Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹19.3 LAccepted-AOC | 1 | Accepted-AOC L1 bidder | |
| 2 | 2₹22.5 L+₹2.6 L (13.1%)Rejected-Finance H NO 1237 PANA PAPOSIAN NARELA NORTH WEST DELHI NEW DELHI 110 040 | NEW DELHI | NORTH WEST DELHI | DELHI | 110040 | 2 | Rejected-Finance other than L1 | |
| 3 | 3₹25.2 L+₹5.4 L (27.1%)Rejected-Finance 20 8 EWS PREETAM NAGAR COLONY ALLAHABAD | PRAYAGRAJ | UTTAR PRADESH | 211001 | 3 | Rejected-Finance other than L1 | |
| 4 | 4₹27.2 L+₹7.3 L (36.8%)Rejected-Finance | 4 | Rejected-Finance other than L1 |
Tender Value
₹30 L
EMD Value
₹60,000
Closing Date
4 Sept 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE AF Tughlakabad
GE AF TUGHLAKABAD SANGAM VIHAR PO NEW DELHI 110080
PETTY REPAIR AND DAY TO DAY COMPREHENSIVE MAINTENANCE TO BANI CAMP, VSV AND TECH AREA AT AF STN NAJAFGARH UNDER GE (AF) TUGHLAKABAD
2024_MES_655562_1
GE/TKD-27/2024-25
Open Tender
Civil Works - Others
Item Rate
270 days
GE AF Tughlakabad
MES contractor enlisted having deposited Standing Security with dept. Contractors not enlisted in MES should meet the MES enlistment criteria corresponding to appropriate class and category
8 documents required · 8 mandatory
₹0
₹60,000
Yes
11 Nov 2024
9 Jul 2024
6 Sept 2024
9 Jul 2024
4 Sept 2024
23 Jul 2024
Amount
Attending plumber complaints and rectify defects (i.e. flushing cistern leakage from down pipe, flush handle, PVC connection, stop valves, Leakage of bib taps, Wall mixer, basin mixer, stop/ angle cock, Pipe line leakages, etc including provision of all type of washers, rubber cone, M-seal, spindle for Bib tap/stop cock with necessary tools & plant and made functional to entire satisfaction complete all as specified and directed by Engr-in-charge.
Attending carpenter complaints (i.e. tightening of loose door/window/cup board hinges, and refixing of loose sliding bolts/tower bolt/handle, refixing of loose pelmet & curtain rod/brakets, easing of doors/windows/cup boards and repair in same position including providing all type of screws, nails, timber beading, fevicol and necessary small items as per site requirement with necessary tools & plant and made functional to entire satisfaction complete all as specified and directed by Engr-in-charge.
Attending mason complaints and rectifying defects (i.e. broken wall, floor, plinth protection, plaster, refixing of tiles etc in patches, each job requiring cement not more than 2 Kg for each complaint as per site requirement, including provision of sand & aggregate as required with necessary tools & plant complete made functional to entire satisfaction complete all as specified and directed by Engr-in-charge. Note for item Nos 1.00, 2.00 and 3.00: Mason and carpenter complaints shall be attended and rectified within 72 Hours & plumber complaints shall be attended and rectified within 48 Hours of handing over of complaint slip. However, certain complaints, if declared as urgent by the Engineer in Charge, shall be attended and rectified by the contractor on the same day. Violation of this timeline shall attract a penalty of Rs. 250.00/Per complaint per day on the contractor.
Taking up or down15 mm steel tubing and connections including cleaning for refixing or removal complete all as specified and directed by Engr-in-charge.
Taking up or down 20 mm steel tubing and connections including cleaning for refixing or removal complete all as specified and directed by Engr-in-charge.
S&F 15 mm dia steel water tubing, galvanized, medium grade, with all fittings, fixed to walls and ceiling or in floor complete all as specified and directed by Engr-in-charge.
S&F 20 mm dia steel water tubing, galvanized, medium grade, with all fittings, fixed to walls and ceiling or in floor complete all as specified and directed by Engr-in-charge.
S&F 500 litres, rotational moulded polyethylene water storage tank (Cylindrical vertical with closed top), hoisted and fixed in position including dismantling water tank and removing to store complete all as specified and directed by Engr-in-charge. specified and directed by Engr-in-charge.
