CERTAIN REPAIRS TO JOINERY, CUPBOARDS, CEILING, PLUMBING AND SANITARY FITTINGS AT OMQS,OFFICERS ENCLAVE, MES COLONY, NP AREA AND TECH AREA AT AFS HAKIMPET

Amount

Taking down chowkats or frames not exc. 1.5 Sqm each with shutters without taking off shutters from the frames complete all as specified and as directed.

All as per ser Item No 1 above but exc 1.5 Sqm and not exc 4 sqm each complete all as specified and as directed.

Taking down shutters of any description not exc 1 Sqm each complete all as specified and as directed.

All as per ser Item No 3 above but exc 1.0 Sqm and not exc 2 Sqm each complete all as specified and as directed.

Supply and fix mild steel work as in hold fasts including sanding and tarring complete all as specified and as directed.

Supply and fix factory made 35 mm thick second class hard wood plain framed panelled shutters (two panels) with lock rail and panels of 9 mm BWP commercial ply or 12 mm veneered particle board for others with commericial veneering on both faces and size of members of door shutters as per IS :1003(part I ) as specified in SSR part I section 3 clause 8.20 (a) fitted to chowkats, kiln seasoned and chemically pressure treated complete all as specified and as directed.

Supply and fix factory made kiln seasoned chemically treated 35 mm thick second class hard wood glazed and skeleton door shutters, open rebated and prepared to receive glass/gauge etc., without sash bars but divided into two panels, with bottom panel fitted 9 mm B.W.P. comercial ply or 12 mm venered particle board with commercial veneering, (half panel board & half wire mesh) wood additional stiles/rails edges of framing plain, chamfered or rounded fitted with miterd beads for receiving glass, gauge etc,size of members of door shutters as specified in SSR part I section 3 Clause 8.20(a) fitted to chowkats complete all as specified and as directed. Note- wire cloth will be measured and paid separtely.

All as per Ser item No 7 above but 30 mm thick window shutters (factory made) complete all as specified and as directed.

All as per Ser item No 8 above but 30 mm thick window shutters with sash bar (factory made) complete all as specified and as directed.

S&F 2nd class hard wood small fittings sugh as brackets of any type, lath and hinge blocks, shaped door and window stops and the likes, iincluding all necessary labours article n. exc 200 cu cm each complete all as specified and as directed.

Supply and fix 35 mm thick flush shutters solid core construction with block board and plywood face panels commercial type on both sides complete all as specified and as directed.

Supply and fix solid PVC door frame of size 50 mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube supplying and fixing in opening as per specification complete all as specified and as directed.

Supply and fix 30 mm thick factory made PVC rigid frame panel door shutter made from MS tubular frame of gauge 19 x 19 mm style and 15 mm x 15 mm top and bottom rails MS frame to be covered with 5 mm thick heat moulded PVC 'C' channel of size 50mm x 30mm for stiles with 5mm thick PVC sheet (50 mm wide for top rail, 75 mm wide for lock rail and bottom rail on either side). Paneling of 5 mm thick PVC sheet to be fitted in the MS frame, sealed to the styles and rails with 25 mm thick PVC sheet beading on either side and joined together with cement solvent adhesive complete all as specified and as directed.

S&F 100 mm long stainless steel butt hinges for PVC door frame complete all as specified and as directed.

Supply and fix 100 mm size medium weight cold rolled mild steel butt hinges complete all as specified and as directed.

All as per Ser item No 15 above but 75 mm size complete all as specified and as directed.

All as per Ser item No 15 above but 50 mm size complete all as specified and as directed.

Supply and fix 200 mm size Alluminium, anodised barrel tower bolts of extruted section and fixed complete all as specified and as directed.

All as per Ser item No 18 above but of size 150 mm complete all as specified and as directed.

Supply and fix 200 mm size extruded aluminium door handles fabricated type complete all as specified and as directed.

All as per item No 20 above but of size 100 mm complete all as specified and as directed.

Supply and fix alluminium alloy, anodized sliding door bolts 250 mm long with hasp and staple (bolt type) with fixing clips of sheet, cast or extruded sections and fixing bolt and sliding bolts of extruded sections or cast aluminium alloy, ISI marked and fixed complete all as specified and as directed.

Supply and fix mild steel helical door spring rat tail rod model including roller plate complete 300 mm long complete all as specified and as directed.

S&F 140 mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring fixed in floor complete all as specified and as directed.

