GE (AF)/SGR-02/2025-26 PROVISION OF CERTAIN BR AND EM WORKS AT CERTAIN MD ACCN AT AF STN SRINAGAR UNDER GE (AF) SRINAGAR

Amount

Schedule 'A' Part-I (B/R Work)

Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc. complete all as specified and directed.

M&L for brick work with sub-class `B' bricks, straight or curved on plan exceeding 6m mean radius built in CM 1:4, Complete all as specified and directed.

M&L for brick work with sub class 'B' bricks straight or curved on plan to any radius in half brick thick wall radius, built in CM 1:6, complete all as specified and directed.

Taking down cement or cement lime plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water etc., complete all as specified and directed.

M&L 15mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:6 and finishing even and smooth without using extra cement, complete all as specified and directed.

M&L 15mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:4 and finishing even and smooth without using extra cement, complete all as specified and directed.

M&L 15mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:4 and finishing even and smooth without using extra cement using integral water proofing compound, complete all as specified and directed. (WPC shall be measured and paid separately).

M&L 10mm thick rendering on fair faces of brick work or concrete surfaces of ceiling in CM 1:3 and finishing even and smooth without using extra cement, complete all as specified and directed.

Supply only integral water proofing compound, complete all as specified and directed.

Preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of alkali resistant primer, complete all as specified and directed.

Preparation of new plastered surfaces of walls and applying two coats of anti-fungal exterior emulsion paint over a coat of cement primer including thin layer of wall care putty, complete all as specified and directed.

Preparation of new plastered surfaces on ceiling and applying two coats of white wash, complete all as specified and directed.

Complete removal of existing treatment from wall surfaces and applying two coats of oil bound distemper of approved colour including applying 1mm thick JK Birla wall care putty for making the surface even and smooth and filling the uneven and small holes and making the edges of plaster properly by plaster of paris preparatory to distempering including preparation of surface by washing rubbing down and stopping of distempered surfaces, complete all as specified and directed.

Complete removal of existing treatment on plastered surfaces of walls including washing, rubbing down and stopping of old treatment including thin layer of wall care putty and applying two coats of anti fungal exterior emulsion paint over a coat of cement primer, complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any description in any position, complete all as specified and directed.

M&L for plain cement concrete, 1:5:10, Type E-2 (using 40mm graded crushed stone aggregate) as filling in Sunken portion, complete all as specified and directed.

M&L for applying two coats of SHALIMER SUPERCRETE / NITOBOND / Dr Fixit water proofing coating on the entire surface of sunken portion, complete all as per manufacture's instruction, complete all as specified and directed.

M&L for 15mm thick cement screed in CM 1:3 admixed with integral water proofing compound FOSROC's complast X 421 IC @ 130 ml per bag of cement including a bonding coat of FOSROC's Nito bond AR cement slurry/STP NO 1 liquid @ 200ml per bag, complete all as specified and directed.

S&F 40mm bore mild steel galvanised iron tubing, medium grade, cut to size and fixed as spout pipe in sunken floor of toilet, complete all as specified and directed.

M&L for 25mm thick plain cement concrete, 1:2:4, type B-1 (using 20 mm graded crushed stone aggregate) as in sub base, complete all as specified and directed.

Dismantling of floor hearth or wall tiling including cement mortar bedding but not backing removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed.

M&L for Non skid ceramic coloured tiles 7 to 8mm thick (square / rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. Set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15mm thick screed bed in CM 1:6, complete all as specified and directed.

M&L for Glazed ceramic tile 300x600x06-7mm thick (coloured) on vertical surfaces such as wall, dados etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 10mm thick screed bed in CM 1:4, complete all as specified and directed.

M&L for Light shade Vitrified Ceramic tiles 8 to 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM 1:6, complete all as specified and directed.

M&L for Light shade Vitrified Ceramic tiles 8 to 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in Skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick backing coat CM 1:4, complete all as specified and directed.

Taking down Chowkhats or frames with shutters (without taking off shutters from the frames) n exc. 1.5 Sqm and credited to the contractor, complete all as specified and directed Note: The damaged portion of the tiles / rendering shall be made good with the same material to match with the adjacent surface.

Taking down Chowkhats or frames with shutters (without taking off shutters from the frames) exc. 1.5 Sqm but n exc 4.0 Sqm and credited to the contractor, complete all as specified and directed Note: The damaged portion of the tiles / rendering shall be made good with the same material to match with the adjacent surface.