S&F 1000 litres, rotational moulded polyethylene water storage tank (Cylindrical vertical with closed top), hoisted and fixed in position including dismantling water tank and removing to store complete all as specified and directed by Engr-in-charge. specified and directed by Engr-in-charge.
S&F 20mm bore ball brass valve high pressure with polythene float and fly nut complete, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed by Engr-in-charge. specified and directed by Engr-in-charge.
S&F in repairs, vitreous China wash hand basin, white, flat back size 550 x 400mm including 15mm dia, 450 mm long HDPE PVC connection, 32 mm dia wast coupling and 32mm bore Waste coupling fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement including pedastal/CI brackets complete all as specified and directed by Engr-in-charge.
S&F in repair vitreous china squatting pan ORRISA pattern, size 580x440mm white, with integral foot rest including provn of concrete bedding and connection to trap and flushing pipe antisyphonage pipe etc comple incl making good to floor complete all as specified and directed by Engr-in-charge.
S&F in repair Vitreous China wash down water closet pan (pedestal pattern) white with "P" or "S" Trap front or back inlet fixing bols, PVC seat cover closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device and making all necessary connection complete all as specified and directed by Engr-in-charge.
S&F in repair of wall/floor mounted EWC with integrated vitreous china flushing cistern of 10 Ltrs capacity, single unit, complete set and making all necessary connections complete all as specified and directed by Engr-in-charge.
S&F in repairs Vitreous China urinal bowl type flat back or angle back type, size( 465x355x265m) complete including providing and fixing plugs,waste pipe 32mm dia ,bedding urinal against wall in cement mortar 1: 2, screwing urinal to plugs with and including 60 mm long brass screws pointing around urinal back in cement mortar complete all as specified and directed by Engr-in-charge.
S&F in repairs plastic water closet seat white colour,closed pattern with flat bottom and cover with mild steel CP or aluminium hinge device etc complete all as specified and directed by Engr-in-charge.
S&F in repair PVC valve less symphonic action type, flushing cistern, low level, white of capacity 10 ltrs with inlet , ball valve, float and handle including brackets complete all as specified and directed by Engr-in-charge.
S&F in repair 20mm bore ball brass valve high pressure with polythene float and fly nut complete, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed by Engr-in-charge.
Removal of air lock/blockage of water in GI and PPR Tubing 15/20mm bore including taking down (if required) cleaning the pipe or fitting etc and refixing the same in position complete including new GI fitting if required for refixing complete all as specified and directed by Engr-in-charge.
Draining out water from existing PVC water storage tank exc 500 ltr and not exc 1000 ltr capacity and cleaning silt deposited therein, washing out with soap water or surf including taking down connection and refixing complete all as specified and directed by Engr-in-charge.
Draining out water from existing PVC water storage tank exc 250 ltr and not exc 500 ltr capacity and cleaning silt deposited therein, washing out with soap water or surf including taking down connection and refixing complete all as specified and directed by Engr-in-charge.
S&F in repairs of small fittings galvanised iron medium grade such as socket, elbow, nipple, tee, union, tank nipple, tank connection etc of any size for 15mm bore GI (ISI marked) complete all as specified and directed by Engr-in-charge.
All as per item No 22 above but 20mm GI (ISI marked) complete all as specified and directed by Engr-in-charge.
S&F in repair superior quality PVC Urinal waste pipe, 32 mm bore, 650mm long, complete all as specified and directed by Engr-in-charge.
S&F in repairs of 125 mm fancy type shower roses brass chromium plated with C P arms for15mm bore GI pipe complete all as specified and directed by Engr-in-charge.
S&F in repairs chromium plated brass tubular towel rail 20 mm dia, D type for wash hand basin centre holed fixed to iron pipe complete all as specified and directed by Engr-in-charge. specified and directed by Engr-in-charge.
S&F in repair 20mm bore stop valve cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union complete all as specified and directed by Engr-in-charge.
S&F in repair pillar taps (fancy type), of 15 mm dia, cast copper alloy, with capstan heads, with chromium plated, screwed down high pressure with or without lettered 'hot' or cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and directed by Engr-in-charge.
S&F in repair 15mm bore angle valve cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union complete all as specified and directed by Engr-in-charge.
S&F in repair bib taps 15mm bore cast coper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for union complete all as specified and directed by Engr-in-charge.
S&F in repair 15mm bore PVC connections, with PTMT nuts of length 450mm complete all as specified and directed by Engr-in-charge.
