Improvement of Paver Block Surface and Cement Concrete Road at Ward no.2-Ulagathevar 1st Street 5th Cross - 122002S022, Ulagathevar 1st Street 6th Cross - 122002R063, Ulagathevar 1st Street 4th Cross - 122002R062, Ward no.25-Kuttiya Pillai 3rd C

Amount

Dismantaling the existing Plain Cement Concrete road surface portion clearing away and carefully stacking materials useful for reuse for any thickness plain cemcent concrete in places shown by the department officers and clearing and leveling the sit etc .,complete complying with standard specification

Providing and laying ,spreading and compacting graded stone aggregate to wet mix macadam (WMM ) soecification including premixing the material with water at OMC in mechanical mix plant carriage to mixed material by tipper to site laying in uniform layers with paver in sub base / base course on well prepared surface and compacting with vibratory roller to achive the desired density complete as per clasue 406 of MORTH specifications.

Providing centering for sides and soffits of R.C.C.works such as lintels, slab with beams plain surface etc., complete including shuttering upto 3.30 M height using mild steel sheet of size 90 c.m x 60 c.m and 10 gauge stifer with M.S. angles of size 25 mm x 25 mm x 3mm laid over silver w.c.wood joints of size 10 c.m. x 6 c.m. spaced at about 90 c.m. c/c and supported by casurins props of 10 c.m. to 13 c.m. dia spaced 75 c.m. centre to centre complying with as per standard specification. (for Drain & Culvert)

Plain Cement Concrete 1:1.5:3 (One part of Cement, one and half part of Crushed Sand (M- Sand), three coarse aggregates) using 20mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges etc., complete as per standard specification

Plain Cement concrete 1:2:4 (One cement two sand and Four aggregate ) using 20mm ISS size hard broken granite metal laid in layers not more than 15cm. thick to required thickness , including cost and conveyance of materials to work site & labour charges complete with standard specifications

Supplying and laying Rubberised interlocking Paver block M40 grade Providing and laying of 83mm thick high strength type conforming IS 15658-2006 of rubberized interlocking paver lock in size of minimum compressive strength of 40N/mm2 in uniform shape of approved make to be laid in flurring bone pattern with sand cushion below the uniform shap of approved non skitting surface in the top and the rate including levelling the base preparation of pavers as sub base, sand cushion 150mm thick laying out of pavement cut the pieces to fix the edge vibring the pavers,sweeping tranporting loading unloading of laying paver block as per standard specification,.

R SABEER ALI