ADDN/ ALTN TO SNCOS LIVING ACCN AT AFS BAGDOGRA UNDER GE (AF) BAGDOGRA

Amount

Dismantling water tank exc 500 ltrs and n.exc 1000 ltrs capacity and removing to store complete all as specified and directed.

S&F 1000 litres capacity rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I complete all as specified and directed.

S&F ball valve 20 mm dia high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball complete all as specified and directed.

S&F in repair, 20mm bore gate valve with iron wheel head screwed both ends for iron pipe and fixed complete all as specified and directed.

M&L for cutting chasing pinning in making good to facing where required for concealed water tubing etc n.exc 10 cm girth in brick wall complete all as specified and directed.

Taking down 15 mm bore steel tubing and connections including cleaning for re-fixing or removal from site complete all as specified and directed.

All as per item No. 6.00 above, but of 20 mm bore complete.

S&F 15mm bore uPVC pipe of pressure rating 10 Kgf/sqcm fixed to wall or ceiling or laid in floors incl fittings etc complete all as specified and directed.

All as per item No. 8.00 above, but of 20 mm bore complete.

Dismantling asbestos cement (corrugated, semi-corrugated etc) sheets in roof coverings including ridge complete all as specified and directed.

M&L for pre-painted galvalume aluminium zinc coating GI based corrugated or semi corrugated steel sheet 0.50 mm thick (BMT) of any colour having tensile strength of 550 Mps as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed.

M&L for pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick (BMT) of any colour having tensile strength of 550 Mps as in roof ridge, covering/cladding to wall fixed with self tapping screws or "J" hook complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description and any places complete all as specified and directed.

Dismantling framed timber scantling 40 Sqcm and over in section and in any position complete all as specified and directed.

Dismantling of timber scantling in fillets, rails, rafters, purlins etc under 40 Sqcm in section complete all as specified and directed.

M&L for second class hard wood in scantling wrought on sides framed complete all as specified and directed.

M&L for roof trusses (framed/ un-framed) for purlin, rafter, crane gantries, door frame, post, rails and fastening and heavy bracket etc (Beam, tee, angle iron or flat sections) including distance pieces, cleats etc confirming to Fe-290 (Gde-E-165) complete all as specified and directed.

M&L for preparation of new steel surface of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) of any description in any position not specifically provided complete including dismantling of floor tiles etc complete all as specified and directed.

M&L for RCC, M-25 (design mix) (using 20 mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, roof beam, landings, balconies, fascias, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M&L for TMT bar 6 to 8 mm, cut to length, bent to shape required, including cranking, welding where necessary, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, shelves landings, fascia and similar work; n.exc 200mm thick (horizontal or sloping) complete all as specified and directed.

Use and waste of formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, opening in concrete walls, floor and roofs, sides of RCC/PCC bands in walls, horizontal or sloping and similar works exc 5 cm but n.exc 10 cm wide for rough finished surfaces of concrete complete all as specified and directed.

M&L in repair, 110 mm bore PVC (SWR) pipe single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

M&L in repair, 110 mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F in repair, 75mm bore PVC (SWR) pipe single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F in repair, 75 mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F in repair, 110mm bore PVC (SWR) vent cowl complete all as specified and directed.

S&F in repair, 110 mm bore PVC (SWR) bend complete all as specified and directed.

S&F in repair, 75mm bore PVC (SWR) bend complete all as specified and directed.

S&F in repair, 110mm bore PVC (SWR) junction single (single T), equal or unequal complete all as specified and directed.

S&F in repair, 75 mm bore PVC (SWR) junction single (single T), equal or unequal complete all as specified and directed.

S&F in repair, PVC (SWR) floor trap plain with grating having dia meter of out let 75mm including jointing with solvent cement to waste pipe fixed in cement concrete, (1:2:4), type B-1 complete all as specified and directed.

Taking down cement plaster of any description on brick work or stone masonry walls including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

Demolition of brickwork built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M&L for brick work with sub-class 'B' bricks, straight or curved on plan to any radius built in cement mortar 1:6 complete all as specified and directed.

M&L for brick work with sub class ‘B’ bricks straight or curved on plan in CM 1:4 as in half brick thick walls complete all as specified and directed.

M&L for 15 mm thick rendering in CM (1:6) on fair faces of brick work or concrete surfaces on wall finish even and fair complete all as specified and directed.

M&L for 15 mm thick rendering in CM (1:4) on fair faces of brick work or concrete surfaces finished even and fair without using extra cement by weight of cement on wall complete all as specified and directed.