S&F in repairs PVC flexible waste down pipe-32 mm dia and 600 mm long complete all as specified and directed by Engr-in-charge.
S&F in repair wall mixer for mixing hot & cold water, with telephonic shower arrangement, chromium plated brass with three joints, screwed to iron pipe or for unions, 15 mm bore and fixed with two stainless steel wall flange, complete all as specified and directed by Engr-in-charge.
S&F in repair 15mm bore mixture valve chromium plated fancy type for wall in two/three pin fixed to iron pipe complete all as specified and directed by Engr-in-charge.
S&F in repair mixing valve, chromium plated brass, centre hole basin mixer, screwed and jointed to PVC connection with nuts in wash hand basin, 15 mm bore, complete all as specified and directed by Engr-in-charge.
S&F in repair bib tap standard of PTMT any colour, high pressure, screwed for iron pipe and fixed, 15 mm bore (minimum weight 90 gms), complete all as specified and directed by Engr-in-charge.
S&F in repair 32mm dia waste coupling of PTMT (half or full threaded) Minimum weight 32mm-45gms/40mm-60 gms) Ditto but suitable for urinals (Minimum weight 32mm-45gms) complete all as specified and directed by Engr-in-charge.
S&F in repairs of 40 mm waste coupling of PTMT (half or full threaded) Minimum weight 40mm-60gms complete all as specified and directed by Engr-in-charge.
S&F in repairs of 32 mm bore of pipe low density (LDPE) of pressure rating 6 kg/ sqcm fixed to wall or floor etc including fittings complete all as specified and directed by Engr-in-charge.
S&F in repairs, toilet cabinet with mirror of overall size 350 x 450mm complete all as specified and directed by Engr-in-charge.
S&F grating doom of 100/110 mm dia, made of stainless steel with or without waste pipe hole, complete all as specified and directed by Engr-in-charge.
S&F in repair grating round 125 mm size (Minimum weight 50gms) complete all as specified and directed by Engr-in-charge.
S&F in repairs sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes including fixing cantilever brackets coupling & waste pipe and connecting union to pipe overall size 1200mm x 460mm bowl size 410mm x 330mm x 200mm complete all as specified and directed by Engr-in-charge.
S&F stainless steel utensil plate rack of size 900x1000x200 mm, made of 0.60 mm thick stainless steel sheet and fixed in position, design and pattern as approved by the GE, complete all as specified and directed by Engr-in-charge.
S&F in repairs of Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect complete all as specified and directed by Engr-in-charge.
S&F of corner glass shelf 12" complete all as specified and directed by Engr-in-charge.
Demolition and breaking up drain pipe salt glazed ware, AC, PVC/CI or reinforced concret pipes internal dia of pipe 100mm /75mm complete all as specified and directed by Engr-in-charge.
S&F 100mm dia , Cast iron soil, waste and vent pipes, sand cast pipe in any length with or without ears with cement joints, laid in trenches or in floors fixed to wall complete all as specified and directed by Engr-in-charge.
S&F 75 mm dia Cast iron soil, waste and vent pipes, sand cast pipe in any length with or without ears with cement joints, laid in trenches or in floors fixed to wall complete all as specified and directed by Engr-in-charge.
S&F in repair PVC (SWR) 110mm bore pipes single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed by Engr-in-charge.
S&F PVC (SWR) bends (TEE,Elbow & socket) any radius 110mm bore complete all as specified and directed by Engr-in-charge.
S&F PVC (SWR) floor trap 75mm dia outlet plain with grating including jointing with solvent cement including jointing to waste pipe fixed in cement concrete 1:2:4, type B-1 complete all as specified and directed by Engr-in-charge.
Dismantling plain or corrugated steel shetting, any gauge, thickness, including Nainital or similar pattern roof covering complete all as specified and directed by Engr-in-charge.
S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in-charge.
S&F Colored Polycarbonate Sheets 6mm thick (multi wall) as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in-charge.
S&F cubical partition consisting of aluminium frame of section 65mmx40mmx1mm thick, bottom and top gap/partition filled with 6 mm thick aluminium composite panels sheet, coloured with decorative choice on both sides or top gap filled with 5.5mm thick tinted sheet glass jointing cleats, glazing clip rubber packing anodized aluminium snap beading complete all as specified and directed by Engr-in-charge.
