PROVN OF STREET LIGHT, LT PANEL, CHANGE OVER SWITCH AND SPL REPAIR TO STREET LIGHT, HIGH MAST LIGHT AND TIMER PANELS UG CABLES WITH CONNECTED ITEMS (PH-I TO PH-III) OF E/M UNDER GE TENGA.

Amount

Supply, erecting and fixing in true vertical position, steel tubular swaged pole (410 SP-31) 9.0 mtr long, complete with cast iron base plate, pole cap / finial taper plug, bolts, nuts and washers, welded reduced section and longitudinal weld throughout entire length of pole including 2 coats of black bituminous paint externally upto planting depth and remaining exterior portion of pole shall be provided with two coats of aluminium paint over one coat of red oxide primer and incl taking down existing old unserviceable poles complete all as specified and directed. (Numbering of the poles shall be done with synthetic enameled painted letter of shape & size as directed.) Note :- Excavation incl earth work and PCC foundation will be measured and paid separately.

S&F of new generation energy saving and environmental friendly long life LED building security light made up of innovative die cast aluminium housing high power LED as lighting source with IP - 66 power consumption 100 watt complete input voltage of 150-240 Volt (nominal rated voltage 240 Volt) complete including connection of twisted 3 core copper cable of size 1.5 Sqmm dia for connecting phase, neutral and earth from pole junction box to light length as required at site, all as specified and directed.

M&L for kiosk box for luminaires, weather proof made out of PVC/HDPE fire retardent, non fusing, shock & rust proof, single piece moulded/ SMC housing and SMC cover with hinged door, pole mounting type comprising of copper connector of 32 Amps 4 pole with 03 nos MCB of capacity 6 Amp each , of minimum size 300 x 200 x 105 mm, fixed on pole with MS clamps 30 x 5 mm with necessary nuts, washer and incl applyong two coats of synthetic enamel paint over a red oxide promer on steel surface/lamps and embossing/painting of danger sign of size not less than 10 cms x 7.5 cms with letter and conventional skull and bones in single red colour on front face of kiosk box complete all as directed. Make :- Sintex/Hensal/Superme

M & L for PVC insulated copper conductor of size 2.5 sqmm 3 core drawn through PVC pipe with clamping materials complete all as specified and as directed.

S & F of GI brackets for fixing LED street light fitting fabricated out of GI tubing 32 mm dia, medium grade, 0.90 mtr long , bend to 120 degree shape by cutting, welding and well finishing including MS clamp of flat iron of size 32 x 4 mm -02 Nos complete for steel poles / PCC pole as per site requirement with nut, bolt & washers for fixing of GI bracket complete all as specified and directed.

S & F in replacement of MCCB, 04 Pole, capacity 63 Amps with ultimate breaking capacity 36 KA at 415 volts with fixed thermalsettings conforming to IEC 60947 Part-I/IS-13947 Part-I , (Ics=Icu=100%) in the existing panel with suitable connecting copper terminals at site complete all specified and directed.

Supply, laying & testing in repalcement cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminum conductor, 1100V grade with stranded aluminium conductor of size 16 sqmm 4 core

M&L for PCC 1:3:6 type C-2 (using 40mm graded stone aggregates) as in foundation filling and mass concrete including form work for poles all as specified and directed by Engr-in-Charge.

M&L for PCC 1:2:4 Type B1 using 20mm graded crushed stone aggregate as in coping etc including necessary from work complete all as specified and as directed.

Excavation in trenches in any type of soil not exc 1.5 mtrs wide and not exc 1.5 mtr in depth for laying of pipe/ cables/ poles etc and getting out loose&soft soil complete all as specified and as directed.

Excavation in trenches in any type of soil not exc 1.5 mtrs wide and not exc 3 mtr in depth for laying of pipe/ cables/ poles/fencing posts etc and getting out soft & loose soil complete all as specified and as directed.

Returning fitting in any type of soil including spreading leveling watering and well ramming in layers n.exc 25 cm complete all as specified and as directed.

Removing excavated soils to a distance n.exc. 50 mtr and depositing where directed at a level not exc 1.5 m above the starting point complete all as specified and as directed.

M&L for PCC cable cover class LV type 1 flat size 250 mm x 150 mm x 40 mm, ISI marked across the cable for protection of cable after sand cushioning complete all as specified & directed.

M & L for laying of fine, clean sand (river sand) free from sharp materials and stone particals in trenches for cushioning of cable 8 cm thick under cable and 15 cm thick over the cable including gently punning complete all as specified and directed. Note:- The total thickness of sand shall be measured 18 cm after punning.