S&F for pressed steel frame made out of mild steel 1.25mm thick sheet, with size of frame 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc. and applying a shop coat of red oxide primer including providing PCC 1:3:6, type C-0 (using 12.5mm graded crushed stone aggregates) as in back filling of pressed steel frame, complete all as specified and directed.

S&F for pressed steel frame made out of mild steel 1.25mm thick sheet, with size of frame 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc. and applying a shop coat of red oxide primer including providing PCC 1:3:6, type C-0 (using 12.5mm graded crushed stone aggregates) as in back filling of pressed steel frame, complete all as specified and directed.

S&F 30mm thick 2nd class softwood plain framed panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board with commercial face veneers, complete all as specified and directed.

S&F 35mm thick 2nd class hardwood, factory made, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc. sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a), complete all as specified and directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying and fixing in opening, complete all as specified and directed.

S&F 30mm thick Factory made Solid Panel PVC Door Shutter (style) consisting of frame made out of M.S. tubes for top and bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing, complete all as specified and directed.

S&F 250mm aluminium alloy, anodised, sliding door bolt with hasp, staple & fixed clips of sheet, cast or extruded section & fixed bolts & sliding bolts of extruded section or cast aluminium alloy, complete all as specified and directed.

S&F 150mm size Aluminium handles, cast type, anodised, complete all as specified and directed.

S&F 150mm size Aluminium anodised, barrel tower bolts of extruded section, complete all as specified and directed.

S&F 100mm size Aluminium handles, cast type, anodised, complete all as specified and directed.

S&F 100mm size Aluminium anodised, barrel tower bolts of extruded section, complete all as specified and directed.

S&F 100mm long medium weight, cold rolled mild steel Butt hinges, complete all as specified and directed..

S&F door strip comprising of aluminium holds & rubber strip fixed at bottom of door shutter with screws, complete all as specified and directed.

S&F 300mm mild steel ordinary rat tail pattern springs for door including rollers and roller plate, complete all as specified and directed.

Preparation of old steel surface and iron surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint , complete all as specified and directed.

Preparation of new wood and wood based surfaces of any description exc 10cm with or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed.

S&F mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18 in steel / wooden shutter of door & windows, complete all as specified and directed.

S&F aluminium powder coated aluminium window having three track (minimum thickness of powder coating 50 micron) with aluminium section 92mm X 31.75mm (Weight bottom section 1.070 kg/m, top section 0.933 kg/m, shutter section 40mm X 18mm (weight of handle section 0.417 kg/m) interlock 0.547 kg/rm mounted on bearing to slide on tracks plain anodized in approved shade including supply and fixing of 5mm thick sun / heat reflected glass and wire mesh, PVC track gasket, EPDM rubber gasket on glass of weather tightening along with locks, handle including sealing gap with marble surfaces with silicon sealants making it water proof in all manner etc. complete all as specified and directed.

S&F aluminium powder coated ventilator (minimum thickness of powder coating 50 micron) having fixed glass with aluminium section having section 50.80mm x 25.40mm (weight 0.489 kg/m) glazing clear section (weight 0.109 kg/m) with plain anodized including supply and fixing of 5mm thick sun / heat reflected glass making frame and glass water tightening making it good etc., complete all as specified and directed.

S&F Powder Coated aluminium frame for doors, windows, ventilators (minimum thickness of powder coating 50 micron) with one or more rebates including joining cleat for fixing etc., complete all as specified and directed.

S&F for powder coated aluminium grill (Thickness or powder coating not less than 50 micron) of approved design / pattern, with approved standard section and fixed to the existing window frame with C.P. brass / stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved powder coated aluminium standard section around the opening, complete all as specified and directed.

S&F in repairs 20mm dia stainless steel drapery curtain rods including brackets, end finials (Latoo), for curtain rails fancy decorative type and fix with brass screws to walls approved quality etc., complete all as specified and directed.

S&F 18-19mm thick block board, grade-2 quality, interior grade, commercial type, fixed with screws to timber framework as in kitchen drawers, cupboard shutters etc., complete all as specified and directed.

S&F 0.90mm thick decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions, complete all as specified and directed.