S & F MS framed work as in doors of angle (or) other sections with gusset plate rails braces etc complete drilled for fixing of steel sheeting (or) other covering to doors etc to be prepared for hanging (or) sliding with and including either hooks and pintel hinges (or) steel hanging door etc. including covering sheet complete all as specified and directed.

Taking down cupboard shutter with sheleves cub boards exc 2 Sqm each (One cupboard set) of any type complete all as specified and as directed.

Taking down chowkhats with cupboard shutter (without taking off shutters from the frame) exc 1.50 Sqm but n. exc 4 Sqm each including sheleves cub boards (One cupboard set) of any type complete all as specified and as directed.

Material and labour for Second class hard wood plain solid straight chowkats and frames wrought, framed, rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and as directed.

M&L 2nd class hardwood plain fillets, rectangular or triangular in section exc 3 sq cm & n.exc 6 sq cm, clean sawn, secured bullnosed, splayed, chamfered or roundedwith nails fitted with wall for peg set complete all as specified and as directed.

S&F 2nd class hard wood skelton shutter, open rebated and prepared to receive prelamintated board 12 mm thick for cupboard etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing and size of side rail,top rail &bottom rail 75 mm width complete all as specified and as directed. Note - 12 mm thick prelaminated board will be measured and paid seprately.

S&F 18/19 mm thick prelaminated particle board, interior grade, prelaminated both side with decorative choice laminated sheet , fixed with screws to timber frame work complete all as specified and as directed.

S&F 18/19 mm thick prelaminated particle board, interior grade, prelaminated both side with decorative choice laminaion & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and as directed.

S&F 12 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice laminated & other side balancing, white lamination, fixed with screws to timber frame work. complete all as specified and as directed.

Extra over rates of 18/19mm thick particle board for external teak wood lipping, 6 mm thick,fixed with nails complete all as specified and as directed.

S&F continuous (piano) hinges, mild steel, bright finish or electro galvanised width of flap 40 mm complete all as specified and as directed.

Supply and fixing 100 mm size hasp and staple, hinge type aluminium anodised complete all as specified and as directed.

S&F brass magnet for cupboard complete all as specified and as directed.

Supply and Fix 100 mm size Alluminium, anodised barrel tower bolts of extruted section and fixed complete all as specified and as directed.

Supply and fix 150 mm size extruded aluminium door handles fabricated type complete all as specified and as directed.

Taking down Mild Steel Ventilators / windows not exc 1 sqm each complete all as directed.

Taking down Mild Steel Windows of exc 1 sqm and n.exc 2 sqm each complete all as directed.

S&F Mild Steel Ventilators with top hung shutter including hinges,steel peg stay complete all as specified and as directed.

S&F Mild Steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, any type, dovetailed or welded complete all as specified and as directed.

S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average with of aperture 1.4 0 mm and fixed with stainless steel wire staples complete all as specified.

S&F in repairs stainless steel wire cloth, 0.36 mm nominal dia of wire and average with of aperture 1.4 0 mm and fixed with stainless steel wire staples complete all as specified and as directed.

M&L for Preparing and applying two coats of synthetic enamel paint over a coat of pink primer on small articles such as brackets not exc 30 cm projection complete all as specified and as directed.

M&L for Preparing new steel and iron surfaces of any description over 10 cm widthor girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed.

M&L for Preparing new wood and wood based surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

Hacking out old broken glass from wooden frame/metal frame or stone concrete or brick with putty or fixed with nail complete all as directed.

Supply and fix sheet glass, ordinary quality, 4 mm thick, in squares not exc 0.50 Sqm in each pane and glazing with oil putty complete all as specified and as directed.

Supply and fix figured glass, pin head type, 4mm thick and glazing with oil putty in squares n.exc 0.50 Sqm in each pane complete all as specified and as directed.

Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc) or blankets, any thickness, including cover fillets complete all as specified and as directed.

M&L 12 mm thick perforated particle board/tiles for insulation and accoustic purpose, 60X60 cm in size, fixed with staples on snap grid in ceiling complete all as specified and as directed.

M&L two coats of distemper oil emulsion over a coat of primer including preparation of new ceiling board surface complete all as specified and as directed.

Taking down the existing steel window shutter for carrying out repair i.e. replacement of unserviceable steel hinges (02 Nos of hinges box type one shutter) and refixed in same position complete including loosening/tightening of hinges and greasing the top and bottom hinges completely and ensure smooth function including making good the damaged surface to match with the adjoing surface complete all as specified and as directed.

