SPL REPAIRS TO ROAD IN TOWER COLONY, SHIVAJI PARK AND DOGRA LINE, ESH ROADS IN NORTH AREA AND REPAIR TO ROAD AND ROAD FURNITURE INCLUDING PAINTING AT CERTAIN LOCATIONS OF SOUTH AREA AT NASIRABAD UNDER GE NASIRABAD.

Amount

Repair to pot holes any depth, n.exc. 1 Sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc, cutting around edges to atleast 25 mm in depth, making good by filling in screened & graded road metal , watering and well ramming ( including supply of road metal ) complete all as per specified and directed.

Preparing old bituminous surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc, applying evenly a tack coat of paving bitumen VG-30 @5 Kg per X Sqm and laying bituminous premix asphaltic semi dence concrete 30 mm consolidated thickness with 5.5% binder content by weight of total mix, rolled and compacted with 8 to 12 tonne power roller to required camber and gradient and rolled to a uniform smooth surface complete all as per specified and directed.

M&L for moorum / red bajri filling in floors or pavings laid in layers n.exc. 15 cm thick spread, levelled, watered, rolled and consolidated to required gradient and camber with 0.20 to 0.50 tonne hand operated roller complete all as per specified and directed.

S&F in repair 100 mm thick sand stone kerb of roughly rectangular stones not less than of size- length 60 cm and width 30 cm, dressed so that the maximum depression from a straight edge held against the dressed surface shall not exceed 6 mm for top and exposed surfaces of sides and 20 mm for the rest of surfaces jointed in CM ( 1:6 ) and struck flush complete all as per specified and directed.

S&F in repair Solar Stud / strobe light glowing size 125 mm x 60 mm ( shank 60 mm ) complete all as per manufacturer instruction and directed. Make: Model no DHRUV of Dark Eye / Tata BP Or Equivalent.

M&L for road line painting 100 mm wide with golden / yellow / white thermoplastic compound with reflectorised glass beads on road providing and laying of hot applied thermoplastic compound 2.0 mm thicks including reflectorised glass beads and 250 gm per Sqm area, thickness of 2.0 mm is exclusive of surface applied glass beads as per IRC 35, including cleaning of old road marking paint, the finished surface to be levelled, uniform and free streaks and holes in addition where arrows of letters are to be provided thermoplastic compound should be machine sprayed and the colour of compound, complete all as per specified and directed.

Dismantling of stone slab and tiles of any description or thickness in floors, aprons etc complete all as per specified and directed.

S&F in repair Guide Post solar delinators with & including high quality LED flashing light ( four ultra bright flashing LEDs ) mounted on MS pipe of 50 mm duly powder coated, anti rust and anti theft steel net complete fixing including necessary excavation, PCC etc. required complete all as per specified and directed. Make: Dark Eye model No DA 112 or Equivalent model of TATA BP/3M

Excavating in post holes ( Or similar holes ) each n.exc. 0.5 Cum getting out in soft / lose soil returning, filling in and ramming earth in layers n.exc. 25 cm, watering and removing surplus soil to a distance n.exc. 50 m and making good surfaces complete all as per specifed and directed.

M&L for PCC type D-2 ( 1:4:8 ) ( Using 40 mm graded crushed stone aggregate ) in foundation, filling & mass concrete complete all as per specified and directed.

M&L for 1.65 mm thick and 50 mm bore ( Outer dia 60.3 mm ) stainless steel pipe of schedule 5 S for sign boards complete all as per specified and directed.

S&F informatory sign board in required size and each sign board made of two 4 mm thick aluminium composite panel ( ACP ) both side face to fully covered with 3M scotchlite brand intensity prismatic grade retro-reflective sheeting as per ASTM D 4956 Type IV in required colour. The retro-reflective sheet shall be processed on ACP by 3M equipment heat lamp vacum applicator and letter, signs and symbol shall be cut by computerised plotter or digital printed on retro-refective sheet with high quality eco solvent digital Roland and fabricated out of high intensity prismatic grade sheeting with text matter ( as required ) and border of same sheeting. Sign board shall be supplied along with supported circular hollow stainless steel section frame of size 25 mm x 25 mm x 1.29 mm thick along with proper clamping with same section of stainless steel and nut bolts / welding, complete all as per specified and directed.

M&L for repair to potholes any depth, n.exc. 4 Sq m each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 75 mm in depth, making good by filling in screened and graded road metal, watering and well ramming ( including supply of road metal ), complete all as per specified and directed.

Notes for item No 2:- (i) Only minus price variation in qty of binder obtained from design mix shall be adjusted through minus price Rs 44/per kg of qty of binder. No adjustment for plus variation in qty of binder shall be admissible. (ii) Cost of testing charges, materials and transportations etc for job mix formula shall be inclusive in the unit rate and no extra payment shall be admissible on this account. (iii) Mix shall be obtained from hot mix plant and spreading shall be done by using mechanical paver and materials shall be transported in tipper (covered).

Note for all items: All items executed as per specified and directed by Engr-in-charge.

MADAN MOHAN JAIN sons

M/s ESS KAY Construction