M&L for Plain Cement Concrete (1:2:4) type B-2 using 40 mm graded stone aggregate as in surface channels and drains complete all as specified and as directed.

M & L for Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends all as specified and directed.

M&L for removing excavated soil exc 250 m and but not exc 500 m and depositing where directed complete all as specified and directed.

M&L for point wiring complete concealed with 1.5 Sqmm single core PVC insulated unsheathed cable 1100 volts grade multi stranded with FRLS copper conductor conforming to IS 694 drawn through and incl non-metalic rigid PVC conduit medium grade ISI marked including accessories concelaed type wiring including including cutting chases in walls G I branded sunken boxes suitable for modular cover plates with frames for housing modular switches, switch socket outlets, fan regulators etc., including provision of 1.5 Sqmm PVC insulated single core multi stranded copper conductor cable as earth continuity conductor and connecting to common earth dolly, all as specified and as directed.for the following :-

One light point controlled by one switch

One fan point controlled by one switch/regulator

one 3 pin socket out let 5 Amps on same board

All as per item No 82 herein before but 2.5sqmm cable for 3 pin 16 Amp modular switch -ditto-

S&F Modular switch 1 way 6 Amps,1 module 240 Volts AC complete all as specified and directed

Supply and fix modular switch 1 way 16Amps 1 module complete all as specified and directed

Supply and fix modular socket outlet 3 pin 6Amps 2 module duly shuttered 230volts complete all as specified and directed

Supply and fix modular socket outlet 3 pin 6Amps /16 Amps universal type, 2 module duly shuttered 230volts complete all as specified and directed

Supply and fix Ceiling rose, surface bakelite 65x50mm, three terminals including supply and fix PVC blocks complete all as specified and directed

S&F in repairs LED tube light fitting of 20 watts 6000K , 230 volt, with aluminium extruded channel powder coated with diffuser for glare free light complete with all fixing accessories such as 2 nos of PVC square/round boxes, screws, etc and connecting up with three core flexible copper conductor cable of size 24/0.20 sqmm complete all as specified and directed.

S&F in repairs LED tube light fitting of 10 watts 6000K , 230 volt, with aluminium extruded channel powder coated with diffuser for glare free light complete with all fixing accessories such as 2 nos of PVC square/round boxes, screws, etc and connecting up with three core flexible copper conductor cable of size 24/0.20 sqmm complete all as specified and directed.

S&F LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection including connection up with twin core twisted flexible copper conductor cable with 1.5 M long suitable size all as specified and directed.

S&F Bracket for security light fitting made out of 25 mm bore GI Light grade 1.00 M long fabricated to required shape fixed with two pair of MS flate iron clamp of size 50mm X 6 mm of required shape with nuts, bolts and washers suitable for steel tubular pole including painting of mild steel flat iron surface with two coates of synthetic enamel paint over a coat of red oxide primer complete including taking down unserviceable bracket all as specified and directed.

S & F Sheet metal enclosure (ISI marked) distribution board, SPN 8 way horizontal type, double door, single pole and neutral with 200 Amps rated neutral copper bus bar for housing MCB, 240 volts, fixed flush in wall surface, and tested on completion complete all as directed.

Supply and fix in repairs MCB single pole 6 to 32 Amps, 240 volts, C series, 10 kA rupturing capacity complete all as specified & directed.

Supply and fix in repairs MCB single pole & neutral 32 Amps, 240 volts, C series,10 kA rupturing capacity complete all as specified & directed.

S&F Exhaust fan, metal body 300mm sweep, Heavy duty, 240Volts,1500RPM with M S louver including core cutting in wall of suitable dia , connecting with 3core flexible copper wire 24/0.2sqmm from ceiling rose to fan terminal all as specified and directed

M&L for Earthing with galvanised steel earth plate electrode 60cm x 60cm x 6 mm thick buried directly in ground, earth pit not less than 2.25 mtr deep below normal ground level, with top edge of the plate not less than 1.5 mtr below normal ground level connecting with G I earth wire 4mm dia by means of bolt nut, check nuts and washers including PCC (1:2:4) type B-1 using 20mm graded stone aggregate pit with RCC (1:2:4) type B-1 cover and handle of 6mm dia MS bar made to shape, GI medium grade 20mm bore pipe for watering, protection G I pipe, common salt, chorcoal, funnel wiremesh, earthwork in any type of soil, returning filling in and removal of soft/loose soil to a distance n. exc 50 mtr including earth test point and making connections, testing on completion all as per electric plate No 3 of SSR Part-I including removing existing earthing all as specified & directed

M&L for sand cushioning with a layer of river sand 23 cm thick under and above the cable all as per Para 19.75 of SSR Part-I complete all as specified and as directed

Supply & laying sub class 'B' burnt bricks for cable protection all as per Para 19.75 of SSR Part-I complete as specified as directed

Supply & laying, testing of XLPE insulated, screened, PVC bedded, galvanised steen strip or wire armouned power cables (heavy duty) with aluminium conductor, 1100 volts grade, cross sectional area 10 Sqmm, 4 core laid in trenches/wall complete as specified as directed

S&F in repairs Gun metal Gate valve of size 25 mm dia bore with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F in repairs Gun metal Gate valve of size 20 mm dia bore with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F in repairs Galvanised Iron tubing, medium grade 25 mm dia bore with all fitting laid in trenches/walls/Roads complete all as specified and directed.

Cutting of existing GI / DI pipe and connecting the pipe line including specials all as specified & directed.

S S CONSTRUCTIONS (BID ID -3494584)

C-Will Engineers & Architects (BID ID -3495503)