M&L for preparation of new surface applying two coats of oil bound distemper over a coat of alkali resistant primer over a coat of wall care putty 1.5 mm thick complete all as specified and directed.

M&L for preparation of new external plaster surface of wall and applying two coats of cement based paint over a coat of alkali resistant paint complete all as specified and directed.

M&L for complete removal of existing treatment of surface and applying 1.5mm thick Birla or equivalent wall putty to old plastered surface and applying two coats of oil bound distemper complete all as specified and directed.

M&L for preparation of plastered or unplastered old decorated surface of walls by brooming down or steel wire brushing scrapping down smoke spot moulds moss and efflorescent salts and treating oily & greasy spots and filling of holes and cracks with with suitable material like cement or plaster of paris etc and thereafter applying two coats of cement base paint complete all as specified and directed.

M&L for preparation of old painted wood or wooden based surface of any description not otherwise described exc 10 cm in width or girth and applying one coat of synthetic enamel paint white or tinted complete all as specified and directed.

M&L for preparation of old painted surface of steel of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Demolition of unreinforced cement concrete in ground flooring and paving n.exc 15 cm thickness below or above ground level complete all as specified and directed.

M&L for 75 mm thick PCC, (1:4:8), type D-2 (using 40 mm graded stone aggregate) as in sub base etc complete all as specified and directed.

M&L for chequered coloured cement concrete tile 30cmx30cmx25mm thick set, jointed and pointed in neat cement slurry with grey cement and pigment in floors over 20mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for 75mm thick PCC, (1:3:6), type C-2 (using 40 mm graded stone aggregate) as in plinth protection, laid in panels, finished the top surfaces even and fair without using extra cement complete all as specified and directed.

Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed.

M&L for machine cut kota stone slab flooring 20-25 mm thick over cement screed based laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including 20 mm thick screed bed in CM 1:6 etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified including rubbing and polish complete all as specified and directed.

M&L for kota stone slab 18-20 mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including 10mm thick rendering in CM 1:4 etc. set and jointed in neat cement slurry and pointed including rubbing and polish complete all as specified and directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.

M&L for joint free non-skid ceramic coloured tile 7 to 8 mm thick area of each tiles exc 0.18 sqm but n.exc 0.38 sqm, in floors laid over and including 15mm thick screed bed in CM 1:6 etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for joint free non-skid ceramic coloured tile 7 to 8 mm thick area of each tile exc 0.18 sqm but n.exc 0.38 sqm, in skirting/vertical surface laid over and including 10mm thick rendering in CM 1:4 etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for non-skid coloured ceramic floor tile of size of tile exc 0.11 but n.exc 0.18 sqm each 7 mm thick as in floor laid over and including 15mm thick screed bed in CM 1:6, set, jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for colour glazed ceramic wall tile of size 450x300x7mm thick on vertical surfaces laid over and including for rendering 10mm thick in CM (1:4) on vertical surface of wall cement screed bed set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for granite (of any type) tile 18-20 mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone laid over and including 15mm thick screed bed in CM 1:6, including grinding and polishing complete all as specified and directed.

M&L for 18-20 mm thick granite tile machine cut, in skirting/dado laid over cement mortar and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete over 10 mm thick rendering in cement mortar (1:4) on vertical surfaces for backing of tile complete all as specified and directed.

M&L for 25 mm thick cement concrete, 1:2:4, type B-0 (using 12.5 mm graded stone aggregate) as in sub floors etc incl finishing the surface even & rough to receive screeding complete all as specified and directed.

Taking down chowkhat or frame with shutters without taking of shutters from frames n.exc 1.5 sqm each incl making good disturbed portion complete all as specified and directed.

Taking down chowkhat or frame with shutters without taking of shutters from frames exc 1.5 sqm but n.exc 4.00 sqm each incl making good disturbed portion including removing to store complete all as specified and directed.

M&L for 1.25 mm thick pressed steel frame of size 125 X 60 mm for door with one or more rebate including necessary fixing lugs, stainless steel hinges, locks strike plate etc complete all as specified and directed.

M&L for PCC, 1:3:6, type C1 (using 20 mm graded stone aggregate) for holdfast blocks complete all as specified and directed.

M&L for preparation of new steel surface of any description, not otherwise described, over 10cm width or girth & applying two coats of synthetic enamel paint complete all as specified and directed.