S&F 100mm stainless steel, fancy type, round D drawer cabinet handles, including all fitting, complete all as specified and directed.

S&F 60mm stainless steel hinge, fancy type, self closing Italian patter suitable for cabinet and shelves opening / closing operation, complete all as specified and directed.

M&L for 3mm thick PVC edge lipping fixed with nails for 18/19 mm thick prelaminated particle board & shutters etc., complete all as specified and directed.

S&F of Magnet of suitable size fixed for cabin leafs, drawers etc., complete all as specified and directed.

S&F stainless steel telescopic channels roller of size 25mm x 12mm, 450mm length (when close) with male female rolling brackets suitable for baskets, complete all as specified and directed.

S&F stainless steel 304 grade perforated cutlery basket of size 520mm width, 485mm depth and 100mm height, complete all as specified and directed.

S&F stainless steel 304 grade Cup & Saucer basket of size 520mm width, 485mm depth and 100mm height, complete all as specified and directed.

S&F stainless steel 304 grade designer plate basket of size 520mm width, 485mm depth and 150mm height, complete all as specified and directed.

S&F Stainless steel 304 grade designer pull out basket of size 810mm width, 485mm depth and 200mm height, complete all as specified and directed.

S&F GI frame work of size 605 x 605mm for seamless ceiling comprising of Gl perimeter channel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 45 mm centre to centre/intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre including supply and fixing 12mm thick Gypsum Board (water proof) fixed with screw or as per manufacturers instructions and jointing and finishing to a flush finish of tapered and square edges other board any other joints with recommended jointing compound over jointing tapes, finishing with one coat of primer and two coats of oil emulsion distemper over a coat 2mm thick wall care putty including taking down existing ceiling, complete all as specified and directed.

Demolition of reinforced cement concrete of any description in any position not otherwise specifically provided for, Complete all as specified and directed.

M&L for Reinforced cement concrete, 1:2:4, Type B-1 (using 20 mm graded crushed stone aggregate) for Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and directed.

Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work for fair finished surface, exceeding 200m thick (Horizontal or sloping), complete all as specified and directed.

Use and waste of formwork to edge of concrete flats exc 5cm but n exc 10cm wide, complete all as specified and directed.

M&L for MS TMT bars 10mm dia and over, cut to length bent to shape required including cranking, bending spirally for hooking for columns, hooking ends and binding with and including mils steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.

M&L for 18-20mm thick granite (of any type) work (table rubbed and polished) as in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15mm thick screed bed in CM 1:4, complete all as specified and directed.

M&L for 20-25mm thick machine cut kota stone slab as in riser of steps, skirting, dado and pillar jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing & polishing over and including 10mm thick backing coat in CM 1:4, complete all as specified and directed.

Taking up or down 15mm bore steel tubing and connections, including cleaning for refixing or removal to store, complete all as specified and directed.

Taking up or down 20mm bore steel tubing and connections, including cleaning for refixing or removal to store, complete all as specified and directed.

S&F for 15mm bore tubes, medium grade, galvanised, with all fitting, ( such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs, unions etc.) and fixed complete to and ceiling with clips, wall hooks, wooden plugs or laid in floors including screwing and waste and for forged bends on piping as required, complete all as specified and directed.

Refixing old GI pipe 15mm bore & connections in new or old position to walls and ceiling or laid in floor, complete all as specified and directed.

S&F for 20mm bore tubes, medium grade, galvanised, with all fitting, ( such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs, unions etc.) and fixed complete to and ceiling with clips, wall hooks, wooden plugs or laid in floors including screwing and waste and for forged bends on piping as required, complete all as specified and directed.

Refixing old GI pipe 20mm bore & connections in new or old position to walls and ceiling or laid in floor, complete all as specified and directed.

M&L for Lagging to 20mm bore pipes used in external water supply or plumbing all around with 50mm thick bonded mineral wool pre-formed ‘SNAP ON’ pipe sections of density 144 Kg /Cum conforming to IS 9842 provided with chicken mesh wire netting 25gauge 20mm mesh including applying with brushing neat cement slurry with 3 kg of cement per Sqm complete, complete all as specified and directed.

Taking down eaves gutters and rain water pipes (any size or pattern), including all fitting, heads, shoes, bends, swan necks etc. including cleaning or refixing or removal to store, complete all as specified and directed.

S&F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or floors, complete all as specified and directed .

