E-Tender for Out Door LED Wall, Music System, Decorative Lights And allied works

Amount

Double arm downside Coral use Oran Furrow Floran Lighting Pole,Ht.3500

P & F of3500mm heightDACoral Florien polemadeofcircularmildsteelpipe of two sections (grade YST 210), Bottom section MS Plain pipe114 mmDiax3.6mmthickwith 1000mmHeight&Top section MSFlutedpipe 76 mmDiax2.9mmthickwith 2000 mm ,Decorative base made of Gravity Die-cast aluminum (436mm Dia x480mm Height). Decorative Die-cast Aluminum cone (169mm Dia x90mm Height) covered on the both section joint area. The double armcoralumeornabracket splitconstructedtype, BracketstemmadeofMS Pipe 60mm Dia x 2.6mm thick emerging from a Gravity Die-castaluminumembellishmentuptoalengthof500 mmcrowned attopwitha gravity die-cast aluminum decorative tomb of 202mm height. Theartistically curved double arm made of MS Pipe 32mm Dia x 2.3mmthick, spruced up with MS Scroll with leafy embellishment at center, isfirmly held to the stem through welded rectangle pipe bearing the armwith spherically formed tip at the open ends and the other endfacilitates the fitment of luminaries at 670mm on either side from the 1vertical axis of the bracket stem. Wind speed considered in design 50 m/sec in compliance with IS 875Part 3 : 1987. Pole section welded by certified welders using high endMIG welding processes. PDC aluminumservice door 348mm height x110mm width shall be provided with the company logo embossed onthe bottom of the door and safety rope with IP protection rating.Thecontrol gear tray is prewired with 2.5 Sq.mm cable,6A MCB and 32Aterminal connectors for loop-in / loop-out arrangement. Any otherinternal cables and connections shall not be covered in the scope ofsupply.Mildsteelmountingplate250mmSquarex10 mmthickSteelofgradeE250toIS2062:2011with4elongatedholes38x19tosuitM16x 500mm bolts of grade 4.6 at CC180. This mounting steel plate alongwith foundation bolts of suitable size to be used for ensuring firmgrouting into the specially designed foundation.All dimension andweight are within +/- 5% tolerance. The pole is coated with purepolyester powder coating or epoxy zinc phosphate primer and finisheducing environmentally stable polyurethane based paint (coatingthickness60-80microns).ThePoleshallbeprovidedwith Graphite grey

/Anthracite /grey/Blackas standardcolor

Conicalshape LED fixture With 50 W LED, Dimension:approx. 450 mm gradually reducing diameter& 400mm height, Wattage: 50W LED. LED 3000K, 4000K, 6500K 240Vac CRI >80 step 3 Input power : 50W Distribution 360° Electronic driver ON/OFF CE and BIS LUMINAIRE TYPE Light Column. IP rating IP65 MATERIAL CHARACTERISTICS Die cast aluminum top cover, Gravity die cast aluminum (LM6 Grade) supporting arm integrated with die-cast aluminum base (LM6 Grade) suitable for mounting Ø60mm OD pipe. SS fasteners. Pure polyester powder coated process: Acid treatment & pure polyester powder coating. LIGHTING PERFORMANCE Translucent acrylic diffuser of 2.7mm thickness with controlled downward light emission. Lamp fixed position. This luminaire contains built-in LED modules. LED modules are engineered accordingly to the existing regulations of Lumen Maintenance (LM80) and Technical Memorandum (TM21), Lifespan of the luminaire > 60,000 hours at 40°C. Operating ambient temperature range is from -15°C to +50°C. Driver efficiency >85%, power factor >0.9, THD

P &F of Extruded aluminum housing and die-cast aluminum end caps wall washer light18watt,IP66 protection, Impact resistance: IK05 ,1000 mm in length

P &F of Spike Light, Dimension: 113 x Ø73 x 451, Wattage: 12W LED. Supply of spike light LED 3000K, 4000K 240Vac CRI >80 Macadam step 3 Input power : 12W Dimension 113 x Ø73 x 451 mm Beam Angle : 15° / 25° / 40° Electronic driver ON/OFF CE and BIS LUMINAIRE TYPE Wall Mounted luminaire. IP rating IP66 MATERIAL CHARACTERISTICS Die- Cast aluminum housing& Front ring. Surface mounting spike made of Polypropylene black. Silicone clear gasket. SS fasteners. Mechanical resistance IK06. Pure polyester powder coated process: Acid treatment & pure polyester powder coating. LIGHTING PERFORMANCE Toughened Clear glass diffuser of 4mm thickness. This luminaire contains built-in LED modules. LED modules are engineered accordingly to the existing regulations of Lumen Maintenance (LM80) and Technical Memorandum (TM21), Lifespan of the luminaire > 60,000 hours at 40°C. Operating ambient temperature range is from -15°C to +50°C. Driver efficiency >84%, power factor >0.95, THD <10%, Surge protection 2.5KV