M&L for powder coated aluminium sliding window shutters 25mm with frames (consisting of two Nos glazed shutters and one No gauze shutter) 3 track sliding shutters, duly fitted with neoprene beading glazing clip, locking device, heat absorbing glass 5 mm nominal thickness in glazed shutters, stainless steel wire mesh of 0.254mm nominal dia of wire and 0.95mm average width of aperture in gauzed shutter complete all as specified and directed.

M&L for powder coated anodized aluminium frame for doors, windows ventilations with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

M&L for powder coated anodised aluminium window and ventilator shutters side hung type without sash bar, aluminium sections weighing 0.55 kg/m including necessary joining, cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as hinges type B-21, 100 mm long (2 Nos) suitable handle 1 No complete all as specified and directed.

M&L for fabricated powder coated anodized aluminium grill of size 75x75 mm, using 6mm dia bars fixed to outer portion of chowkhat using U/V section runners complete all as specified and directed.

M&L for 4 mm thick one side frosted sheet glass ordinary quality and glazing in square n.exc 0.5 sqm in each pane fixed with neoprene rubber gasket in aluminium frame complete all as specified and directed.

M&L for 35mm thick second class hardwood factory made plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed.

M&L for 35mm thick second class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.20 (a); supplied and fitted to chowkats complete all as specified and directed.

M&L for preparation of new wooden surface of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staple including necessary beading complete all as specified and directed.

M&L for solid PVC door frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet reinforced with M.S. tube, supplying & fixing in opening as per specification & drawings complete all as specified and directed.

M&L for factory made solid PVC moulded door shutters 28 to 30 mm thick (stile:), with 2, 4 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face with particle board core complete all as specified and directed.

S&F 100 mm butt hinge, medium weight cold rolled, stainless steel and fixed complete all as specified and directed.

S&F 200mm long aluminium anodised tower bolts of extruded section and fixed complete all as specified and directed.

S&F 150mm long aluminium anodised tower bolts of extruded section and fixed complete all as specified and directed.

S&F 300mm long aluminium alloy anodised sliding door bolt with hasp & staple (bolt type) and fixed clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed complete all as specified and directed.

S&F 150mm size extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S&F 125 mm size extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S&F in repair, 300mm mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

S&F in repair, 25 mm outer dia medium weight pipe made out of stainless steel 304 grade, curtain rods fixed to walls complete all as specified and directed.

S&F stainless steel 304 grade clamps with ends/stops etc including other accessories for fixing arrangements of 25 mm dia curtain rod to wall complete all as specified and directed.

S&F in stainless steel 304 grade ornamental knobs for side of curtain rods including fixing arrangements complete all as specified and directed.

Dismantling ceiling board (fibre, pulp insulation) or insulation board/slabs etc including grid work/wooden or aluminium frame works, cover fillet etc complete all as specified and directed.

M&L for powder coated galvanised iron snap grid frame work of size 600 x 600 mm for false ceiling comprising of main runner 'T' section of size 38mm x 24mm x 0.40mm thickness, cross 'T' of size 29mm x 24mm x 0.3mm thickness and wall angle of size 24mm x 24mm x 0.43mm thick suspended with 4mm dia GI wire from purlin @ 1.20m c/c and fixed with 4mm thick designer ceiling boards complete all as specified and directed.

S&F in repair, CP toilet paper holder with flat recessed type stainless steel fixed to walls with chromium plated brass screws complete all as specified and directed.

S&F in repair, CP soap dish fixed to wall with screw complete all as specified and directed.

S&F in repair, brass chromium plated shower rose 125mm size with or with out swivel joints, any size including fixing to steel pipe or union complete all as specified and directed.

S&F in repair, 20 mm dia aluminium anodised tubular towel rail, 'D' type, 60 cm long between flanges fixed with brass screws complete all as specified and directed.

S&F in repair, chromium plated hand shower (health faucet), telephonic type with 8 mm dia, 1 m long PVC tube cover CP flexible with wall hook and jet of approved make, suitable for 15 mm bore iron pipes or for unions and fixed complete all as specified and directed.

S&F in repair, 15 mm bore chromium plated fancy type angle valve with elegant knob screwed down high pressure, with crutch or butter fly handle screwed for iron pipe or for unions complete all as specified and directed.

S&F in repair, 15 mm bore chromium plated fancy type stop cock (concealed type) with long shank and cup with elegant knob screwed down high pressure, with crutch or butter fly handle screwed for iron pipe or for unions complete all as specified and directed.