M&L for false ceiling of approved (ISI marked) make with 4mm thick Anodised aluminium snap grid frame work for false ceiling 600x600mm size suspended system fixed to MS framed work of approved make and section as specified in SSR Part I with suitable hook/fasteners and GI/almn suspenders not less than 3mm dia @ 1.00m C/C minimum. ceiling system is to be fixed in water level without any sag and dismantling old ceiling board with frame complete all as specified and directed by Engr-in-charge.
Demolition of cement concrete in fround floors and pavings not exceeding 15 cm thickness below or above GL complete all as specified and directed by Engr-in-charge.
M&L for 75 mm thick PCC C-2, 1:3:6 using 40mm agg as in sub base complete all as specified and directed by Engr-in-charge.
M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed by Engr-in-charge.
M&L for precast machine pressed concrete interlocking pave blocks any shape and size conforming to IS 15658-2006 of 60 mm thickness, M 35 grade. wirh grey cement and pigment complete all as specified and directed by Engr-in-charge.
M&L for screed bed or bedding layer of mortar, 20 mm thick, in cement mortar 1:6, for laying floor finishes/tiles complete all as specified and directed by Engr-in-charge.
M&L for 25 mm thick chequered cement concrete coloured tiles glossy finished of any shape any size set jointed and pointed in neat cement slurry in floors with grey cement and no pigments complete all as specified and directed by Engr-in-charge.
M&L for glazed ceramic colour tile 300mmx200mmx7mm /350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in coloured cement on vertical surfaces such as in dado/skirting etc over and including 10 mm thick rendering in cement mortar (1:4)complete in patches n.exc 3 sqm each including dismantling of skirting (terrezo/PCC/Tiles of any description) complete all as specified and directed by Engr-in-charge.
S&F glazed ceramic (non skid) joint free edge cut coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm set and jointed in neat cement slurry and pointed in colour cement as in floor over and including 15mm thick screed bed or bedding layer in cement mortar (1:4) complete in patches n.exc 4 sqm each including dismantling/demollition floor/tile (terrezo/PCC/Tiles of any description) complete all as specified and directed by Engr-in-charge.
Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engr-in-charge.
M&L for screed bed or bedding layer of mortar, 20 mm thick, in cement mortar 1:6, for laying floor finishes/tiles complete all as specified and directed by Engr-in-charge.
M&L for Vitrified ceramic light shade coloured tiles 10mm thick area of each tiles not exc 0.36 sqm , in floor etc. set & jointed in neat cement slurry & pointed in white or coloured cement to match the shade of the tile complete all as specified and directed by Engr-in-charge.
M&L for Machine cut Kota stone slab flooring 20-25 mm thick over cement screed base lad and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed by Engr-in-charge.
M&L for 16 to 18 mm thick Granite (of any tpe) work (tablee rubbed and polished) in steps, jambs, pillars, windowcills,cooking platforms and like in cement mortar (1:4) including pointing in white cment (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed by Engr-in-charge.
M&L for 15mm thck cement plaster in CM (1:4) on brick work /concrete surface finished even & smooth w/o using extra cement. the area of patches should not be more than 7.00 sqm. incl taking down cement plaster in patches on brick work, racking out joints, hacking for key scrubbing down with water etc complete all as specified and directed by Engr-in-charge.
Demolition of brick work of any type built in cement mortor in foul condition etc complete all as specified and directed by Engr-in-charge.
M&Lbrick work built in cement and sand mortar 1:6 with sub class 'B' old size bricks straight or curved on plan exceeding 6m means radius complete all as specified and directed by Engr-in-charge.
M&L for 15 mm thick rendering in CM (1:6) on other than fair faces surfaces of brick walls finished even and smooth without using extra cement complete all as specified and directed by Engr-in-charge.
M&L for 15 mm thick rendering in CM (1:4) on fair faces surfaces of brick walls finished even and smooth without using extra cement complete all as specified and directed by Engr-in-charge.
M&L for rendering 15mm thick in CM ( 1:4) on fair faces of brick work or concrete surfaces finished even & smooth without using extra cement incl taking down cement plaster or concrete, brick surface and raking out hacking for key scrubbing down with water to receive plaster complete all as specified and directed by Engr-in-charge.
M&L for rendering 15mm thick in CM (1:6) on fair faces of brick work or concrete surfaces finished even & smooth without using extra cement incl taking down cement plaster or concrete, brick surface and raking out hacking for key scrubbing down with water to receive plaster complete all as specified and directed by Engr-in-charge.