S&F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or floors, complete all as specified and directed .

S&F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls, complete all as specified and directed .

S&F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls, complete all as specified and directed .

S&F 100/75mm outlet PVC (SWR) floor trap with chromium plated grating including Jointing to waste pipe and fixed in cement concrete 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate), complete all as specified and directed.

S&F 110mm size PVC (SWR) bends of any radius, complete all as specified.

S&F 75mm size PVC (SWR) bends of any radius, complete all as specified.

S&F 75mm bore PVC (SWR) junction single, (Single T) equal or unequal with access door, complete all as specified and directed.

S&F 110mm bore PVC (SWR) junction single, (Single T) equal or unequal with access door, complete all as specified and directed.

S&F 75mm bore PVC (SWR) reducer, complete all as specified and directed.

S&F 75mm bore PVC (SWR) vent cowl, complete all as specified and directed.

S&F in repairs vitreous china wash hand basin, white flat back, size of 550x400mm including cutting for and pinning in ends of brackets (including supply and fixing of brackets) or erecting stand, 32mm brass chromium plated waste fitting with long screwed shank and fly nut flanged end bedded in red led cement, chain and plug and porcelain stopper, complete all as specified and directed.

S&F in repairs 15mm bore hot and cold water mixer with swan neck for WHB chromium plated quarter turn screwed down, including necessary fittings, complete all as specified and directed.

S&F in repairs 15mm size sink mixer for mixing hot & cold water, cast copper alloy chromium plated with capstan heads, high pressure, with long screwed shanks and fly nuts, screwed for iron pipe, complete all as specified and directed.

S&F in repairs 15mm bore chromium plated wall mixer 3-in-1 system wall mixer with overhead and hand shower arrangement with connecting legs, wall flanges and wall bracket for hand shower, complete all as specified and directed.

S&F in repairs sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x160mm, complete all as specified and directed.

S&F waste coupling of PTMT (half or full threaded), minimum weight 60gms, suitable for discharge pipe of 40mm bore dia, complete all as specified and directed.

S&F waste pipe 40mm fixed to sink, completed all as specified and directed.

S&F mild steel jet spray to be fitted with EWC, completed all as specified and directed.

S&F in repairs Vitreous china squatting pan, Orissa pattern, size 580 x 440mm and making good, including connection to trap, and to flushing pipe, anti-syphonage pipe, etc., including trap set in and including concrete, complete all as specified and directed.

S&F in repairs 10 litre capacity PVC valveless, Syphonic action type, flushing cistern low level, white with inlet ball valve, float and handle including brackets and PVC flush pipe etc., complete all as specified and directed.

S&F in repairs 15mm bore bib tap, cast copper alloy, chromium plated, fancy type, long body with crutch or butterfly handle, screwed for iron pipe or for brass ferrule, complete all as specified and directed.

S&F in repairs 15mm bore Stop valve / angle valve, cast copper alloy, chromium plated, fancy type, screwed down high pressure with capstan head, complete all as specified and directed.

S&F in repairs 15mm size PVC connections with PTMT nuts of length 600mm, complete all as specified and directed.

S&F in repairs brass chromium plated tubular towel rail 20mm dia "D" type 60cm long between flanges, complete all as specified and directed.

S&F in repairs soap dish, brass chromium plated, fancy type, fixed to plugs with chromium plated brass screws, complete all as specified and directed.

S&F in repairs Kitchen plate rack made of stainless steel 1mm thick with plugs washers as overall size of 900mm x 975mm including fixing to wall and all accessories, complete all as specified and directed.

S&F in repairs 15mm bore shower roses chromium plated with chromium plated arms, complete all as specified and directed.

S&F 6mm thick glass corner shelves, fancy type, 225x225mm size, complete all as specified and directed.

S&F 500 litres capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including dismantling existing water tank and removing from site, complete all as specified and directed.

S&F 20mm bore ball valves high pressure of PTMT (Minimum weight 20mm - 210 gms)with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed, complete all as specified and directed.

Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings, complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws, complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws, complete all as specified and directed.

Excavating in post holes (or similar holes) each not exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance not etc. 50m and making good surface, work in soft/loose soil, complete all as specified and directed.

M&L for plain cement concrete, 1:3:6, type C-2 (using 40 mm graded crushed stone aggregate) as in posts, walls or retaining walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars (including caps and bases) including necessary form work, complete all as specified and directed.

