Loading
Loading…
Loading…
Tender Value
Refer Docs
EMD Value
₹13,300
Closing Date
28 Sept 2026, 2:00 pmDue tomorrow
SE M1
NCTPS II
MPM III Ventilation system Overhauling of Unit-II BC bay Air washer system 1,00,000 CMH capacity centrifugal fans, water circulating system pumps and valves, cleaning of spray headers with branch pipes, strengthening and rectification of
2026_EB_706279_1
NCTPS_II_UII_Spec_100_26_27
Open Tender
Maintenance Works
Works
NCTPS II
Please refer Tender documents.
2 documents required · 2 mandatory
₹0
₹13,300
Yes
21 Sept 2026
21 Sept 2026
29 Sept 2026
21 Sept 2026
28 Sept 2026
21 Sept 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Charges for Overhauling of 1,00,000 CMH/Air washer Centrifugal Fan, by dismantling centrifugal fan,fan body, Impeller casing, Impeller - shaft assembly, pillow block and bearing, repair and renewal of wornout parts shaft with impeller, bearings, pulleys ,etc., providing supports during assembling of discharge ducts, checking and rectifing the foundation arrangments, grouting, providing vibration pads, reassembling, aligning, trial run, dynamic balancing, vibration checking and commisioning, including cost of bearings and consumables and T & Ps hire charges. | 4 | nos | - | - |
| 2 | Charges for Overhauling 2 Nos of 250 NB dia Butterfly Valves, 2 Nos of 200 NB dia Butterfly Valves, 2 Nos. of 200 NB dia NRVs and 2 Nos.of 150 NB Butterfly Valves & 3 Nos of 50 NB dia Butterfly Valves, including the cost of consumables and hire charges for T & Ps, scaffolding charges etc., | 2 | sets | - | - |
| 3 | Charges for servicing of air washer water circulation Pumps decoupling and dismantling of pumps, cleaning, checking of pump internals such as impeller shaft, bearings, sleeves, casing rings, gland sleeve, coupling etc., replacing the wornout parts, assembling the pump, aligning with motor and trail run, including supply of bearing and coupling cost of consumables and tools & plants. | 4 | nos | - | - |
| 4 | Charges for dismantling the 150 NB Main Header spray pipe, 150 NB X125 NB Branch header spray pipe and 32NB X 25 NB branch distribution pipes, inside the collection water tank by providing suitable Scaffolding and cleaning,assembling and water leak checking if any leak arresting by welding, commissioning, including the cost of consumable and hire charges for T & Ps. | 2 | sets | - | - |
| 5 | charges for erection of new distribution screen sheets and mist eliminators to its original position inside the 2,00,000CMH air washer tank, this work involes leading, lifting, positioning, welding the distribution screen sheet inside the air washer tank including cost of consumables and T&Ps. (Required Distribution sheet for this work will be supplied by TNPGCL) | 2 | sets | - | - |
| 6 | Charges for Rectification and strengthening of severely corroded and deteriorated air washer tank, Eliminator fixing frames, filters fixing frames, base frame & walkway, this work involves dismantling, fabrication and erection by cutting & welding of structurals materials, machining the base plate, marking, drilling & tapping as per the existing size including cost of consumables hire charges for T&P's., | 4.5 | MT | - | - |
| 7 | Charges for iron and steel material transporting, unloading at work spot, arranging tools & tackles etc., for leading & lifting the material up to 9M elevation including cost of consumables and T&Ps hire charges | 4.5 | MT | - | - |
| 8 | Charges for cleaning and painting the airwasher tank, pipe lines, supporting frames by one coat of red oxide primer and two coats of enamel paint one over the other with proper intervals. Including cost of consumables, paint and T & Ps. | 250 | m2 | - | - |
| 9 | Charges for Supply of M.S.Plate (6MM Thick) | 3 | MT | - | - |
| 10 | Charges for Supply of M.S.Angle (ISMA 65x65x6mm) | 1.3 | MT | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.84 MB
BOQ_848883.xls
BOQ • 0.28 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .