CONVERSION OF EXISTING NON LED FITTING/FIXTURES INTO LED IN VARIOUS MARRIED, OTM ACCN AND VARIOUS LOCS AT UDHAMPUR

Amount

Taking down old Non LED Tube light fittings any type and size complete and making good the disturbed surface as per the existing, complete all as specified and directed.

Taking down old Non LED Mirror light fittings any type and size complete and making good the disturbed surface as per the existing, complete all as specified and directed.

Taking down old Non LED Bulk Head light fittings any type and size complete and making good the disturbed surface as per the existing, complete all as specified and directed.

Taking down old Batten/Angle Holders any type and size complete and making good the disturbed surface as per the existing, complete all as specified and directed.

Taking down old panel light & security light of any description size/capacity, complete all as specified and directed.

Taking down old Hi-bay light from Truss of any capacity and any description, complete all as specified and directed.

Decorative ultra slim linear surface mounted LED lighting fixture (4 feet length), 20Watt LED with integral electronic driver complete making connection and testing after fixing all as specified and directed by Engr-in-charge.The specification of light fitting should meet the following : - (a) Housing of Light fitting : Aluminium Extruded (b) Operating Voltage : Between 150 V- 270V (c) Operating Temperature : -10 to +45 Degree Centigrade (d) Lumen efficacy : Not less than 110 lm/W (e) System Lumens : Not less than 2000 lm (f) Colour Temperature : Not less than 5700K (g) Surge Voltage Protection : Up to 2KV (h) Ingress protection : IP 20 (j) Total Harmonic Distortion (THD) : Not less than 20% (k) Power factor : Not less than : 0.90 (l) Line protection : Under/Over voltage Protection (m) Input Frequancy : 50 Hz

Decorative ultra slim linear surface mounted LED lighting fixture (2 feet length), 10 Watt LED with integral electronic driver complete making connection and testing after fixing all as specified and directed by Engr-in-charge.The specification of light fitting should meet the following : - (a) Housing of Light fitting : Aluminium Extruded (b) Operating Voltage : Between 150 V- 270V (c) Operating Temperature : -10 to +45 Degree Centigrade (d) Lumen efficacy : Not less than 100 lm/W (e) System Lumens : Not less than 1000 lm (f) Colour Temperature : Not less than 5700K (g) Surge Voltage Protection : Up to 2KV (h) Ingress protection : IP 20 (j) Total Harmonic Distortion (THD) : Not less than 20% (k) Power factor : Not less than : 0.9 (l) Line protection : Under/Over voltage Protection (m) Input Frequancy : 50 Hz

Decorative ultra slim linear surface mounted LED lighting fixture (1 feet length), 5 Watt LED with integral electronic driver complete making connection and testing after fixing all as specified and directed by Engr-in-charge.The specification of light fitting should meet the following : - (a) Housing of Light fitting : Polycarbonate/Thermoplastic (b) Operating Voltage : Between 150 V- 270V (c) Operating Temperature : -10 to +45 Degree Centigrade (d) Lumen efficacy : Not less than 90 lm/W (e) System Lumens : Not less than 450 lm (f) Colour Temperature : Not less than 6500K (g) Surge Voltage Protection : Up to 2KV (h) Ingress protection : IP 20 (j) Total Harmonic Distortion (THD) : Not less than 20% (k) Power factor : Not less than : 0.9 (l) Line protection : Under/Over voltage Protection (m) Input Frequancy : 50 Hz

Environmental friendly, energy saving, surface mounted, decorative LED 10 Watt Bulk head luminire, with integral electronic LED driver with APFC and lower THD, Output complete making connection and testing after fixing all as specified and directed by Engr-in-charge.The specification of light fitting should meet the following :- (a) Housing of Light fitting : Die Cast Aluminium (b) Diffuser : Polycarbonate UV protected diffuser (c) Operating Voltage : Between 140 V- 270V (d) Operating Temperature : -10 to +45 Degree Centigrade (e) Lumen efficacy : Not less than 100 lm/W (f) System Lumens : Not less than 900 lm (g) Colour Temperature : Not less than 5700K (h) Surge Voltage Protection : Up to 4kV (j) Ingress protection : IP 65 (k) Total Harmonic Distortion (THD) : Not less than 20% (l) Power factor : Not less than : 0.9 (m) Line protection : Under/Over voltage Protection (n) Input Frequancy : 50 Hz

Environmental friendly, new generation,aesthetically designed, ultra modern, glare-free symmetric light distribution recess mounting luminaire with high efficiency long life LED integral module as light source, suitable for Armstrong/Grid ceiling 36 Watt 2'x2' LED flat Panel luminire with SELV Output electronic LED driver (SMPS based constant current supply) complete making connection and testing after fixing including making good disturbed surface, all as specified and directed by Engr-in-charge. The specification of light fitting should meet the following : - (a) Housing of Light fitting : CRCA powder coated/extruded aluminium (b) Diffuser : High transmittance polystyrene opal diffuser (c) Operating Voltage : Between 150 V- 270V (d) Operating Temperature : -10 to +45 Degree Centigrade (e) Lumen efficacy : Not less than 100 lm/W (f) System Lumens : Not less than 3600 lm (g) Colour Temperature : Not less than 5700K (h) Surge Voltage Protection : Up to 2KV (j) Ingress protection : IP 20 (k) Total Harmonic Distortion (THD) : Not less than 20% (l) Power factor : Not less than : 0.9 (m) Line protection : Under/Over voltage Protection (n) Input Frequancy : 50 Hz (o) Dimension of Cut out : (570 x570 x 76)mm

Environmental friendly, new generation,aesthetically designed, ultra modern, glare-free symmetric light distribution SURFACE mounting luminaire with high efficiency long life LED integral module as light source, 36 Watt 2'x2' LED flat Panel luminire with SELV Output electronic LED driver (SMPS based constant current supply) complete making connection and testing after fixing including making good disturbed surface all as specified and directed by Engr-in-charge.The specification of light fitting should meet the following : - (a) Housing of Light fitting : CRCA powder coated (b) Diffuser : High transmittance polystyrene opal diffuser (c) Operating Voltage : 150 V- 270V (d) Operating Temperature : -10 to +45 Degree Centigrade (e) Lumen efficacy : Not less than 100 lm/W (f) System Lumens : Not less than 3600 lm (g) Colour Temperature : Not less than 5700K (h) Surge Voltage Protection : Up to 2KV (j) Ingress protection : IP 20 (k) Total Harmonic Distortion (THD) : Not less than 20% (l) Power factor : Not less than : 0.9 (m) Line protection : Under/Over voltage Protection (n) Input Frequancy : 50 Hz (o) Dimension of fitting : (600 x600 x 50)mm

Aesthetically designed 1x1 LED flat 18 Watt panel for surface mounting with high efficiency long life LED integral module as light source, Slim type independent Isolated,SELV Output electronic LED driver (SMPS based constant current supply) complete making connection and testing after fixing including making good disturbed surface complete all as specified and directed by Engr-in-charge. The specification of light fitting should meet the following : - (a) Housing of Light fitting : Aluminium Die Cast/Extruded aluminium (b) Diffuser : High transmittance opal Diffuser (c) Operating Voltage : Between 150 V- 270V (d) Operating Temperature : -10 to +45 Degree Centigrade (e) Lumen efficacy : Not less than 100 lm/W (f) System Lumens : Not less than 1800 lm (g) Colour Temperature : Not less than 5700K (h) Surge Voltage Protection : Up to 2KV (j) Ingress protection : IP 20 (k) Total Harmonic Distortion (THD) : Not less than 20% (l) Power factor : Not less than : 0.9 (m) Line protection : Under/Over voltage Protection (n) Input Frequancy : 50 Hz (o) Dimension of fitting : (300 x300 x 70)mm

High efficiency 1x1 recess LED flat panel with high brightness LED for glare-free homogenous illumination suitable for POP ceilings 18 Watt panel with high efficiency long life LED integral module as light source,complete with independent Isolated,SELV Output electronic LED driver (SMPS based constant current supply) complete making connection and testing after fixing including making good disturbed surface complete all as specified and directed by Engr-in-charge. The specification of light fitting should meet the following : - (a) Housing of Light fitting : Aluminium Die Cast/Extruded aluminium (b) Diffuser : High transmittance opal diffuser (c) Operating Voltage : Between 150 V- 270V (d) Operating Temperature : -10 to +45 Degree Centigrade (e) Lumen efficacy : Not less than 100 lm/W (f) System Lumens : Not less than 1500 lm (g) Colour Temperature : Not less than 5700K (h) Surge Voltage Protection : Up to 2KV (j) Ingress protection : IP 20 (k) Total Harmonic Distortion (THD) : Not less than 20% (l) Power factor : Not less than : 0.9 (m) Line protection : Under/Over voltage Protection (n) Input Frequancy : 50 Hz (o) Dimension of fitting : (295 x295 x 70)mm

Slim-Fit low profile recessed round downlights, superior light output and uniformity utilising the latest edge-lit LED technology, 15Watt and viewing angle of 120° to ensure better uniformity complete with high transmittance polystyrene opal diffuser for glare-free symmetric light distribution powered by an independent Isolated, SELV Output electronic LED driver (SMPS based constant current supply) complete making connection and testing after fixing, including making good disturbed surface complete all as specified and directed by Engr-in-charge. The specification of light fitting should meet the following : - (a) Housing of Light fitting : Pressure Die cast Aluminium/Extruded aluminium (b) Diffuser : High transmittance opal Diffuser (c) Operating Voltage : Between 150 V- 270V (d) Operating Temperature : -10 to +45 Degree Centigrade (e) Lumen efficacy : Not less than 100 lm/W (f) System Lumens : Not less than 1500 lm (g) Colour Temperature : Not less than 5700K (h) Surge Voltage Protection : Up to 2KV (j) Ingress protection : IP 20 (k) Total Harmonic Distortion (THD) : Not less than 20% (l) Power factor : Not less than : 0.9 (m) Line protection : Under/Over voltage Protection (n) Input Frequancy : 50 Hz (o) Dimension of fitting : 180-200 mm dia

Surface mounted LED downlighter with white powder coated, 15Watt with High efficiency long life LED package and viewing angle of 120° to ensure better uniformity complete, powered by an independent Isolated, SELV Output electronic LED driver (SMPS based constant current supply) complete making connection and testing after fixing, including making good disturbed surface complete all as specified and directed by Engr-in-charge. The specification of light fitting should meet the following : - (a) Housing of Light fitting : CRCA Powder Coated/Die cast aluminium/spun aluminium (b) Diffuser : High transmittance opal Diffuser (c) Operating Voltage : Between 150 V- 270V (d) Operating Temperature : -10 to +45 Degree Centigrade (e) Lumen efficacy : Not less than 100 lm/W (f) System Lumens : Not less than 1200 lm (g) Colour Temperature : Not less than 5700K (h) Surge Voltage Protection : Up to 2KV (j) Ingress protection : IP 20 (k) Total Harmonic Distortion (THD) : Not less than 20% (l) Power factor : Not less than : 0.9 (m) Line protection : Under/Over voltage Protection (n) Input Frequancy : 50 Hz (o) Dimension of fitting : 200mm to 250mm dia

New generation energy saving and environmental friendly long life LED street light of 25 watt with high power LED as lighting source and lens embedded PC cover having TOP OPENING seperate driver compartment and impact resistance of IK07 with High efficiency long life LED with SMD LED on MCPCB Powered by Built-in, isolated electronic LED driver (SMPS based constant current supply) complete making connection and testing after fixing, complete all as specified and directed by Engr-in-charge. The specification of light fitting should meet the following : - (a) Housing of Light fitting : Aluminium Die Cast (b) Diffuser : High efficient LENS Optics (c) Operating Voltage : Between 150 V- 270V (d) Operating Temperature : -10 to +45 Degree Centigrade (e) Lumen efficacy : Not less than 100 lm/W (f) System Lumens : Not less than 2500 lm (g) Colour Temperature : Not less than 5700K (h) Surge Voltage Protection : Up to 4KV (j) Ingress protection : IP 65 (k) Total Harmonic Distortion (THD) : Not less than 20% (l) Power factor : Not less than : 0.9 (m) Line protection : Under/Over voltage Protection (n) Input Frequancy : 50 Hz

Energy saving, environment friendly, pressure die casted aluminium housing & robust Highbay LED 80 watt with high efficacy & lower power consumption delivers high brightness & excellent illumination with High efficiency long life LED withSMD LED on MCPCB complete making connection and testing after fixing, including making good disturbed surface complete all as specified and directed by Engr-in-charge. The specification of light fitting should meet the following : - (a) Housing of Light fitting : Die cast aluminium (b) Optics : High Quality PC Lens (c) Operating Voltage : Between 150 V- 270V (d) Operating Temperature : -10 to +45 Degree Centigrade (e) Lumen efficacy : Not less than 150 lm/W (f) System Lumens : Not less than 10000 lm (g) Colour Temperature : Not less than 5700K (h) Surge Voltage Protection : Up to 4KV (j) Ingress protection : IP 65 (k) Total Harmonic Distortion (THD) : Not less than 20% (l) Power factor : Not less than : 0.9 (m) Line protection : Under/Over voltage Protection (n) Input Frequancy : 50 Hz

Ceiling rose, 3 terminal, PVC / polycarbonate, isolated body complete all as specified directed by Engineer-in-Charge.

Round bakelite sheet of not less than 80mm dia and thickness not less than 3mm for fixing on the wall wherever fitting is not required to fix, including taping/insulating with insulation tap on naked wire all as specified and directed by Engineer-in-charge.

CREDIT SCHEDULE : Deduct Schedule of Credit worth Rs 20,67,340.00 (Minus) as listed in Schedule À' Part- II . Note: Tenderers will not quote against this item being a firm amount. Contract lump Sum will be worked out offline after deducting the credit schedule amount.

MOHAN LAL AND SONS

Razdan Builders and Suppliers

proach associates

JATINDER CONSTRUCTION COMPANY PRIVATE LIMITED

M/S ANIL KUMAR

R D Bansal