M&L for structural steel work as in truss, rafter purling, made out of angle / Hollow pipe / tube section including jointing cleats, plates flat iron, gusset plates, rails, braces etc. conforming to Fe 410-W (gde-E-250) Quality, confirming to IS-1161-1979 of grade St-240 complete all as specified and as directed.

Dismantling of timber scantlings 40 sqcm and over in section, in any position including rafters and purlins framed work, complete all as specified and directed.

M&L for second class hardwood in scantlings frame work, wrought, complete all as specified and directed.

S&F 40mm thick second class hard wood, clean sawn planks, width n exc. 20cm fixed in existing wooden slab, complete all as specified and directed.

M&L for filler coat with grey filler or liquid wood filler, transparent, and bringing grinding of existing wooden surfaces to smooth even finish, complete all as specified and directed.

M&L for French polishing on surfaces of any description width or girth including cleaning and preparing the surface including a coat of wood filler on new wooden works with two or more coats, complete all as specified and directed.

M&L for French polishing on surfaces of any description width or girth including cleaning and preparing the surface including a coat of wood filler on old wooden works with one or more coats, complete all as specified and directed.

M&L for 75mm thick plain cement concrete, 1:3:6, type C-2 (using 40mm graded crushed stone aggregate) as in plinth protection, finished even and smooth without extra cement, complete all as specified and directed.

Excavation in trenches n exc 1.5m wide and n exc 1.5m deep and getting out in soft / loose soil, complete all as specified and directed.

Returning, filling in including spreading, levelling, watering and well ramming in layers n exc 25cm, complete all as specified and directed.

Removal of excavated soil to a distance n exc 50m and depositing where directed at a level n exc 1.5m above the starting point, complete all as specified and directed.

M&L for plain cement concrete, 1:4:8, Type D-2 (using 40 mm graded crushed stone aggregate) in foundations, filling and mass concrete, complete all as specified and directed.

S&F 150mm bore, HDPE double wall corrugated Pipe in any length with rubber ring joints, laid in trenches for sewage pipe including demolition and breaking up existing drain pipes with PCC packing under hunching and bedding, complete all as specified and directed.

M&L for concrete bed to 150mm bore drain pipes including packing under, and haunchings against the sides of pipes after they are laid in cement concrete, 1:3:6, type C-2 (using 40mm graded crushed stone aggregate) and tested, complete all as specified & directed.

M&L for Extra over for forming fair finished to drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred / stopped ends etc., complete all as specified and directed.

M&L for Precast reinforced cement concrete, 1:2:4, type B-1 (using 20 mm graded crushed stone aggregates) as in cover slab for soakage well / manhole and similar works supported on walls including necessary formwork and set in cement mortar 1:4, complete all as specified and directed.

M&L for plain cement concrete, 1:2:4, type B-0 (using 12.5mm graded crushed stone aggregates), as in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railing upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed.

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished and reforming benching as required for 150mm internal dia of pipes, complete all as specified and directed.

Surface excavation not exceeding 30cm deep and averaging 15cm deep and getting out in soft/loose soil, complete all as specified and directed.

M&L for Hard core of broken stone gauge not exceeding 63mm deposited, spread and levelled in layers not exceeding 15cm thick, watered and rammed to a true surfaces, complete, all as specified and as directed.

M&L for 75mm thick plain cement concrete, 1:4:8, type D-2 (using 40 mm graded crushed stone aggregate) as in sub base, complete all as specified and directed.

M&L for machine pressed glossy finished 25mm thick coloured cement concrete chequered tiles of size 300mm x 300mm of pattern as approved, set, jointed and pointed in neat slurry in floors over and including 15mm thick screed bed or bedding layer in CM 1:6, complete all as specified and directed.

M&L for filleting in any position and to any shape in cement mortar 1:3 or cement concrete 1:2:4 including all mitres, steps etc. section of fillet exc 25 sqcm but not exc 50 sqcm, complete all ass specified and directed.

Schedule 'A' Part-II (E/M Works)

Taking down carefully (copper/aluminium) unsv point wiring complete of any type (batten/surface conduit or concealed) for light point, fan point, bell point, socket point or power point including fixture and fitting such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing material to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good the disturbed surfaces of wall/floor or ceiling to match with existing surface and finishing the surfaces as per existing, complete all as specified and directed.

