Renovation and painting work of Dispensary at township sector-46.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : 13.99.1 One or more coats on old work

Providing and fixing of Cupboard , frame and partition will be made of 18 mm thick HDHMR board and back with 8 mm thick HDHMR board with 1 mm thick Laminate/Sunmica both side . The shutters will be made with 18 mm thick commercial board with 1 mm thick laminate/sunmica both side including adeshive and screws with all necessary hardware fittings hinges , Handel , locking arrngment , Hanger rod and other fittings etc complete as per direction of engineer in charge .

Providing and fixing of Kitchen base and over head storage , frame and partition will be made of 18 mm thick HDHMR board and back with 8 mm thick HDHMR board with 1 mm thick Laminate/Sunmica both side . The shutters will be made with 18 mm thick commercial board with 1 mm thick laminate/sunmica both side including adeshive and screws with all necessary hardware fittings hinges ,all required kitchen storage basket , profile, Handel , other required fittings etc complete as per direction of engineer in charge .

Providing and fixing in wall 12mm plyboard as per IS:710 of approved brand including fixing with screws in wall all complete as per instruction of EIC:

Providing and fixing 2mm thick PVC flooring sheet with adhesive to floor surface.

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. 9.127.2 1.0 mm thick

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. 14.1.1 With cement mortar 1:4 (1 cement : 4 fine sand)

Finishing walls with Acrylic Smooth exterior paint of required shade : 13.111.1 Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. 13.83.2 Two coats

Total