The work of installation of addiional DT/increasing capaity of DTs and replacement of damaged UG cable of 11 KV Bhooragarh Feeder and shifting of 11 KV OH to UG under EUDD, Banda (Business Plan 2024-25)

The work of erection of additional DT/increasing capacity of DTs and replacement of old/damaged UG cable of 11 KV Bhooragarh Feeder at Near Ken River and shifting of 11 KV Feeders (Bhooragarh, Mataundh, Industrial, Jalsansthan, Mandi Samiti, Namami Gange) OH line to UG lines due to danger area (Store Banda) UNDER BUSINESS PLAN YEAR 2024-25 under EUDD, BANDA, including carriage of all required material from E.S.C., BANDA to work site, alongwith its loading, unloading & dragging at the respective ends and also carriage of old/damaged scraped material/TFs from site to store centre, if any. All works like erection, fixing, installation, laying & grouting etc. shall be done by firm as per direction of Engineer incharge/RESSPO manual. During the erection of lines/poles has to be done including cartage. Various type petty materials/work, which are not mentioned in scope of work, but actual required has to be arranged by contractor at his own cost. No extra payment will be made to such petty requirement. Details of the work as given below :-

SUPPLY OF MATERIAL -

Stone Pad

GI PIPE 6 INCH DIA (3 Mtr. each)

MS Top Channel

MS Dropper Channel

Clamp with Nut-Bolts for Channel

Cross Bracing MS Angle 65x65x6 mm, 4300 mm with 4 Clamps & Nut-Bolts.

MS Base Angle 65x65x6 mm, 2028 mm

Danger Board with clamp & Nut/Bolt

Number Plate with clamp & Nut/Bolt

PG Clamp for Dog

GI Barbed Wire

Alluminium Tape

Nut, Bolt & Washer of suitable sizes

ERECTION WORK -

Erection & fixing of ST Pole 11.0 Mtr. Long as single/double pole structure with HT/LT fittings.

Erection & fixing of GI PIPE 6 INCH DIA (3 Mtr. each)

Erection & fixing of Stone Pad

Erection & fixing of MS Top Channel

Erection & fixing of MS Dropper Channel

Erection & fixing of Clamp with Nut-Bolts for Channel

Erection & fixing of Cross Bracing MS Angle 65x65x6 mm, 4300 mm with 4 Clamps & Nut-Bolts.

Erection & fixing of MS Base Angle 65x65x6 mm, 2028 mm

Erection & fixing of 11 KV Pin Insulator

Erection & fixing of 11 KV Pin with nut

Erection & fixing of Disc Insulator

Erection & fixing of Disc fitting

LAYING OF 11 KV 3x185/3x300 Sq.mm. Al. Cable XLPE BY HDD MACHINE ON HDPE PIPE. THE WORK INCLUDES COST OF COMMISSIONING OF 11 KV CABLE JOINTING KITS AND MAKING ALL SUITABLE ARRANGEMENTS TO GET THE WORK DONE. CABLE HOISTING AND MAKING LOOPS AT BOTH ENDS ARE ALSO INCLUDES IN THE WORK.

Laying, sagging, stringing, binding and jumpering etc. of ACSR Weasel Conductor on the erected pole as per direction of supervising engineer/RESSPO manual.

Erection & fixing of 11 KV TPMO

Erection & fixing of 11 KV Fuse Set

Erection & fixing of Danger Board with clamp & Nut/Bolt

Erection & fixing of Number Plate with clamp & Nut/Bolt

Erection & fixing of PG Clamp for Dog

Erection & fixing of Barbed Wire

Erection & fixing of GI Wire 6/8/10 SWG for guarding

Erection & fixing of Alluminium Tape

Erection & fixing of Stay Set Complete

Erection, filling & fixing of Cable Jointing Kits

EARTHING OF POLE BY EARTHING ROD

Safe cartage & installation of 100 KVA Transformer on double pole structure with loading and unloading of both sites in proper alignment as per direction of Engineer incharge/RESSPO manual.

Concreting/Grouting of erected 8.5/11 Mtr. long PCC/STP Poles with muffing as per direction of Engineer incharge/RESSPO manual. The support shall be grouted with cement, sand and brick ballast /stone ballast in ratio 1:4:8 (0.285 Cu. Mtr. each), including the cost of arrangement of cement, sand, brick ballast/stone ballast, stone pad etc. as per actual site requirement. (arrangement of grouting material by firm).

M/s APOORWA ELECTRICALS

ARABH ELECTRICAL