S&F 25 mm dia powder coated MS curtain rod with fixing bracket stops and taking down old pipe complete all as specified and as directed.

S&F fancy type curtain rod with brackets fancy type and taking down old complete all as specified and as directed.

M&L welding in repairs n. exc 2.50 cm in length, thickness of metal to be welded exc 6 mm but n. exc 9 mm complete all as specified and as directed.

Supply and fix in repairs 200 mm size extruded aluminium door handles fabricated type complete all as specified and as directed.

Supply and Fix in repairs 150 mm size Alluminium, anodised barrel tower bolts of extruted section and fixed complete all as specified and as directed.

Supply and fix in repairs 150 mm size extruded aluminium door handles fabricated type complete all as specified and as directed.

Supply and fix in repairs alluminium alloy, anodized sliding door bolts 250 mm long with hasp and staple (bolt type) with fixing clips of sheet, cast or extruded sections and fixing bolt and sliding bolts of extruded sections or cast aluminium alloy, ISI marked and fixed complete all as specified and as directed.

S&F in repairs Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixedfixed complete all as specified and directed.

S&F in repairs aluminium dia cast body Door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed complete all as specified and directed.

Taking down and refixing aluminum anodized door shutters with or without frames and repairs of rubber bedding including jointing cleats, easing, greasing and necessary fitting & all accessories complete all as directed by Engineer-in-charge (approx size of door 1.1mx2.1m)

Taking down and refixing aluminum anodized window shutters with or without frames and repairs of rubber bedding including jointing cleats, easing, greasing and necessary fitting & all accessories complete all as directed by Engineer-in-charge (approx size of window 1.1mx2.1m)

S&F Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. all as specified and directed.

S&F Anodised aluminium door shutters, aluminium section weighing 0.55 kg/Rm including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2nos in each door, hinges, anodised aluminium snap beading screws etc.all as specified and directed.

S&F Anodised aluminium window and ventilator shutters, side hung type without sash bars aluminium section weighing 0.55 kg/Rm including necessary joining cleats, glazing clips, rubber neoprene packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1No) hinges type B-21 100mm long (2No) suitable handle (1No) complete all as specified.

S&F 5.5mm thick plain sheet glass glazing any size with rubber packing where ever required complete all as specified.

S&F Anodised aluminium grill any size 10 mm thick complete with frame or channel section including all necessary fittings complete all as specified and as directed.

S&F Mortise lock vertical type 100mm size, 4 levers complete all as specified and as directed.

Demolition of un-reinforced cement concrete not exc. 15 cm thickness in ground/1st floors including floor tile complete including removal of debries to a distance exc. 150 m and not exc. 200 all as specified and directed.

Dismantling of stone slabs of any description or thickness in floors and approns etc, laid ,bedded and pointed in any mortar complete all as specified and as directed.

M & L for 20 to 25 mm thick Machine cut Polished cuddapah stones over cement screed bed 15 mm thick in CM (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete all as specified and directed.

M & L 20 mm thick Granite (of any type) tiles machine cut, bedded over cement screed bed 15 mm thick in CM (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed.

Rounding to edge of stone slab one edge, such on in stop, cooking plateform, and other similar situation complete all as directed.

Dismantling floor, hearth or wall tiling & terrazoo including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and as directed.

M&L Rendering 15 mm thick in cm 1:4 for sunken floor on concrete surface finished fair and even in floor surfaces complete all as specified and as directed.

Supply only liquid water proofing compound for using in sunken floor in cm 1:4 complete all as specified and as directed.

M &L 30 mm thick PCC (1:2:4 ) type B0 using 20 mm graded stone aggregate as in floor complete all as specified and as directed.

M&L plain cement concrete (1:4:8) type D-2 (using 40mm graded aggregate) as in sunken floors complete all as specified and directed.

M&L 30 mm thick PCC (1:2:4 ) type B0 (using 12.50 mm graded stone aggregate) as in floor complete all as specified and directed.

M & L 15mm thick screed bed or bedding layer in CM 1 : 6 for laying of floor tile complete all as specified and directed.

Material and labour non skid colour ceramic tiles of 7 to 8 mm thick (square/rectangular) area pf each the exceeding 0.06 sqm but not exceeding 0.11 sqm of approved 1st quality in floors etc set and jointed in neat cement slurry and pointed with white / coloured cement to match coloured tiles complete all as specified and directed.

