REPAIRS TO FLOOR AND WALL, PLASTERING PLUMBING WORKS AND SANITARY FITTINGS AND REPAIRS AND CLEANING OF OH TANK UNDER AGE BR I AT INS SHIVAJI LONAVLA

Amount

Dismantling floor, hearth or wall tilling including cement mortor bedding (but not backing), removing serviceble tiles to store and rubbish off the premises complte all as specified.

Demolition of stone slabs and tiles of any description or thickness in floor aprons etc laid bedded and pointed in any mortor complete all as specified.

Demolition of cement concrete (unreinforced) in sunken floors and in any description

Dismantling of existing water proofing treatment treatment consisting of cement mortar,tarfelt and foreign materials etc incl cleaning the surface and removal of dismantled materials outside MD land as direted by the Engr-in-charge.

M&L for Coloured Non Skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 20 mm thick screed bed in CM 1:6

M&L for Coloured Non Skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 20 mm thick screed bed in CM 1:6

Ditto all as per item No. 06 above but in skirtings /dado and verical surfaces over and including 10 mm thick backing coat cement plaster in CM 1:4

M&L Vitrified Ceramic tiles 10 mm thick (square/ rectangular) light shade polished, area of each tile not exceeding 0.36 sqm, in floors etc set & jointed in neat cement slurry & pointed in white or coloured cement to match.over and including 20 mm thick screed bed in CM 1:6

Ditto all as per item No. 08 above but in skirtings /dado and verical surfaces over and including 10 mm thick backing coat cement plaster in CM 1:4

M&l for Glazed ceramic tiles of any colour in vertical surfaces 300 x 600x 7 to 9mm/ 450 x 300 x 7 to 9 mm thick mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick backing coat cement plaster in CM 1:4

M&l for Glazed ceramic tiles of any colour in vertical surfaces 350 x 250x 7 mm/ 450 x 350 x 7 to 9 mm thick mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick backing coat cement plaster in CM 1:4

M &L for 20 to 25 mm thick machine cut, hand dressed kota stones in floors over cement screed base laid and jointed with grey cement slurry mixed with pigments to match the shade of slab including rubbing and mirror polishing etc complete.over and including 20 mm thick screed bed in CM 1:6

M &L for 18 to 20 mm thick machine cut, hand dressed kota stones in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigments to match the shade of slab including rubbing and mirror polishing etc complete.over and including 10 mm thick backing coat cement plaster in CM 1:4

M&L for 18 to 20 mm thick Granite (of any type) work in single piece (table rubbed and polished) in steps, floors, window- cills,cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade over and including 20mm thick CM (1:6) bedding layer complete all as specified and as directed.

Cement concrete type B-1, 1:2:4 (20 mm graded aggregate) 25 mm thick as levelling course complete all as specified.

M&L for preparation of existing kota stone flooring at any position and polishing with machine to surfaces in two steps (1st step with rough stone & 2 nd step with fine stone and pointing of joints to match the colour of kota including treating the surface with bees wax polish complete all as specified and as directed.

Demolition of Brickwork or stone/bou-lder masonry, built in Cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles

M&L for Brickwork with Modular bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 in narrow widths including Cutting out bricks/stone, for- ming toothing for, and bonding new into old brickwork /stone masonry

Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc.

M&L for Dubbing out average 10mm thick on irregular face of walls in CM 1:6

M&L for 5mm thick rendering in cement mortar 1:3 on ceiling finished even and smooth without using extra cement all as specified and directed.

M&L for Rendering 15 mm thick CM 1:6 on fair faces of brick work or concrete surfaces and to be finished even and smooth(without using extra lime or cement)

M&L for Rendering 15mm thick cement plaster in CM 1:4 on brick work/concrete surfaces finished even and smooth with WPC all as specified and as directed (Note : WPC will be measured and paid separately)

Supply Integral Water Proofing Compound

M & L for rendering 20mm thick cement plaster (1:6) on stone masonary surfaces complete all as specified

M&L for preparation of new plastered surface of ceiling surface and applying three coats of white wash etc all as specified and directed.

M&L for Preparing newely plastered surface and primng with alkali resistant priming paint and applying 2 coats of oil bound distemper on walls over 3 mm thk wall care putty

M&L for Preparing newely plastered surface and primng with alkali resistant priming paint and applying 2 coats of antifungal weather proof paint exterior grade emulsion paint complete all as specified and as directed.

M&L for preparation of old plastered surfaces of walls and applying one coat of oil bound distemper on the walls etc complete all as specified and directed.

M&L for 15mm thick plastering over the newly laid screed concrete and side walls of sunken portion in CM 1:3 mixed with polypropylene fibres (Micron-B) of approved quality @ of 125 gms per bag of cement or as per manufacturers specification alongwith water proofing compound of approved quality @ 1kg per bag of cement including rounding of all corners wherever required, smooth, rendering, curing etc complete and as per instructions of Engineer-in-Charge.

M&L for applying 2mm thick heavy duty acrylic polymer modified cementitios water proofing coating of Nitocote CM 210 (Make : Fosroc/Dr Fixit including cleaning, repair of all cracks complete all as specified and directed.

M&L for 40mm thickness screed concrete (1:1.5:3) inside sunken slab laid to slope (using 12mm graded aggregate) finished, curing including checking the joints of pipe lines and rectifying any defects within sunken portions, cleaning the surface with air and water jet and also providing 40mm thick PVC spouts 45cm long in external wall as directed by Engr-in-Charge.

M&L for plain cement concrete, Type E-2, 1:5:10 mix (Using 40 mm graded brick aggregates) for filling in sunken floor and mass concrete complete all as specified and as directed.

M&L for 50mm thick PCC 1:2:4 type B0 (using 12.5mm graded stone aggregate) as padding concrete over lean concrete all as specified and as directed

Dismantling of cast iron/PVC or reinforced concrete drain pipes, jointed in cement mortor anf taking out of trenches if required 100/75 mm internal dia pipe complete all as specified.

S&F PVC (SWR) pipes of dia 110mm bore single socketed in any length with rubber ring joints fixed to walls.

S&F PVC (SWR) pipe of 75 mm bore in single socketed in any length with rubber ring joints fixed to walls..

S&F PVC (SWR) bends of 75mm dia bore

S&F PVC (SWR) bends of 100 mm dia bore

S&F PVC(SWR) vent cowl of 75 mm dia bore.

S&F PVC(SWR) vent cowl of 110mm dia bore.

S&F PVC (SWR) branch piece, single (single Y) equal or unequal 75 mm dia

S&F PVC (SWR) branch piece, single (single Y) equal or unequal 100 mm dia

S&F PVC (SWR) branch piece, single (double Y) equal or unequal 75 mm dia

S&F PVC (SWR) branch piece, double (double Y) equal or unequal for 100 mm dia

M & L PVC Nahani trap100mm size with grating including jointing to waste pipe fixed in cement concrete type type B1 (1:2:4)

S&F PVC Bottle trap having minimum water seal of 25mm (Minimum weight 32mm-260gms/40mm-270 gms) of 32 mm dia, complete all as specified and as directed.

S&Fin repairs vitreous china wash basin, white, flat back, size 580mm X 450mm including pair of CI brackets, waste fittings, brass chromium plated with long screwed shanks and fly nuts including cutting for and pinning in ends of brackets, 32mm bore flanged end bedded in red lead cement and other end fixed with & including 15mm bore pillar tap, cast copper alloy, fancy type, chromium plated, screwed down high pressure complete all as specified and directed.

S&F in repairs Vitreous china squatting pan, `Orissa' pattern, size 580 x 440 mm white, with integral foot rests including connection to trap, and to flushing pipe anti- syphonage pipe, complete all as specified.

S&F in repairs Vitreous China wash down water closet pan (pedestal pattern) white with trap including plastic water closet seat, white, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device and connection to drain (or outgoing pipe) and to flushing pipe, anti syphonage pipe, fixing bolts (excluding flushing cistern and flush pipe) complete all as specified and as directed.

S&F in repairs for vitreous china urinals half stall type, white including providing and fixing plugs, bedding urinal against wall in cement mortor (1:2), securing urinals to plugs with and including 60mm long brass screws, pointing around urinal back in cement, flush pipe, spreader,grating and union for discharge pipe complete all as specified and as directed.