S&F in repair, 15 mm bore chromium plated fancy type long boby bib tap with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repair, angular two way angle cock with wall flange, 15 mm nominal bore cast copper alloy, chromium plated, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes or for unions and fixed complete all as specified and directed.

S&F in repair, 15 mm bore chromium plated fancy type pillar tap for WHBs with capstan heads, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F in repair, PVC connection 15mm dia and 450 mm long with 2 Nos PTMT nuts with washers complete all as specified and directed.

S&F in repair, PVC white low level flushing cistern 10 ltr capacity with all fittings syphonic action type with inlet ball valve and float, handle with & including bracket and PVC flush pipe 32 mm bore complete all as specified and directed.

S&F in repair, white vitreous china wash down water closet pan (pedestal) pattern and trap (excluding) fixing bolts, flushing cistern and flush pipe) including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe etc. complete all as specified and directed.

S&F in repair, plastic water closet sheet covers white closed pattern with flat bottom, with mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S&F in repair, vitreous china half stall urinal flat back, size of 600 x 395 x 365 mm white, with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) but including connection to flushing pipe and outgoing pipe complete all as specified and directed.

M&L for glass 6 mm thick heat strengthen glass with both side acid frost finish size 450 x 900 mm cut & finish and fixed on wall using SS 304 heavy L bracket complete all as specified and directed.

S&F urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (minimum weight 60gms) complete all as specified and directed.

S&F in repair, vitreous china wash hand basin (oval type) of size 550x400mm including one number chromium plated waste fittings, 32 mm dia, brass with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed, with & including 32 mm dia PVC waste pipe with connector, including cutting for and pinning in ends of brackets complete all as specified and directed.

S&F in repair, vitreous china squatting pan “ORISSA” pattern size 580mm x 440mm, white with 'P' or 'S' trap front or back inlet with integral foot rest (excl flushing cistern & flush pipe) & including connection to trap & to flushing pipe anti syphonage pipe etc complete including making good to floor complete all as specified and directed.

M&L for preparing surface of wood and wood based materials new or old of any description and girth not otherwise described and treated with creosote oil complete all as specified and directed.

Taking down carefully copper/aluminium point wiring complete (light, fan, plug point & power complete along with fittings (switches, ceiling roses, tube light fittings, bulk head fitting regulator, sockets, removing materials to store and offering credit & making good of disturb surfaces of wall/floors etc complete all as specified & directed.

M&L for Point wiring with 1.5 Sqmm (22/0.30mm) PVC insulated and unsheathed multistranded copper conductor cable, 1100 volts grade, ISI marked, FR type drawn through and including PVC casing caping/ PVC Conduit (ISI marked) and its accessories such as Tee, elbow, jointer, elbow corner etc. fixed on surface of walls, columns/ beams along with 1.5 Sqmm (nominal area) copper conductor cable (multistranded) PVC insulated and unsheathed as earth wire connected to common earth dolly at one end and metallic bodies of luminaire/ fan at other end including PVC folding boards with sunmica top for mounting switches, sockets, fan Regulators, accessories etc as per site requirement and all as specified & directed for one light point or one fan point controlled by one switch with cables 1.5 sq. mm size. Note:- Unit rate include for cutting chases for conduits and sinking for boxes and making good to wall, floors etc.

All as per ser item No. 111.00 above, but for One 5 Amp 5 pin socket outlet point on same board with other switches including earth wire complete all as specified and directed.

All as per ser item No. 111.00 here in before but for One 5 Amp 5 pin socket outlet point on independent board complete all as specified and directed.

All as per ser item No. 111.00 here in before but with 4.0 Sqmm (36/0.30mm) PVC copper stranded cable FRLS type for one 15 Amp 5 pin socket outlet point including PVC cable 4 Sqmm FRLS type copper stranded conductor as earth wire as specified & connected to common earth & earth terminals including boards for mounting purposes complete all as specified and directed.

S&F in repair, switch piano flush button 5 Amp, single pole, one way, 230 volts, white finish complete all as specified and directed.

S&F in repair, socket outlet flush type 5 pin, 5 Amp, multipurpose 230 volts, single pole, one way suitable for 3 pin/2pin, 5 Amp plug top white/ivory finish complete all as specified and directed.

S&F in repair, switch socket combination, flush type, 5 pin, 5 Amp, multipurpose 230 volts, single pole, one way suitable for 3 pin/2pin, 5 Amp plug top white/ivory finish complete all as specified and directed.

