SPL REPAIR TO BLDG NO 96B TRG SHED AT 9 ASSAM AND SPL REPAIR TO ROOF IN BLDG NO 115 AND 119 (COMMAND TEST LAB) UNDER GE (WEST) LUCKNOW

Amount

Dismantling asbestos cement (corrugated, semi corrugated etc) sheets & ridge in roof coverings complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed

S & F 0.50 mm thick pre-painted galvalume aluminium zinc coating galvanised iron based corrugated steel sheet with side lap and end lap of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wallself tapping screws complete all as specified and as directed.

S & F 0.50 mm thick Pre-painted galvalume aluminum zinc coating GIbased Plain steel sheet / Ridge any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed

S&F rolled mild steel in roof trusses, (framed), trussed purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections ) including distance pieces, cleats etc. conforming to Fe-410-W(Gde.E-250) quality-B complete all as specified and as directed.

Demolition of brick work built in cement mortar including all quoins, arches pillars etc complete all as specified and as directed.

M & L for brick work with sub class "B" brick (old size) straight or curved on plan to any radius in half brick thick walls built in CM 1:4 to any radius complete all as specified and as directed.

M&L for brick work with fly ash bricks, old size, straight or curved on plan exceeding 6 mtr mean radius and built in cement mortar 1:6 complete all as specified and as directed.

Taking down cement plaster from brick wall including racking out joints, hacking for key scrubbing down with water etc complete all as specified and as directed.

M & L for 5 mm thick rendering in CM (1:3) on fair faces of brick wall on concrete surfaces of ceiling finished even and fair complete all as specified and as directed.

M & L for 15 mm thick rendering in CM (1:6 ) on fair faces of brick wall or concrete surfaces finished even and smooth including complete all as specified and as directed.

M & L for preperation of surface of wall/chajja and applying a coat of tapecrete P-151 acrylic polymer modified cementitious slurry consisting of one part of TAPECRETE P-151 and two parts of cement by weight complete all as specified and as directed.

M & L for PCC 1:2:4, type B0 as in padding or levelling coarse for filling undulations or depression on roof and for platform for mounting service tanks complete all as specified and as directed

M & L for providing cement concrete type B-1, 1:2:4, (20 mm graded stone aggregate) including necessary formwork as in copings complete all as specified and as directed.

S & F PVC (SWR) Pipes150mm bore single socketed in any length with rubber ring joints , fixed on walls complete all as specified and as directed.

S & F PVC (SWR) bends any radius 150mm size complete all as specified and as directed.

M&L for preparation of newly plastered surface of roof, parapet, (Horizonal and vertical portion complete) including clening the surace by using wire brush/pressure hose and appying high performance polyurehane liquid membrane roof casting cold applied in two coats @1.5 Kg/Sqm/2 Coats spray/brush applied with an elongation of 300% to 700% and tensile strength of not less than 3N/Sqmm asper ASTM D412 and ASTM D2370, crack bridging ability of 3.5 mm as per ASTM C 1305, shore a hardness of not less than 60as ASTM D 2240. The item also includes a coat of epoxy prime applied @0.15 Kg/Sqm and a geotextile of 400 GSM to be applied over first coat while first coat is still wet complete as per manufacturer's instructions and sound enginering practice complete all as specified and as directed.

M & L for provn of roof treatment with polymeric water proofing membrane after taking down existing treatment and removal of waste materils complete all as given below :- (a) Taking down entire existing water proofing treatment on roof and cleaning the roof slab top all as specified and directed. (b) M & L for plastering 10mm in CM 1:4 using 100% course sand on roof including WPC @ 3% by weight of cement. (c) Applying a coat of oil base bituminous primer @ 0.25 Iitres/sqm and allow to dry. (d) Applying a coat of hot blown bitumen grade 85/25 @ 1.20Kg/Sqm. (e) Applying and laying polymeric water proofing membrane of weight not less than 3kg/sqm. (f) Applying a tack coat of hot blown bitumen grade 85/25 @ 1.20kg/sqm. (g) M & L for two coats of aliuminium paint over bituminous surface all as specified and directed. (h) Demolition of PCC on Roof any thickness and in any position complete all as specified and as directed