S&F in repairs 10 Litre capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including pair of CI brackets complete all as specified and as directed.

S&F Flush pipe of polyethylene of low or high density or PVC, 32 mm dia, for low level cistern, including taking down old flush pipe complete all as specified and as directed.

S&F Bib taps 15 mm dia, fancy type chromium plated screwed down, screwed for iron pipe or for brass ferrule and fixed for 15 mm dia pipe fixed in repairs

S&F Stop valves 15 mm dia, fancy type chromium plated, screwed down, high pressure, screwed both ends for 15mm dia pipe or for unions fixed in repairs

S & F PVC connection 15 mm size with PTMT nuts of length 450 mm complete all as specified.

S & F in repairs, brass Chromium plated shower roses with or without swivel joints, 125 mm size including fixing to steel pipe or union complete all as specified and as directed.

S&F in repairs hand shower (Health Faucet), chromium plated with 8mm dia, 1.00m long flexible tube with wall hook complete all as specified and as directed. Cat No:- ALD - 573 of Jaquar or equivalent model Manufactured by Esess/ Marc.

S&F in repairs Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed

S&F in repairs stainless steel soap dish (heavy duty) of size 200x100 mm fixed to plugs with brass chromium plated screws complete all as specified and as directed

S&F 20mm dia towel rail chromium plated 60cm long including bracket

S&F in repairs drapery rod in any length, high strength MS pipe with corrugated PVC extrusion having outer dia 28 mm including decorative finals of steel powdercoated in matching colour of drapery rod all as directed by Engr-In-charge.

Taking up or down steel tubing 15 mm and connection, including cleaning for refixing or removal to store complete all as specified.

Taking up or down steel tubing 20mm and connection, including cleaning for refixing or removal to store complete all as specified.

Taking up or down steel tubing 40 mm and connection, including cleaning for refixing or removal to store complete all as specified.

S&F GI tubing 15mm bore medium grade with all fittings and fixed to wall and ceiling o laid in floors complete

S&F GI tubing 20mm bore medium grade with all fittings and fixed to wall and ceiling laid in floors complete

S&F GI tubing 40mm bore medium grade with all fittings and fixed to wall and ceiling laid in floors complete

S&F CPVC pipes, SDR 11, 40 mm outer dia of pressure rating 6 kgf/sqcm conforming to IS-15778 with all fittings such as Tee,Bends, elbows ,unions ,sockets and end pieces etc to receive fittings and fixed with solvents fixed to walls with all clamps in Shafts/ducts with all necessary scaffolding to fix the pipes and testing the joints under prescribed pressure

All as per item no 69 above but 25mm dia pipe

All as per item no 69 above but 20 mm dia pipe

Dismantling PVC water tanks capacity Exc 250 & n exc 500 and removing to store

Dismantling PVC water tanks capacity Exc 500 & n exc 1000 and removing to store

Dismantling PVC water tanks capacity Exc 1000 & n exc 2000 and removing to store

S&F Rotational moulded polyethylene water storage tanks (cylin-drical vertical with closed top) 500 ltrs capacity hoisted and fixed in position all as specified

S&F Rotational moulded polyethylene water storage tanks (cylin-drical vertical with closed top) 1000 ltrs capacity hoisted and fixed in position all as specified

S&F Rotational moulded polyethylene water storage tanks (cylin-drical vertical with closed top) 2000 ltrs capacity hoisted and fixed in position all as specified

S&F ball or float valve 40mm brass high pressure with polythene float and fly nut etc complete fixed in repairs.

S&F ball or float valve 25 mm brass high pressure with polythene float and fly nut etc complete fixed in repairs.

S&F ball or float valve 20 mm brass high pressure with polythene float and fly nut etc complete fixed in repairs.

S&F ball or float valve 15 mm brass high pressure with polythene float and fly nut etc complete fixed in repairs.

S&F gunmetal gate valves 40mm bore with iron wheel head ,screwd both ends for iron pipe fixed in repair

S&F in repairs High density polythylene (HDPE) pipes 50 mm dia, of pressure rating 6 Kg/sq cm, fixed to walls, ceilings or in floors complete all as specified and as directed.