S&F in repair, switch socket combination multipurpose flush type, 2 in 1 type, (3 and 5 pin) 5/15 Amps, 230V, AC complete all as specified and directed.

S&F in repair energy efficient Street/ Roadway/ Building Security Luminaire LED fitting upto 35 Watt, 230V, AC outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete, including brackets and all accessories needed to fixed to the wall or pole all as per site requirement and complete all as specified and directed.

S&F exhaust fan, steel body, AC, single Phase, 230V of size 300mm sweep with blades, frame and louvers including suitable hole in existing wall complete as per site requirement and complete all as specified and directed.

S&F LED lights fitting 1x 20W, 220V, AC, decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

S&F in repair, surface and wall mounted LED batten 10 watt - 2Ft White with Aluminum housing & integrated electronic driver, high performance batten and efficacy should not less than 100 lumen/watt and complete all as specified and directed.

S&F in repair, stepped type electronic fan regulator, Socket type on the existing phenolic laminated sheet etc. as reqd complete all as specified and directed.

S&F in repair, ceiling rose surface PVC 50mm dia 3 terminals including PVC mounting block white/ivory finish complete all as specified and directed.

M&L in repair, sub main wiring with two single core PVC insulated unsheathed, multistranded flexible copper conductor 1100Volts grade, FRLS type, cables 10 Sqmm drawn through in and including rigid PVC heavy duty concealed conduits including 6 Sqmm 1100Volts grade, FRLS type, PVC insulated unsheathed multi stranded flexible copper conductor cable as continuous earth wire and connecting to common earth terminals complete all as specified and directed. Note:- (i) Two runs of cables and one run of continuous earthing cable drawn in conduit/ casing and caping will be measured as one length of sub main with colour code Red Black and Green. (ii) PVC conduit / casing caping and its accessories is deem to be included in this item rates. (iii) Unit rate include for cutting chases for conduits and sinking for boxes and making good to wall, floors etc.

S&F in repair, TPN distribution board 415 volts sheet metal enlosure double door shutter type factory made fixed flush with wall or outside on wall surface suitable for mounting isolators & MCB's 220 volts, 200 Amp rated bus bar with front openable cover suitable for TPN 4 ways MCB complete all as specified and directed.

S&F in repair, SPN distribution board sheet metal enlosure double door shutter type factory made fixed flush with wall or outside on wall surface suitable for mounting isolators & MCB's 240volts, 200 Amp rated bus bar with front openable cover suitable for SP & N 8 ways complete all as specified and directed.

S&F in repair, MCB SPN/DP 32 Amp rating 240V, 10KA 'C' curve complete with connection testing and commissioning all as specified & directed.

S&F in repair, MCB SP 6 to 32 Amp rating 240V, 10KA 'C' curve complete with connection testing and commissioning all as specified & directed.

S&F in repair, MCB TPN 16 to 32 Amp rating 415V, 10KA 'B' curve complete with connection testing and commissioning all as specified & directed.

M&L in repair, Earthing complete with galvanised steel earth plate electrode 60cmx60cmx6 mm thickness burried directly in ground (earth pit not less than 2.25mtr deep below normal ground level) with top edge of earth plate not less than 1.5 mtr below normal ground level connected to and incl galvanised earth lead wire of 4.00mm dia by means of nuts & bolts, check nuts and washers of galvanised incl PCC pit of 1:2:4, type B-1, cover reinforced with XPM weight not less than 4 Kg/Sqm and 6mm dia bar handle, earth pit angle iron frame of size 25mm x 25mm, excavation and earth work in any type of soil, charcoal dust, salt, light grade GI watering pipe 20mm dia with funnel and wire -mesh and medium grade GI protection pipe of 15mm bore from top edge of earth plate upto main distribution board complete all to as shown in electrical plate No 3 of MES Sch 2009 (Part I) connected main switch board all as specified and testing on completion.

NOTES :- 1. The amount of schedule of credit shall be deducted from the total of this BOQ for arriving at contract sum.

M/S IDEAL CONSTRUCTIONS (BID ID -3199046)

HALDER ENTERPRISERS (BID ID -3197955)

SUNIL DAS AND CO (BID ID -3198987)

M/s Chakraborty Enterprise (BID ID -3199041)

SHRI P P SHARMA (BID ID -3195449)

M/S MANAS MITRA (BID ID -3197459)

BUILDERS ASSOCIATE (BID ID -3195010)

M/S SWAPAN KUNDU (BID ID -3197671)