M & L for provn of roof treatment with polymeric water proofing membrane with PCC tiles after taking down existing treatment and removal of waste materils complete all as given below :- (a) Taking down entire existing water proofing treatment on roof and cleaning the roof slab top all as specified and directed. (b) M & L for plastering 10mm in CM 1:4 using 100% course sand on roof including WPC @ 3% by weight of cement. (c) Applying a coat of oil base bituminous primer @ 0.25 Iitres/sqm and allow to dry. (d) Applying a coat of hot blown bitumen grade 85/25 @ 1.20Kg/Sqm. (e) Applying and laying polymeric water proofing membrane of weight not less than 3kg/sqm. (f) Applying a tack coat of hot blown bitumen grade 85/25 @ 1.20kg/sqm. (g) M & L for cement concrete tiles 250 x 250 x 20 mm thick, machine pressed, set, jointed and pointed in neat cement slurry as in floors/terraces over and including 15 mm thick screed bed in CM 1:4 complete allas specified and directed. (h) Demolition of PCC on Roof any thickness and in any position complete all as specified and as directed

M & L for Cutting out cracks to V-section in existing roofs or terracing, cleaning out, wetting, grouting with cement and sand slurry 1:3 mixed with water proofing compound as per manufacturer's instructions all as specified and as directed.

Dismantling wall/ceiling/cupboards boards complete all as specified and as directed.

Providing and fixing tiled false ceiling of specified materials of size 595x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 grams / sqm, both sie inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600mm center to center to form a grid of 1200 x 600 mm and secondary cross "T" of length 600 mm and size 24 x 25mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be supended from ceiling using GI slotted cleats of size 27x37x25x1.6mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24mm of all T-Sections shall be pre-painted with polyester paint, all coplete for all heights as per specifications, drawings and complete all as specified and as directed finish of the tiles. GI metal Ceiling Lay in perforated Tegular edge global white colour tiles of size 595 x 595 mm and 0.5 mm thick with 8mm drop; made of GI sheet having galvanizing of 100 gsm/sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC (Noise Reductions Coefficient) of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation and backed with a black Glass fiber acoustical fleece

HI Steel Providing and fixing GI Clip in Metal Ceiling System of 600x600 mm module which includes providing and fixing 'C' wall angle of size 20x30x20 mm madeof 0.5mm thick pre painted steel along the perimeter of the room with help of nylon sleeves and wooden screws at 300 mm centre to centre, suspending the main C carrier of size 10x38x10 mm made of G.I steel 0.7 mm thick from the soffit with help of soffit cleat 37x27x25x1.6 mm rawl plugs of size 38x12 mm and C carried suspended clip and main carrier brackets at 1000 mm c/c. Inverted triangle shaped spring Tee having height of 24 mm and width of 34 mm made of GI steel 0.45 mm thick is then fixed to the main C carrier and in direction perpendicular to it at 600 mm centers with help of suspension brackets. Wherever the main C carrier andd spring T have to join , C carrier and spring T connectors have to be used . All sections to be galvani andzed @ 120 gms/sqm (both side inclusive), fixing with clip in tiles into spring T with GI Metal Ceiling Clip in plain Bevelled edge global white colour tiles of size 600x600 and 0.5 mm thick with 25 mm height , made of GI sheet having galvanizing of 100 gsm/sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum) including factoty painted after bending and perforation complete all as specified and as directed

HI Steel Open Cell Ceiling tile are available Galvnaized steel / aluminium designed to lay onto 15 mm Tee Grid. These tiles can be used without any tee grid system features open cell ceiling panels with no frame or border around them . The panels simply connect to each other with easy lock in system of main and cross. When grid system is not required, the Lock - In -system of main and cross provides architects and designers with additional flexibility, especially in customized size and diffrent colours. GI Open Cell Ceiling System (white) Tile size 595 x 595 mm complete all as specified and as directed

M & L for 20mm thick granite(any type) work (table rubbedand polished) over 15mm thick screed bed in CM 1:6 including cutting, polishing & rubbing and including rounding of exposed edges, fixed as in steps(Tread & riser), skirting, platforms/window cills etc including roughening the surface complete all as specified and as directed.