P & Fof 4 way UP DOWN Light 8w LED, IP65 WATER PROOF (sample to be approved by site in charge engineer)

P & F of Lamp Light 18w LED, IP65 WATERPROOF (sample to be approved by site in charge engineer)

P & Fof Spherical gate column top post Light(approx 300 mm dia) LED, IP65 WATERPROOF (sample to be approved by site in charge engineer)

P & Fof profile Lightin arches of front elevation LED, IP65 WATERPROOF (sample to be approved by site in charge engineer)

SITC of 250 LPHCommercial RO plantComprisingRaw Water Feed Pump, Pressure Sand Filter (PSF),Activated Carbon Filter (ACF),Anticipant Dosing System, Micron Cartridge Filter, High Pressure Pump, Reverse Osmosis System(including electric panel,membrane,basems skid),upvc pipe fittings (Detailed technical specification attached in the tender document) Approved Brands:- Kent Ro/HAVELLS/HI-TECH NOTE:-Bidder must have OEM /OEM CHANNEL PARTNER authorization letter for supply of this product

Control 25- 1 (JBL MAKE) SPEAKER Compact Indoor/Outdoor Background/Foreground Speaker with mounting accessories (speaker must be waterproof & weather protected as per outdoor application)

P3 OUTDOOR LED DISPLAY WITH MOUNTING STRUCTURAL STAND OF SUITABLE HEIGHT AS PER SITE REQUIREMENT (WITH MINIMUM 2 YEAR WARRANTY PERIOD) :- Display size 8ft H x 10ft W , pixel pitch 3.076 mm or below , configuration SMD1415 3-in-1 LED, pixel density 105625dot/m2 or more, Brightness calibrated 4500 cd/m2 or more, Refresh rate 1920HZ or more , frame rate 60HZ, signal processing depth 16384, colors 281 trillion or better, Horizontal viewing angle H=160˚ OR more, Vertical viewing angle V=140˚ OR more, Service life 100000 hour or more, power input AC 100-240V, Max power consumption 684w/m2 or lower, temp range -20˚ to +60˚ c, Humidity 10-80% no condensation, service access rear,IP grade 65, LED tile/cabinet should becalibrated before supplied& after installation also, calibration should also be performed as and when it is required during warranty period, offered product which do not support dot calibration shall be rejected, OEM of LED display should provide details of luminance meter with model no & purchase date,

INTERNATIONAL SAFETY CERTIFICATION BIS REGISTRATION AS PER STANDARD IS:13252 (PART 1) MANDATORY TO SUBMIT ALONG WITH BID:- offered model BIS certification should be on the name of OEM brand/OEM Subsidiary, valid BIS certificate should be provide for LED tiles/cabinet, offered model should be clearly mentioned in the BIS certificate, This certificate shall be submitted at the time of bid APPROVED BRANDS:- BARCO/GKGD/MITSUBISHI/DELTA NOTE:-Bidder must have OEM /OEM CHANNEL PARTNER authorization letter for supply of this product Supply of 50 mtr HDMI 4K Cable Make:- Sony / Bestnet

Supply of 500 WATTS High Wattage PA Mixer Amplifier Power output:- 750W Max., 500W RMS at 10% THD, 450W RMS at 5% THD, 415W RMS at 2% THD Output Regulation:- ≤ 2 dB, no load to full load at 1kHz I/P channel:- 7 × Mic 0.8mV/4.7kΩ, 2 × Aux 100mV/470 kΩ, 1 × Line 1V/50kΩ Frequency Response:- 50-15,000Hz ±3dB Signal to Noise Ratio:- 60dB Tone Controls:- Bass: ±10dB at 100Hz, Treble: ±10dB at 10kHz Speaker Outputs:- 4Ω, 8Ω, 70V & 100V Power Supply:- AC: 220-240V 50/60Hz DC: 36V (3×12V Car Battery)

Decorative Top Post light with 3 mtr height decorative pole having ornamental frame & embellishment at suitable height including 50W LED & Holding fixture (for selfiee point) Note:- Sample to be approved before supply

SMART SUN POWER

SMART SUN POWER