S & F of MCCB, 04 Pole, capacity 400 Amps with ultimate breaking capacity 36 KA at 415 volts with fixed thermalsettings conforming to IEC 60947 Part-I/IS-13947 Part-I , (Ics=Icu=100%) in the existing panel with suitable connecting copper terminals at site complete all specified and directed.

S & F of change over switch with advanced neutral, OFF LOAD, 200 Amps, 4 pole, AC 415 Volt, manual Change over insheet metal enclosure including operating handle conforming to IS:13947 (Part-3) complete all as specified and directed.

Supply, laying & testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric cables with stranded aluminium conductor, 1100 volts grade, of 95 Sqmm 3.5 core complete all as specified and directed

Supply, laying & testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric cables with stranded aluminium conductor, 1100 volts grade, of 70 Sqmm 3.5 core complete all as specified and directed

Supply, laying & testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric cables with stranded aluminium conductor, 1100 volts grade, of 35 Sqmm 3.5 core complete all as specified and directed

M&L for steel tubing galvanised, medium grade complete with fittings laid in trenches/ fixed along with poles etc as protection to cables of size 80 mm dia bore complete all as specified and as directed.

Cutting of existing road for removing / laying pipe line, depth of cutting not exceeding 60 cm and width 45 cm and filling the trench of road i.e. excluding top 15cms with existing aggregate obtained from cutting , watered and properly rammed to satisfaction of EIC and finally provide 150 mm thick PCC 1:3:6 type C1 using 20 mm graded crushed stone aggregate to entire width of trench & finally match the top surface to road & disposal of debris to a distance not exceeding 50 Mts and depositing where directed complete all as directed. (Note: Quoted rate is deemed to be inclusive of 150 m thick PCC 1:3:6, cutting any type of road and removal of debris).

Material & labour for earthing complete with galvanised steel earth plate electrode 600x600x6 mm thick buried directly in ground (earth pit not less than 2.25m deep below the ground level) with top edge of the plate not less than 1.5mtr below the normal ground level connected to GI Strip 32 x 6 mm by means of bolts, nuts, check nuts and washers of galvanised iron.Earth wire protected by GI pipe 15 mm bore(medium grade) and connected to main switch board or main control board as directed and as specified and shown in electrical plate No. 3 of SSR Part I (2009) including necessary concrete pit in PCC (1:3:6) type C1, pre-cast RCC (1:2:4) type B1 cover slab 40 cm x 40cm x 5cm reinforced with 8mm dia TMT bars @ 15cm C/C with one handle for lifting made out of 8mm dia bar, funnel, wire mesh, 20mm dia GI pipe medium grade for watering, charcoal or coke and salt in alternate layers including necessary excavation and earth work in any type of soil and testing complete all as directed by Engineer-in-Charge.

Supply, laying & testing in repalcement cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminum conductor, 1100V grade with stranded aluminium conductor of size 25 sqmm 4 core including taking down of old unserviceable UG cable/service wires.

Description all as per item No 26 above but of size 16 sqmm 4 core.

Description all as per item No 26 above but of size 16 Sqmm 2 core

S&F in replacement kiosk box for luminaires ,weather proof made out of HDPE/FRP housing fire retardant, non fusing, shock & rust proof, single piece moulded and cover with hinged door, pole mounting type comprising of four pole copper connectors of 16 Amps capacity with 6 Amp MCB single pole , of minimum size 300x200x105mm, fixed on pole with MS, clamps 30 x 5mm with necessary nuts, washer and incl applying two coats of synthetic enamel paint over a red oxide primer on steel surface/clamps complete all as directed. . Make- Sintex/Supreme/Hensal

S & F in replacement of GI brackets for fixing LED street light fitting fabricated out of GI tubing 32 mm dia, medium grade, 1.2 mtr long , bend to 120 degree shape by cutting, welding and well finishing including MS clamp of flat iron of size 32 x 4 mm -02 Nos complete for steel poles as per site requirement with nut, bolt & washers for fixing of GI bracket complete all as specified and directed.

M&L for replacement of new generation energy saving and environmental friendly long life LED street light made up of innovative die cast aluminium housing high power LED as lighting source with IP - 66 power consumption 45 watt complete input voltage of 150-240 Volt (nominal rated voltage 240 Volt) complete including taking down of old unserviceable street light any type/any capacity as specified and directed.

Description all as per item No 31 above but of capacity 60 Watt

Description all as per item No 31 above but of capacity 70 watt.