Cement concrete type C-2, 1:3:6 (40 mm graded aggregate 75 mm thick as as in plinth protection complete all as specified.

Taking down chowkats or frames N.exc 1.5 Sqm with shutter (without taking of shutter from the frame.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing

Factory made solid panel pvc door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S&F 100mm butt hinges, stainless steel medium weight fixed with stainless steel screws.

S&F aluminium handles cast type anodised 125mm size.

S&F aluminium anodised barrel tower bolts of extruded section and fixed 150 mm size.

S&F aluminium alloy anodised sliding door bolt with hasp staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of sextruded sections or cast aluminium alloy and fixed 250mm length.

S&F aluminium powder coated ventilator partly fixed and partly louvered type without sash of bars, section as per designation 63400 of IS 737, frame and intermediate made out of aluminium section of size 50.80 x 25.40 x 0.95 mm (Catalogue No 14027 of M/s Jindal) including necessary heavy duty louvers (adjustable with locking arrangements), jointing clips, rubber packing, anodised snap beading, screws alongwith 4.00mm thick pin headed glass for louvers and glazing etc complete all as specified and as directed. Note:- (i) The thickness of the powder coating shall not be less than 0.5 micron. (ii) Sealing the gap of frame with Jamb and Cill (alround) using silicon gel at the rate of 0.05 lit/m for both faces of window.

M&L for cleaning of RCC Water tank at any height (on accessible/inaccessible roofs) by removing all scale, dirt, mud ,any foreign material, accumulated silt, other dirty substance,algae, fungus and other bacterial material from sides/bottom of tank by draining / pumping out water/sludge and other growth from wall / floor / roof by high pressure cleaning method with jet set, vaccum machine and again cleaning the tank with fresh water. and disinfecting the tank by using UV radiator and approved chemical (chloriten) for RCC water tank of capacity exc 500 Lit but not exc 1000 litres capacities of tanks complete all as specified and as directed. Note:- (i) Unit rate quoted shall include for necessary ladder and machinery for pressure cleaning and safety apparatus required for execution of work. (ii) Unit rate quoted shall include for writing the date of actual cleaning with white paint on black background to match with the existing.

All as per item No.94 but for RCC water tank of capacity exc 1000 Lit but not exc 2000 litres.

All as per item No.94 but for RCC water tank of capacity exc 2000 Lit but not exc 5000 litres.

Cleaning of PVC Water tank at any height ( on accessible/inaccessible roofs) by removing all scale, dirt, mud ,any foreign material and removing accumulated silt, other dirty substance, algae, fungus and other bacterial material from sides/bottom of tank by draining / pumping out water/sludge from bottom and other growth from wall/ floor by high pressure cleaning method with jet set, vaccum machine and again cleaning the tank with fresh water and disinfecting the tank Disinfecting by using UV radiator and approved chemical (chlorien). for PVC water tank of capacity not exc 500 litres capacities of tanks complete all as specified and as directed. Note:- (i) Unit rate quoted shall include for necessary ladder and machinery for pressure cleaning and safety apparatus required for execution of work. (ii) Unit rate quoted shall include for writing the date of actual cleaning with white paint on black background to match with the existing.

All as per item No.97 but for PVC water tank of capacity exc 500 ltrs but n exc 1000 litres.

All as per item No.97 but for PVC water tank of capacity exc 1000 ltrs but not exc 2000 litres.

M&L for preparation of old painted surfaces of any des-cription, over 10cm in width or grith and applying two coats of synthetic enamel paint

M&L for writing letters or figures (Block, Roman, Italic or Indian) n exc 30 cm high complete all as specified

M&L for writing stops, commas, short lines, dashes, hyphens, brackets, etc complete all as specified

Removing building materials such a sbricks ,stones, sand etc to a distance upto 15 Km , beyond the lead included in the rates, including loading, unloading and stacking at the destination

RK AND SONS CREATION

SAI SAMARTH ENTERPRISES

seema enterprises

M/s S.D Construction Co

Chandrama Construction