M&L for Point wiring for one light /ceiling / exhaust fan point controlled by one way switch on Independent board with 1.5 Sqmm PVC insulated and unsheathed fire retardant low smoke and halogen (FRLSH) copper conductor single core multi stranded copper cable confirming to IS:694 (2010) using approved colour code for phase and neutral as per IS code drawn through non metallic PVC rigid concealed conduit heavy mechanical stress (HMS) grade in accordance with IS:9537 (Part 3) having wall thickness not less than 2.0mm thick and minimum 20mm external dia but shall be increased as per actual site requirement in accordance with clause No 19.125 of SI Part I ( ISI marked) including conduit accessories like bends, tees, junction boxes etc. with all accessories suitable for modular / conventional type fitment, provision for fixing of modular flush boxes of appropriate size and dimensions for fixing of piano switches / sockets / regulator etc., including PVC insulated and unsheathed FRLSH 1.5 Sqmm multi stranded copper conductor cable (green colour) as continuous earth lead wire connected to common earth and earth dolly, complete all as specified and directed. Note: (i) For concealed point wiring cutting chases for conduit shall be measured and paid separately (ii) For sinking boxes cutting chases for conduit shall be measured and paid separately

All as per Ser item No 138.00 here in above but for One bell / buzzer point controlled by one 5 Amp bell push switch.

All as per Ser item No 138.00 here in above but for 05 Amp socket outlets point controlled by one switch on same board.

All as per Ser item No 138.00 here in above but for 05 Amp socket outlets point controlled by one switch on Independent board.

All as per Ser Item No.138.00 here in above but for 15 Amps multipurpose socket outlet controlled with one way switch on independent board wiring with 2.5 Sqmm multi-stranded copper conductor PVC insulated, unsheathed fire retardant low smoke, cable and 2.5 Sqmm multi-stranded copper conductor PVC insulated, unsheathed fire retardant low smoke, cable as earth wire connected to common earth dolly.

S&F Modular cover plate with frame as per site requirement for following module:-

2 Module

3 Module

4 Module

6 Module

8 Module

S&F Modular metal Flush box as per site requirement for following module:-

1/2 Module

3 Module

4 Module

6 Module

8 Module

M&L for Modular switch 1 way, 6 Amp, 230 volts ,1 Module, complete all as specified and directed.

M&L for Modular bell push switch 1 way, 6 Amp, 230 volts ,1 Module, complete all as specified and directed.

M&L for Modular switch 1 way, 16/20 Amp, 230 volts ,1 Module, complete all as specified and directed.

M&L for Modular socket 6 Amp, 230 volts, 2/3 Pin universal, 2 Module, complete all as specified and directed.

M&L for Modular socket 16 Amp, 230 volts, 2/3 Pin universal, 2 Module, complete all as specified and directed.

S&F bell electric AC, 230V, single phase , ding dong type, complete all as specified and directed.

S&F Ceiling rose, surface bakelite 65 x 50 mm, 3 terminals fixed on PVC Round Block, complete all as specified and directed.

S&F Lamp holder, white polycarbonate body, with back plate suitable for batten fittings fixed in position & connecting, complete all as specified and directed.

S&F 5 watt LED lamp capacity 450 lumen complete all as specified and directed.

S&F energy efficient 20 watt LED integrated batten type luminaires suitable for wall or ceiling mounting with built in LED Chip & integral LED driver, Aluminium channel housing & Polycarbonate diffuser of length 1200 mm (approx.), colour temperature 6500 K or as directed, luminaire efficacy not less 100 lm/W with all accessories, fixing arrangement internally pre-wired, making all connection using 1.5 Sqmm copper conductor multistrand PVC insulated cable from ceiling rose to fitting drawn through PVC flexible conduit complete fixed in position & connecting, complete all as specified and directed.

S&F 10 watt LED light fitting mirror type with high out put diffuser 2 feet, 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete making all connection using 1.5 Sqmm copper conductor multistrand PVC insulated cable from ceiling rose to fitting drawn through PVC flexible conduit, complete all as specified and directed.