M&L Granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including moulding of edges complete all as specified and as directed

Material and Labour for preparation of new or previously untreated surface of steel surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed

Material and Labour for preparation of old surface of steel surface of any description over 10cm width or girth and applying one coats of synthetic enamel paint complete all as specified and as directed

Complete removal of existing treatment of old treated surface of wall complete all as specified and as directed.

M & L for water proofing cement based putty @ 1 kg (undiluted) per Sqm of average thickness 1mm over the New plastered/ old painted surface of wall after scrapping to prepare the surface even and smooth complete and sanding of the putty surface with mechanical wall sander (having mechanical vaccum mechanism) having RPM not less than 1500, sanding pad of 240 grit or above to make the surface free from dust etc by skilled labour as per the following steps:- Step 1 :- Mix the putty powder by adding water as per manufacturer's instruction and mix it with putty mixer with the mixing capacity of min 2.5 kg putty per minute. Step 2 :- Apply the first coat of the prepared mixer with the help of fully automatic airless spray machine of putty application finishing the surface even and smooth in level without any undulations. Step 3 :- Allow 6-8 hrs time to dry the putty surface.

M & L for water based premium acrylic smooth exterior emulsion of approved colour witgh silicon additive excellent dirt pickup resistance with low VOC less than 50, Antifungal / Anti Algal properties in two coats @ 1.79 lit (undiluted) / 10 Sqm diluted with water as per manufacturer's instruction applied over priming coat with fully automatic airless spray machine of paint application with a flow speed of min 1 lit per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface in between subsequent coats of paint complete all as specified and as directed.

M & L for Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. Two or more coats over and including a coat of 1mm thick birla wall care putty / POP complete all as specified and as directed

M & L for preparation of plastered ceiling surface and applying two coats of oil bound distemper complete all as specified and as directed.

M & L for preparation of old plastered ceiling surface and applying one coats of oil bound distemper complete all as specified and directed.

Demolition of PCC in ground floor and paving exc 15cm thick and below or above ground level complete all as specified.

M&L for 100 mm thick Cement concrete PCC 1:4:8 type D-2(using 40mm graded granite stone aggregate) in sub base of flooring complete all as specified and directed

S&F Chequered cement concrete tiles 30cm x 30cm x 25 mm thick set, jointed and pointed in neat cement slurry in floors over and including 20 mm thick screed bed bedding layer in CM 1:6 complete all as specified and as directed.

Dismantling structural steel work including doors, gates but excluding framed truss etc all as specified and directed.

M & L of framed work as in doors or gates of angle, tubular tubes or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and similar work conforming to Fe-290 Gde E-165 fixing complete all as specified and as directed.

M & L for glazed ceramic colour tiles of size ( 350 x450mm ) x 7mm thick in walls etc, set & joints in neat cement slurry and pointed in white or colours cement to match the colour of tiles as in skirting/dadosover 10mm thick rendering in cm 1:4 incl taking taking down plaster/tile complete all as specified and as directed

M & L of Finishing walls/floor tiles with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 Sqm) complete all as specified and as directed

M & L of eaves gutter and pipes any description, n. exc 60 cm girth synthetic enamel (ordinary tint) paint on old surfaces including holder bats, distance pieces, etc. (length measured over bends, branches etc.) complete all as specified and as directed

Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and as directed

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc complete all as specified and as directed

M&L for machine cut kota stone slab as in flooring 20 to 25 mm thick and jointed with grey cement slurry mixed with pigment to match the shade of the slab including grinding, rubbing and polishing with & including screed bed or bedding layer of mortar 20 mm thick in cement mortar 1:4 for laying floor finishes complete all as specified and as directed

M&L for machine cut kota stone 20 to 25 mm thick as in steps, risers, skirting, dado etc, bedded and jointed with grey cement slurry and pointed in white cement with admixture of pigment to match the shade of the stone including grinding, rubbing and polishing with & including rendering 10 mm thick in cement mortar 1:4 finished rough to fix stone complete all as specified and as directed

M&L for Cement concrete type C2 1:3:6 (40 mm graded aggregate) in foundations, filling and mass concrete complete all as specified and as directed

M&L of Sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed

M&L only refixing (except tiles) of Machine pressed precast concrete rouber moulded interlocking paver block any shape and size of 60mm thickness, M-35 Grade PU coated including Dismantling floor, hearth or interlocking/wall tiling (but not backing), removing serviceable tiles to reused and rubbish off the premisesas complete all as specified and as directed

Material & labour preparation of newly plastered surfaces of wall & applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces one coat wall care putty upto smooth wall finishing complete all as specified and as directed

Complete removal of existing treatment on walls any number of layers by scrapping with steel scrapper or by other means and M&L for prepration of newly plastered surfaces of wall and applying one coat of alkali resistance primer and two coat of oil bound distemper over a one coat of wall care putty upto smooth surfaces complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding , removing and rubbish off the premised etc complete all as specified and as directed

M & L of vitrified tile double charge any colour 7 to 8 mm thick (square/rectangular) size (600 x600) mm in floors laid over 15 mm thick 1:6 cement mortar screed bed etc. set and jointed in neat cement slurry and pointed in white of coloured cement to match complete all as specified and as directed

M & L for glazed digital tiles any colour tiles of size ( 600 x1200 mm ) x 10mm thick in walls etc, set & joints in neat cement slurry and pointed in white or colours cement to match the colour of tiles as in skirting/dados over 10mm thick rendering in cm 1:4 complete all as specified and as directed

S & F for galvanized steel water tubing medium grade of 15mm bore with & including all fittings and fixed complete to walls and ceilings or laid in floors including taking up or down steel water tubing and connections of 15mm bore, fixed in walls, ceiling, floors, trenches etc complete all as specified and as directed

S & F for galvanized steel water tubing medium grade of 20mm bore with & including all fittings and fixed complete to walls and ceilings or laid in floors including taking up or down steel water tubing and connections of 20mm bore, fixed in walls, ceiling, floors, trenches etc complete all as specified and as directed

Supply & Fixing in repair gun metal gate valve screwed both ends to 20mm bore pipe complete all as specified and as directed

S&F of fancy type brass chromium plated towel ring with round flange complete all as specified and as directed.

S&F of toilet paper holder, superior quality, fancy type, brass chromium plated with flap complete all as specified and as directed.

S&F in repair hand shower (health faucet), superior quality, round shape, single flow, brass chromium plated, with 1m long flexible pipe with wall hook bracket etc. and all fittings for bath complete all as specified and as directed.

Supply and fixing in repair for 15mm bore Pillar cock self closing system, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed

S&F in repair long body 15mm bore bib cock self closing system, cast copper alloy, chromium plated with capstan head, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified & directed.

S&F PVC connection pipe 15mm size & 600mm long with cromium plated brass coupling on both ends suitable for 15mm bore steel tubing complete all as specified and as directed

S&F in repair 15 mm bore stop valves/angle valve copper alloy, fancy type,chromium plated half turn with screwed down, high pressure with crutch or butterfly handle screwed both ends fixed to GI pipe complete all as specified and as directed.

Supply and fixed in repair PVC rotational moulded over head storage tank 1000 Lts capacity including 20mm dia PTMT float valve including dismantling of water tank complete all as specified and as directed

S & F in repir of vitreous china table top type wash basin, any colours any shape of size 560x380x120 mm including CP waste coupling and 32 mm dia bottle trap and any other connection part etc complete all as specified and as directed.

S&F Extended wall mounted closets Vitreous China wash down water closet pan, pedestal pattern, white, cascade type with built in flushing cistern and shelf closing plastic water closet seat cover, white, complete all as specified and directed.