Description all as per item No 31 above but of capacity 90 Watt

Description all as per item No 31 above but of capacity 210 Watt

S&F in replacement of 1100 Volts grade heavy duty ISI marked cable PVC insulated stranded aluminium conductor one twin core cable flat or circular of size 10 sqmm served with inner sheathing of PVC tape & overall PVC sheathed in service connections complete all as specified and as directed

Supply , fixing and testing of 3 phase automatic street light switch using integrated sensor based NATURE SWITCH for automatic switching of street lights based on LUX level of natural light required illuminance for switching on is ‹ 30 Lux and for switching OFF › 10 Lux level. The sensor (nature switch) along with suitable power contactors input (supply) MCB and output (load) MCB(s), support terminals should be enclosed in pole/ wall mountable enclosure made of rust proof, electric shock proof , termite proof and FR graded SMC junction box conforming of IP 54 degree of ingress three phase 12 KW lightning load capacity including mounting bracket , cable glands, openable doors with lock complete all as specified and directed. The contactor MCB and circuit wiring should suitable enough to take load of 12 KW equally distributed over three phase and street light timer should be comprising of following:- (a). Input MCB (3 Nos) rating 40 Amps (b).Contactor MCB (3 Nos) rating 40 Amps (c).Out put MCB (3 Nos) rating 40 Amps (d).Three phase circuit wiring minimum 10 Sqmm multistranded copper wire. Model -SWADEEP -02EC 12 KW3P, Make Kakatiya Energy Systems Ltd

Supply & fixing of single phase automatic street light switch using integrated sensor based NATURE SWITCH for automatic switching of street lights based on LUX level of natural light required illuminance for switching on is ‹ 30 Lux and for switching OFF › 10 Lux level. The sensor (nature switch) along with suitable power contactors input (supply) MCB and output (load) MCB(s), support terminals should be enclosed in pole/ wall mountable enclosure made of rust proof, electric shock proof , termite proof and FR graded SMC junction box conforming of IP 54 degree of ingress single phase 8KW lightning load capacity including mounting bracket , cable glands, front openable doors fitted with hinges & locking arrangment complete all as specified and directed. The contactor MCB and circuit wiring should suitable enough to take load of 8 KW equally distributed over three phase and street light timer should be comprising of following:- (a). Input MCB rating 40 Amps (b).Contactor MCB rating 40 Amps (c).Out put MCB rating 40 Amps (d).Single phase circuit wiring minimum 10 Sqmm multistranded copper wire. (e)Model No :- SWADEEP -02EC 5 KW1P. Make :- Kakatiya Energy Systems Ltd

M & L for road cutting incl necessary excavation 45 cm wide and 90 cm in depth as in trenches in any type of soils/rock for laying LT UG cable through pipe after laying /through the cable trenches will be filling top with M&L PCC 1:3:6 type C-1 using 20 mm grdaeds stone aggregates from top over 15 cm thick hard good of broken boulders , 63 mm gauge over 15 cm bolders 100 mm dia over filled and rammed earth to make good the disburbed surface etc complete all as specified and directed.

Material & labour for earthing complete with galvanised steel earth plate electrode 600x600x6 mm thick buried directly in ground (earth pit not less than 2.25m deep below the ground level) with top edge of the plate not less than 1.5mtr below the normal ground level connected to galvanised wire 4mm dia by means of bolts, nuts, check nuts and washers of galvanised iron.Earth wire protected by GI pipe 15 mm bore(medium grade) and connected to main switch board or main control board as directed and as specified and shown in electrical plate No. 3 of SSR Part I (2009) including necessary concrete pit in PCC (1:3:6) type C1, pre-cast RCC (1:2:4) type B1 cover slab 40 cm x 40cm x 5cm reinforced with 8mm dia TMT bars @ 15cm C/C with one handle for lifting made out of 8mm dia bar, funnel, wire mesh, 20mm dia GI pipe medium grade for watering, charcoal or coke and salt in alternate layers including necessary excavation and earth work in any type of soil and testing complete all as directed by Engineer-in-Charge.

M & L for Pole painting of 9 mtr long Street light pole complete with one coat of synthetic enamle alluminium paint and preparation of surface including writing of pole Nos with Black Enameld paint not Less than 100 mm height complete all as diected and specified by Engr In Cahrge .

M/S DK TRADERS (BID ID -3390408)

M/S R P M CONSTRUCTION (BID ID -3390441)

M/S SM ANSARI (BID ID -3390497)

polar agencies (BID ID -3390483)

M/S DKT CONSTRUCTION (BID ID -3390609)

D.P. Traders (BID ID -3390611)