S&F 10 watt LED Bulk Head type with high out put, 220 V AC, colour temperature 6500 K or as directed, Lumens 1000 lm with all accessories ,IP 65 protection dust and water resistant ,surge protection up to 2.5kV, PC opal high efficiency diffuser, LM 80 tested made die cast aluminium housing with complete assembly, suitable for surface/wall mounted with driver holder including connecting up using 1.5 Sqmm copper conductor multistrand PVC insulated cable of suitable size, complete all as specified and directed.

S&F LED luminaire 600mm x 600mm, 35/36 Watt, 220V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holder & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size, complete all as specified and directed.

M & L for disconnecting all water and electric connections of geysers and taking down carefully installed storage type electric geysers of any capacity of any make / type / size (horizontal / vertical) lowering and place at site, complete all as specified and directed.

S&F 25 Litre capacity electric water heater (geyser), storage type steel body with copper inner tank and heating element upto 2KW, BEE 5 star rated complete with all accessories such as safety valve, thermostat, NRV,connection piece etc., complete all as specified and directed.

M & L for taking down carefully ceiling fan any type, sweep and make, complete all as specified and directed.

S&F ceiling fans complete with blades, down rods, electronic regulator and accessories 230V, 1200 mm sweep, minimum air delivery 210 CFM with service value 6.00, BEE 5 star rated with brushless direct current motor (BLDC), complete all as specified and directed.

M & L for taking down carefully exhaust fan of any make any capacity, sweep, complete all as specified and directed.

S&F exhaust fan, made of sturdy engineering plastic, 300mm sweep, complete with louvers shutter, voltage 230V, 50Hz, RPM 1200, copper winding, complete all as specified and directed.

S&F Sheet metal enclosure MCB distribution board single pole & neutral, 240 volts, 08 way with IP-43 IK-09 protection double door complete with 200 Amps bus bar and neutral link, fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification, complete all as specified and directed.

S&F sheet metal enclosure distribution board, double door type, as per IEC 61439-3 (CRCA sheet) dust and vermin proof MCB DB, TPN 4 way with 200 Amps rated copper busbar, 415 Volts with in built MCCB 125 Amps, 16KA, 2 neutral bar and 2 earth bar IP 54 protection, cable ties for cable management (fully insulated busbar and shrouded neutral bars), reversible door for IP 43 & IP 54, flush mounted to wall, complete all as specified and directed.

S&F MCB of single poles and current carrying capacity 6 to 32 Amp, 240V, 10 KA 'C' curve, in the MCB DB complete with connection testing and commissioning, complete all as specified and directed.

S&F MCB of single poles and neutral and current carrying capacity 40-63 Amp, 240V, 10 KA 'C' curve in the MCB DB complete with connection testing and commissioning, complete all as specified and directed.

Earthing complete with galvanized mild steel earth plate electrode size 600mm x 600mm x 6mm thick buried directly in ground (preferably in vertical position) earth pit not less than 2.25 meter below normal ground level with top edge of the earth plate not less 3 meter (BGL) connected to galvanized iron earth lead wire 4mm dia by means of bolts, nuts, check nut and washer of galvanized iron including PCC pit in RCC 1:2:4 type B-1, precast RCC cover with suitable handle, excavation and earth work in any type of soil, 20mm bore “medium grade” galvanized iron water tubing fixed with cast iron funnel and wire mesh and 15mm bore “light grade” galvanized iron protection pipe for earth lead wire up to 7.5m length, charcoal, common salt, complete all as shown in EP No 3 of SSR 2009 Part-I, connected to test point complete, all as specified and testing on completion. Note: (i) The unit rate includes main earthing lead/strip from earth electrode to test point up to 7.5 meter (ii) In case measured value of earth resistance is recorded more than 1.0 ohms then the earthing shall be re done by the contractor without any extra cost to the department.

Sub main wiring with three runs of single core PVC insulated multistrand un-sheathed FRLS cable of size 4.0 Sqmm with stranded copper conductor, drawing into concealed PVC conduit / surface batten (including PVC conduit of requisite dia and accessories) with one run of continuous PVC insulated multistrand unsheathed FRLS cable earth wire of size 4.0 Sqmm (in green colour) including taking out unserviceable sub main wiring, complete all as specified and directed. Note : Note : 3 runs of 4 Sqmm copper cable & 1 run of 4 Sqmm copper cable in and including 25mm PVC conduit shall be measured as one unit.