S & F in repair Sensor Operated Urinals, bowl type (back or corner wall type), size 390x370x610 mm and any colour and shape complete including urinal sensor flushing battery operated part Code 500964 or providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including Doum type waste coupling bottle traps, waste pipe, and other connecting part complete all as specified and directed.

S & F in repair of Toughned glass as in partitions/ division and similar work including cutting to shape, drilling holes with necessary stainless steel fitting complete all as specified and directed.

S&F in repair glass corner self assembly, fancy type, made of 6 to 7mm thick sheet toughened glass of size 250x250mm, fixed with CP brackets, complete all as specified and as directed

M&L for 75 mm thick PCC 1:3:6 type C2 using 40 mm graded crushed stone aggregate as in plinth protection surface finished fair and even without using etra cement complete all as specified. Note :- Plinth protection shall be of width as directed and shall be laid to slope of 1:30 in alternative bays not exceeding 3 meter in length. Joints of 6 mm wide and 10 mm deep shall be provided along the wall and bays and same shall be filled with bitumen mastic (1:3) complete all as specified and as directed.

Taking down chowkhat frame with shutter (without taking out shutter from the frame) n.exc 1.50 Sqm and removing from site complete all as specified and as directed

Taking down chowkhat frame with shutter (without taking out shutter from the frame)exc 1.50 Sqm and n.exc.4.00 sqm and removing from site complete all as specified and as directed

Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). ® Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and as directed (Note: stainless steel butt hinges and necessary S S screws shall be paid separately)

Supply & fix Stainless steel Butt hinges 100mm size complete all as specified and as directed

Supply & fix 150mm long alumunium anodised barrel tower bolts of extructed section complete all as specified and as directed

S & F Powder coating Anodized aluminium frame for doors, windows with one or more rebates using 1.50mm thick aluminium section including joining cleat for fixing etc. complete all as specified and as directed

S & F Anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc complete all as specified and as directed

Supply only for 5 mm thick Frosted glass, pin head type and glazing with oil putty in squares exc 0.5 sq. m in each pane including necessary require fitting complete all as specified and as directed.

S&F powder coated (minimum thickness of powder coating 50 micron) anodized aluminum window shutter three track sliding type three track section having frame size Bottom with outer 92 x 45.50 x 1.50 (section code 20617), Top & side 92 x 31.75 x 1.50 (section code 20831) and aluminum section of shutter Top & bottom size 40 x 18 x 1.55 (section code 20736), interlock size 40 x 18 x 1.45 (section code 20737) side/middle size 40 x 18 x 1.55 (section code 20738) including necessary joining cleats, glazing clips, glazing clips rubber backing, anodized aluminum snap beading screw anodized aluminum fitting complete and including glazing by using 5 mm thick plain sheet glass and stainless steel wire mesh of dia 0.36 mm and aperture 1.4 mm complete all as specified and as directed. Refer drg No LZ/C-TD/151 sheet No 1/2 and 2/2. Note:- 1. Glazed shutters glass thickness not less than 5.00 mm and SS wire mesh shutter with SS wire mesh as approved by GE shall deemed to be included in quoted rate and No extra payment will be made separately. 2. No extra payment for variation in section will be made for section profiles of higher sizes.

S & F powder coating anodized aluminium glazed ventilator shutter half portion fixed with figured glass and other half portion with movable louvred complete all as specified and as directed

S & F of Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement complete all as specified and as directed

S&F kitchen PVC cabinet and cupboard in required sizes at site made out of 18mm thick one side decorative lamination & other side balancing lamination sheet consisting of carcass 18mm thick pvc sheet & provision of shutters made out of 18 mm thick one side decorative laminated PVC sheet all required brackets 5.5screws etc. The panels shall be fabricated using adhesive and screws where ever required. All the edges shall be covered with 2mm thick edge bonding tape or 90 degree edge bent finish including all necessary fittings as per site requirementand as per make and specification mentioned as per drawing and complete all as specified and as directed

Supply and fixing 30 mm width of flaps continuous piano hinges Mild steel, bright finish or electroglavanised complete all as specified and as directed.

