Providing and laying DBM and BC work over 45mtr wide road left and right side carriageway around pocket -U in sector -20 YEA. WC-02

Clearing jungle including uprooting of rank vegitation, grass, brush wood, trees and saplings of girth up to 30cm measured at a height of 1m above ground level and removal of rubbish upt to a distance of 50m outside the periphery of the area cleared (for patri dressing) UPPWD/SOR-2020/259

Providing, Laying, Spreading & compacting graded stone aggregate to Wet Mix Macadam specification including Premixing the material with water at OMC in Mechanical mix plant carriage of mixed material by tipper to site, laying in uniform layers with paver in sub-base/bace course on well prepared surface & compacting with vibratory roller to achieved the desired density as per technical specification clause 406 of MORTH (AR)

Tack Coat : Providing and applying tack coat with VG.10 Pressure distributor at the rate of 0.25 kg per sqm on the prepared bituminous/granular surface cleaned with Mechanical broom. MORTH/503(UPPWD/SOR-2020)

Dense Bituminous Macadam Concrete : Providing and Laying dense grade bitumen macadam with 100-120 TPH batch type HMP producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder 60/70 @ 4.25% of mix and filler transporting the hot mix to work site, laying with hydrostatic paver finisher with sensor control to the required grade, level, and alignment rolling with smooth, wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause 507 complete in all respects MORTH/503(UPPWD/SOR-2020 50mm compacted thickness with bitumen penetration of 60/70 @ 4.25% by weight of total mix.

Bituminous Concrete: Providing and laying betuminous concase with 100-120 TPH batch type hot mix plant producing an average output of 75 tonnes per hour using crused aggregates of specified grading, premixed with betuminous binder @ 5 % of mix and fillar transporting the hot mix to work site. laying with hydrastatic paver finisher with sencer control to the required grade, level and alignment rolling with smooth, wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause 509 complete all in respect, Morth 503 (UPPWD-SOR-2020) 40mm compacted thickness with bitumen penetration of CRMB-55 @ 5% by weight of total mix

Brick work with F.P.S. bricks of class designation 150 in foundation and plinth in: Cement mortar 1:4(1 cement : 4coarse sand) UPPWD/SOR-2020)/6.1.1

Providing and laying in position cement concrete of specified grade excluding the cost of centring and Shuttering-All work upto Plinth level. 1.4.8(1cement :4coarse sand : 8 graded stone aggregate 40mm nominal size) UPPWD/SOR-2020)/4.1.8

Providing and laying at or near ground level factory made kerb stone of M-30 grade cement in position to the required line, level and curvature jointed with cement mortar 1:3(1 cement: 3 coarse sand) including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm) including making drainage opening wherever required complete etc. as per directon of Engineer-in-charge (length of finished kerb edging shall be maesured for payment) (Precast C.C. kerb stone shall be approved by Engineer-in-charge) UPPWD/SOR-2020/16.69

12mm cement plaster of mix 1:6(1 cement : 6 coarse sand) UPPWD/SOR-2020/13.4.1

White washing with lime to give an even shade: New work (three or more coats) UPPWD/SOR-2020/13.37.1