M&L Rendering 10 mm thick in cm 1:4 for dado / skirting on brick /stone massonry surface finished fair and even for receiving tiles in vertical surfaces complete all as specified and directed.

M &L Glazed Ceramic tiles coloured, of size 300mm x 200mm x 6 to 7mm thick approved 1st quality as in vertical surfaces such as skirting/ dados and risers to steps etc, set and jointed in neat cement slurry and pointed with white/ coloured cement to match the colour of tiles complete all as specified and directed.

Taking down and refixing of shutters in the same opening after easing etc of any description exc. 1 sqm and not exc. 2 sqm each complete all as specified and directed.

Taking down or down steel tubing and connections 15 mm bore, including cleaning for refixing or removal to store complete all as specified and directed.

All same as per item No. 89 here in before but 20 mm bore -ditto-.

Supply and fix steel water tubing 15 mm bore medium grade galvanized with all fittings such as bends, tees, nipples, elbows, reducers, etc, fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

All same as per item No-91 above but 20 mm dia -ditto-.

Fixing only 15 mm bore old steel water tubing obtained from dismantling with all fittings such as bends, tee, nipples , elbow , reducers, etc., fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

All same as per item No-93 above hereinbefore but 20 mm bore -ditto-.

S&F in repairs stop valves 15 mm bore fancy type, chromium plated, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed to GI pipe complete all as specified and directed.

S&F in repairs 15mm dia Stop valve of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/ 20mm- 92gms) and fixed to GI pipe completeall as specified and directed.

All as per item No 95 above but with long shank and cup (concealed type), (Minimum weight 15mm-110gms/20mm- 112 gms)

S&F in repairs 15mm dia Angle stop valve of PTMT any colour high pressure screwed for iron pipe and fixed, (Minimum weight 15mm-90gms) and fixed to GI pipe complete all as specified and directed.

S&F in repairs Ball valves 15mm dia high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0 m m - 2 1 0 g m s . / 25mm-455gms/ 40mm - 690 gms) and fixed to GI pipe complete all as specified and directed.

S&F in repairs Bottle trap of PTMT 32mm dia having minimum water seal of 25mm .(Minimum weight 32mm-260gms/ 40mm-270 gms) and fixed to GI pipe complete all as specified and directed.

S&F in repairs Grating doom 100mm dia of PTMT (Minimum weight 25gms) complete all as specified and directed.

S&F in repairs Grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40gms) complete all as specified and directed.

S&F in repairs Swivel shower of PTMT any colour for fixing with 15mm pipe. (Minimum weight 40gms) and fixed to GI pipe complete all as specified and directed.

S&F in repairs Shower arm 15 mm size, 195mm long with bend of 45degree with flange of PTMT any colour.(Minimum weight 40gms and fixed to GI pipe complete all as specified and directed.

S&F in repairs Shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 300gms) complete all as specified and directed.

S&F in repairs Towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats.(Minimum weight 190gms) complete all as specified and directed.

S&F in repairs Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) complete all as specified and directed.

S&F in repairs PVC connections 15mm size with PTMT nuts of length 300mm and fixed to GI pipe complete all as specified and directed.

All as per item No-108 above but length 600mm -ditto-.

S&F in repairs Push tap any colour high pressure bore dia 15 mm of PTMT screwed for iron pipe and fixed, (Minimum weight 15mm-47gms/ 20mm- 75gms) and fixed to GI pipe complete all as specified and directed.

All as per item above but suitable for urinals, (Minimum weight 15mm-50gms) and fixed to GI pipe complete all as specified and directed.

S&F in repairs concealled stop valves 15 mm bore fancy type, chromium plated, with long shank and cup, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed to GI pipe complete all as specified and directed.

S&F in repairs Bib tap 15mm dia standard of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/20mm- 125gms) and fixed to GI pipe complete all as specified and directed.

All as per item No-113 above but fancy type, (Minimum weight 15mm-105gms)-ditto-.

All as per item No-114 above but with long body. (Minimum weight 15mm-120gms)-ditto.

Supply and fix in repairs 15 mm bore bib tap brass chromium plated fancy type with crutch or butterfly handle screwed down, screwed for iron pipe fixed to GI pipe complete all as specified and directed.