S&F ball cateches with 8 mm dia steel bal and brass body and strike plate magnet ball catcher for cup board shutters complete all as specified and as directed

S&F 100mm long aluminum anodised, hasp and staple, safety type, with mild steel hinge pin including bolts to hinge plate and fixed with screws complete all as specified and as directed

S & F of 5 to 10 mm thickness of ACP/ PVC insulation panels with EPS stuck to 1 mm printed PVC sheet suitably placed in false ceiling grid made of Aluminium/G.I./M.S. as per manufacturers instruction complete all as specified and as directed

M & L in repair of UV Resistant PVC Sheet light weight, washable for covering of Gate, grills, windows, balconies, Open areas, bathrooms Sheet complete all as specified and as directed

Taking down carefully copper/aluminium point wiring(light, fan,socket or power) complete with fittings such as switches, sockets, ceiling rose,fan regulators, sketch light fittings, and making good the disturbed surface of walls and floors etc complete all as specified and as directed

Taking down carefully main switches DB's/ MCB DB's and making good the disturbed surfaces of walls complete all as specified and as directed

M&L, Point wiring using approved colour coding as per IS (Red, Black and Green for single phase circuits), with multi-stranded copper conductor 1.5 Sq. mm nominal cross-sectional area, single core, PVC insulated and unsheathed FRLS cable 1100 volts grade, ISI-694 marked with valid CML No. in and including medium grade PVC concealed conduit and conduit accessories concealed in wall/roof/floor etc, ISI marked with valid CML No.(IS-9537-1983 for conduits and IS:3419:1976 for conduit accessories), with mild steel/pressed steel sunken boxes (with earth dolly) duly painted with two coats of anti corrosive paint/aluminium paint over a coat of red oxide primer internally, and two coats of black bituminous paint over a coat of red oxide primer externally, covered with 3 mm thick plastic laminated sheet cover for fixing of switches, sockets and fan regulators etc, including PVC insulated multi-stranded copper conductor 1.5 Sqmm nominal cross sectional area single core F.R.L.S. cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and as directed at site for the following:- Note: Switch and socket to be measured and paid for separately. (a) One light/fan point controlled by one switch

All as per item No 93 herein above, but one socket outlet point 5 Amp on an independent board complete all as specified and as directed

Same as item No 94 but on the same board complete all as specified and as directed

All as item No 93 herein before but using 2.5 sqmm , PVC insulated, stranded copper conductor single core cable for one 3 pin 15/20 Amp socket out let point on an independent board.

M&L for point wiring complete for one light point or one fan point controlled by one, one way 5 Amp switch with PVC (FRLS) insulated unsheathed multistranded copper conductor of size 1.50 sqmm nominal cross sectional area single core drawn into and including suitable size surface conduit/casing caping, including pressed steel concealed terminal switch boxes not less than 1.6mm thick of reqd size factory made duly painted inside and outside with one coat red oxide primer, 3mm thick plastic laminated bakelite sheet top cover (ISI Marked) fitted with chromium plated brass screws & washers complete including 1.50 sqmm nominal cross sectional area PVC(FRLS) insulated unsheathed multistranded copper conductor green as earth wire connected to earth dolly with all accessories complete all as specified and as directed.

S & F switch piano flush button single pole one way 5 Amp 240 volt complete all as specified and as directed

Ditto all as item No 98 but 15 Amps complete all as specified and as directed

S & F socket outlet flush type multipurpose 2 in 1 , 3 pin 5 and 15 Amp, 230 volts complete all as specified and as directed

S & F socket outlet flush type 5 pin 5 Amps 240 volts complete all as specified and as directed

S & F ceiling rose surface bakelight two to three terminal complete all as specified and as directed

S&F angle type holder insulated body with back plate suitable for batten fittings complete all as specified and as directed

Supply and fixing in repairs LED lamp 7/9 watt, complete all as specified and as directed.

