GE ELECT/TOKEN-74/2026-2027

Excavation in trenches not exceeding 1.5 meters wide & not exceeding 1.5 meters in depth for laying of cable and getting out in soft/loose soil including trimming the sides forming bottom surfaces to required level complete all as specified and as directed by Engineer-in-charge.

Returning, filling in including spreading leveling, watering and well ramming in layers not exceeding 25 cms thick in each layer of soil complete all as specified and as directed by Engineer-in-charge.

Removing excavated material to a distance n.exc 50 meters and depositing where directed at a level not exceeding 1.5 mtrs above the starting point complete all as specified and as directed by Engineer-in-charge.

Supply and fix double wall corrugated, High Density Polymer Ethyl pipe for laying of Electric cable of size 120 mm outer dia and 103 mm inner dia with IS : 16205 laid in trenches, wall, floor, pole including bends, sockets and other connected accessories complete all as speicified and directed by Engineer-in-Charge.

Supply, laying, jointing, testing and commissioning in replacment of LT underground cables 1100 volts grade any size PVC insulated XLPE and PVC sheathed, heavy duty armoured, with multistranded aluminium conductors, IS-7098, Part-II marked, laid in wall/ trenches/ duct/ under road/ footpath/ etc complete all as specified and directed. Cables of size 70 SQMM 3.5 core complete all as specified and as directed by Engineer-in-charge. Note: Rate is inclusive of cable lugs and glands of suitable size

S&F in replacement of KIOSK box weather proof made out of PVC, one piece molded SMC base and out door pole mounted hinged door size 333 x 233 x 120 mm out side and 300 x 200 x 105mm inside dimensions comprising of Connector 4 poles strips for 3 phase and neutral 63 Amp and 6 Amp MCB SP with base for controlling the street light, FI clamps 30x4 mm with necessary MS nuts bolts and washers including embossing/painting of Danger notice of size not less than 10 cm x 7.5cm with letters, figures and conventional skull and bones in signal red colour on front face of KIOSK box body complete all as specified and as directed by Engineer-in-charge.

Supply, installing, testing and commissioning in replacement of factory made and tested (including CPRI type tested certified panel) Timer Panel board ,cubical , out door type , plate form mounted, suitable for 415 volts, 3 phase, 4 wire, 50 HZ AC supply system . The panel shall be dust and vermin proof. IP-65 class protection and shell be made of 3.15 mm CRCA MS sheet, and minimum 32x32x5mm thick MS angle iron frame work, powder coated finish over one coat of red oxide primer on outside surface and painted inside with two coats of red oxide primer, front opening type, closing locking arrangement including power wiring, copper conductor FRLS cable, IS-694 marked, 1100 volts grade and internal wiring with 1.5 Sqmm copper conductor With platform complete all as specified and as directed by Engineer-in-charge and comprising of the following:- (i) MCB 4 Pole , 63 Amps,50 Hz,415 Volts, 16 KA, with thermal magnetic release - 01 Nos (ii) 3 Pole power contractor, type MNX 110 having 2 NO +2 NC contacts -01 ( iii) Analog Time switch , 240 Volt AC , 50 Hz -01 Nos (iv) Auto /manual selector switch -10 No