Sub main wiring with three runs of single core PVC insulated multistrand un-sheathed FRLS cable of size 6.0 Sqmm with stranded copper conductor, drawing into concealed PVC conduit / surface batten (including PVC conduit of requisite dia and accessories) with one run of continuous PVC insulated multistrand unsheathed FRLS cable earth wire of size 6.0 Sqmm (in green colour) including taking out unserviceable sub main wiring, complete all as specified and directed. Note : Note : 3 runs of 6 Sqmm copper cable & 1 run of 6 Sqmm copper cable in and including 25mm PVC conduit shall be measured as one unit.

Supply, laying, jointing, testing XLPE insulated PVC sheathed with stranded aluminium conductor heavy duty, size of cable 16 Sqmm 4 core, conforming to IS 1554 Part I / ISI marked, including cable glands , cable lugs etc., to suitable the cable size, cables to be laid in trenches, fixed along the poles bare or through GI pipe laid under floors road etc. fixed concealed in walls encased in GI pipe etc. including taking out unserviceable cable, complete all as specified and directed.

M&L for sand cushioning in trenches spreading and consolidation 8 cm thick before laying the cable and 15 cm of the sand after laying the cable but will be measured 18 cm after punning etc., complete all as specified and directed.

M&L for laying of bricks well burnt sub class B (old size) laid flat for cable protection width equal to the length of bricks, complete all as specified and directed

S&F 40mm dia galvanised steel tube, light grade, for protection of copper strip / cable at wall and duct / road / trench, complete all as specified and directed.

S&F Bracket made out of 40mm dia GI pipe, light grade, 1.5m long bend to an angle of 120 degree with 02 Nos MS clamp 50mm x 50mm and 04 sets of nuts, bolts and washers painting with two coats of synthetic enamel paint over a red oxide primer, complete all as specified and directed.

S&F LED Street Light fitting 35 Watt, for operating voltage between 110V to 320V system efficiency not less than 120 lumen / Watt, PF-0.95 minimum, IP-66 protection, 5700CCT(K), CRI between 80-85, confirming to LM79 and LM 80 standards or as per IS-16104:2012 and IS-16106:2012, for estimated life span of minimum 50,000 hrs consisting of high / low voltage cut off, maintenance free isolated Electronic driver circuits, Low THD, PMMA grade high quality Transmittance lens, Epoxy powder coated Die Cast Aluminium housing with LED street optics LENS for uniform light distribution, weather proof gasket for lamp & driver compartment, Heat resistance toughened UV stabilized glass fitted in cast aluminium housing with SS screws with IP 65/66 protection, complete all as specified and directed.

S&F in replacement of LT feeder pillar box, outdoor type, factory made, weather and vermin proof made out from 3.15mm sheet supported with legs 45cm long made of angle iron 50x50x5mm of size 1.2m x1m x 1m with 3 Nos 0.8m Aluminium bus bar of size 40x10mm or 200 Amps for 1100 Volt post Insulator 08 Nos duly drilled hole for LT Cable connection including front and rear side openable with locking arrangement suitable for 1100 V LT and provision for incoming and out going LT cable connection including painting with two coats of smoke grey synthetic enamels paint over a coat of red oxide primer, complete all as specified and directed. Incoming- 250 Amp MCCB-01 Nos. Outgoing- 125 Amp MCCB- 02 Nos. Note:- Feeder pillar box shall be mounted on brick plate form built in (1:4) not less then 60 cm above ground level with suitable PCC foundation rendering 15 mm in CM (1:6), applying two coats and cement base paints and supported on 04 Nos angle iron with concrete base.

There are certain common items for B/R and E/M portion in BOQ. The quantities of these common items have been clubbed to avoid duplicacy of similar items.

Deduction to be made from BOQ for Schedule 'A' Part-III (Credit Schedule from dismantling / taking down items) worth Rs 1,10,739.00 during AOC. (Note :- Tenderers shall not quote for this Schedule)

M/S FAROOQ AND SONS (BID ID -3305754)

M/S SA INFRATECH (BID ID -3307034)

M/S GULZAR ENTERPRISES (BID ID -3304416)

M/S M.R. Construction (BID ID -3307084)

M/S Abdul Ahad Rather (BID ID -3306964)

M/s PARVAZ CONSTRUCTION COMPANY (BID ID -3313026)

M/S LATIF AHMED MIR (BID ID -3311947)

M/S RATHER CONSTRUCTION CO (BID ID -3307391)