M&L for rendering 5mm thick in CM (1:3) on fair faces of ceiling surfaces finished even & smooth without using extra cement incl taking down cement plaster or concrete, brick surface and raking out hacking for key scrubbing down with water to receive plaster complete all as specified and directed by Engr-in-charge.
M&L for preparing newly plastered surfaces and applying applying two coats of distemper with distemper oil emulsion white or tinted over and including one coat of 1mm thick wall care putty complete all as specified and directed by Engr-in-charge.
M&L for preparation of newly plastered surfaces and applying three coats of white wash on ceiling complete all as specified and directed by Engr-in-charge.
M&Lpreparation of newly plastered surfaces of walls and applying two coats of Cement Base Paint of approved tint, complete all as specified and directed by Engr-in-charge.
Taking down chowkats or frames not exceeding 1.5 Sqm each with shutter (without taking off shutter from the frame) complete all as specified and directed by Engr-in-charge.
Taking down chowkats or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each with shutter (without taking off shutter from the frame) complete all as specified and directed by Engr-in-charge.
Taking down shutter of any description exc. 1 sqm but n.exc 2 sqm each and removing from site complete all as specified and directed by Engr-in-charge.
S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and fastening and fixing complete FE 290 Gde E-165 complete all as specified and directed by Engr-in-charge.
S&F Pressed steel door frame of size 105mm x 60mm with one or more rebates using 1.25mm thick sheet including necessary fixing lugs, lock strike plate including one shop coat of zinc chromate primer complete all as specified and directed by Engr-in-charge.
S&F 35mm thick factory made IInd Class Hard wood panelled door shutters single panel with lock rail and panel of 9mm B.W.P. marine grade plywood bonded with high quality liquid phenol formaldehyde synthetic resin adhesive conforming to IS-710 or 12mm thick particle board veneered with commercial veneering on both faces. The size of rails & style as specified in SSR Part-I (2009) section 8 and as per IS-1003(Part-I) kiln seasoned as per IS-1141 and chemically pressure treated as per IS-401 complete all as specified and directed by Engr-in-charge.
S&F 35mm thick factory made glazed and skeleton door shutters open rebated of second class hard wood rail and styles(Hollock), prepared to receive glass/gauge etc without sash bars, edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass/gauge etc. The size of rails & style as specified in SSR Part-I (2009) section 8 and as per IS-1003(Part-I) kiln seasoned as per IS-1141 and chemically pressure treated as per IS-401 complete all as specified and directed by Engr-in-charge.
S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, suppling & fixing in opening as per specification & drawing
S&F Factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded palin colour PVC `C' channel heaving a PVC sheert strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bbottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.
S&F Prelaminated particle board 18 mm thick, interior grade, ISI marked as in cupboard shutter / shelves, prelaminated one side with decorative choice lamination and other side balancing white lamination including 6mm thick teak wood liping, fixed with screws to timber frame work complete all as specified and directed by Engr-in-charge.
M&L for anodised aluminium frame (minimum 50 micron powder coating) for doors, windows, ventilators with one or more rebates including cleat for fixing etc. complete all as specified and directed by Engr-in-charge.
S&F of aluminium powder coated of any colour (thickness or powder coating not less than 50micron) doors shutters aluminium saction weighing 0.55 kg/sqm including necessary jointing cleats, glazing clips, rubber neoprene packing, handles two nos in each door, hinges, anodised aluminium snap beading, screws complete all as specified and directed by Engr-in-charge.
S&F of aluminium powder coated of any colour (thickness or powder coating not less than 50micron) windows and ventilator shutters, with aluminium grill, side hung type, without sash bars aluminium saction weighing 0.55 kg/sqm including necessary jointing cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fitting such as peg stay 150mm long (1 no) hinges type B21 100 mm long (2 No) suitable handle (1No) complete all as specified and directed by Engr-in-charge.
S&F in repair double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed, with and including taking down & refixing the aluminium door shutter, complete all as specified and directed by Engr-in-charge.
S&F in repair door closer hydraulically regulated, aluminium die cast body, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm width and weight between 61 to 80 Kg and fixed, complete all as specified and directed by Engr-in-charge.