Supply and fix in repairs vitreous china ware wash hand basin 550mm x 400 mm size, white, flat back or angle including removing the existing one complete and refixing with new bracket and making good complete all as directed.

Supply and fix in repairs 32 mm dia bore Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end complete all as directed.

All as per item No-118 above but size of 40 mm dia -ditto-.

All as per item No-119 above but size of 50 mm dia -ditto-.

S&F waste coupling with pipe of PTMT full threaded suitable for urinals (minimum weight of 45 grms)

Supply and fix in repairs 15mm bore pillar taps CP brass chromium plated fancy type screwed down high pressure with chromium plated screwed shanks and fly nuts complete screwed for iron pipe complete all as specified and directed.

Supply and fix in repairs 15mm bore Pillar taps of PTMT any colour high pressure screwed for iron pipe and fixed.(Minimum weight 15mm-110gms) complete all as specified and directed.

All as per item No-123 above but fancy type.(Minimum weight 15mm-120gms) complete all as specified and directed.

Supply and fix in repairs vitreous china squatting pan orissa pattern size 580 mm x 440 mm white with integral foot rests including provision of concrete bedding complete all as specified and as directed.

Supply and fix in repairs vitreous china wash down water closet pan (Pedestal type), white including removing the existing one complete and making good all connections complete all as specified and as directed

S&F in repairs white /black plastic seat cover solid confirming to ISI any type complete all as specified and directed.

Supply and fix in repairs 10 Litre capacity PVC low level flushing cistern with ball valve and handle/push button 32mm dia PVC flush pipe including taking down unserviceable cistern complete all as specified and directed.

Supply and fix in repairs 15 mm bore LDPE pipe 45cm long with brass nuts and washers on both ends.

All as per item No-129 above above but 60 cm long -ditto-.

S&F in repairs brass CP shower rose with arms 75 mm size fixed to pipe.

S&F in repairs brass 3 way CP mixer 15 mm bore for mixing hot and cold water screwed down for iron pipe and fixed to GI pipe complete as specified and directed

S & F in repairs 75mm dia PVC (SWR) floor trap plain with grating including jointing to waste pipe fixed in solvent cement or cement concrete 1:2:4 type B1 complete all as specified and directed.

S & F in repairs PVC(SWR) gully trap 125/110mm, setting and jointing with solvent cement.

S&F in repairs brass chromium plated health faucet 15mm dia reinforced pipe fitted to GI pipe.

S&F PVC toilet cup board cabinet, with shutters having mirror on shutter of size 47cm x 35cm x 15cm complete all as specified and as directed.

S&F in repairs brass CP two way tap screwed down for iron pipe suitable for 15 mm dia bore of pipe complete all as specified and as directed.

S & F repairs stainless steel plate rack of minimum size 970x770x230mm of standard quality,fixed to wall with wooden gutties and screws complete all as specified and directed.

S & F in repairs stainless steel kitchen sink without draining board made of stainless steel 1mm thick,coupling plug, washers and waste pipes including bedding in cement mortar on to dwarf wall or including fixing cantelever brackets and connecting union to pipe, overall size 610 mm X 460 mm, bowl size 560 mm X 405 mm X 203 mm complete all as specified and directed.

S & F in repairs stainless steel kitchen sink with draining board made of stainless steel 1mm thick,coupling plug , washers and waste pipes including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 940 mm X 460 mm and bowl size 405X354X203 mm complete all as directed .

Dismantling of existing PVC 500-1000 ltrs water tank complete all as specified and directed.

S & F 500 Ltrs capacity Rotational moulded, polythene water storage tanks incl suitable nipple( cylindrical shape with vertical top closed) hoisted and fixed in position complete all as specified and directed

All as per item No- 142 above but capacity of 1000 ltrs -ditto-.

S&F in repairs 20 mm bore dia ball valves, high pressure of PTMT with epoxy coated aluminium rod & high dencity plasstic ball screwed for iron pipe and fixed .(minimum weight 15 mm-142gms/20mm-210gms) complete all as specified and directed.

S&F in repairs Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for 20 mm bore pipe complete all as specified and directed.

Cutting existing steel tubing for alterations or additions of 20 mm bore.

cutting of stone massonry wall for concealed water tubing and making good, cutting not exc 10 cm girth complete all as directed.

cutting of brick massonry wall for concealed water tubing and making good, cutting not exc 10 cm girth complete all as directed.

saradhi construction combines

AMK Builders