Supply and fixing wall/surface mounting luminaires (Mirror Light) integrated LED Batten( 2 feet) 10/12 W, 6500 K, 230V ,100 lumens/watt,with extruded aluminium housing & integrated electronic driver complete including Electrical connection with PVC three core copper flexible wire & all necessary fixing arrangements complete all as specified and as directed. Makes shall be provided group-I cat as per latest approved make given by HQ CECC

Supply and fixing LED industrial light 35 watt 230 V AC outdoor type with Eco wellglass in PDC housing with a luminaries efficeancy of 110 lm/watt and consume lesser energy and give high lighting level . Superior tapered fin design with exceptional thermal mangement ingress proction of IP 66 , 10 KV SPD available in Tip -311-70-57-SL-CP-NSG (SUPRA NEO-II (T) complete all as specified and as directed. Makes shall be provided group-I cat as per latest approved make given by HQ CECC

Supply & fixing bulk head light fitting made from cast aluminium body with heat resistance pressure die cast housing, IP-65 protection cover suitable for bulk head fitting integrated type 6.5 W LED, 6000K , 105 lumens/watt including inbuilt electronic driver complete all as specified and as directed. Makes shall be provided group-I cat as per latest approved make given by HQ CECC

S&F in repair super bright LED (2X2), 36 W, 6500 K recess mounting minimum 100Lumens/watt IP20 ,IK02 PF>.9 and 4kv inbuilt surg protection with high efficent LED source all as per specified and directed. Makes shall be provided group-I cat as per latest approved make given by HQ CECC

S&F in repairs of surface type round LED 12W downlighter all as per specified and directed. Makes shall be provided group-I cat as per latest approved make given by HQ CECC

Supply and Fixing wall/surface mounting luminaires integrated LED Batten 20 W, 6000 K,100 lumens/watt , 230V with extruded Aluminium housing 4 feet long with frosted PMMA/PC diffuser & integrated electronic driver complete including Electrical connection with PVC three core copper flexible wire & all necessary fixing arrangements complete all as specified and as directed Makes shall be provided group A cat as per latest approved make given by HQ CECC

S&F in repair LED Building security light 24/25 Watt with high power LED source (>110lumen/watt) PDC housing, IP65 and IK 07 with 4 KV inbuilt surge protection potted driver including Electrical connection with PVC three core copper flexible wire & all necessary fixing accessories such as bracket of GI pipe light grade 40 mm dia 0.60 mtr long bend to shape as per suitable size along with all accessories, fixed on wall including bolts & nuts. Makes shall be provided group-I cat as per latest approved make given by HQ CECC

S&F in replacement MCB, triple pole & neutral 63 Amp, 415 volts, 10 KA breaking capacity, 'C' curve complete all as specified and as directed.

S&F in replacement sheet metal enclosure for DB’s when MCB, to be used, SPN, 8 ways 240 volt with 200 Amps rated bus bar made out 1.2mm thick double door complete all as specified and as directed. (MCB required to be fixed shall be paid for separately under respective items of this Schedule ‘A’)

S&F MCB SPN 32 to 63 Amp 240 volts 10 KA breaking capacity complete all as specified and as directed

S&F MCB SP 10 to 32 Amp 240 volts 10 KA breaking capacity complete all as specified and as directed

Supply and fixing exhaust/fresh air fan 230/240 V of size 250 mm sweep (PVC body) 1100-1325 RPM with louvers including provn of flexible three core cable from ceiling rose to terminal for making connection , fitting on wall including all necessary fixing accessories complate all as specified and as directed.

Supply, laying and testing XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 25 Sq mm 3.5 core complete all as specified and as directed.

Supply & Laying or passing through pipe, 1100 volt grade heavy duty cable with XLPE insulated Aluminum condector served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and over all PVC sheathed of 10 Sq mm 2.0 core stranded condector nominal cross section complete all as specified and as directed

Excavation in trenches in soft/loose soil n.exc 1.5M wide and n. exc 1.5 M depth and getting out, including framing bottom surface for laying cables and complete all as specified and as directed

Returning, filling in soil watering and ramming into layers of 25cm after laying of cable complete all as specified and as directed

Disposal of surplus soil n.exc 50M distance from the starting point and depositing where complete all as specified and as directed

M&L for sand cushioning to UG cables (8 cm deep before laying of cable and 15cm deep over the cable) complete all as specified and as directed

Supply & Laying sub class `B’ bricks old sizes over the HT/LT cable laid flat for protection of cable complete all as specified and as directed

M & L for Earthing complete with glavanised steel earth plate elactrode 600x600x6 mm thick buried directly in ground with top edge of the plate not less 1.5 mtr deep below with top edge of the plate not less 1.5 mtr deep below normal ground level connected to galvanised earth lead wire 4.0 mm dia by means of nut , bolt, check nut and washer of galvanised iron or of steel, earth lead protected by 15 mm dia GI pipe light grade watering pipe 20 mm dia GI light grade GI wire meshed funnel alternate layer of charcoal and salt PCC chamber , reassed for and including RCC cover including all necessary excavation and earth work, earth wire connected to main switch board, testing the earthing after completion all as specified and shown in electric plate no 5 of MES SSR Pt-I 2009 print and complete all as specified and as directed

M&L for two single core PVC insulated FRLS cable 6 sq mm nominal cross sectional area stranded copper conductor and one single core green PVC insulated 6.0 sqmm stranded copper conductor earth continuity FRLS cable drawn through PVC conduit 20/25 mm dia including all conduit and fixing accessaries concealed in wall including cutting chases in wall and making good disturbed surface to match of walls /ceiling complete all as specified and as directed. (Note-The cost of PVC pipe and accessoried shall be deemed to be included in the quoted rate)

M&L for two single core PVC insulated FRLS cable 4 sq mm nominal cross sectional area stranded copper conductor and one single core green PVC insulated 4.0 sqmm stranded copper conductor earth continuity FRLS cable drawn through PVC conduit 20/25mm dia including all conduit and fixing accessaries concealed in wall including cutting chases in wall and making good disturbed surface to match of walls /ceiling complete all as specified and as directed (Note-The cost of PVC pipe and accessoried shall be deemed to be included in the quoted rate)

Taking down carefully copper/ aluminum sub main wiring/ serivce connection including teak wood batten/ conduit and making good the disturbed surface of wall complete all as specified and as directed.

S & F MCB DB TPN 4 Way (Vertical Type) double door, for mounting, MCBs, isolator, ELCBs etc factory made, confirming to IS: 13032 fabricated out of CRCA sheet not less than 1.2 mm thick fitted with DIN channel, neutral link and 200 Amps rated bus bar , DBs shall be semi glossy finished with epoxy polyester based powder paint sprayed and backed at high temperature, between powder paint process the sheet steel having to go through the anti rust conditioning in not less than seven tank process to ensure smooth finish and protection against corrosion atmosphere. The DBs shall be double door type with hinged door with locking arrangement. The DBs shall be of same make as MCBs /Isolator. DB shall also be provided with label marking indicating the incoming and outgoing circuits on all way as specified. The DBs shall be of IP 42 protection class.

S&F in repairs MCCB 4 Pole, 415 V, fixed type, 100 Amps with breaking capacity 16 KA complete all as specified and as directed

S&F in replacement sheet metal enclosure for DB’s when MCB, to be used, SPN, 12 ways 240 volt with 200 Amps rated bus bar made out 1.2mm thick double door complete all as specified and as directed. (MCB required to be fixed shall be paid for separately under respective items of this Schedule ‘A’)

Supply and fixing modular ac box power unit with socket plug top and MCBs with a two pin and one pin for earth plug and socket complete with one single pole MCB 20 Amp complete all as specified and as directed

Taking down carefully ceiling fan/exhaust fan/Wall fan of any capacity from any position by disconnecting all connection and removing from site and refixing after complete repair of bldg work same location/position complete all as specified and as directed.

M/S S S A ASSOCIATES

M/s Bajpai Constructions

ANIL CONSTRUCTION

M/S KAUSHIK CONSTRUCTION

Mount International

Sadhna Construction Company