S&F galvanized mild steel wire cloth 0.56 mm nominal dia of wire & average width of aperture 1.18mm & fixed with tinned tacks or galvanized wire staples in doors and windows complete all as specified and directed by Engr-in-charge.
S&F 150 mm long Mild steel barrel tower blots, stove enamelled black, with bright bolt and fixed complete all as specified and directed by Engr-in-charge.
S&F 125 mm long Aluminium tower blots, stove enamelled black, with bright bolt and fixed complete all as specified and directed by Engr-in-charge.
S&F 100 mm size aluminium handles, cast type anodised complete all as specified and directed by Engr-in-charge.
S&F mild steel butt hinges 100mm size cold rolled medium weight and fixed complete all as specified and directed by Engr-in-charge.
S&F 100 mm size Butt hinges, extruded aluminium alloy with galvanished mild steel hinges pin, anodized & fixed, type B-21 complete all as specified and directed by Engr-in-charge.
S&F fixed in repairs galvanized mild steel wire cloth 0.56 mm nominal dia of wire & average width of aperture 1.18mm & fixed with tinned tacks or galvanized wire staples in door and steel window complete all as specified and directed by Engr-in-charge.
S&F in repair 300mm size ordinary mild steel , rat tailed rod pattern spring including roller and roller plate welded to mild steel frame fixed in repair complete all as specified and directed by Engr-in-charge.
Hacking out old, broken glass (any thickness) size quality or description) from metal frames incl. punching or drilling out old glazing pins/spring clips and fixing new ones incl and M&L for 3mm thick sheet glass ordinary quality and glazing with oil putty in squares not exc. 0.5 Sqm in each pane complete all as specified and directed by Engr-in-charge.
S&F Figured glass, pinhead type, 3 mm thick and glazing with oil putty/wooden beads in squars n. exc 0.5 sqm each pane including Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips complete all as specified and directed by Engr-in-charge.
Hacking out old, broken glass (any thickness,) size quality or description) from metal frames incl. punching or drilling out old glazing pins/spring clips and fixing new ones incl and M&L for 5.5 mm thick Sheet glass, ordinary quality and glazing/black glass in steel or aluminium windows complete all as specified and directed by Engr-in-charge.
S&F in repair mild steel butt hinges 100mm size cold rolled medium weight and fixed complete all as specified and directed by Engr-in-charge.
S&F in repair floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed in floor, overall length of cover plate 140 mm, complete all as specified and directed by Engr-in-charge.
S&F mortice lock brass 4 levers vertical type size of 100 mm with 3 key complete all as specified and directed by Engr-in-charge.
S&F door seal of aluminium for doors of aluminium and wooden complete all as specified and directed by Engr-in-charge.
S&F in repair curtain rails 25mm bore decorative type chromium plated with fixing brackets, stops, rollers, etc complete all as specified and directed by Engr-in-charge.
S&F in repairs of 150 mm mild steel barrel tower bolts stove enamelled black with bright bolt and fixed complete all as specified and directed by Engr-in-charge.
S&F 300 mm mild steel sliding bolt plate type stove enamelled black with bright bolt not less than 12 mm dia with and including a minium of 6 bolts and nuts four on bolt plate and two on stapple plate and fixed complete all as specified and directed by Engr-in-charge.
M&L for preparation of new or previously untreated wooden or wood based surfaces of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint over and including one coat of pink primer complete all as specified and directed by Engr-in-charge.
M&L for preparation new or previously untreated steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over and including one coat of red oxide zinc chrome primer complete all as specified and directed by Engr-in-charge.
M&L for Providing precast cement concrete Type B-0 1:2:4 using (12.5 mm graded aggregate) louvres and jallies, 45 mm thick (measured solid), including all mouldings but excluding frame Set in Cement Mortar 1:4 complete all as specified and directed by Engr-in-charge.
M&L for complete removal of existing treatment on walls/chajjas and applying two coat of cement based paint upto four storey bldgs including necessary scafolding/arragement complete all as specified and directed by Engr-in-charge.
M&L for preparing old surface of walls, plastered or unplastered by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots & applying two coat of distemper oil emulsion (Washable oil bound distemper) on wall including cornices, pillasters complete all as specified and directed by Engr-in-charge.
M/S HARINDER SINGH (BID ID -3076214)
MOHIT ENTERPRISES (BID ID -3080489)
M/s R P Enterprises (BID ID -3082438)
stage.html
html • 0.05 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .